VideoStudio :: Share Step - Make DVD - No Preview Of Clips (trimming)
Jun 2, 2009
New PC (Dell) with Vista 32; re-installed first VS10+.
Because I have now Vista 32: I bought and installed a full VS12 (X2 PRO?).
Problem: when I go to the Share-step I can add clips to the project but I cannot see them in the right. So cannot add chapters or trim the clip in the share step. The buttons below the preview window stays inactive.
When I go further: I cannot see the preview of the video "Press 'play' button to start preview" stays on the screen.
When I go further till burning (DVD-folder), the program makes the folder.
View 13 Replies
ADVERTISEMENT
Mar 24, 2011
I have been meaning to ask this question when using previous versions but forgot so here goes Now using ProX4 (boxed upgrade) and it has the same prob as with previous versions namely that when on the Share step and adding a music file to one of the Gallery intro scenes I have not found any way to control the volume of that sound as it blares out LOUD on preview and in the final DVD video. If the viewer of the DVD video subsequently lowers that sound level then the sound level is too low for the following video. I have made a sound file at the sound level I need but even that is ignored and the sound on the intro screen is LOUD again. Corel Support advised me that I can adjust the volume when in the preview prior to butning but that does not affect the level on the final DVDF.
View 14 Replies
View Related
Mar 7, 2012
I'm using videostudio 4pro... I find that if I apply pic-in-pic on any video clip I can no longer hear the audio when previewing a clip. I have to choose project to hear audio. To hear the audio I must split the audio track from the video track... is this the only way to preview audio for a clip once I apply pic-in-pic?
View 1 Replies
View Related
Jan 30, 2013
I recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 Replies
View Related
Dec 2, 2011
Firstly note I am using Videostudio Pro X4.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
View 4 Replies
View Related
Nov 28, 2010
I'd like to trim mts video clips and save these trimmed clips in the same mts format (to avoid losses due to re-rendering in another format). It seems that there are no mts output options available (all hi-def options save the trimmed clip in mpeg format).
View 5 Replies
View Related
May 8, 2012
I can't seem to trim a clip in the overlay track. When I'm scrubbing through it the F3 and F4 keys will not work. This is a clip that I have already used Multi-trim to create.
View 2 Replies
View Related
Feb 17, 2014
Even though I've made sure that my sequence settings are exactly matching my clip settings (ProRes4444 or 422HQ) I'm getting a yellow bar over my sequence.
I'm working on a 2012 Mac Pro running OS 10.7.5. I downloaded Premiere Pro CC earlier today; I thought I'd play around with it to see how it compares to FCP7. Most of my NLE usage is very simple, just assembling sections of motion graphics and 3D animations rendered out of After Effects in the ProRes 4444 codec.
The "New Sequence from Clip" function isn't behaving as I'd expect. The comparable feature in FCP creates a sequence that matches all aspects of the selected clip (size, framerate, codec, etc.). The Premiere implementation appears to only match the sequence size and framerate to the selected clip.
If I create a new sequence from a ProRes clip, or tell the sequence to match the clip, I'd expect that clip to be sitting in my timeline with no bar of any color. But I get a yellow bar. When I go to Sequence Settings I see that the editing mode is Arri Camera, and the Video Preview is greyed out on an MPEG format. I have to go to Custom and manually select Quicktime, then specifiy the matching ProRes codec. Shouldn't those wrapper and codec settings be matched automatically too when I've specified that function?
That said, if I go in and manually match the codec settings to my clip I still get the yellow bar. If I select another sequence and click back on the new sequence the yellow bar is gone.
I'm assuming that this yellow bar issue is a display error of some sort, because if I export the sequence with "Match Sequence Settings" selected the export happens very quickly as I would expect with a Smart Render-compatible sequence.
View 2 Replies
View Related
Sep 28, 2013
I tried reimporting the video and translating it to another format, I've rendered it fully, and deleted temp files and re-rendered it. I rebuilt the video from scratch in a new sequence created from the clip (all clips were screencaptured using Camstudio so they're the same exact format as each other.
But I still have constant problems with videos not playing properly in preview. The last time I had this problem, they rendered that way too. When I hit the spacebar to view the video, it shows a bit of the video, then rewinds and plays the same section over and over, moving a little further forward each time. Basically "rubberbanding".
It's Premiere Pro CS 5.5.2
Win 7 64
No third party codecs.
I have plenty of hard drive space and 8 gb of ram. I do have browsers open which use a lot of memory, but all the other clips are working so that doesn't seem like it should be an issue.I'm not using any kinds of plugins or third-party things.
Shutting other memory hogging programs and restarting Premiere.Things that seem to hurt: using the time slider to increase or decrease speed of the video.
View 9 Replies
View Related
Aug 7, 2011
I’ve just produced a short video, intended for Youtube, but in the ‘Share – create video file’ step can find no options to produce an mp4 file in 16:9. My preferences were set to 16:9 right from the start and all the material is either originally 16:9 or cropped to 16:9, so it would be nice to produce the video as 16:9. I tried a few other file type options that I thought might be suitable for uploading but can’t find anything on offer that would produce a small file size in 16:9.
View 9 Replies
View Related
Jun 6, 2013
I'm running VideoStudio Pro X5. I spent all day yesterday on a little project and wanted to get it to youtube afterward. Unfortunately, none of my share options seem to be working! I've tried creating a disc, creating a video file, and uploading directly to youtube, but after everytime I try, I get an error message and VideoStudio closes out. I tried with the demo of X6 as well. The error message says APPCLOSE and gives the dump file, I believe.
View 2 Replies
View Related
Aug 16, 2013
I have been using this great and just now I lost the ability to open a share module. I can see the module but there are no options in the module so I am unable to do any share with it. What happened to the share module and how do I get it back? Also while looking at the I clicked on the capture module and it is not showing any option either. It looks like I have lost these. So now I can neither capture or share. The edit seems to be working but not the others. I have rebooted the computer and that did not work.
View 3 Replies
View Related
May 22, 2012
My video won't share as a MPEG-4 HD. Here are the steps I take:
1. Click the "Share" Tab
2. Click "Create Video File"
3. Click "MPEG-4"
4. Click "MPEG-4 HD
5. Select the destination folder for the output
6. Click "Save".
The progress shows 0% and the progress bar goes away after fifteen seconds. I am sharing it as an MPEG-4 HD file because it will be placed on Youtube by someone else. I've probably done four of these projects the same way and they execute just fine.
Here's some more informtion:
Brand: Dell Laptop
HDD: 464GB; Used Space 153GB; Free Space 311GB
Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz
Ram: 8GB
System Type: 64 Bit Operating System
Pen and Touch: Pen and Touch is available through 80 touch points
The video is a WMV2, 24 bits 1024 x768, 29.982 frames/second; Audio is windows media audio version 4, aspect ratio is 1.33 x 1.00. It is editable.
Here's how my timeline looks:
BLACK GRAPHIC = 2 SECONDS; TRANSITION (FADE TO BLACK) = 2 SECONDS; 10 SECOND CLIP; 3 SECOND CLIP; 00:42:33 CLIP.
View 13 Replies
View Related
Jun 30, 2013
Video Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
View 8 Replies
View Related
Oct 22, 2011
I have Pro X2 sotware. I have tried very unsuccsessfully to record onto a DVD disc from my video Share panel. I can get onto the template dialogue box, when I press next to record on the Disc, it goes to back, and will not go on to the next dialogue box.
I have plenty of memory and Ram. I use Windows 7. I can get onto Pro X2 ok and can download to create a video file, but I cannot create a disc.
View 9 Replies
View Related
Apr 16, 2008
I'm trying to make two pads share a curved edge but they just dont seem to be able to do so. I have to leave a gap between the two pads. If i snap the edge together, while the computer regenerates an error pops up saying pads can share edges but cannot overlap. Whats the deal yo?
View 5 Replies
View Related
Nov 7, 2013
Can I make a STEP or IGES file from a 2013 Inventor Shrinkwrap file?
View 3 Replies
View Related
Oct 13, 2011
I set up a Form in Inventor using parameters that are driven from Excel. I cannot edit the form.
View 6 Replies
View Related
Mar 23, 2012
I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec
Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames
Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness.
[URL]...........
PS MediiaInfo
General
Complete name : D:2012_03_22 Lorikeets.AVI
Format : AVI
Format/Info : Audio Video Interleave
File size : 25.6 MiB
Duration : 30s 0ms
Overall bit rate : 7 167 Kbps
Video
ID : 0
Format : AVC
Format/Info : Advanced Video Codec
Format profile : Main@L5.0
Format settings, CABAC : Yes
Format settings, ReFrames : 1 frame
Format settings, GOP : M=1, N=15
Codec ID : H264
Duration : 30s 0ms
Bit rate : 6 519 Kbps
Width : 1 440 pixels
Height : 1 080 pixels
Display aspect ratio : 4:3
Frame rate : 15.000 fps
Color space : YUV
Chroma subsampling : 4:2:0
Bit depth : 8 bits
Scan type : Progressive
Bits/(Pixel*Frame) : 0.279
Stream size : 23.3 MiB (91%)
Audio
ID : 1
Format : PCM
Format settings, Endianness : Little
Format settings, Sign : Signed
Codec ID : 1
Duration : 30s 0ms
Bit rate mode : Constant
Bit rate : 512 Kbps
Channel(s) : 1 channel
Sampling rate : 32.0 KHz
Bit depth : 16 bits
Stream size : 1.83 MiB (7%)
Interleave, duration : 1000 ms (15.00 video frames)
View 14 Replies
View Related
Jan 22, 2012
I am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
View 2 Replies
View Related
Nov 29, 2011
is there a way to share "create final video" in 1024x768 mp4 h264?
because my source video is in 1024x768. i can create final video in 640x480 but quality is lower. and when i create final video in 1280x720 or in 1920 x 1080.(presets of MPEG-4 in videostudio x4), i always get black borders on sides and ALSO under and above.
View 4 Replies
View Related
Sep 26, 2013
I have a Command Method which has a loop that opens and commits transactions until the user is finished with it and exits.
I would like each transaction to be undone separately but the undo command undoes the CommandMethod (along with all the transactions that occurred while in the loop)
Do I need to use the COM StartUndoMark and EndUndoMark to get this working?
View 3 Replies
View Related
Feb 22, 2013
I have somehow reversed the process of changing a sky in my photo so that when I get to the point of painting in the sky from the 2nd photo, it is painting with white (not black) that brings out the background I want on the original photo. Where have I gone wrong? Is there anywhere I can go to find a detailed step-by-step process for doing Layer Masks?
View 1 Replies
View Related
Mar 20, 2011
Why is the "User Define" Button grayed out under share/create video file/various HD selections and only the SD 720X480 max and lower available?
View 9 Replies
View Related
Mar 18, 2012
Is there a way to customize menus or add buttons to the control bar to make repetitive operations single step. Thinking specifically of adding an import button somewhere (similar to PS Elements 2) in which the current scanning settings are stored. Presently it takes about 6 steps through the menu to accomplish this.
View 3 Replies
View Related
Jan 16, 2013
Make a current, parent image, pattern step and repeat at an exact distance from the parent.
I have a parent image 4.75"long X 2.00" high image I want the pattern repeated in the Y direction every 2.10" or with a .10" space between the images, to create a 1XN array or tiles or pattern?
I then want to print the new tiled, array image to the exact size.
View 2 Replies
View Related
Dec 18, 2008
I have CTR-Z mapped to step backward.
Using two different shortcuts for "undo" (one step back) and "Step Backward" (Multiple steps back) makes no sense to me. As such, I rarely use the regular undo, and do not have it mapped.
The case:
When I switch to a new layer, do a brush stroke and undo it, photoshop treats my undo as a switch back to the layer I came from. This happens a LOT, and not just to me, but to a lot of designers I know (I'm a GUI designer at a game company). Some of them have even formed a habit of "erasing" a bit in an empty part of the layer, just in case the'd later want to undo. That's bad.
My proposed solution:
-First undo my stroke, Leave my selected layer alone.
-On a NEXT press of "Step backward" change my current layer to the one I came from.
View 10 Replies
View Related
Feb 17, 2014
How can I view a preview how all the video transition looks between 2 clips in Premiere Pro CS5 before I choose the one I want to use.
I always use Adobe Bridge CS5 when I need to see a fosmag on the effects in After Effects CS5, but can not get it to work and then I can also see the Video Transitions in Adobe Premiere CS5
View 1 Replies
View Related
Apr 3, 2012
All of a sudden my Videostudio X4 will not play any clip for longer then a second or two. When you play a clip or the project it plays for 1 or 2 seconds and stops just like you hit the stop or pause button. Click play again and it does the same thing. Makes it really impossible to edit. It had been working great up until last week. I tried uninstalling and reinstalling but still have the same problem. I have excluded my anti virus from scanning the Corel folder.
View 1 Replies
View Related
Sep 13, 2012
So I drag and drop a bunch of video files into the timeline and want to mute them all in one easy step. It would seem that all you would need to do it right click and mute while they are still all selected from the import but the mute setting isn't active. meaning I have to mute each clip separately. That takes a LONG time.
View 3 Replies
View Related
Apr 6, 2013
Can I rename the sound clips to something more sensible and explanatory without causing any problems?
View 2 Replies
View Related
