I have been using this great and just now I lost the ability to open a share module. I can see the module but there are no options in the module so I am unable to do any share with it. What happened to the share module and how do I get it back? Also while looking at the I clicked on the capture module and it is not showing any option either. It looks like I have lost these. So now I can neither capture or share. The edit seems to be working but not the others. I have rebooted the computer and that did not work.
I have lost all changes that I made in the develop module. Most of these photos where stacked with the raw copy on top of the jpeg. Then I had picked the ones I liked and make changes to them in the develop module. Then I and changed them to DNG. This was over two weeks ago and I think I was trying to put them in to a collection. Now all I see is the originals as they appeared on the day they where imported.
Using LR5 on my MacBook Pro I have recently lost the "basic" and "colour" pallets from thr right hand side in the Develop Module. How can I get them back?
LR 5.3, Develop module - I seem to have lost all my options under Camera Calibrate. All I have now is Camera Standard and Matrix, where I used to have a slew of options. I'm still using the same camera and lenses, which are known to Adobe, processing RAW files.
I’ve just produced a short video, intended for Youtube, but in the ‘Share – create video file’ step can find no options to produce an mp4 file in 16:9. My preferences were set to 16:9 right from the start and all the material is either originally 16:9 or cropped to 16:9, so it would be nice to produce the video as 16:9. I tried a few other file type options that I thought might be suitable for uploading but can’t find anything on offer that would produce a small file size in 16:9.
I'm running VideoStudio Pro X5. I spent all day yesterday on a little project and wanted to get it to youtube afterward. Unfortunately, none of my share options seem to be working! I've tried creating a disc, creating a video file, and uploading directly to youtube, but after everytime I try, I get an error message and VideoStudio closes out. I tried with the demo of X6 as well. The error message says APPCLOSE and gives the dump file, I believe.
My video won't share as a MPEG-4 HD. Here are the steps I take:
1. Click the "Share" Tab 2. Click "Create Video File" 3. Click "MPEG-4" 4. Click "MPEG-4 HD 5. Select the destination folder for the output 6. Click "Save".
The progress shows 0% and the progress bar goes away after fifteen seconds. I am sharing it as an MPEG-4 HD file because it will be placed on Youtube by someone else. I've probably done four of these projects the same way and they execute just fine.
Here's some more informtion:
Brand: Dell Laptop HDD: 464GB; Used Space 153GB; Free Space 311GB Processsor Intel(R) Cor (TM) i7 CPU Q820 #1.73GHz 1.73GHz Ram: 8GB System Type: 64 Bit Operating System Pen and Touch: Pen and Touch is available through 80 touch points The video is a WMV2, 24 bits 1024 x768, 29.982 frames/second; Audio is windows media audio version 4, aspect ratio is 1.33 x 1.00. It is editable.
Here's how my timeline looks:
BLACK GRAPHIC = 2 SECONDS; TRANSITION (FADE TO BLACK) = 2 SECONDS; 10 SECOND CLIP; 3 SECOND CLIP; 00:42:33 CLIP.
Video Studio Pro X5: I've saved a project with several clips and then tried to "Share" the video using Create Video File. After I get to the Save screen and click Save with a filename, nothing happens - it does not start rendering and no file is saved. But then I saved a short clip from the same file as a separate Project File, and I was able to create a video file or the short clip.
What would cause Share not to be able to create a Video File from a Project File?
I have Pro X2 sotware. I have tried very unsuccsessfully to record onto a DVD disc from my video Share panel. I can get onto the template dialogue box, when I press next to record on the Disc, it goes to back, and will not go on to the next dialogue box.
I have plenty of memory and Ram. I use Windows 7. I can get onto Pro X2 ok and can download to create a video file, but I cannot create a disc.
I have upgraded to X5 (15.0.0.258) Windows 7 64-bit QuickTime Player 7.7.1 K-Lite_Codec_Pack_840_Basic.exe
I am using an input file of:
a 30 second .avi file, frame size 1440 x 1080 15 frames/sec Video compression Microsoft DTV-DVD Video Decoder, 24 bits, total 450 frames Audio compression PCM 32.000 kHz, 16 bit Mono 960,000 samples.
I was using X3 version [URL].......
If all I do is clip the .avi to a 10 second output (eg .mpg, .mpg, .wmv) with no editing, I get a jerky movie (which appears to be one frame per second).
I have put up a 10 second clip here to show a sample of the jerkiness (which was created using x3) but it is the same jerkiness. [URL]...........
PS MediiaInfo General Complete name : D:2012_03_22 Lorikeets.AVI Format : AVI Format/Info : Audio Video Interleave File size : 25.6 MiB Duration : 30s 0ms Overall bit rate : 7 167 Kbps
Video ID : 0 Format : AVC Format/Info : Advanced Video Codec Format profile : Main@L5.0 Format settings, CABAC : Yes Format settings, ReFrames : 1 frame Format settings, GOP : M=1, N=15 Codec ID : H264 Duration : 30s 0ms Bit rate : 6 519 Kbps Width : 1 440 pixels Height : 1 080 pixels Display aspect ratio : 4:3 Frame rate : 15.000 fps Color space : YUV Chroma subsampling : 4:2:0 Bit depth : 8 bits Scan type : Progressive Bits/(Pixel*Frame) : 0.279 Stream size : 23.3 MiB (91%)
Audio ID : 1 Format : PCM Format settings, Endianness : Little Format settings, Sign : Signed Codec ID : 1 Duration : 30s 0ms Bit rate mode : Constant Bit rate : 512 Kbps Channel(s) : 1 channel Sampling rate : 32.0 KHz Bit depth : 16 bits Stream size : 1.83 MiB (7%) Interleave, duration : 1000 ms (15.00 video frames)
I am having a very difficult time trying to figure out what is wrong with my audio in VSPx4.
When I put a video in the timeline and click on it so it is on the "clip" the video plays fine but the minute I switch it to "project" the audio dissappears. If I render it in any format, the audio doesn't return. Also, if I multi-trimm a video I am no longer able to get audio either.
Lastly, if I split the audio from the video I cannot play the project at all. It just gives me a frozen screen...
I have re-installed VSPx4 and have all the patches updated.
is there a way to share "create final video" in 1024x768 mp4 h264?
because my source video is in 1024x768. i can create final video in 640x480 but quality is lower. and when i create final video in 1280x720 or in 1920 x 1080.(presets of MPEG-4 in videostudio x4), i always get black borders on sides and ALSO under and above.
New PC (Dell) with Vista 32; re-installed first VS10+.
Because I have now Vista 32: I bought and installed a full VS12 (X2 PRO?).
Problem: when I go to the Share-step I can add clips to the project but I cannot see them in the right. So cannot add chapters or trim the clip in the share step. The buttons below the preview window stays inactive.
When I go further: I cannot see the preview of the video "Press 'play' button to start preview" stays on the screen.
When I go further till burning (DVD-folder), the program makes the folder.
I have been meaning to ask this question when using previous versions but forgot so here goes Now using ProX4 (boxed upgrade) and it has the same prob as with previous versions namely that when on the Share step and adding a music file to one of the Gallery intro scenes I have not found any way to control the volume of that sound as it blares out LOUD on preview and in the final DVD video. If the viewer of the DVD video subsequently lowers that sound level then the sound level is too low for the following video. I have made a sound file at the sound level I need but even that is ignored and the sound on the intro screen is LOUD again. Corel Support advised me that I can adjust the volume when in the preview prior to butning but that does not affect the level on the final DVDF.
I've failed to get any sounds out of my version on my desktop even after uninstalling/reinstalling?? I have a version working well on my laptop. What can be the problem? It is a 'trial' version but I have paid for it and have a key but it doesn't seem to want me to enter it and there's no 'buy now' on drop-down menu in 'preferences'.
I've been using VS pro X2, but since getting Win 7 I got X3 for stability. This is the first time I've actually used it for a new video. Yesterday I had all of my titles available to me in X3, and was making a new video with them. After unsuccessfully attempting to open an X2 file (for some reason NONE of my X2 files will open in X3, VERY frustrating) for comparison, I opened X2 after closing X3. When I went in to open X3 again, ALL but 2 of my titles are now gone, and I only have 3 transitions (I have about 15 or so in X2). Where are all my effects and titles?
Corel have just released the alternative authoring module for X3, in response to our complaints about the existing one. It is in fact a reworked version of Movie Factory 7 Pro, but now has the SE (Special Edition) letters worked into its title.
I have been one of the lucky people who have had the full version of MF7 since its original limited release. (For some unknown marketing reason, Corel limited MF 7 Pro to Asia/Oceania and possibly Europe.) I also acted as one of the Beta testers of this SE release. Like its predecessors it works extremely well.
The release, unfortunately for some, is being done by the same method as the other updates for X3: via the Get More function. I have not yet been given a URL where it can be downloaded separately. In fact, I am rather doubtful that such an URL will be released since Corel obviously wish to restrict downloads to those who have a copy of X3.
I suspect a downside is that for new users of X3, it will again take 3 days for the download of MF7 SE to appear. (This strangely enough will include me as I just bought a new computer yesterday, and have installed X3 on it. But as yet -- unsurprisingly -- I don't even have the template packs showing in the Get More tab! But I guess I can install the full MF 7 Pro on this machine...)
MF7 SE has a virtually identical appearance to the full verions of MF7 and its predecessors, and a close similarity to the burning module of VS X2 and its predecessors. It will thus be very easy for users of previous versions to use.
It should be noted that the main limitation of this SE version is that it requires the user to first produce a final version of a video in X3. Then you open MF7 SE and insert that video or videos for authoring as normal. It will not accept project files from X3.
I have recently bought the upgraded version of vsx2 (upgraded from vs10) and AGAIN i have experienced lost video filters.
The symptoms are slightly different, "video filters" are still listed in the drop down menu but when I click on them a tab pops up that read "all" when I click on that the library clears and only empty space is there, no filters. Is the fix the same as it was for VS10?
I am using VSP X3 Pro on a Windows 7 Professional 64bit PC. Input video files are AVCHD from a Canon SX 210s camera.
Picture format is QuickTime 1280x720, 24bit, frame rate 29.97, sound 16bit little Endian, 48000kHz, 16bit stereo. Files copied from an SD card.
I find that if I insert transition effects I lose the original recorded audio from that point forward in the clip that follows. If I do not use transition effects then the audio is fine. If I subsequently remove the transition then the audio is restored. It appears the transitions are the root cause of the problem. Identical problem if I use my Windows 7 32 bit laptop. The audio track remains visible in the timeline even when no sound can be heard.
Based on a previous suggestion I've used a workaround by converting the clips to a different format before editing. Using AVI, the audio in clips following a transition file is not lost but the video quality is seriously degraded.
I've reinstalled the software & all the three available patches. The problem has been around ever since I moved to my new PC on Windows 7.
While working on vspx2 it locked up. Rebooted and discovered that my main hard drive was not detected. My computer guy got it working again, but my hundreds of files (images, video clips, titles, audio clips) that I had stored in vspx2 library, so neatly organised, had disappeared. It became like it was when I first bought it. Everything was gone from the library, though they were still on hard drives. scattered everywhere.
After reviewing some of my rendered videos, I find out that most (if not all) of them lose or add a few frames during the rendering. This seems to happen within the first 30 seconds of my 3 minutes clips. My orginal MPEG2 files are OK, but not the rendered MPEG, after editing. To make sure of that, I review them in my Pro X4, I place the original on my main track, and I put the rendered MPEG on the overlay. I can then pin point the exact frame where that problem appears. My original file is of good quality and has been captured wih a hard disk camcorder (Sony SR100).
I use VS ver 10.0 and during working on a project there were no problems. I use different files (audio and video) and after rendering lost some mpg audio files. Video is still there but audio is muted. wma and one mpg files works fine.
Project properties: PAL (25 fps) MPEG files 24 bits, 720 x 576, 25 fps Lower Field First (DVD-PAL), 16:9 Video data rate: Variable (Max. 8000 kbps) Audio data rate: 224 kbps MPEG audio layer 2, 48 KHz, Stereo
wma file properties (works fine after rendering):
mpg files, different ones (works fine after rendering):
VSP5 Ultimite: I opened a saved project and then went to share, and a different DVD menu showed up, one for another project! Like others, I struggle with having to re-create the DVD menu after editing the project. But if I use Smart Package and open the VSP from another location, the Burn module opens in virgin fashion.
I am using VS X3 and recently have a problem with it. At the time moive created there are couple clips in dark but they were ok when I edited them in the project status.
I recently had a senior moment, sigh. I ended up deleting my video 5 ultimate . I finally installed it back again, For some reason, x4 samplesvideoPo3 UVP files doesn't exist. Actually I had Studio prox5,prior to buying the ultimate program. I also have problems with my auto music, cant find those files. I didn't think that I had the files from pro X 5. still in my computer, Is it possible to reinstall the prox5 and the missing files will be back where they should be?
Recently upgraded to X3 despite reservations on the 'Burn' capabilities (see many threads in this forum). Having completed a project I now want to burn a DVD. The options available in X3 do not excite me - it seems that there is a forced exit from X2 into either DVD Factory Pro or DVD MovieFactory 7 SE. Played with these but then breached my low boredom threshold (is it worth persevering with either of them? Both look a bit Mickey-Mouse)
Decided to fire-up my trusty copy of X2 and do the burn in that.
On the first screen I noticed that the 'Next' button is partially obscured by the 'Setting and Options' button. But enough is visible to proceed to next screen. But problem arises on next screen where 'Next' button has now become 'Back' button and 'Next' button is no longer visible. Therefore I can only go backwards but not forwards (a metaphor for life?)
Have tried an uninstall and reinstall of X2 but problem remains exactly the same. Did not have this problem before I installed X3 (on same computer).
Questions:
1. Is there a keyboard shortcut that will take me to the next screen when in Burn mode? 2. Is it worth persevering with either of the burn options in X3 or are both inferior to the X2 burn?
In video studio pro x4: At step 3 "share" I can create a video file like an mpeg, and it will retain all "nudges" I perform on the audio waveform of the music tracks (to keep volume down during a narration moment) . But when I burn a disk.....the music file plays like it's never been adjusted (full volume) when playing disc.
