VideoStudio :: Lost Or Repeated Frames In Pro X4?
Aug 27, 2011
After reviewing some of my rendered videos, I find out that most (if not all) of them lose or add a few frames during the rendering. This seems to happen within the first 30 seconds of my 3 minutes clips. My orginal MPEG2 files are OK, but not the rendered MPEG, after editing. To make sure of that, I review them in my Pro X4, I place the original on my main track, and I put the rendered MPEG on the overlay. I can then pin point the exact frame where that problem appears. My original file is of good quality and has been captured wih a hard disk camcorder (Sony SR100).
View 14 Replies
ADVERTISEMENT
Jun 20, 2011
I have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
View 10 Replies
View Related
Oct 26, 2010
It occurs only in Corel Video Studio Pro X3 ... two extra (frozen) frames for free. In other programs all frames of my camera act correct.
At the beginning of each video file there are two extra frames at the timeline, so each video file starts with three identical frames and that causes each file starts with 0,12 sec frozen video.
When I remove the two frames, two frozen frames are added at the end if a file! In the end-product there are three frozen frames between each cut! And 0,12 seconds is visible …
View 14 Replies
View Related
Aug 28, 2010
Trying to take a chunk of frames out of the middle of a clip. The manual says:
"The Navigation Panel is used to preview and edit the clips used in your project. Use the Navigation Controls to move around a selected clip or your project. Use the Trim Markers and Scrubber to edit your clips."
I have done that. Trim Markers set to start and end of frames to be removed. So what is next? Where is the magic button that removes the unwanted frames? Have tried Delete but nothing apparently changes.
While I am at it, how do the scissors work? Can click on them at the start of a series of frames but they become greyed out after that.
Have done a lot of stuff in Windows Movie Maker, which was much more straightforward, but unfortunately it can't cope with HD. VSX3 manual is good at giving you various different ways of selecting frames for deletion, but seems to miss out on the punch line: "now do this to delete them".
View 11 Replies
View Related
Jan 28, 2013
Is it possible to make a project with 28.214 frames per second? My Samsung Galaxy makes videos with 28.214 per second.
View 2 Replies
View Related
Oct 28, 2011
I place a live music video clip in the timeline. I add the audio clip from a Zoom H2 to the timeline. I sync it up at the beginning matching the audio from the video clip. When I check it 25 minutes into the project the sync is no longer exact. If I slide the audio clip up two frames it is synced at the 25 minute mark but now it's not exact in the beginning. I need to use both sources of audio.
View 5 Replies
View Related
Apr 7, 2011
I'm seeing random occurrences of single all-red frames in my output. They seem to occur in the middle of a clip.
My clips are AVCHD (HDV captures from a Sony HDR-FX7 via Firewire using HDVSplit). I'm outputting them to "HDV 720p - 30p (for PC)". Total edited projects are 9-10 minutes each and I'm seeing 2-3 of these "red frames" per output file.
View 3 Replies
View Related
Oct 13, 2013
I'd like to know if it's possible, and if so, how to do it..... in X5, to insert multiple images into their own single frames, at one time. Say I have images 1.jpg - 250.jpg, and I want all to be loaded into single frames... for an animation.
View 2 Replies
View Related
Jun 28, 2011
I'm using Ulead VS 11. When I make a clip and render it as new video, the new video is repeating frames all over the place. As it renders I can see it happening. It's like the video renders minute/second 1:01, then jumps back to 1:00, then re-renders 1:01. All over the place. These repeat frames are not in the original video.
The format of the original video is MPEG2, 8000 bps, and is being converted to WMV (don't ask!). I have found that the only way to retain any semblance of quality in the new video is to change it to WMV, and for my purposes, this is adequate. I have tried about 10 of the different output formats offered in the "Create Video" option, including saving with settings the same as project settings, and the result is the same, with the exception that the WMV 720 is the only one where a decent quality is maintained. That's a whole other question -- why rendering with "same as project settings" gives me total junk.
Is there some other setting that could be causing these frame repeats? I don't believe I had these problems when the original video was WMV rendering to WMV. But MPEG2 to MPEG2 is not fixing it either, so there must be something else.
View 8 Replies
View Related
Nov 30, 2011
I have a very unusual problem and I can't work it out. I have 1920x1080 clips in AVCHD format taken from my Full HD Digital movie Camera. It's a cheapy - Kogan! When I place all the clips together in Studio Pro 4 and render the video outpout or even preview in the clip window I get the frames splitting above and below the frame. The clips play fine in all players and as you can see in the second attachment is the Pro preview player compared to Media classic which renders the clip correctly.
You can see the top and bottom of the frame is duplicated on every transition or start of next clip
View 3 Replies
View Related
Oct 17, 2011
I have taken a short video of a man sitting at a table. There is no movement but the man is talking. A little bit of the microphone can be seen. I tried to take the video into Paintshop Pro X3 to remove this object with smart carver. Is there a way to edit this video so that unwanted objects can be removed from the frames. I have Paintshop Pro X3 on this computer, and PhotoImpact on another computer. Can either of these programs be used to remove objects from frames.?
View 1 Replies
View Related
Jan 29, 2013
I have a full HD video, a 1920x1080 resolution
I need to export video frames to images, jpeg for example, I use "Edit / Take a snapshot" from VideoStudio Pro X4 menu, but this option only exports 1024 x 576 resolution images....Can I export 1920 x 1080 resolution images?
View 1 Replies
View Related
Aug 24, 2011
I have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
View 12 Replies
View Related
May 24, 2013
can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies
View Related
Feb 5, 2012
I've failed to get any sounds out of my version on my desktop even after uninstalling/reinstalling?? I have a version working well on my laptop. What can be the problem? It is a 'trial' version but I have paid for it and have a key but it doesn't seem to want me to enter it and there's no 'buy now' on drop-down menu in 'preferences'.
View 2 Replies
View Related
Apr 27, 2011
Somehow VS X4 has forgot several of the avi codecs on my Vista machine.
vsx4_avi options-vista.png (10.25 KiB) Viewed 968 times
View 10 Replies
View Related
Apr 25, 2011
I've been using VS pro X2, but since getting Win 7 I got X3 for stability. This is the first time I've actually used it for a new video. Yesterday I had all of my titles available to me in X3, and was making a new video with them. After unsuccessfully attempting to open an X2 file (for some reason NONE of my X2 files will open in X3, VERY frustrating) for comparison, I opened X2 after closing X3. When I went in to open X3 again, ALL but 2 of my titles are now gone, and I only have 3 transitions (I have about 15 or so in X2). Where are all my effects and titles?
View 4 Replies
View Related
Jan 18, 2009
I have recently bought the upgraded version of vsx2 (upgraded from vs10) and AGAIN i have experienced lost video filters.
The symptoms are slightly different, "video filters" are still listed in the drop down menu but when I click on them a tab pops up that read "all" when I click on that the library clears and only empty space is there, no filters. Is the fix the same as it was for VS10?
View 5 Replies
View Related
Feb 20, 2012
I am using VSP X3 Pro on a Windows 7 Professional 64bit PC. Input video files are AVCHD from a Canon SX 210s camera.
Picture format is QuickTime 1280x720, 24bit, frame rate 29.97, sound 16bit little Endian, 48000kHz, 16bit stereo. Files copied from an SD card.
I find that if I insert transition effects I lose the original recorded audio from that point forward in the clip that follows. If I do not use transition effects then the audio is fine. If I subsequently remove the transition then the audio is restored. It appears the transitions are the root cause of the problem. Identical problem if I use my Windows 7 32 bit laptop. The audio track remains visible in the timeline even when no sound can be heard.
Based on a previous suggestion I've used a workaround by converting the clips to a different format before editing. Using AVI, the audio in clips following a transition file is not lost but the video quality is seriously degraded.
I've reinstalled the software & all the three available patches. The problem has been around ever since I moved to my new PC on Windows 7.
View 14 Replies
View Related
Oct 23, 2010
While working on vspx2 it locked up. Rebooted and discovered that my main hard drive was not detected. My computer guy got it working again, but my hundreds of files (images, video clips, titles, audio clips) that I had stored in vspx2 library, so neatly organised, had disappeared. It became like it was when I first bought it. Everything was gone from the library, though they were still on hard drives. scattered everywhere.
View 5 Replies
View Related
Aug 16, 2013
I have been using this great and just now I lost the ability to open a share module. I can see the module but there are no options in the module so I am unable to do any share with it. What happened to the share module and how do I get it back? Also while looking at the I clicked on the capture module and it is not showing any option either. It looks like I have lost these. So now I can neither capture or share. The edit seems to be working but not the others. I have rebooted the computer and that did not work.
View 3 Replies
View Related
Jun 25, 2013
I use VS ver 10.0 and during working on a project there were no problems. I use different files (audio and video) and after rendering lost some mpg audio files. Video is still there but audio is muted. wma and one mpg files works fine.
Project properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 224 kbps
MPEG audio layer 2, 48 KHz, Stereo
wma file properties (works fine after rendering):
mpg files, different ones (works fine after rendering):
mpg files (do not work, muted):
Is it possible to save them (muted audio)?
View 7 Replies
View Related
Nov 13, 2012
I down loaded a movie from a COOLPIX AW100 camera to PRO X4, it is a *.mov file, in AVC, MPG4, 29.97 frames/sec format.
When I ran it, it appeared to be jumpy, so I when went frame by frame, I noticed there were duplicate frames at the points were the hesitation occurred.
I have no problems with my FZ100 clips in H246/MPG4 .
A strange thing happens when I view it in WINDOWS MEDIA PLAYER, it has NO duplicate frames, and appears smooth.
View 14 Replies
View Related
Aug 20, 2010
I have used earlier versions of VS in the past with virtually no issues , last version wbeing VS11 Plus. I recently "Upgraded" to VS Pro X2 and am trying to burn my first project with it. During the share stage, trying to make a DVD I get the message "Some chapter entry frame numbers exceed the total frames" and NO I did not edit the project after adding the chapters in the share stage. Seems from google searches that this is an old issue for which Ulead issued a patch in earlier versions, but it is back! One post suggested creating a video file of the whole project then importing that without creating a new project then sharing it and adding chapters.
I tried that and found that the audio for the second half of the project got dropped. If you press Info on the DVD player it displays Dolby 3/2 on the TV screen, but the AVamp shows no Blue Dolby multichannel light and detects no audio streams available. This dropping of audio occurs at a transition between two clips in the original project. The "missing" audio is present in the mpeg file created, and you can hear it if you play the file in the "Edit" tab. It simply does not get carried over to the disc burn. I tried twice. ANyway, that is a secondary issue and I'm not too bothered about that. I would much rather get a fix for the Chapter frame numbers issue and thus avoid the video file creation process.
I have tried taking a few frames out of each clip and re-rendering the whole project again to no avail. I have also tried deselecting two pass conversion.
View 14 Replies
View Related
Jul 9, 2011
I am trying out my new cam which can do video in 24p (23.something), and I can edit the clips, all ok. There are just two things I cannot do: Make a still (it's really the 24p material, I used a clip in 60i and stills worked), and changing the time/frame counter to 24 frames. No matter what I do, it will always stay there.
View 6 Replies
View Related
Jun 5, 2013
This is regarding a error message by Video Studio Pro X5 understanding a fault message which I got after creating a DVD map. This is the original message in Dutch: "Sommige startframenummers van hoofdstukken zijn groter dan het aantal frames". 533:-2147216477:0 Translation: "Some start frame numbers of chapters are greater than the number of frames"
This was also discussed here - but I can not understand the solution: viewtopic.php?t=24055&p=120629
The situation: I have all the same video files (H.264, 24 bits, 25.000 f/s) [worked with this kind of files a couple times and worked alway very well] I have added some tekst and pictures. Total length of video is 01:50 hour. Starting the procedure DVD creating, with burning the DVD folders on my harddisc. Afther the burning proces I got the fault message.
After creating the DVD map I got the fault message (as describbed above) and found on my harddisc the VIDEO_TS folder with 5 files VTS_01_1 till VTS_01_5. The total time of these loose files is ca. 76 minutes. So I missed a hughe chunk. I got the same fault message when I have created chapters within the videofile but also when I created chapters later at the video menu.
When I do not burning a DVD folder but select creating a video file (DVD-video) than I get separated end files instead of just one big file. Maybe this has the same cause?
View 14 Replies
View Related
Oct 15, 2010
I am using VS X3 and recently have a problem with it. At the time moive created there are couple clips in dark but they were ok when I edited them in the project status.
View 6 Replies
View Related
Jun 29, 2013
I recently had a senior moment, sigh. I ended up deleting my video 5 ultimate . I finally installed it back again, For some reason, x4 samplesvideoPo3 UVP files doesn't exist. Actually I had Studio prox5,prior to buying the ultimate program. I also have problems with my auto music, cant find those files. I didn't think that I had the files from pro X 5. still in my computer, Is it possible to reinstall the prox5 and the missing files will be back where they should be?
View 12 Replies
View Related
Oct 6, 2010
Recently upgraded to X3 despite reservations on the 'Burn' capabilities (see many threads in this forum). Having completed a project I now want to burn a DVD. The options available in X3 do not excite me - it seems that there is a forced exit from X2 into either DVD Factory Pro or DVD MovieFactory 7 SE. Played with these but then breached my low boredom threshold (is it worth persevering with either of them? Both look a bit Mickey-Mouse)
Decided to fire-up my trusty copy of X2 and do the burn in that.
On the first screen I noticed that the 'Next' button is partially obscured by the 'Setting and Options' button. But enough is visible to proceed to next screen. But problem arises on next screen where 'Next' button has now become 'Back' button and 'Next' button is no longer visible. Therefore I can only go backwards but not forwards (a metaphor for life?)
Have tried an uninstall and reinstall of X2 but problem remains exactly the same. Did not have this problem before I installed X3 (on same computer).
Questions:
1. Is there a keyboard shortcut that will take me to the next screen when in Burn mode?
2. Is it worth persevering with either of the burn options in X3 or are both inferior to the X2 burn?
View 3 Replies
View Related
Aug 13, 2012
In video studio pro x4: At step 3 "share" I can create a video file like an mpeg, and it will retain all "nudges" I perform on the audio waveform of the music tracks (to keep volume down during a narration moment) . But when I burn a disk.....the music file plays like it's never been adjusted (full volume) when playing disc.
View 4 Replies
View Related
Dec 11, 2011
I have been using Corel VideoStudio Pro X4 recently. I split a number of video files on a daily basis. This is what I do:
I take an Avi file that has a duration of about 30 minutes. I drag and drop the video into the "video track" area in the program.
Then I use the little "slider" thing and drag it to 15 minutes and click on the "scissors" symbol. which results in making the video split into 2 parts.
I delete the first part on the "video track" are and then I click on "share"-->"create video file"-->"custom"-->I choose Avi .
The compression I choose is Xvid Mpeg-4, 24 Bit RGB, and the Audio Format is Mpeg Layer 3, 8 Bits, 11.025 Hz Mono
The resulting video does not have any sound . This does not happen if I delete the 2nd part and create the video file with the first 15 minutes only. This happens with almost all of my videos (all of them are avi).
View 3 Replies
View Related
