VideoStudio :: Lost All Contents Of Library In Pro X2?
Oct 23, 2010
While working on vspx2 it locked up. Rebooted and discovered that my main hard drive was not detected. My computer guy got it working again, but my hundreds of files (images, video clips, titles, audio clips) that I had stored in vspx2 library, so neatly organised, had disappeared. It became like it was when I first bought it. Everything was gone from the library, though they were still on hard drives. scattered everywhere.
View 5 Replies
ADVERTISEMENT
Sep 22, 2006
Due to reinstalling VideoStudio 10 Plus because of a reported problem with Service Pack 1 [URL], I have lost the clips I placed in special Library Manager folders I had created. Are those gone for good or is there a way to relocate them on my computer?
View 8 Replies
View Related
Sep 30, 2013
I am using autocad 2013 and I face a serious problem
when I was working in file sudden it hang and say automation error file is busy
after close file and reopen again I found nothing in file
and size of file become small
and backup file have nothing also
View 6 Replies
View Related
Sep 10, 2013
We are facing strange issue with all different versions of AutoCAD (2007, 2011, 2013). While users are working on the file, all of a sudden the contents (work done) are lost and it becomes all blank. The file size is same but when we open the file all the work done is not displayed, but just a blank screen.
It happens occasionally and there is some Automation Error in the command line below. The software is not hanging but the open file is in hang state and we have to close it. While closing whether we select yes/no the content (work done) is all lost. The temp location where the files are saved in one of the computer is become huge around 40GB will many Autocad autosave and temporary files; if it has anything to do with it !
View 9 Replies
View Related
Jun 21, 2013
For some reason Library has disappeared from the top of screen so I must go to window to change from develope to library. I want library back to eliminate this step. I have tried updating and it did not bring it back.
View 8 Replies
View Related
Oct 30, 2010
I just got VS Pro X3 yesterday and installed it from the disk. All went fine, but there is a menu option on the disk for "Bonus Contents". When the menu option is clicked, it displays three sub-categories - Audio Clips, Image Clips, & Video Clips. When each of those sub-categories is clicked it opens a Windows Explorer window showing the contents of the folder on the install disk. I can't find anywhere that these clips got installed onto my PC.how do I install this Bonus Content, so that VS X3 can use it? If I just copy it to my hard drive, what folder to I place it into?
View 3 Replies
View Related
Oct 8, 2012
I have done but I am using lightroom 1.4. Previously, any pictures I edited would show as an edited file in the library now all that happens is the original image shows as the edited image.
View 2 Replies
View Related
Feb 5, 2012
I've failed to get any sounds out of my version on my desktop even after uninstalling/reinstalling?? I have a version working well on my laptop. What can be the problem? It is a 'trial' version but I have paid for it and have a key but it doesn't seem to want me to enter it and there's no 'buy now' on drop-down menu in 'preferences'.
View 2 Replies
View Related
Apr 27, 2011
Somehow VS X4 has forgot several of the avi codecs on my Vista machine.
vsx4_avi options-vista.png (10.25 KiB) Viewed 968 times
View 10 Replies
View Related
Apr 25, 2011
I've been using VS pro X2, but since getting Win 7 I got X3 for stability. This is the first time I've actually used it for a new video. Yesterday I had all of my titles available to me in X3, and was making a new video with them. After unsuccessfully attempting to open an X2 file (for some reason NONE of my X2 files will open in X3, VERY frustrating) for comparison, I opened X2 after closing X3. When I went in to open X3 again, ALL but 2 of my titles are now gone, and I only have 3 transitions (I have about 15 or so in X2). Where are all my effects and titles?
View 4 Replies
View Related
Jan 18, 2009
I have recently bought the upgraded version of vsx2 (upgraded from vs10) and AGAIN i have experienced lost video filters.
The symptoms are slightly different, "video filters" are still listed in the drop down menu but when I click on them a tab pops up that read "all" when I click on that the library clears and only empty space is there, no filters. Is the fix the same as it was for VS10?
View 5 Replies
View Related
Feb 20, 2012
I am using VSP X3 Pro on a Windows 7 Professional 64bit PC. Input video files are AVCHD from a Canon SX 210s camera.
Picture format is QuickTime 1280x720, 24bit, frame rate 29.97, sound 16bit little Endian, 48000kHz, 16bit stereo. Files copied from an SD card.
I find that if I insert transition effects I lose the original recorded audio from that point forward in the clip that follows. If I do not use transition effects then the audio is fine. If I subsequently remove the transition then the audio is restored. It appears the transitions are the root cause of the problem. Identical problem if I use my Windows 7 32 bit laptop. The audio track remains visible in the timeline even when no sound can be heard.
Based on a previous suggestion I've used a workaround by converting the clips to a different format before editing. Using AVI, the audio in clips following a transition file is not lost but the video quality is seriously degraded.
I've reinstalled the software & all the three available patches. The problem has been around ever since I moved to my new PC on Windows 7.
View 14 Replies
View Related
Aug 27, 2011
After reviewing some of my rendered videos, I find out that most (if not all) of them lose or add a few frames during the rendering. This seems to happen within the first 30 seconds of my 3 minutes clips. My orginal MPEG2 files are OK, but not the rendered MPEG, after editing. To make sure of that, I review them in my Pro X4, I place the original on my main track, and I put the rendered MPEG on the overlay. I can then pin point the exact frame where that problem appears. My original file is of good quality and has been captured wih a hard disk camcorder (Sony SR100).
View 14 Replies
View Related
Aug 16, 2013
I have been using this great and just now I lost the ability to open a share module. I can see the module but there are no options in the module so I am unable to do any share with it. What happened to the share module and how do I get it back? Also while looking at the I clicked on the capture module and it is not showing any option either. It looks like I have lost these. So now I can neither capture or share. The edit seems to be working but not the others. I have rebooted the computer and that did not work.
View 3 Replies
View Related
Jun 25, 2013
I use VS ver 10.0 and during working on a project there were no problems. I use different files (audio and video) and after rendering lost some mpg audio files. Video is still there but audio is muted. wma and one mpg files works fine.
Project properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 224 kbps
MPEG audio layer 2, 48 KHz, Stereo
wma file properties (works fine after rendering):
mpg files, different ones (works fine after rendering):
mpg files (do not work, muted):
Is it possible to save them (muted audio)?
View 7 Replies
View Related
Oct 15, 2010
I am using VS X3 and recently have a problem with it. At the time moive created there are couple clips in dark but they were ok when I edited them in the project status.
View 6 Replies
View Related
Jun 29, 2013
I recently had a senior moment, sigh. I ended up deleting my video 5 ultimate . I finally installed it back again, For some reason, x4 samplesvideoPo3 UVP files doesn't exist. Actually I had Studio prox5,prior to buying the ultimate program. I also have problems with my auto music, cant find those files. I didn't think that I had the files from pro X 5. still in my computer, Is it possible to reinstall the prox5 and the missing files will be back where they should be?
View 12 Replies
View Related
Oct 6, 2010
Recently upgraded to X3 despite reservations on the 'Burn' capabilities (see many threads in this forum). Having completed a project I now want to burn a DVD. The options available in X3 do not excite me - it seems that there is a forced exit from X2 into either DVD Factory Pro or DVD MovieFactory 7 SE. Played with these but then breached my low boredom threshold (is it worth persevering with either of them? Both look a bit Mickey-Mouse)
Decided to fire-up my trusty copy of X2 and do the burn in that.
On the first screen I noticed that the 'Next' button is partially obscured by the 'Setting and Options' button. But enough is visible to proceed to next screen. But problem arises on next screen where 'Next' button has now become 'Back' button and 'Next' button is no longer visible. Therefore I can only go backwards but not forwards (a metaphor for life?)
Have tried an uninstall and reinstall of X2 but problem remains exactly the same. Did not have this problem before I installed X3 (on same computer).
Questions:
1. Is there a keyboard shortcut that will take me to the next screen when in Burn mode?
2. Is it worth persevering with either of the burn options in X3 or are both inferior to the X2 burn?
View 3 Replies
View Related
Aug 13, 2012
In video studio pro x4: At step 3 "share" I can create a video file like an mpeg, and it will retain all "nudges" I perform on the audio waveform of the music tracks (to keep volume down during a narration moment) . But when I burn a disk.....the music file plays like it's never been adjusted (full volume) when playing disc.
View 4 Replies
View Related
Dec 11, 2011
I have been using Corel VideoStudio Pro X4 recently. I split a number of video files on a daily basis. This is what I do:
I take an Avi file that has a duration of about 30 minutes. I drag and drop the video into the "video track" area in the program.
Then I use the little "slider" thing and drag it to 15 minutes and click on the "scissors" symbol. which results in making the video split into 2 parts.
I delete the first part on the "video track" are and then I click on "share"-->"create video file"-->"custom"-->I choose Avi .
The compression I choose is Xvid Mpeg-4, 24 Bit RGB, and the Audio Format is Mpeg Layer 3, 8 Bits, 11.025 Hz Mono
The resulting video does not have any sound . This does not happen if I delete the 2nd part and create the video file with the first 15 minutes only. This happens with almost all of my videos (all of them are avi).
View 3 Replies
View Related
Aug 29, 2011
Capturing sd dv from a sony handycam using VS9 and a USB conection to pc. Few days ago all seemed to be ok was able to capture at 640x480 (I think) but now for some reason information section is showing 320x240 with a corresponding really poor quality preview. No matter what changes I try to make in the capture options or project properties etc it will not now allow me to capture at a higher quality. The options menus don't even show a higher quality available than 320x240. Tried at both AVI and Mpeg format capture settings but no change.
windows XP Home
ATI Radeon 1200 series
32 bit
1gig RAM
PAL region
View 1 Replies
View Related
Sep 7, 2011
I've got two different softwares x2 and x4. I've been working on x4 a lot recently but would like to do some titles in x2 (I've noticed titles are handled better in x2 :O).
Anyhow, tried to do smart package from x4 to x2, but x2 wouldn't open the project
View 2 Replies
View Related
Dec 1, 2011
I added a plugin (Mercalli image stabilizer) in VSX3. It didn't work right away so I re-installed it. Now I have it two times in the FX library. I have it only once in the Corel program folder ( in the vft_plug folder). I would like to delete the extra one in the FX library. Where can I find the related buildup folder?
View 2 Replies
View Related
Jan 29, 2012
i just bought V. studio pro X4, before i had Pro X2.
I built a big library with all my films in my x2 version, i took lot's of hour to build it so, I would like to import this library in my X4 pro.
i tried import/export library function but it didn't work.
X4 prompt me a message " missing or corrupt file" when i tried to import my X2 library.
View 3 Replies
View Related
Dec 9, 2011
I am having using CVS Pro 4 for a few months. Now my hard drive is about filled up. But I cannot find where the libray is in my hard drive. where is the directory the library is located so I can back up my video files.
View 2 Replies
View Related
Aug 11, 2012
If I buy vs pro x5, will I be able to export my present library from pro x4 and import it into pro x5's default library? Will buying the boxed or downloadable version of x5 make any difference in achieving this end? Which is to say, if I download the new x5 version will I lose my present library or will I be able to move it from the old to the new?
View 11 Replies
View Related
May 18, 2011
Bought full version of VS Pro x4. But, it will not import saved library files (photos,video and audio categorized) from Pro X2. I get window saying, "Files cannot be imported, maybe number of files is not correct or files are invalidated." Is there any way of getting my saved library files from Pro X2 into the new X4 library? Also got 3 FX volumes of New Blue "Video Essentials" in Pro X2. Is there a trick to importing them into X4? What to do?
View 2 Replies
View Related
Jan 23, 2011
I have completed a few projects and would like to add some more videos to edit a new one. Is there a way to organize the library so that there aren't eventually hundreds of clips in there?
View 1 Replies
View Related
Jun 13, 2012
How can I rename clips in the library. For example, after I split or multi split a clip, I have multiple files with the same name? I cannot click or rightclick, and then rename the files to keep them separate.
View 5 Replies
View Related
Jul 7, 2011
Unlike Video Studio Pro X2 and Pro X3, it seems that the VS Pro X4 library will not allow us to list our media under sub-headings... only under major categories or folders, using some 30 or so folders given us. But, why give us folders if we cannot put sub-headings inside them. True, perhaps I'm overlooking something... for up to now I've been very happy with VS Pro X4. But try as I have, I find this new library "organizer" to be impossible when attempting to catagorize my photos, video clips, AND... MUSIC, NARRATION AND SOUND EFFECTS, under a limited list of categories, with no sub-headings. The organizer in Pro X2 and X3 gave us all the sub-headings we needed to categorize our photos, clips, and especially our music, separating it under its various types and forms where we could easily find what we needed. And... it was so easy to use. So I'm confused... why did they replace it with this, which is practically useless???
View 3 Replies
View Related
Jul 31, 2012
Cant find a way to import about 400 jpeg images on a DVD(not protected) into the library of VSX5.I have tried various options from the DVD or a folder on the hard drive that also contains the images. I hope to get them showing on the project as a slideshow at the end. If and when I do import them into the project they will need to be resized in the overlay track by dragging to keep the aspect ratio. There are landscape and portrait pics.Can I group them together in ie landscape order and then apply attributes to all to avoid having to do this individually, if so how
View 7 Replies
View Related
