I am using autocad 2013 and I face a serious problem
when I was working in file sudden it hang and say automation error file is busy
after close file and reopen again I found nothing in file
and size of file become small
and backup file have nothing also
We are facing strange issue with all different versions of AutoCAD (2007, 2011, 2013). While users are working on the file, all of a sudden the contents (work done) are lost and it becomes all blank. The file size is same but when we open the file all the work done is not displayed, but just a blank screen.
It happens occasionally and there is some Automation Error in the command line below. The software is not hanging but the open file is in hang state and we have to close it. While closing whether we select yes/no the content (work done) is all lost. The temp location where the files are saved in one of the computer is become huge around 40GB will many Autocad autosave and temporary files; if it has anything to do with it !
I've attempted to plot the contents of a ctb file using any one of the 'export to csv' routines floating around the web however what i'd like to include (an never seem to manage) is an actual display of the colour represented by the pen (you will of course realise i am referring to a ctb file rather than stb).
View 9 Replies View RelatedWhile working on vspx2 it locked up. Rebooted and discovered that my main hard drive was not detected. My computer guy got it working again, but my hundreds of files (images, video clips, titles, audio clips) that I had stored in vspx2 library, so neatly organised, had disappeared. It became like it was when I first bought it. Everything was gone from the library, though they were still on hard drives. scattered everywhere.
View 5 Replies View RelatedHow can I import the contents of an image file into an already open file? I want to import the WHOLE image, not just a cropped version.
View 1 Replies View RelatedWhen customizing the screen menus, adding a few icons or pull down menus, when autocad is restarted, Autocad reverts back to the default menu. How can I set this up to retain any menu changes I make.
View 2 Replies View RelatedSee attached file.
The preview file shows the correct contents of this file but once opened it seems that the file contents is from an earlier saved version?
Is there any way to recover the file that is shown in the preview file dialog box?
I have encountered an error in 2013 MEP. Autocad will suddenly not load and it appears that it gets hung up looking for a profile that does not exist. "AutoCAD MEP (US Imperial)" If I am logged in as administrato,r it opens fine. In my own domain, however, it does not. I have repaired, uninstalled and reinstalled to no avail. Incidentally, all of the other Autodesk programs work. Any thoughts on where I can find that profile so that I can redirect to it?
View 1 Replies View RelatedTrying to create a dynamic block that will multiply the number of neutral and ground blocks as it's stretched.
My power terminal strips can contain 1 to unknown number of circuit breakers, and each circuit breaker requires a neutral and a ground block.
All the similar items in a stip are grouped together, all the circuit breakers, then the neutrals than the grounds.
So depending on how many circuit breakers I have I'll need the same number of neutrals and grounds, but grouped together.
In the attached block I added the stretch action to move the end cover and end stop of the strip down, but don't know how array/space/stretch the neutrals and grounds so they're grouped together.
The ciruict breakers aren't shown as they can be from different manufacturers and therefore different widths.
Tried attaching my block file but get this error message:
"The contents of the attachment doesn't match its file type."
my 3D geometry going missing after I have saved the drawing. Running AutoCAD 2013, Saving file Format 2010. I draw a room. I have walls, chairs, desks, a floor, etc. I save the drawing. When going to re-open the file I can see all of my geometry in the file preview, but when opening the DWG the floor is missing. All Layers are on and thawed. When running a purge command it indicates that something is on the layer, but I can't see it or select it. Changing visual styles also has no effect. I have used CAD in 3D since CAD 200.
View 9 Replies View Relatedhow to add macros to my ACAD 2014 to count blocks, I managed to lose the "copym" command while trying to figure how to create a button in the user interface found in the ribbon bar under the customization tab...when I type copym into the command line, it wants to prompt me to finish the command string using the command "copymode" and doesn't even see that the command "copym" even exists in the list that is created. (the list that's created by an autocomplete function)
I found the command in the list while making a pull down menu item selection button for "copym" utilizing the user interface in the ribbon. I drug the command info for "copym" to the menu bar using the user interface feature. The command is there, all the info seems to be correct, I even managed to make a menu selection for it in the pull down menu. But when I select that menu item, the command line says: UNKNOWN COMMAND "COPYM" Press f1 for help.
I think I accidentally deleted something, just wondering how I can get my "copym" command function back into AutoCAD from never-never land.
How do I reload a custom toolbar after uninstalling-reinstalling AutoCAD 2013?
View 2 Replies View RelatedInstead of a window popping up with the hatch settings, I just get the following in the command prompt:
Pick internal point or [Select objects/settings}:
what might be causing this?
While working in a drawing, I noticed that my leaders looked a little odd. They had ALL lost their verticies and upon further investigation I realized that the mtext is no longer attached to the leader (i.e. when you select text and grab the grip and move, the leader, text end, does not follow). Start a new leader command, and all is well with the new leader and text but the old leaders remain disconnected.
This is a new file originated in 2013. Audit was 0. Restarted AutoCad, checked a bak file and auto-save, no changes to mleader settings or attachments. I do no recall executing any out of the ordinary commands or changing settings.
I lost my Tool Palettes Design Group, I still have the same profile the only thing is showing is the menu bar, how to get it back
View 2 Replies View RelatedHaving problem with sheet views losing all their numbering??
Have been using sheet views since the day they came out. Great for cross referencing and not just call outs. But also lists of materials etc. as well. See attached image.
However recently when opening a drawing, boom the views lost all there numbers and restored the name back to what i originally called the view!
See below. The circled view numbers disappear!
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
i have lost a file and cannot find it anywhere on c drive. where can it be stored.?
View 1 Replies View RelatedI think this should be an easy thing to do, but I am having problems figuring it out. I need to repath the location of a point file being used in a surface. My surface will not rebuild because it can't find the point file originally used. Drawing was used on a different computer system, so the point file directory is now pointed to the wrong path.
View 7 Replies View RelatedWhen I migrated to 2012 form 2011, it only migrated a partial list of the support file search locations. So, I reset the ones that were missing and exported out my profile.
Next I saved my workspace to my name and checked the box to "automatically save workspace".
I shut my computer down for the night. When I restarted my computer, then AutoCAD 2012 the missing support paths are missing again. I am not the only one in the CAD department that is having this issue. It is so annoying to have to reset my profile every time I shut my computer down.
I defined alignments and a surface in Civil 3d, then reopened the same drawing in Autocad 2012 to amend some line work (just because I like drafting in this better). When I next needed to do an inquiry off the surface, I opened the drawing in C3D, but all the alignments and my surfaces were gone! Why doesn't C3D retain alignments/surfaces after you've opened a drawing in Autocad 2012? Would you recommend keeping a separate C3D base drawing for the design work, and another for the drafting? and just xref-ing between the two?
View 2 Replies View RelatedWhen I import a STEP file or most recently a Solidworks part the assigned colors are replaced by the standard gray. Is there an option I'm missing to ensure the colors are retained? I am using Inventor Professional 2012.
View 9 Replies View Relatedyou've zoomed in to start this painstaking freehand selection withlots and lots of points, and when you get to the end, nothing getsselected. Then you notice that, once again, you had done a Select Allsome time ago (invisible because you zoomed in) and forgotten to SelectNone before clicking the lasso.
What do people do to avoid this? (I know the obvious answer is "rememberto check what your selection is all the time", but that's seriouslyflow-disruptive.)
GIMP could blink the image or something when you add selectionpoints that don't increase/decrease the already selected area, but Iguess that might take some time to implement.
So, after many hours of work, and many saves, it seams I have lost a PSD file. After the program was responding very slowly, I decided to close and restart. While saving my file, there was a save error. I don't remeber exactly what it said, but it was something similiar to the filename was invalid. I thought nothing of it, since I had saved just prior, and closed the file without saving. When I go to reopen what I though would be the most recent saved file, it is missing. It's not there at all. There is nothing in the autosave folder either. I have yet to restart Photoshop, hoping there is something in the memory I can recover.
Adobe Photoshop Version: 13.0 (13.0 20120315.r.428 2012/03/15:21:00:00) x64
Operating System: Windows 7 64-bit
Version: 6.1 Service Pack 1
Something corrupted my installation of CS5 a month or so ago after it had been working correctly and I lost all the image file associations. Photoshop worked fine but only if I directly opened files from within. Also all the other image packages were missing from the file association list in the Windows 7 file associations tool, not just Photoshop. Using the Windows tool to find the programmes dot exe file and create an association also locked up at the select the right package phase.
I have fixed this now and my reason for posting is that several previously suggested fixes in both the MS Windows fora and elsewhere on these Adobe forums were either very complicated requiring direct registry editing or didn't work. It has taken me a while to find a work-around that worked, hence this post.
1) Firstly - as is stated elesewhere the obvious answer of simply reinstalling Photoshop over the existing copy doesn't work! Unfortunately it was a while before I found this out, with several time wasting retries of this as a fix attempt.
2) Not saying this is guaranteed to work in every case but I ran a 3rd party free Registry Cleaner tool, this appears to have fixed the bug in the registry allowing the Windows 7 File Associations tool to work properly again. Once that was fixed linking up each graphic type was simple.
Reason for posting is I wasted lots of time thinking the issue must have been a legacy from my earlier instal of a trial version of Master Suite or the older Photoshop 7 being replaced even though my CS5 edition had been working Ok for some time. because this is what is given as the usual cause. However I think in my case it was after loading and then deleting other graphics software, possibly Real Player, which had grabbed the associations and corruped registry settings somehow at uninstall. It appears registry cleaner restored the corruption and allowed the standard Win 7 tool to work again.
I was working on a picture; I had no other programs running and out of the hundreads of photos Ive edited, nothing like this has ever happened.
It was going to my best edit ever and the file size in GIMP was a little over 1.02GB which is fine. Right when I added some HVS Noise to a portion of the image the little green loading bar froze at the end but the effect sti'll worked. I go to move the layer down and everything just stopped.
I cannot re-make that image. I loaded the task manager and created a DMP in hope that I may be able to read it.
Is there anyway to get all that progress back? the DMP file is 290MB so I'm thinking that it saved everything but I could be wrong. I have not loaded GIMP since.
I open RAW pictures from my Canon 5D (but same happens with pictures from Canon 10D) in PS and than try to save them as JPGs, I loose majority of my metadata from the files (after right click on filename in. I can still Windows Explorer and clicking Properties or simply adding additional columns in Win XP Windows Explorer detailed view.So same picture, without any editing at all, just opened as RAW file (which it is a CR2 or CRW file in Canons), and then saved as JPG, suddenly does not show the date of picture taken, focal length or exposure time are all gone. Does not matter if I try Properties in Win Explorer or say Properties in MS Office Picture Manager.Was trying to look for any setting in PS that would set the ability to save or abandon saving of this type of information in JPG file but could not find anything of this kind.What is interesting I went back to my pictures I have saved from RAW to JPG using same PS years ago, and I this was not a problem. Everything was saving OK.So in summary:1. This would not be a problem related to camera (it is unlikely that same problem would occur on two different models at the same time - even though both are Canons)2. It must be a way to force the Photoshop to do that, I f I was able to do it successfully, almost without knowing, before.Therefore, I would think that either:1. There is some set of defaults somewhere in PS that I have accidently turned off causing my PS not to save this metadata properly or in full, or2. That it came as some kind of bug with some of the updates to PS CS3 that I was getting over last year from Adobe.
View 7 Replies View RelatedI mistakenly installed CorelDRAW and found out not what I hoped for, uninstalled, but now a bunch of Gimp file associations are gone!! like patterns and gradients and other things are no longer associated with Gimp! how do I get those file association back for Gimp?
View 1 Replies View RelatedIllustrator crashed in the middle of working on a file. Looked around for a recovered file on the desktop. Nothing. Can't seem to find any option to set my Preferences for auto-save.
View 1 Replies View RelatedThe external hard drive with wedding photos was corrupted. I still see the thumbnail in program(LR4) but it will not let me do anything with it. How/where do I use the memory of thumbnail to make a new file so that I can save my marriage?
View 1 Replies View RelatedI have been migrating dozens and dozens of .pat files from one version of AutoCAD to the next for many, many versions. Most recently in AutoCAD 2013 the .pat files were stored in the C:Program FilesAutodeskAutoCAD 2013SupportPatterns - worked fine. During the migration to 2014 I received an install error report stating that this subdirectory did not exist and could not be created. Alternately it stated that the new default path C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupport will be used instead.
At first I created the Patterns subdirectory where it could not be done automatically. No luck. Then I placed the Patterns subdirectory in C:UsersUsernameAppDataRoamiongAutodesk|AutoCAD 2014R19.1enuSupportPatterns and no luck.
While evaluating a few "Instant Effects", the orginal image file was overwritten with one of the altered images. The original image file, which I need, cannot be found.
I did not "Save" the altered image. Autosave is turned off.