I've attempted to plot the contents of a ctb file using any one of the 'export to csv' routines floating around the web however what i'd like to include (an never seem to manage) is an actual display of the colour represented by the pen (you will of course realise i am referring to a ctb file rather than stb).
View 9 RepliesI've been using CTB files to manage line colors, thicknesses etc - assigning a specific color number to a line color / thickness etc.
This results in great looking plots, but aren't the colors that appear on-screen.
I was wondering how can I make it look exactly like what you'll get but retain the automation/functionality of CTB files - rather than manually stuffing around with changing line weights/colors etc.
I am using autocad 2013 and I face a serious problem
when I was working in file sudden it hang and say automation error file is busy
after close file and reopen again I found nothing in file
and size of file become small
and backup file have nothing also
We are facing strange issue with all different versions of AutoCAD (2007, 2011, 2013). While users are working on the file, all of a sudden the contents (work done) are lost and it becomes all blank. The file size is same but when we open the file all the work done is not displayed, but just a blank screen.
It happens occasionally and there is some Automation Error in the command line below. The software is not hanging but the open file is in hang state and we have to close it. While closing whether we select yes/no the content (work done) is all lost. The temp location where the files are saved in one of the computer is become huge around 40GB will many Autocad autosave and temporary files; if it has anything to do with it !
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
I have a stationing line. I've used the block PTTICL to make ticks. The ticks display perfectly. I'll run through a plot preview and the ticks show on the plot preview. I push plot go to the printer and the ticks are not plotted.
I've checked the layer. They are on a layer that should print.
I've checked the block. The block is created on a layer that should print.
I've run through a number of options regarding the alignment label properties and found "display" to be equal to "true."
Everything else plots just fine. Only the station label ticks refuse to plot. My project is fairly short so the work around was to put a poly line right on top of the tick mark.
AutoCAD Civil 3D 2013.
Having an issue where the .ctb works in some paper space tabs and not in others. When we do the plot preview on one tab the line weight is correctly shown, and when we go to a different tab, the preview displays colors and no line weight. We tried this on two separate machines both running the same operating system, AutoCad 2013 and using the same .ctb.. We tried creating a new copy of the ctb. There must be a setting that is different in the viewports, but I can not figure out what it is.
View 6 Replies View RelatedI want to plot model and layput in a dwf file in AutoCAD 2013. So is it possible to plot model and layout in a dwf file?
View 3 Replies View RelatedI am trying to plot a drawing and am using a .ctb file that is not a color .ctb file. When I go to plot the plot wants to plot in color. Is there a setting in Options or somewhere that would be causing this?
View 3 Replies View Relatedexported all my user files and plot files and profile into new version of autocad 2013
now when i print a document instead of getting a monochrome plot setting it gives a greyscale affect even though using the monochrome plot file
obviously checked the plot file to see if its set correctley
this has occured on more computers around the office which is making me think it might not be the autocad
In PE11, can I display the photo bin contents and tool options at the same time?
View 1 Replies View RelatedI received a drawing today that doesn't allow me to choose existing ".ctb" files. Opening the "Plot style table (pen assignments)" from the Page Setup dialogue box. I can choose "Start from scratch" , use a "CFG" file, or "Use a PCP or PC2" file". I do not have any CFG files. I usually use PCP in my "Plot" dialogue box for the plotter pull-down menu.
How to use my plot style "BRhalf.ctb" when plotting this drawing. Also, a "heads-up" on background information on this drawing's plot style options, vs. the plot style options on many other drawings I have plotted.
I'm just started using inventor 2013 (from 2010) & the way colours/materials are applied has completely changed so I'm learning again from scratch.
Here's my issue: A customer has sent a casting to me in Parasolid format. When I open it, all the unmachined surface are blue & look a bit garish. However, the colours of the machined faces are ok & I wish to keep them.
So, I want to chage all the surfaces that are blue - I can use the picker & select all the blue faces seperately (by holding CTRL down & select each face one be one) but this is a pain & takes ages (there are over 200 faces)
I can see & edit the blue color in the manager but how do I tell Inventor to replace all - can it be done?
I'm using Autocad 2002LT and I have two different drawings to plot. I'm on Windows XP operating system with a TechJet 5536 Plotter (don't laugh it's the only one available.) One drawing is my own work and one is from a supplier they have emailed to me.
When producing a plot of my own drawing, I can easily plot monochrome, the plot style table (pen assignment) is set to monochrome.ctb.
When producing a plot of the suppliers drawing, it will only plot colour even though the plot style table (pen assignment) is set to monochrome.stb.
I can edit the monochrome.ctb colours if I wish to but I do not seem to be able to edit the colours of the monochrome.stb plot style.
How can I import the contents of an image file into an already open file? I want to import the WHOLE image, not just a cropped version.
View 1 Replies View RelatedSee attached file.
The preview file shows the correct contents of this file but once opened it seems that the file contents is from an earlier saved version?
Is there any way to recover the file that is shown in the preview file dialog box?
I've noticed with other people's drawings, that when i print them in Monochrome, the logo of the company stays in colour, i don't know how to do it.
View 9 Replies View Related2004 and how to turn "plot to file" off? Any time they go to plot the plot to file is already set and grayed out. It has been way too long since 2004 and I don't know where to have them look although I assume it is in Options somewhere.
View 2 Replies View RelatedI am plotting a file that has a pdf referenced into it. The quality of the plot is degraded only at the inserted pdf. The rest of the AutoCAD file looks fine. The inserted pdf is a printed AutoCAD file which looks clear and even has embedded layers and linework I can snap to (which seems to indicate that there is vector information present when it is in Autocad.
I have attached an image with 4 zoomed-in screen shots to show what I'm describing.
How to change the outline display colour when creating views on an Inventor drawing ? I've placed my base view and gone to create detail view - now I want to be able to change the outline marker colour from the default black.
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
how to find out using the .NET API if a plot device requires a file name when ploting?
E.g. choosing the plot to PDF device would require a file name.
How to turn plot and publish log file off? (see attached pic)
I found out how to turn the one off under plot stamp settings, but I would like this box to be unchecked also and I want to do it automatically for all my users.
[URL]....
Civil3D 2014 SP1
Win 7 Professional - 64-bit
HP Z400
Xeon W3550 @ 3.07Ghz
24GB of RAM
Nvidia GeForce GTX 760
Using someone elses template. When I plot to PDF the layout sheet name is not the PDF plot file name, it uses the drawing file name (and hence the same file name for all plots, not what I want). When I plot in paper space, my layout sheet name is the output file name, is there a way to change this?
View 6 Replies View RelatedTrying to create a dynamic block that will multiply the number of neutral and ground blocks as it's stretched.
My power terminal strips can contain 1 to unknown number of circuit breakers, and each circuit breaker requires a neutral and a ground block.
All the similar items in a stip are grouped together, all the circuit breakers, then the neutrals than the grounds.
So depending on how many circuit breakers I have I'll need the same number of neutrals and grounds, but grouped together.
In the attached block I added the stretch action to move the end cover and end stop of the strip down, but don't know how array/space/stretch the neutrals and grounds so they're grouped together.
The ciruict breakers aren't shown as they can be from different manufacturers and therefore different widths.
Tried attaching my block file but get this error message:
"The contents of the attachment doesn't match its file type."
Attached LISP will toggle the 'Display Plot Styles' for all layout tabs or the current layout tab. In 2010 it would not affect model space.
With 2012, AutoCAD added 'Display Plot Styles' as an option on the model space tab. This routine now affects that tab.
How to make it not change this setting for the model space tab?
Is there a way to get model space to "display plot styles" through a lisp routine or a script?
i'm currently setting up a whole bunch of custom tool palettes for the company I work for and instead of the icons displaying in their actual colour (at the moment they're green, which doesn't show up very well on the light grey background), I'd rather they show in the plotstyle assigned to the individual dwg's.
call up the page setup manager (while in model space) and click modify, you can then check the radio button to "display plot styles" in the top-right corner. But when you have around 100 - 200 blocks to change, that process can be rather time consuming and cumbersome!
I have one drawing per file at model tab. When I need to plot a multiple page file, I use:
Print > Batch Plot.
The problem is that I have to set plot configurations ( plot style table, plot area, paper size, etc) in each file before use Batch Plot.
Now I received 722 files with a wrong Plot Style Table. For this time I change the associated *.ctb file at Plot Style folder, but I will need to associate the right *.ctb to each drawing. It's also common to have to change other properties.
how do i change the text and entities from Black to Red after the WBlock has been inserted into a new drawing and exploded.
View 9 Replies View RelatedI am editing a drawing i have inherited from the previous drafter who is no longer working here. this drawing references 2 other drawings. one is the title block, the other is the engineering drawing. both of these drawings have white objects in them, namely, some text and some solid hatching.
Instead ot those white objects appearing as white in this drawing, they are appearing as a grey colour. i have double and triple checked that these objects are coloured by layer and the layer is white in both of the xrefs. they appear white in the xrefs but not in the final drawing.
since we are using colour dependent line weights in our printing, i would like to get this colour problem sorted.
I was wondering if there was an option to set Inventor to display the full file path for the current file open ? At present I am only seeing a short description of the name of the active file - I wish to see it's full file path similar to what AutoCAD displays.
Cad Manager/Senior Designer
Autodesk Inventor Professional 2013 SP2 64-Bit Edition
Windows 7 HP Z400, Intel Xeon W3550 3.07GHz
12.0GB RAM, ATI FirePro V4800 (FireGL)
I want to be able to plot a drawing as a PDF (to send to customers, vendors, etc.) and not have the PDF able to be converted back to a DWG (as so many programs out there are able to do).
View 3 Replies View Related