AutoCAD 2013 :: Plot Styles - Cannot Choose Existing CTB File In Drawing
Apr 29, 2013
I received a drawing today that doesn't allow me to choose existing ".ctb" files. Opening the "Plot style table (pen assignments)" from the Page Setup dialogue box. I can choose "Start from scratch" , use a "CFG" file, or "Use a PCP or PC2" file". I do not have any CFG files. I usually use PCP in my "Plot" dialogue box for the plotter pull-down menu.
How to use my plot style "BRhalf.ctb" when plotting this drawing. Also, a "heads-up" on background information on this drawing's plot style options, vs. the plot style options on many other drawings I have plotted.
View 4 Replies
ADVERTISEMENT
Jul 7, 2004
Is it possible to change a drawing using named plot styles (.stb) to colourdependent plot styles (.ctb) within the drawing itself? The variable'pstylemode' comes up as read-only.
View 6 Replies
View Related
Apr 15, 2013
Is there a way to apply plot styles and line weights to a dwg file like 'dwf ePlot' does but keeping the results in .dwg format?
View 4 Replies
View Related
Oct 30, 2013
I am trying to plot a drawing and am using a .ctb file that is not a color .ctb file. When I go to plot the plot wants to plot in color. Is there a setting in Options or somewhere that would be causing this?
View 3 Replies
View Related
Jun 23, 2013
How do the plot styles(pen assignments) differ for each drawing? On what basis these plot styles are created differently for each different drawings?expecting replies.
View 4 Replies
View Related
Oct 3, 2012
The first picture shows an old drawing using Autocad LT 2005 plotstyles named "cannon.ctb"*notice the weight of the dimension lines
The second picture is my new drawing using those same plot styles in our new Autocad LT 2013. Almost nothing is visible and it will not copy it is so light. The third picture is my new drawing and clicking on the box that says "Plot with Plot Styles" AND "Plot object lineweights". Note: I do not have my drawings set up with object lineweights.
I have tried completely redoing my plot styles, but that does not work. I am at a complete loss as to how to get my plot styles to register in this Autocad version 2013.
We have just upgraded our computers and now have windows 7, along with upgrading Autocad LT 2005 to Autocad LT 2013, and I have just installed a new Cannon plotter. However, I was having the same issue prior to the new plotter and I was hoping the plotter was the problem, which it seems to not be.
View 7 Replies
View Related
Sep 10, 2013
I've been using Autocad for over 20 years. Any office I've ever worked in never used custom plot styles.
Can custom plot styles control lineweights of objects at different scales? For example, I have a floor plan drawn for 1/4" plotting the lineweights look fine. Now I want to print that floor plan at 1/8" but many lines now look darker than before. Can I create a plotstyle for the 1/8" scale to control the lineweights?
View 9 Replies
View Related
Sep 15, 2011
We are attempting to move from using ctb plot files to stb plot files but we are stumbling out of the gate. How to convert an existing drawing over?
View 1 Replies
View Related
Jun 25, 2013
In AutoCAD 2014 and ASD2013 I cannot choose one of the printer, which is installed on Windows (OCE TDS600). It is strange, because Autocad sees it on the list of available plotters, but when I try to select it - it automaticly changes to "None".
The plotter is properly configured - I can print with it from Revit 2013 without any problems. Also when I switch account to any other (on that same computer) everything works fine.
I tried to add this plotter through "Add-A-Plotter Wizard", but each time I obtain an error massage "Autodesk Hardcopy component failed..."
[URL]
View 2 Replies
View Related
Sep 30, 2013
I have just switched over to 2014 and i cannot for the life of me get my batch plot to plot PDF's to a single file! Instead, it's printing all 37 layouts separate. I tried switching between multi-file & single file in the publish options, but nothing!
i know that it took me a while to perfect my settings the last time i set up a new version, but i am struggling to work it out now.
View 1 Replies
View Related
Feb 6, 2013
I'm wondering if there's a way to change/add to the list of available lineweights in the dropdown lists in the layer manager. I want to have a thickness of 0.125", but that isn't available. I found that if I issue the STYLESMANAGER command, I can edit lineweights in existing .ctb/.stb files, but I don't know now to transfer that to be available in an existing drawing. Can I just assign a ctb/stb style to my drawing?
View 4 Replies
View Related
Jan 17, 2012
So the firm I work at has AutoCAD 2000 and 2007. 2000 is installed on 5 out of the 7 computers, and 2007 installed on 6 of the 7 computers. 2 of the computers running just ACAD 2007 are Windows Vista, while all the other computers are Windows XP. We have an OCE TDS320 CAD Printer, an HP Wide Format Printer and a Panasonic 330 Copier/Fax/Printer. Our Problem is that When you try to plot an ACAD2007 drawing it will only plot it in color. This problem did not exist before 1/12/12.
When I select the Plot Style to print I select "monochrome.stb" which has always worked, now all of a sudden it doesnt. The only way i have found to fix this problem is to change my drawing to layer "0" which is white, so when it tries to print in color it will print black. Another Guy in the firm i work at has ACAD2007 on his computer running XP, he also has 2000 running on the same computer. When he tries to plot on ACAD2007 the same thing happens, so it is not isolated to my computer.
There is a difference though between his Plot Styles on his computer and the ones on mine. His end with .ctb, which works. It only doesnt work when he tries to print a drawing i made off of my computer. Because of this we copied his Plot Style folder for AutoCAD 2007 and installed it into the folder with all of my plot styles on my computer, replacing the ".stb" with ".ctb" That did not work at all. The last thing we tried was to copy over a file that plotted correctly, delete the drawing and draw what we needed, This also did not work. So basically we are thinking that ACAD2007 is not reading the Plot Styles correctly, or the Plot Styles are wrong or currupt.
View 1 Replies
View Related
Oct 24, 2013
I want to be able to plot a drawing as a PDF (to send to customers, vendors, etc.) and not have the PDF able to be converted back to a DWG (as so many programs out there are able to do).
View 3 Replies
View Related
Jul 18, 2012
We have some old drawings that use to have name dependent plot styles. We just need to plot them for reference and tried to convert them to the Monochrome ctb. But when you change it to Color dependent in the options nothing happens and if you type in pstylepolicy it tells me it is read only. When you plot it only gives you the option of the stb plot styles and will not change to ctb. The old stb styles are long gone and it wanted to print in color (lots of yellow back then).
View 1 Replies
View Related
Jul 15, 2012
How can you use a template file from your personal files to use it in an already existing .dwg file.
I knwo how to do it if I start the drawing from scratch and I select that template, but I want to put this existing drawing into my personal template file from my documents.
View 2 Replies
View Related
Jul 12, 2012
I have an exisitng drawing with 80+ layouts tabs that I would like to copy to a new template drawing.
I tried to use design center but to no avail.
How can I do this?
Running Windows 7 Pro
3.20 GHz
12GB Ram
AutoCad 2013 64bit
View 2 Replies
View Related
Jun 21, 2013
I need to twick my lisp routine (attached) to run it without asking.This lisp asks if I want to "Update" or/and "Import," while I have a source dwg. and I want to: (Update and Import).
so how to remove asking and just run the command? I need that routine to assing to a button in OpenDCL project (I think I know how to do that thogh),
View 4 Replies
View Related
Dec 10, 2013
I have used Microstation before and just used Autocad for 1 month.I am field surveyor and use Autocad for plotting stake out or other measurements. When I have to deliver a pdf drawning, there are 2 important things:
- It's have to be clear to see what I have done
- it's important to see the drawing I used to do job.
Making a new drawing with my measurements on it.To make it readable for the end user, I am using fading (transparency) on my referenced drawing. It is looking fine on the screen, but not on the plot.
On the plot all the colours are coming back to the original (before I change the transparency)I try to look on the plot style, but obviously it is not possible to change the settings for the referenced file, just for the all drawing.
What I am looking for is how to plot what I see on the screen (WYSIWYG)?I have looked for a solution on internet (can read english, danish & french) but I didn't find the solution yet!I would like to know how I can solve this problem?
I have to add, that I have several working sites with a lot of drawings, so I am looking for an easy/quick solution.
View 9 Replies
View Related
Apr 7, 2013
I import a csv file into my drawing and all the points and figures get drawn correct and on the correct layers.
But I end up getting some extra things also:
1. a little white circle comes in from the marker styles. it comes in on layer V-SURV-NTWK
2. i also get an extra white line that comes in on layer 0.
I have stopped these things from happening now by hitting the light bulb for the "basic" Marker Style and the "basic" Feature Line Styles. But i would really like to know what the Marker Style and Feature Line Styles are and what they are there for.
View 5 Replies
View Related
Mar 14, 2013
The following pictures are the same areas of a drawing zoomed in (cannot post proprietary DWG or PDF). In Layout mode I have the following
When I try to make a PDF of it (either by going File>Export>PDF or File>Print>Plot>select DWG to PDF.pc3) it produces the following
What is going on?
View 9 Replies
View Related
Jul 18, 2013
How can I load multiple dimension styles into an Inventor drawing file without loading them into a template file?
View 1 Replies
View Related
Oct 16, 2013
I am using the Autocad 2013 educational version. I have a drawing with a .ctb file. When i print, it is printing with the lines in colour. I would like the lines to print in black or grey. I assume I need to change the plotstyle to a monochrome.ctb plot style, but cannot work out how to change the plot style.
Is the plot style changed in the model or paper space of the drawing, or in the print menu?
- I have looked extensively under File/ print and can find nowhere to change a plot style.
- under File/ plot styles I can select from a list of .ctb files - but it only allows me to edit them - not apply them to the drawing.
- In the drawing under the properties inspector i can see a plot style menu and it is currently showing the option ' bycolour' when I click on the pull down options menu, there are no other options. There is also a 'plot table type; but it says this is ' not available'
-When i type plot styles in the drawing it brings up a bring s up an edit plotstyle table window, and this has a pull down menu that displays arrange of plot styles , but when I select one it only allows me to edit the plot style table and save and close. It does not actually apply it to the drawing.
View 4 Replies
View Related
May 26, 2011
How do I create a new CTB file OR insure that a drawing is supported by an existing CTB file? I have tried to start one from scratch using Plot window - when I click on file - it sends me back to MY DOCUMENTS. Is this a glich??
View 9 Replies
View Related
May 17, 2013
Having an issue where the .ctb works in some paper space tabs and not in others. When we do the plot preview on one tab the line weight is correctly shown, and when we go to a different tab, the preview displays colors and no line weight. We tried this on two separate machines both running the same operating system, AutoCad 2013 and using the same .ctb.. We tried creating a new copy of the ctb. There must be a setting that is different in the viewports, but I can not figure out what it is.
View 6 Replies
View Related
Nov 13, 2013
Isn't there a way of taking an existing hatch patter off a drawing file and load it into your hatch library?
View 2 Replies
View Related
Nov 8, 2013
I work with PDFs generated in AutoCAD.When opening these files in Illustrator, the default font is always set to Myriad Pro.
How can I substitute my desired font for Myriad when opening EXISTING files, short of copy/pasting into a new file? That workaround is just as time-consuming as resetting the font every time I work on a new document.Illustrator has to be referencing something when defaulting to this font. It seems unbelievable that this setting cannot be altered.
View 3 Replies
View Related
Oct 27, 2013
how to choose a frame to match existing photo size
View 1 Replies
View Related
Jul 12, 2010
I can't remember how to import a ctb file into my plot settings for a drawing?
View 9 Replies
View Related
Sep 14, 2012
I want to plot model and layput in a dwf file in AutoCAD 2013. So is it possible to plot model and layout in a dwf file?
View 3 Replies
View Related
May 26, 2011
Is there a way to plot multiple drawings in Acad 2009 without opening each drawing file?
View 1 Replies
View Related
Mar 8, 2013
my plot file names don't include the drawing name, only the layout name. it used to include the drawing name. i must have changed something but i don't what.
Dell Studio XPS 9100
Intel Core i7 CPU 930 @ 2.8GHz
12GB Ram
64 bit
C3D 2012 SP3.0
View 2 Replies
View Related
