While evaluating a few "Instant Effects", the orginal image file was overwritten with one of the altered images. The original image file, which I need, cannot be found.
I did not "Save" the altered image. Autosave is turned off.
I'm trying to create a script which will write the filename in/on an open image itself
I recorded a script which
draws a rectangle
merges it down
writes/types some words on the rectangle
and merges that down
Rather than type the same thing in each image, I'd like to write the file name instead omto the image
The applicable section of script seems to be:
Select all # Text
App.Do( Environment, 'TextEx', {
[A number of text tool parameters omitted]
},
[Code]....
The key line seems to be that: 'Characters': u'File Name Here?',
(the 'File Name Here' was, of course, what I typed in with the Text Tool
And I'm thinking I somehow have to use App.TargetDocument.Title, perhaps as a variable or system variable, but I have not been able to figure out how to do it.
I'm pretty good with WordPerfect's PerfectScript, and can sometimes muddle my way though some JaveScript, but this is beyond my ability
I will be processing thousands of files ovcer time, typically 100-500 at a time....
I have an image file 1779 x 2685 96 dpi that I want to take to Staples and get a 24" x 36" poster made out of it. How can I change the original image file using PaintShop Pro 5X so that the ppi meets the Staples requirement which is at least 180 ppi? and do I need to change the size of my image file to fit my specific poster size properly without losing any quality of the original computer image file?
View 3 Replies View RelatedFor some reason I've lost all of the keyboard shortcuts. When I pull down a menu item, for instance FILE, the "Save As" item no longer has "CTRL-A" next to it. These shortcuts are gone for everything in PSP. Is there any way to get them back without either adding them all by hand or re-installing?
View 2 Replies View RelatedI was using the warp brush tool (Paint Shop Pro X4) and for a stupid manipulation the tool bar where I had the value related with the brush tool slipped away. Now I 'm not able to recover it and I cannot change the dimension of the brush of the warp brush tool. I don't know what to do and I'm in trouble. I have tried all the tool bars but it doesn't appear anymore. How can I change the dimension of the warp brush tool without that?
View 2 Replies View Relatedpsp x4. how to get the tool bar back. i don't know why it disappeared but it did. anyway this is the toolbar that allows you to change the thickness of a line or the thickness of your paintbrush. i think it normally would be just below the printer icon.
View 5 Replies View RelatedIn the past week or two, I took time to re-create the tool button config in PSP14 that I've used for many years in Paint Shop Pro. However, the next day I see PSP14 has reset to the DEFAULT toolbars!!
Why did this happen? Was it failure to SAVE the configuration? Are my toolbars lost now? any way to restore besides button-by-button reconfig?
I went through a system restore yesterday. Im not sure how maybe somebody scheduled it without me knowing. Anyway I have tried and tried to reinstall Paint Shop Pro X5 but something pops up saying "Your system has not been modified. To complete istallation another time, please run setup again."
View 3 Replies View RelatedIs there any way to recover lost data after Paint Shop Pro X4 crashes?
There should at least be an option to save all open documents every x minutes. Where is this option?
I found where PSP saves the temp files and I recovered several of them. Is it possible to use these files to recover my data?
I'm working with a large PSD (100+ layers, over 170MB). I wan't to preview it as a PDF. I click Save As ... and I make a new file on the desktop. I minimize Photoshop, go to desktop and open the PDF. Ok everything's ok. I go back to photoshop (just maximize it). I work work work .... Ctrl+S every once in a while ... and I suddenly realize that the file I'm working on has changed its name from project2.psd to project2.pdf (I see this in the top bar of the window). I minimize photoshop, go to the folder where my psd file is stored and I check it for weight -> it's now 24MB instead of 170MB. Ok, Istead of going back in history I decide to Overwrite my original project2 (which is now a pdf as the windows explorere shows ... [oh yeah, and the pdf I've created on the desktop is still there as a totally separate file]) with the project I have currently opened in photoshop (I still have layers in the layers pallete and everything, it's just the photoshop shows the name of the file in the top bar "project2.pdf"). I do that. Now I close all the projects opened in photoshop (I guess that's the moment I really screwed up) - though I don't close the program itself if that matters at all - and I reopen my project2.psd.
it opens as a PSD ..... but it's flatten. No layers.
why after creating a new pdf file on the desktop the whole project I was still working with turned into a PDF file.
I wan't to get my 170MB 100+ layers file
Does Vista store some temp files anywhere? I suppose it won't be there.
I have a problem where LR4 on import seems to rewrite the xmp-files, and in that process data is lost, notably GPS-data, is lost.
My workflow:
Create xmp-file with Exiftool from CR2-files (sets copyright etc)
Geocode with Geosetter
Color labels with Photo Mechanic
Import to LR4
After import geo data is gone for around 30% of the files. It seems like files that have received a color label by PM is not affected, and many files without color label are correctly imported.I never loose any data before importing to LR4.
I use a Canon 7D, Exiftool and Geosetter are updated to latest versions, LR version is 4.3. I couldn't find how to attach files, but how the xmp looks before and after LR4 import, I could copy-paste the code in an answer.
I have a rectangular screen grab (Windows application) that I would like to simply round the corners and add a border. The image is not a photograph, but since I have Paint Shop Pro X3 and like how it works, I thought I would try it . I have spent some time trying to do this with Paint Shop Pro X3 with no luck. None of the pre-defined frames seemed to do what I need. I would also like to create a drop-shadow behind the image. how to do this or a video that I can watch. A list of steps would also be OK.
View 1 Replies View RelatedHow can I create a 2D gray scale image from a color image?
View 1 Replies View RelatedWhen I bring up n image file from a folder and after I work on it I would like to save in another folder other than from the original download file which is the only choice I seem to get.
Is there way to designate a "default" folder for saving other than having to continually search for the folder I wish to save to?
I noticed, that in X4 my file ( in which I'm working) is lost, if I open a new file from the organizer.
In older versions, I could have a lot of pictures on my screen and switch between them.
Is this a "bug" in X4, or is there a way to put this feature back like X2.
Hope the question is clear??
I have an image of a map and want to create a number of individual images of that map each with a large white dot with a black edge (to highlight different cities).
I have created a separate image of the dot using both transparent background and normal background and then attempted to use EDIT>COPY the image of the dot and then EDIT>PASTE to the image of the map but no matter which PASTE option I use I cannot achieve what I want to.
Also (different problem) I lost my MATERIAL PALETTE. I noted that to restore it I could use VIEW>PALETTES and select MATERIALS but it was already selected. I also used the F6 key without success. I had to start PSP by pressing the SHIFT key when I started it to restore PSP to its defaults and then I could select and display it. So what stopped me from displaying it in the first place?
A client sent me four images taken with his Canon camera - they are in Canon Raw (.CR2) file format. I can't get them to open and then save them as a .jpg or a .pspimage format in either PSP9 or in X3. In X3, when I click on the pic, it brings up the "Canon RAW Lab" dialogue box, showing a black and white image but with a deep pinkish cast to it. And there is no options to save it. What do I do from here?
View 7 Replies View RelatedI am using PaintShop Pro X5 & PaintShop Photo Pro X3
I have an image which was originally made up of two other images side by side. They are both of similar colours and content but the dividing line between them is quite obvious. I don't have the original PSP files in order to use the selection and layer method of feathering them, so what would be the best way to get the pixels to blend across the join? I thought there was a tool in PSP to do this but can't find anything.
I have learned how to remove a background and how to save the resulting image as a PNG.
View 3 Replies View RelatedI have 2 gif images. On image2 I have erased the background so as all you see is the checkerboerd.I want to place image2 (the visible part) on to image1.
I'm sure I have done all the correct procedures but the #2 image will show either a black or white background when pasted on to image 1.
These are the rules I followed. To make one image color transparent
1. Choose Image Palette Set Palette Transparency. If you are prompted to reduce the color depth and number of layers, click Yes to continue and then choose the options for decreasing color depth.
2. On the Set Palette Transparency dialog box, choose one of the following options:
• Set the transparency value to the current background color — makes the background color transparent
• Set the transparency value to a palette entry — specifies a color to be transparent. Click the color in the image, or click the color box to select from the current color picker. If you want to view the transparency, click Proof.
3. Click OK. The color is now transparent; however, it may still be displayed until you hide it.
I have 3 images which I am looking for the best treatment.
a) Dark hair: the woman has an dark hair which is almost blended with the background. What to do to bring more definition to hair and to “separate” it from background?
b) Face light: one side of the man face (and body) is with much brightness, blending with his white shirt yet. Is there any way do correct it?
c) Spot of light: in a slice of a landscape there is a spot with much clarity/brightness. I would prefer to bring more blue from the sky then light. On the other hand, maybe there is any way to take benefit of the light.
Why is it necessary to have an image open before using the "Paste as New Image" function.
I want to be able to copy an image from another program and paste in into PSP for editing. I can only do this if I first open a new or existing image in PSP before doing "Paste as a New Image".
I go-image-resize-resample-unncheck resize all layers-set new value via % (tried 400%)-lock aspect ratio in a jpeg image.but not much happens, I want to try and double the size, where am I going wrong?
View 14 Replies View RelatedI have been using PSP since it was free shareware so I'm rather familiar with it. I just installed the PSP X4 14.1.05 When I open an image in the "edit" area and have the move tool chosen the image goes to "Fit image to Window" and both "Fit window to image" and "Fit Image and Window to Screen" are grayed out. I have tried the preferences and all else I can think of but can't get the window to fit to the image as it always has so I can be viewing several images at a time and working with them. I did try reinstalling. This is a Vista machine.
View 3 Replies View RelatedAfter I resize an image with Paintshop X4 the image on the work area is so tiny, like 1" X 1" I'm talking a 2000 X 2000 pixel image. How do I prevent this?
View 14 Replies View Relatedwhen I choose View then Customize then lets say open the drop down menu for Image, the right-click say Resize I see the following...
Reset to Default
Copy button Image
Delete
---
Button Appearance
Image
Text <-- Greyed out!
Image and Text
---
Star Group
Why is IMAGE option greyed out? do I have to place images in special folder and in what size and format?
I'm having an issue with loading a photo into PSPx5. When I go to 'Open' and click on a thumbnail in a folder. Some/most times the thumbnail preview loads in a second or two. Then I can open the file. However every now and again I get a very long wait, 20-40 seconds, before the thumbnail loads. All files are approx 90 meg so it's not a file size issue. Just some thumbnails taking forever to load in the small preview window.
View 5 Replies View RelatedNew version of PSPPX3U. There are 2 problems which I find most upsetting.
1. I open an image, 256 x 128 in size and create a new image 768 x 128 in size.
I click on the 256 x 128 image to bring it into focus and Ctrl+A to select the whole image, and Ctrl+C to copy the whole image.
Then I bring the new image into focus, then Ctrl+E to place the copied image at the left side, the image covers the 128 area perfectly.
Once the image is placed I Ctrl+G to deselect the image, the image shrinks to leave a 3 pixel uncovered area on the bottom.
2. Let's say there are several images open and I want to close one of them, so I right click on the image name to open the tool menu.
Rather than giving the option to close that particular image, it gives the option to close all images.
But going up to File, I am now given the option to close that particular image.
Which is ars-backwards.
My system specs:
My PSPP3XU version : 13. 2. 1. 20
Just installed PSP X6 on windows 8 64 bit. When in file explorer, I click on pspimage file and it opens in X6 64 bit. I want it to open in 32 bit. I did the right click Open With/Choose default program trick to no avail. I also did the File/Preferences/File Format associations and selected PSP X6 32-bit but it still opens it in the 64 bit version.
Do I need to uninstall PSP and install it again minus the 64 bit version to get it to work? I don't use the 64 bit version much cause my plugins are 32 bit.
Why is it when I move the X4 files (brushes, picture tubes, etc) to another location and even enter that information in the program that the program moves everything BACK into My Documents folder when I restart the program the next time?
The My Documents folder is for MY DOCUMENTS, not brushes, picture tubes, scripts, maps, gradients and all this other crap.
Why I can't stop this program from inserting folders in My Documents and filling it up with crap. I don't want it there.
I have a picture, I select save and chose png No what what name i pick PSP tells me "The file name is not valid" If i chose to save as TIF it saves right away. If I copy a png file in the directory and click on the file, and then click on that file in the save as dialog, PSP asks me if i want to overwrite, if i say yes then it saves the file: From then on i can save without getting this error message.
View 14 Replies View Related