Paint Shop Pro :: Lost Wrap Brush Tool Bar?
Dec 28, 2013
I was using the warp brush tool (Paint Shop Pro X4) and for a stupid manipulation the tool bar where I had the value related with the brush tool slipped away. Now I 'm not able to recover it and I cannot change the dimension of the brush of the warp brush tool. I don't know what to do and I'm in trouble. I have tried all the tool bars but it doesn't appear anymore. How can I change the dimension of the warp brush tool without that?
View 2 Replies
ADVERTISEMENT
Oct 22, 2012
psp x4. how to get the tool bar back. i don't know why it disappeared but it did. anyway this is the toolbar that allows you to change the thickness of a line or the thickness of your paintbrush. i think it normally would be just below the printer icon.
View 5 Replies
View Related
Sep 22, 2012
Check the following
PSPx5.
Tools.
Smudge Brush.
Size 40. Doesn't matter what size.
Hardness 100. Doesn't matter hardness setting.
Step 1.
Density and Thickness 100.
Rotation 0.
Opacity.
Here's my problem. If I set it to 71 or below nothing happens. If I set it to 72 or higher I get a big smudge. I can't get an opaque smudge. 72 I get nothing and at 73 I get a lot of smudge. I can go with a higher setting ok but I can't get anything below 72.I can play with density but that' gives a different result. Not what I want.
View 5 Replies
View Related
Aug 18, 2011
How do I make text to wrap around a circle pattern?
View 5 Replies
View Related
Dec 6, 2011
In lieu of a licensed copy of Photoshop, I use Paint.NET for my general design brainfarts. I've used it for a few years now and only now have found something I dislike - a lack of word/text wrapping functionality.
So I decided I'd pop in and even remembered my account details on the first go (woohoo! This never happens) and drop a request for this functionality, as much as I hate requesting things in general due to a patholo--moving on. My vision is thus:
Step 1. Enable Word Wrapping (a button up here, assumedly). This would ideally have a dropdown also allowing you to change whether it wraps on whitespace only or mid-word with a hyphen. Step 2. Make a selection. If there is no selection, it wraps to the image border. Step 3. Type. When the text hits the right (or left, for right-aligned text, or exceeds the width of the selection/image for center-aligned) it will wrap at the appropriate point. When out of vertical space the text would merely be cut off as it is now. Bonus points: Make center-aligned text centered relative to the selection. Justified text would also be possible when there are given bounds, but who even uses that? Sheesh.
As it is now, text is based only on an anchor point (and is rasterized only - no editable text is a bearable downside for the gigabyte of memory I save from what I last saw of Photoshop, but that's not saying I don't often want for it), having text based on selection bounds if a selection exists would be a very user-friendly way of making it all much more powerful. I know Paint.NET isn't a word processor but nicer text handling would be a big plus for those of us who use it for more design-oriented purposes. As noted, text being editable objects (I don't much like the 'text layer' thing, but I can't honestly think of a better way) would be cool too.
View 2 Replies
View Related
Mar 27, 2013
For some reason I've lost all of the keyboard shortcuts. When I pull down a menu item, for instance FILE, the "Save As" item no longer has "CTRL-A" next to it. These shortcuts are gone for everything in PSP. Is there any way to get them back without either adding them all by hand or re-installing?
View 2 Replies
View Related
Feb 1, 2013
While evaluating a few "Instant Effects", the orginal image file was overwritten with one of the altered images. The original image file, which I need, cannot be found.
I did not "Save" the altered image. Autosave is turned off.
View 4 Replies
View Related
Oct 3, 2013
the size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
View 2 Replies
View Related
Sep 8, 2012
I am not very good with photoshop, and if there was a brush tool setting to make it just like an actual paint brush.
View 1 Replies
View Related
Sep 12, 2013
Every since I updated CDx6, Photo-Paint no longer allows for drawing or erasing in a straight line by clicking, pressing the alt key and clicking again. Instead a scale comes up that changes the brush opacity...What happened? I can't figure out what happened. See attached file. The red arrow indicates what comes up when alt is pressed.
View 5 Replies
View Related
May 25, 2012
In the past week or two, I took time to re-create the tool button config in PSP14 that I've used for many years in Paint Shop Pro. However, the next day I see PSP14 has reset to the DEFAULT toolbars!!
Why did this happen? Was it failure to SAVE the configuration? Are my toolbars lost now? any way to restore besides button-by-button reconfig?
View 1 Replies
View Related
Dec 21, 2012
I went through a system restore yesterday. Im not sure how maybe somebody scheduled it without me knowing. Anyway I have tried and tried to reinstall Paint Shop Pro X5 but something pops up saying "Your system has not been modified. To complete istallation another time, please run setup again."
View 3 Replies
View Related
Apr 9, 2011
My program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies
View Related
Nov 24, 2011
Is there any way to recover lost data after Paint Shop Pro X4 crashes?
There should at least be an option to save all open documents every x minutes. Where is this option?
I found where PSP saves the temp files and I recovered several of them. Is it possible to use these files to recover my data?
View 5 Replies
View Related
May 15, 2012
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
View 3 Replies
View Related
Jun 5, 2013
I have got a model wearing a shirt and pants that have the skin wrap modifier applied. all works fine animated in the viewport. When I render however the skin wrap gets lost, both in the render and then in the viewport.
View 1 Replies
View Related
Sep 10, 2011
I am getting strange banding when applying the X4 warp brush to a tiff file out of lightroom. Never seen anything like this in X2, X3 or adobe 16 bit brushes. pic below (win 7 pro, i7 950, X58 MB, GTX460)
View 2 Replies
View Related
Jul 26, 2011
I was reading a tutorial on Photoshop about using a gradient map on a brush (the case in point was of drawing fire, with four colours, black, red yallow and white, making up the gradient map) such that you'd paint just once to get all four colours from each brush stroke. Here is an example. I was wondering how to do that in PSP X3 Ultimate. I am not new to PSP but I never used the more complicated brush features. Scripting doesn't scare me too much, if it comes to that, but I'd prefer a manual approach.
View 2 Replies
View Related
Jul 17, 2012
PSPX4's change to target tool has never worked right for me. I have X2 which does work right. In PSPX4 no matter what the setting it applies way too much color. Even at 1% opacity it is like about 80% in PSPX2 with all settings the same.
Latest updates installed. PSPX4 still does not like Adobe LR4 JPEGs when resaving them, although I now get an error message instead of a save that loses the file for good as some 4-8k sized file that can't be opened. I still have to use X2 for those two reasons.
View 3 Replies
View Related
Sep 19, 2013
Can I use a brush to apply gautasian blur? I have paint shop pro x6.
View 6 Replies
View Related
Jun 1, 2011
PSPRo X.I have lost the ability to increase the size of the clone brush either by the presets or by the mouse and keyboard.It will not show by more than about one eighth of an inch square .
View 2 Replies
View Related
Dec 9, 2013
When using the oil brush, the color selector circle in the mixer palette is huge. Is there a way to make the selector circle smaller when using the oil brush The dropper at the center of the circle didn't show up in the screen grab.
View 4 Replies
View Related
Nov 10, 2013
How do I make a custom brush shape follow the contour of a path made with the Pen tool?
View 2 Replies
View Related
Jun 27, 2008
I try to use the brush tool I can not "paint" in the image.
I created a new image, selected the brush tool.
In the image a circle with a + in the center appears, but when drag the circle nothing appears.
View 2 Replies
View Related
Jan 12, 2011
When using the Brush tool in Photoshop, adjusting its opacity to (say) 50% en then painting the number "8"---so by crossing the curve with itself---how come the crossing does not add its opacity? If you would draw with a real brush on a real canvas, and come back to the same point in one single stroke, then that would be darker and darker. Why does Photoshop has another rule for this, should that work for a certain application? I find it rather not realistic, so I was wondering...
View 9 Replies
View Related
Jun 29, 2005
I, like most of us here undoubtedly, have become pretty familiar with the pen tool. From way back when we first start by placing anchor points then going back over them and adjusting them, to getting to the point where we can place them in the right spot, adjust them as we place them and keep moving.
Recently though, just to change things around so I don’t get bored, I've decided to try using the brush tool and my drawing tablet for masking purposes.
I was surprised to find that I really enjoyed it.
While they both give different results right off the bat, the end result is still the same. Something is masked out.
Mostly now, what I do is pen tool for everything except the hair. I just create a big path around the hair then come back and use the brush tool.
So...anyway. I'm just wondering if anyone has a preference or a good combination between the two?
Personally, I like both. I think they both have their strong points and weaknesses. The pen tool makes masked objects look obviously cropped, while the brush gives a bit more of a random edge. I mean you can still spot cropped images that were made with a brush, but its not as in your face. Of that is neither good or bad because if you need those sharp edges, your better off using the pen tool.
View 8 Replies
View Related
May 7, 2008
I made a new document on Adobe Photoshop today, and I picked a color, and used to paintbrush tool. It came out very translucent and I had to go over it about 5 times before it looked opaque...And I never changed any of the settings, I left it the same since I bought it. Does anyone know how I can fix this so I can draw on here without having to go over my lines a million times?
View 4 Replies
View Related
May 19, 2011
Is there a way to rotate the paintbrush tool? There's many times when I'm using a brush and it's at the wrong angle. Placing the brush on a separate layer and then rotating the layer is a huge hassle. Therefore, I was wondering if there was a way to rotate brushes.
View 2 Replies
View Related
Feb 9, 2011
I need to cover some details about the photo such as: date - location, etc.. - Until now I used the brush tool with a stroke to cover the details I have mentioned, but I can not run it with the mouse perfectly horizontal line. There is another way that I could use?
View 2 Replies
View Related
May 15, 2013
Is there a way to use the line tool to make a 1 pixel wide line? When I use a brush width of 1, the line apears to be blurred. I would like the line tool to draw a line as if it was drawn using the pencil tool (with brush width of 1). This means that every pixel I colour, will have the exact ARGB value that I am using at that moment.
Â
I have attached an example of this to this post. It consists of two lines, the top one has been drawn using the line tool, the bottom one using the pencil tool. I would like to turn the top line into the bottom one.
View 2 Replies
View Related
Dec 31, 2011
I create 16x16 pixel icons for use in my mapping software. I notice, when picking colours from the colour palette and dropping them into my grid using the brush tool, the initial colour is not its full intensity and that it is increased each time I click the mouse. This resulted in different hexadecimal values for each pixel square, which is unacceptable for my purposes. However, I discovered while writing this post, using the pencil tool drops the full colour intensity into the square. Now I am curious to understand why the two tools operate differently and how one knows, if using the brush tool, when full intensity is reached.
View 2 Replies
View Related