Paint Shop Pro :: Lost Extensive Custom Toolbar Setup - 14

May 25, 2012

In the past week or two, I took time to re-create the tool button config in PSP14 that I've used for many years in Paint Shop Pro. However, the next day I see PSP14 has reset to the DEFAULT toolbars!!

Why did this happen? Was it failure to SAVE the configuration? Are my toolbars lost now? any way to restore besides button-by-button reconfig?

View 1 Replies


Paint Shop Pro :: How To Setup New Customized Icon In Toolbar

Jan 14, 2013

Assume I have to increase oftentimes but not always the brightness of digital photos by a certain value (e.g. 20). The contrast should be 0.Ok, I could go now (in PSP X2) to menu

Adjust--->Brightness and Contrast---->Brightness/Contrast

then manually adjust the values and click OK.However these multiple steps is somehow unhandy. Even if I put the Brightess/contrast icon into the toolbar I still have always to adjust the actual values.

I want to perform this operation by ONE click.Is there a way to put a customized icon into toolbar which (when clicked) performs always the brightness/contrast operation with my pre-defined values regardless which values are set up currently in the "normal" brightness/Contrast dialog?

if yes: How can I do it (in PSP X2)?

View 1 Replies View Related

AutoCAD Architecture :: Lost Custom Toolbar?

May 9, 2012

How can i get my custom toolbar back ?

View 4 Replies View Related

AutoCAD 2013 :: Custom Toolbar Lost After Reinstall

Mar 25, 2013

How do I reload a custom toolbar after uninstalling-reinstalling AutoCAD 2013?

View 2 Replies View Related

Paint Shop Pro :: Add Plugin To Toolbar

Nov 25, 2013

I use a couple plugins fairly frequently in the Edit window and it's tiresome to have to navigate 4-levels deep into a menu each time I want to access them. Can a link/button to plugins be added to a toolbar? Is there another quick way to access plugins?

View 1 Replies View Related

Paint Shop Pro :: Missing Toolbar Icons?

Nov 18, 2011

I was messing around in PSP X4 and somehow managed to mess up my toolbars. Specifically, the STANDARD toolbar now has no images. I've uploaded a screen capture to show you what that looks like.

Screen capture showing the missing icons on the standard toolbar. noicons.PNG (9.52 KiB) Viewed 729 times

View 4 Replies View Related

Paint Shop Pro :: How To Have Info Toolbar In Edit Tab

Jun 11, 2013

I try to add a new toolbar to my "edit" menu on PainshopPro X5 but i cannot find it ? This toolbar is in the "photo gestion" tab, but i want to add it on my "edit photo" tab !

A picture is worth a thousand words:

This "info tab" on the upper right :

That I try to add to my "photo gestion" tab:

View 5 Replies View Related

Paint Shop Pro :: X5 Screen Capture Setup?

Apr 24, 2013

Version (the SP2 patch was installed). But I'm unable to figure out how to setup screen capture because that option is grayed out. I'm unable to complete Step 1 due to the latter issue. That is: File | Import | Screen Capture | Setup; I can never reach the fourth selection.

View 3 Replies View Related

Paint Shop Pro :: Toolbar To Access Object Align?

Feb 16, 2012

When dealing with vector, it is just to click in image with "pick tool" to appear a tool bar where object align/distribution is available.

But when dealing with raster, this tool isn't available. The only way I found is through "menu=> objects=>align". To raster images, is there similar vector tool bar to access direct object align/distribution?

View 3 Replies View Related

Paint Shop Pro :: Adding New Button Group To Tool Toolbar

Nov 29, 2012

Have only recently purchased and installed X5. I am coming from PSPv9 (and doing so reluctantly.)

I am attempting to duplicate the tool toolbar that I am use to in PSPv9 in X5. I have been successful except for one group. In PSPv9, the Dropper tool and the Color Replacer tool are in the same group. I have been able to create a new Button Group and place both tools into it. What I can not figure out is how to have the new button group display an icon. All other groups display the icon of the first tool in the group listing.

View 1 Replies View Related

Paint Shop Pro :: No Printer Button On Page Setup Dialog Box?

Mar 2, 2008

I recently got a new computer, with Windows Vista. I used my wife's existing CD to install Paint Shop Pro 7 (from 2001 - yikes!). It seems fine, except for a few of the preferences. The BIG problem is that the [Printer] button on the Page Setup dialog no longer appears! Here's the verbiage from the PaintShopPro7 user guide:

6To surround the image with a color, click the Background button. When the Color dialog box opens, choose the color. The area of the paper from the image edge to the paper margin will be covered with this color.

7Click the Printer button to open the printer.

8Click OK to close the dialog box and save the settings.

View 6 Replies View Related

Paint Shop Pro :: X5 Lost Keyboard Shortcuts?

Mar 27, 2013

For some reason I've lost all of the keyboard shortcuts. When I pull down a menu item, for instance FILE, the "Save As" item no longer has "CTRL-A" next to it. These shortcuts are gone for everything in PSP. Is there any way to get them back without either adding them all by hand or re-installing?

View 2 Replies View Related

Paint Shop Pro :: Image File Overwritten / Lost?

Feb 1, 2013

While evaluating a few "Instant Effects", the orginal image file was overwritten with one of the altered images. The original image file, which I need, cannot be found.

I did not "Save" the altered image. Autosave is turned off.

View 4 Replies View Related

Paint Shop Pro :: Lost Wrap Brush Tool Bar?

Dec 28, 2013

I was using the warp brush tool (Paint Shop Pro X4) and for a stupid manipulation the tool bar where I had the value related with the brush tool slipped away. Now I 'm not able to recover it and I cannot change the dimension of the brush of the warp brush tool. I don't know what to do and I'm in trouble. I have tried all the tool bars but it doesn't appear anymore. How can I change the dimension of the warp brush tool without that?

View 2 Replies View Related

Paint Shop Pro :: X4 - Lost Template / Get Tool Bar Back?

Oct 22, 2012

psp x4. how to get the tool bar back. i don't know why it disappeared but it did. anyway this is the toolbar that allows you to change the thickness of a line or the thickness of your paintbrush. i think it normally would be just below the printer icon.

View 5 Replies View Related

Paint Shop Pro :: Path To Language Folder Couldn't Be Resolved / Setup Cannot Continue

Dec 18, 2010

I am a licensed user of PaintShop Pro X3 with all current updates installed. Yesterday I purchased the ultimate bonus pack online ( Winzip,Painter Essentials, User Guide,KTP and Photolooks) from Corel.The photo looks plugin installed with no problem. The Corel KPT Collection (PSPPX3_KPT_01 set up file) would not install giving me the following error message"The path to the language folder could not be resolved, setup cannot continue".I use Win 7 64 bit

View 6 Replies View Related

Paint Shop Pro :: Lost Corel X5 During System Restore Now Cannot Reinstall It

Dec 21, 2012

I went through a system restore yesterday. Im not sure how maybe somebody scheduled it without me knowing. Anyway I have tried and tried to reinstall Paint Shop Pro X5 but something pops up saying "Your system has not been modified. To complete istallation another time, please run setup again."

View 3 Replies View Related

Paint Shop Pro :: Auto Save / Recover Lost Data After X4 Crashes

Nov 24, 2011

Is there any way to recover lost data after Paint Shop Pro X4 crashes?

There should at least be an option to save all open documents every x minutes. Where is this option?

I found where PSP saves the temp files and I recovered several of them. Is it possible to use these files to recover my data?

View 5 Replies View Related

Paint Shop Pro :: X6 Not Remembering Custom Workspace?

Dec 24, 2013

Re: PSPX6 32-bit

I got a message to install service pack 1 this morning. Since then every time I load PSP the workspace is the default workspace and all of the tools I had added to the toolbars are missing. If I load my custom workspace from the load menu, it makes no difference, it just refreshes the screen and nothing changes. Also every time I load the program it displays the Learning Center and Organizer tabs, even though I keep disabling them.

I tried resetting everything back to the defaults but it doesn't work. Should I do a new re-install or is there something I'm missing?

View 1 Replies View Related

AutoCAD 2010 :: Custom AutoPurge Tool In A Custom Toolbar

Nov 9, 2012

We are a firm using ACAD 2011 w/ a custom toolbar that has an Auto Purge "tool" it currently deletes duplicated layers, reg ops, duped scales etc. we are wondering what else it can do (or any other tools that may be of use) or how can we get it to do more for us, like restrict referencing files from "unwanted" locations and any other tools that are essential to reducing the size of a drawing so its now so slow

View 3 Replies View Related

Illustrator :: How To Save Custom Artboard Setup With Custom Document Profile

Nov 1, 2012

Is there a way to save a custom artboard setup with a custom document profile in illustrator cs5? I do technical illustrations and our page size is odd (7.19 x 8.96. It the size that our Framemaker layout is set to.). I have a custom document profile that I use, but I use the grids all the time so that my callouts are spaced out evenly around the art. I would like to have a way to set the artboard up so that the grid will align to the center of the artboard everytime I turn them on. Right now they always start from the top left and when I center art in the center of the page, the grid spacing isn't the same on each side of the art. I just want to be able to open my document profile, turn on my grids, have them start from the center, and I can get down to business. As it is now I have to go into my artboard settings and manually adjust the grid to the center. Small annoyance, but it still annoys me. I have tried to save it a few different ways, but nothing has worked. Maybe there just isn't a way.

View 4 Replies View Related

Paint Shop Pro :: Using Capture Screen / Setup And Capture Features Are Grayed Out

Mar 21, 2012

I wanted to use the capture screen feature but when I go to file-import-screen capture - the setup and capture features are grayed out and I can't get to set up. What can I do.

View 4 Replies View Related

Paint Shop Pro :: Creating Custom Edges / Frames?

Dec 28, 2011

Using X4 on Windows 7. I'm trying to create a series of custom edges to supplement those already supplied in X4. I've created the edge ok and exported it as a frame and it works ok. The problem is selecting it in the dropdown menu under Image/picture frames. Whereas the thumbnails of the supplied edges have grey shading to represent the transparent section of the edge, mine don't, they are just plain white and that makes it difficult to know what edge to select. What have I done wrong? I've opened a couple of the supplied edges and they look similar to mine ie no shading.

View 3 Replies View Related

Paint Shop Pro :: X3 - Red Eye Removal Custom Iris Color

May 1, 2012

I'm currently going through a batch of digital photos I took of my nephew, some of which have serious red eye issues.

using the inbuilt red eye removal tool under the adjust drop down has proven quite useful, but I am limited in terms of iris colors. none of the default colors seem to be a good match for his own eye color and they are noticeably inaccurate in the final result. is there any way to either mix the default iris colors then save the new color, or add extra colors any other way?

View 4 Replies View Related

Paint Shop Pro :: Selection Tool Custom Sizing?

Apr 23, 2012

I know you can custom size the selection tool by pixel position, but Is it possible to set the custom size of the selection tool to inches? For example I would like to have a custom size of 5 x 7 inches so I can place over an area and simple copy and then paste that 5 x 7 selection as a new image.

View 3 Replies View Related

Paint Shop Pro :: Custom Fonts Just Stopped Working All Together

Dec 13, 2012

Just today, while making graphics and such, my custom fonts just stopped working all together. Every single one that I have installed just shows up as nothing and is un-selectable when using it. The one in particular that i was using is Bebas Neue. Although all installed fonts are not working either.This happened out of the blue and I don't remember hitting anything or changing anything. Just typing with the font and it refused to show.

Steps Taken:
1. Reset All Preferences
2. Shift Key Trick on Load Up
3. Restarting the Computer
4. Reinstalling PSP X2
5. Using the font in other programs - Which they WORK (Word, GIMP, Adobe Illustrator, etc.)
6. Uninstalling/Reinstalling the Font itself.

View 2 Replies View Related

CorelDRAW X6 :: Setup Shortcut Keys To Open Toolbar?

Jul 4, 2013

I have modified one of the toolbars (Text toolbar) with many useful for me commands. Many of them are not visible when this toolbar is "docked" to Corel's interface, that's why I want to view it floating.

But because there is "Object Information" from Status Bar, and it is only one line (very wide indeed, and I cannot find a way to make it in two or more lines of text (?)) this toolbar became very wide and I want to hide and show it with a shortcut. It is annoying to right click on interface, to click on "Text" to open when I need it, and to go to "x" to close it all the time.

Now I am looking to find a way to assign a shortcut to open and close it. Is this possible in CorelDRAW X6?

View 4 Replies View Related

Paint Shop Pro :: Make Custom Brush Shape Follow Contour Of Path?

Nov 10, 2013

How do I make a custom brush shape follow the contour of a path made with the Pen tool?

View 2 Replies View Related

GIMP :: Why Doesn't Remember Windows Toolbar Dock Setup At The Start

Nov 12, 2013

why doesn't gimp remember windows toolbar dock setup at the start on the left hand side and the right side?

View 2 Replies View Related

Photoshop :: Lost The Top Toolbar With All The Feathering Etc Details In It

Jan 8, 2006

Ive lost the top toolbar with all the feathering etc details in it. I cant find it in the window toolbar area, how can i turn it back on?

View 2 Replies View Related

InDesign :: Lost Toolbar After Installing Mavericks OS X

Feb 4, 2014

Just installed Marvericks OS X and now in InDesign I have lost my toolbar. It is not in the listed in the Windows pull down menu either.

View 3 Replies View Related

Copyrights 2005-15, All rights reserved