Paint Shop Pro :: X3 - Red Eye Removal Custom Iris Color
May 1, 2012
I'm currently going through a batch of digital photos I took of my nephew, some of which have serious red eye issues.
using the inbuilt red eye removal tool under the adjust drop down has proven quite useful, but I am limited in terms of iris colors. none of the default colors seem to be a good match for his own eye color and they are noticeably inaccurate in the final result. is there any way to either mix the default iris colors then save the new color, or add extra colors any other way?
View 4 Replies
ADVERTISEMENT
Jun 24, 2012
I have been experimenting with removing backgrounds. I can see it is easy to work with solid block objects like buildings and vehicles and stuff like that.
I want to use it with people when their hair is wind swept. So far it isn't working within the flying hair very well and if there is a small spot that needs the background to come through it doesn't work well and also takes out the main foreground as well.
View 5 Replies
View Related
Dec 16, 2011
I actually do like using the software and I do like the updates and where it is heading.
I ran into a small problem last night when using the Digital Noise Removal plugin. I was playing with settings and unlinked the Noise Correction sliders and moved them about. Then I tried linking them back and clicked on the Large slider to make further adjustments when a blank alert dialog popped up. I can click the blank button and it disappears and seems to continue work, although the settings barely move. Each time I adjust the Large slider after this I get the same dialog.
View 14 Replies
View Related
Jan 8, 2013
A question for the PSPx5 experts. Under Adjust/Digital Noise Removal there is a check box for 'Camera Preset'. I like to use this and have set up a preset for my Nikon D7000. The problem is that if I'm not quick to click the check box, PSPx5 starts to run the noise removal. (It seems as though once started there is no going back. If I start again I get an 'over processed' image). Is there a way of opening Digital Noise Removal with the 'Camera Preset' as the default? Or is the 'Last Used' option using the 'Camera Preset' that I last used? Ideally I would like the 'Camera Preset' box checked all the time.
View 1 Replies
View Related
Nov 23, 2012
Using PaintShop Pro on Windows 7: I am trying to restore an old photo that I scanned as a TIF. When I open the file, I can use the Scratch Remover tool without any difficulty. Once I switch to Object Remover though, I cannot go back to the Scratch Remover -- the Object selection stays active and even though I can drag the scratch tool, it won't do anything. How can I kill the Object Remover?
View 3 Replies
View Related
Dec 24, 2013
Re: PSPX6 16.1.0.48 32-bit
I got a message to install service pack 1 this morning. Since then every time I load PSP the workspace is the default workspace and all of the tools I had added to the toolbars are missing. If I load my custom workspace from the load menu, it makes no difference, it just refreshes the screen and nothing changes. Also every time I load the program it displays the Learning Center and Organizer tabs, even though I keep disabling them.
I tried resetting everything back to the defaults but it doesn't work. Should I do a new re-install or is there something I'm missing?
View 1 Replies
View Related
Dec 28, 2011
Using X4 on Windows 7. I'm trying to create a series of custom edges to supplement those already supplied in X4. I've created the edge ok and exported it as a frame and it works ok. The problem is selecting it in the dropdown menu under Image/picture frames. Whereas the thumbnails of the supplied edges have grey shading to represent the transparent section of the edge, mine don't, they are just plain white and that makes it difficult to know what edge to select. What have I done wrong? I've opened a couple of the supplied edges and they look similar to mine ie no shading.
View 3 Replies
View Related
Apr 23, 2012
I know you can custom size the selection tool by pixel position, but Is it possible to set the custom size of the selection tool to inches? For example I would like to have a custom size of 5 x 7 inches so I can place over an area and simple copy and then paste that 5 x 7 selection as a new image.
View 3 Replies
View Related
Dec 13, 2012
Just today, while making graphics and such, my custom fonts just stopped working all together. Every single one that I have installed just shows up as nothing and is un-selectable when using it. The one in particular that i was using is Bebas Neue. Although all installed fonts are not working either.This happened out of the blue and I don't remember hitting anything or changing anything. Just typing with the font and it refused to show.
Steps Taken:
1. Reset All Preferences
2. Shift Key Trick on Load Up
3. Restarting the Computer
4. Reinstalling PSP X2
5. Using the font in other programs - Which they WORK (Word, GIMP, Adobe Illustrator, etc.)
6. Uninstalling/Reinstalling the Font itself.
View 2 Replies
View Related
May 25, 2012
In the past week or two, I took time to re-create the tool button config in PSP14 that I've used for many years in Paint Shop Pro. However, the next day I see PSP14 has reset to the DEFAULT toolbars!!
Why did this happen? Was it failure to SAVE the configuration? Are my toolbars lost now? any way to restore besides button-by-button reconfig?
View 1 Replies
View Related
Nov 21, 2011
I'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
View 6 Replies
View Related
Oct 18, 2012
For family history purposes, wish to improve the legibility of some hand written 1930 telegrams; the ink has faded with time so I want to change its colour to black. The form printing has not faded.
The user guide draws attention to the fact that the color selected for replacement must be in the image. Using the Dropper tool with sample size 1 pixel I position the dropper where I want it, see the color in the preview window, then right-click and the selected color appears in the background window on the Materials panel. So far, so good. I then place the Dropper tool over black in the swatch on the Materials panel, click and black appears in the Foreground window of the Materials panel. I think I'm set.
When I select the Color Replacer tool the background window immediately reverts to another color, usually white.Incidentally, the user guide suggests you read up on selecting colors with the Dropper; when you do this you learn that its OK to pick colors from the Materials panel.
View 6 Replies
View Related
Jul 29, 2011
Question #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?
View 11 Replies
View Related
May 15, 2012
I want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
View 3 Replies
View Related
Nov 10, 2013
How do I make a custom brush shape follow the contour of a path made with the Pen tool?
View 2 Replies
View Related
Aug 19, 2012
I have PSP X4 SP2.
Current color working space: AdobeRGB1998.icc.
I want to take HDR photo. I have 3 pictures JPG in AdobeRGB1998. When I giving HDR/MERGE EXPOSURE program automatically changing color profile of my pictures from AdobeRGB for sRGB. Why does it happen?
View 2 Replies
View Related
Jan 25, 2012
Just updated from X3 to X4. Spent an hour looking for the workspace color so I could get rid of the huge graphite box. Updated to SP1, found this forum, saw how to change the color in the files menu, and was very disappointed that the menu backgrounds changed, but not the BIG GRAPHITE BOX IN THE MIDDLE OF THE SCREEN!!
X3 gave us control of the colors. X4 is a big disappointment.what about the big graphite elephant in the room, the workspace?
View 2 Replies
View Related
Sep 15, 2011
When I try to print, the print placement dialogue box shows the image in greyscale, and when I click the options tab, the options to print color and CMYK separations are greyed out. Going ahead to print gives me a B&W print. The same file prints perfectly in color in PSP X3. What setting I need to tweak?
View 2 Replies
View Related
May 17, 2012
the image is attached.I would like to make the pin "blue", without loosing "real" appearance.
View 6 Replies
View Related
Dec 24, 2013
I understand many of the aspects of color management: gamut, color space, profiles, calibration, and most of the accompanying pieces. The problem is that I don't understand the inter-relationships of the various steps between taking a photo and printing it.
My equipment is not wonderful. If I were serious, I would have spent 10x what I did; but I'm not a pro. I'll settle for the best I can squeeze out of it. My goal, at this point, is to get my prints to look like what's on the screen.
For software I am using PSP X6 and Windows 8.1.
The photos I get come from various sources. As I understand it, those images (primarily JPEG if they come from a camera, presumably RAW if I scan directly into PSP) should have the profile of the capturing device embedded in them. Is that correct?
In the past I've been told that I should always use the color management in my editing application, rather than whatever Windows makes available. Is that still true? So far as I can tell, there is no way to turn off Windows Color Management (WCS).
You can turn off color management in PSP. There is a checkbox for it.I've been reading that I should set my PSP color working space to sRGB. Is that turned on and off by the color management checkbox? Assuming I have a profile for my capture device (camera or scanner), should I use that profile instead?
I have factory supplied profiles for both my monitor and my printer. Supposedly the printer will automatically select one of its various profiles based upon the paper I use, but that's a setting in WCS. (I can force a particular profile if I want.) In PSP's color management, I have to pick the profile manually.
Should I turn off color management in PSP, and set everything up in WCS? WCS has a setting for viewing conditions. The default is "WCS profile for sRGB viewing conditions", the alternative is "WCS profile for ICC viewing conditions". Does that mean that I could (or should) get an ICC profile based upon my work area's lighting, etc.
View 10 Replies
View Related
Sep 9, 2011
In the X3 version there was a menue setting for the color of the work space where you could change it and not have to use the Graphite color. In the X4 version there is nowhere to select non default color. There should be as not everyone wants to be forced into having it the default"graphite or whatever"color.
View 10 Replies
View Related
Jul 3, 2011
I no longer have my Paint Shop manual and I don't know what "this" is called to search here or in my help section of my software.
I have Paint Shop Pro Photo X2, version 12.00
I want to change a pic I have of Jimi Hendrix like the one below so I can sketch it onto a canvas. I have played around with Photo shop.
73164_145358045511754_102317626482463_234732_3842573_n.jpg (20.36 KiB) Viewed 586 times
View 3 Replies
View Related
Sep 1, 2012
Coming from Pspx2 into Pspx4 this week. Applied a text title to a border on an image yesterday. Accustomed to having just a background colour for plain text. Went to click off the foreground colour and could not find a choice for NO COLOUR in the foreground Also No text box.....what happened to the text box?
What is the procedure for plain text with a single colour now in Pspx4
View 4 Replies
View Related
May 8, 2013
I am having a rather strange problem with PSP X14. I will describe my general workflow and where the problem occurs.
I do some editing to my photo and save it as a full size image. Next I resize it to a much smaller version for use online. I have no problems at all with these two steps. Next, I cancel the resized dimensions and resize it again to a file closer to the original size, after I sometimes sharpen it and add a canvas. Many of the thumbnails for this last step have horizontal color bars across the bottom of the thumbnail, ranging roughly from 1/16 to 1/3 of the image size. When I hit on it and open the file, the bar is not there. I tried opening this thumbnail in another photo editing program and when I have access to the thumbnails for opening, that bar is there on select images, and when I open the file, it's gone. Unfortunately I haven't had the opportunity to try printing it yet.
I've been following this basic formula for preparing and editing photos for a very long time and haven't had this problem until recently. And it's random, as not all images have this problem. I tried changing this process and reopening the full size file that has been edited and resize that one, but am getting the same random results. I have no problems with the thumbnails for the full size and the first reduced size images.
I have been a long time user of PSP...since v.7 and upgrade versions regularly. I'm running Windows 7 premium, 64-bit on a laptop with an Intel i-7 processor.
View 4 Replies
View Related
Jun 9, 2013
In my PaintShop Pro X4 there is a plugin called "Color Efex 3.0 Pro Complete" by Nik Software. Can I get that plugged into my PaintShop Pro X5? How?
View 2 Replies
View Related
Dec 8, 2011
I downloaded the trial of PSPx4 and sadly enough the trial does not include Nik's Color Efex Pro 3 (CEP3). What I would like to see, is if the CEP3 window actually fills the screen, or if it is smaller and the user unable to "maximize" it.
View 4 Replies
View Related
Feb 1, 2012
I'm testing the trial of X4, and it opens in an unpleasant window which has a dark gray background - is it possible to change the color of this background?
View 13 Replies
View Related
Jan 25, 2012
I downloaded a trial version of PSP X4. When i export an image from ASP in ProPhoto RGB color profile, PSP insist to convert it to sRGB. I wonder what is the color profile that been used by PSP as the working space?
View 9 Replies
View Related
Apr 8, 2013
Any way to simply remove a color by replacing it with a transparency? More specifically, the background of my image is solid black but the object itself is a little too intricate to cut out via the selection tool.
View 1 Replies
View Related
Aug 23, 2013
I tried moving Nik Color Efex 3.0 out of PSPx5 Plug Ins folder into PSPx6 Plug Ins folder, but that didn't work. Tried plugging in via Preferences...File Locations...Plugins... but that didn't work either.
I installed 64 & 32 bit version per the installation instructions. Is there anyway I can install Nik Color Efex that came with x5 into x6?
View 7 Replies
View Related
Aug 1, 2011
I have a problem with the display of images that come out too blue. The thumbnail looks correct but the large preview image has too much blue. I have processed the same raw images in other software with no issues but this seems to be an issue with Paint Shop Pro. Is there a setting that needs to be changed?
Once I open the image the image in the raw converter it shows the color balance "As Shot" as a different value that what the Adobe software reads. Not sure why. You can try and adjust the blueness out of the image but why do I need to do this all the time when I don't have to in other programs.
If I open any image in the full editor the thumbnail takes on this too blue look as well, even if no color adjustments were made.
I have attached 2 screen shots that show the problem.
View 7 Replies
View Related
