Using PaintShop Pro on Windows 7: I am trying to restore an old photo that I scanned as a TIF. When I open the file, I can use the Scratch Remover tool without any difficulty. Once I switch to Object Remover though, I cannot go back to the Scratch Remover -- the Object selection stays active and even though I can drag the scratch tool, it won't do anything. How can I kill the Object Remover?
View 3 RepliesI have been experimenting with removing backgrounds. I can see it is easy to work with solid block objects like buildings and vehicles and stuff like that.
I want to use it with people when their hair is wind swept. So far it isn't working within the flying hair very well and if there is a small spot that needs the background to come through it doesn't work well and also takes out the main foreground as well.
I actually do like using the software and I do like the updates and where it is heading.
I ran into a small problem last night when using the Digital Noise Removal plugin. I was playing with settings and unlinked the Noise Correction sliders and moved them about. Then I tried linking them back and clicked on the Large slider to make further adjustments when a blank alert dialog popped up. I can click the blank button and it disappears and seems to continue work, although the settings barely move. Each time I adjust the Large slider after this I get the same dialog.
A question for the PSPx5 experts. Under Adjust/Digital Noise Removal there is a check box for 'Camera Preset'. I like to use this and have set up a preset for my Nikon D7000. The problem is that if I'm not quick to click the check box, PSPx5 starts to run the noise removal. (It seems as though once started there is no going back. If I start again I get an 'over processed' image). Is there a way of opening Digital Noise Removal with the 'Camera Preset' as the default? Or is the 'Last Used' option using the 'Camera Preset' that I last used? Ideally I would like the 'Camera Preset' box checked all the time.
View 1 Replies View RelatedI'm currently going through a batch of digital photos I took of my nephew, some of which have serious red eye issues.
using the inbuilt red eye removal tool under the adjust drop down has proven quite useful, but I am limited in terms of iris colors. none of the default colors seem to be a good match for his own eye color and they are noticeably inaccurate in the final result. is there any way to either mix the default iris colors then save the new color, or add extra colors any other way?
I'm unable to point CS6 to the alternate scratch drive despite changes in permissions. I noticed my boot drive (C:) is actually Disk 1, not Disk 0, and my scratch disk (internal) is Disk 0. I can select an external drive (I:) with no issues, but that is a 2TB drive I use for data. So, I'm curious whether the mix-up with the boot disk order has anything to do with CS6 not being able to access the disk I want to designate as the scratch disk?
View 3 Replies View RelatedAll i want to do is create a dvd cover.
(A) Put in dimentions of dvd cover. FILE>NEW..etc It asks me then; RESOLUTION PIXAL/CM ( what does this mean???? obviously i want the best output possible..but i have a range of photos taken from various cameras for my dvd cover to include...i dont know what resolution they are all sitting at? What do i do? Max it out...to the highest..or the lowest?
And what the..is the choice of RASTER/ VECTOR background?? I just want a plain background to then place into a range of different sized photos.
(B) I can cut out a photo etc...but how do i place some photos onto the blank dvd cover? Everytime i click on an image..it covers the previous? and i cant seem to resize to whittle it down..to work with it...can find my original dvd cover? Is this layer? If so...do i put the blank dvd cover on layer 0?? or layer 1? Then what? I bring in a photo onto ...layer 0 or 1?
(C) Finally, Rulers...despite opting for dimensions in cm or indeed millimeter for my dvd cover...i just want to mark out exactly the front and back and side of it. How do I drag / get a rular to mark this out.
Scanning old slides often shows large scratches and specks. How can they be removed?I use Photoshop CS6, does it contain tools for that?Or are there plugins?
What I'm looking for is a Scratch Removal tool like I find in Silverfast 8SE (have one bundled with my Canoscan 9000F scanner) called SDR (I don't mean the iSDR which used the sanner's ínfrared).It automaticllay searches out scratches, marks them in red, lets you adjust how strongly it hunts for them, sizes etc.Then when you like it, click to remove them.
Two problems: it only works in conjunction with scanning, can't open an existing file.And it only handles 8bit color depth.I suppose full versions of Silverfast won't have these limitations, but that would mean quite an expense.Since I have invested in Ps CS6 I'd want to keep to that.
I am using Paint Shop Pro X4, with Italian language.
When the mouse pointer is hover the Accuracy selector (in Object Extractor section) PSP crashes.
This happens only if the language is set to Italian, no problem if the language is English.
I think there's problems with some tooltips.
On MouseHover PSP Crashes (Italian language)
Crash.png (7.2 KiB) Viewed 587 times
I watched a video, but next to the Lasso icon on the tool bar I don't see a square Selection Mode icon. Also, I don't see a green Apply button.
I was able to remove the object using the Carver tool. However, I had to reduce theTif file to 8 bits. I'm not sure what the difference is. (The photo is for publication in a magazine.)
BTW, when I go to the Corel help page, the top of the page is cut off so I can't get to the search box.
I would like to clone one object from one picture to another. When I have 2 pictures side by side and I want to clone one object to the other pictures the percentages are not the same with each other and the object is out og proportion. How do I get both pictures with the same percentages? As an example maybe there's a fire hydrant and I would like to clone it to the other picture and have it look as a 1 to 1 ratio.
View 2 Replies View RelatedThis is something that I could do very easy with PS, just CTRL + click in the layer and the object get a selection around it. How I can create a selection for an "floating" object? Sometimes I need to remove some pixels around the object I cant find a way to select the contour of the object again.
View 4 Replies View RelatedWhen dealing with vector, it is just to click in image with "pick tool" to appear a tool bar where object align/distribution is available.
But when dealing with raster, this tool isn't available. The only way I found is through "menu=> objects=>align". To raster images, is there similar vector tool bar to access direct object align/distribution?
What is made in an exact moment (2:50) of the tutorial bellow, in which "history" pallet is used together selection to extract object. It seems to bring a better result than using "object extractor" tool.
So, my question is related to handling the "history" pallet as showed in 2:50 tutorial. It seems the "undo" is applied to the first "selection" action, but I couldn't make as in the tutorial. My PSP version is X4 and the tutorial version is X2. I don't know if something has changed and I am unable to make it in PSPX4.
[URL] ...
It is possible extract foreground from image if I have: 1) exact image of foreground and 2) exact image - foreground + object on it ---> so that I can get object which has fine--aliased borders?
I want exact object - so I do not want use Background Eraser, it is possible somehow mathematically?
I need to remove a background from an object which I have imported into Photo Paint and by using the Wand have removed the white background. But when I go to export it and save it as a png file it puts the white background back in with the saved file. I need the object to have a transparent background so that I can place it overtop other objects and not see the white of the background.
View 3 Replies View RelatedI need to remove a background from an object which I have imported into Photo Paint and by using the Wand have removed the white background. But when I go to export it and save it as a png file it puts the white background back in with the saved file.
I need the object to have a transparent background so that I can place it over top other objects and not see the white of the background.
I'm running Architecture 2013. When creating an elevation object from a 3D model, the hidden lines are not being removed. I've never seen this before, though I have been using Architecture and ADT for years. I've recently upgreaded from 2009 to 2013, and VOILA!
Hidden lines not removed from elevation and section objects. I've tried various tests, to no avail.....
just downloading Paint.NET v3.5.9(Beta Release build 3.59.4278.36311).
I have a PNG file for which I would like to remove the whitebackground howto do it in this latest version. I found an answer for this issue in the webhowever I cannot find the "Alpha Mask" under "effects" instep #2.
bestand easiest steps to complete this task in v3.5.9.
i've been digging around trying to find a plugin for 'spot removal', but haven't had any luck. am i missing it? i've found only one post in a all the forums that even mentions the word "spot".
View 4 Replies View RelatedI have an awesome photo .......except that there was a spotlight pointing in my direction as I took it. The result is a glare. Otherwise the pic is a classic chiaroscuro cityscape.
I know it cannot be totally removed, but is there a way its effect can be reduced almost unnoticeably. I tried -Adjustments: brightness/contrast- but reducing either just created a grey blot with a distinct "border".
Is there another PAINT.NET trick of the trade similar to "redeye removal" that can disguise these glares please, because I am sure this comes up quite often?
I attach a jpg file of a crop of the problem.
how to make wings from scratch on PDN. They don't have to be angel wings. They can be any type.
View 13 Replies View RelatedI've been trying to create realistic clouds from scratch. This is what I have so far. Make sure you click on it to view it in full size.
What can I do to make it look more realistic? Anything about the texture or whatever?
Just came upon an error I had not seen before. Though PSP no longer supports Animation Shop, up until PSP X4, the user has been able to export frames back to PSP from Animation Shop. Now, this no longer works! There's still some communication there, because an error message - which, incidentally, makes absolutely no sense at all - is generated in PSP X4:
View 2 Replies View RelatedIf I have 4 Scratch disks does photoshop use all scratch simultaneously or does it wait for the first scratch to fill up before it starts to use the next one ?
View 1 Replies View RelatedI installed PSP X4 today on a new PC with Windows 7 and noticed that it has no Animation Shop. Can I install Animation Shop to this machine? Will it work without PSP 9 or does it need certain dlls from PSP 9 ? I really want to be able to use Animation Shop again.
View 7 Replies View RelatedIs there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedMy program worked just great, then all of a sudden the paint brush and eraser will not do a thing.
View 14 Replies View Related1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
if is possible to create the paint drips in the attached design. I really want to learn how to create urban designs, is corel paint shop x3 suitable for that?
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?