1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
Corel Photo Paint X4.
I have an object with a clip mask.I post a new object.
How do I drag the clip mask existing in the new object?
I tried to drag with the mouse, but it closes the program.
Open up a picture
Create a Mask marquee and Cut [Ctrl X]
Undo twice [Ctrl Z twice]. You're now back where you started but with a cut object on the clipboard
Paste [Ctrl V]
Cut [Ctrl X]
Paste again [Ctrl V]
Cut again [Ctrl X]
In my case, the entire image has now been cut, not just the pasted object.The reason I do this is because I'm working with two virtually identical pictures. On one picture there has been a modification which I wish to paste onto the other. I cut and paste but need to align the pasted object with the picture. So, I paste the object and move it; then cut and then paste it to check it's in the correct position. If it's out of alignment then the image appears to move. There may be other ways to do this but I find this way easy.
I'm guessing that this is a super simple question, but evidently I'm not sharp enough to figure it out....I've imported a bitmap file [.tif] into PP, & it's MUCH larger than the letter-size canvas I'm using. So I'm wondering what the simple method is to fit that bitmap to the canvas. The thing that's driving me nuts is, I select this big bitmap [it's roughly 3300 px by 2800 px, FWIW], go into Image > Resample, & under "Image size" it's giving me 11.0 x 8.5! And why PP is saying that the image is already the same size as the canvas--well that's why I'm writing this post. Cause I don't know why.
View 1 Replies View RelatedI use the brush to paint. After a while I would like to change the color of that object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I am trying to delete an object background to create a gif of an object (the object in this case is a broken cell phone). Everything appears to be gone BUT...there are these flowing blue items around the object. When I export the file to gif...those items are still attached to the object.
I have used photo shop and have not had any issue removing a background around an object.
making a GIF with PP. I'm working on a really simple one, I have a background, and I have an object that I want to move into the frame, then back out of the frame. Then loop.
Do I really have to combine the moving object with the back ground EVERY single frame?
Is there a way to say take this object over this many frames and move it from here to there?
Is there a way to save the position of the object in each frame without combining it to the background each time? I'd like to set it, go to the next frame, move it, go to the next frame, move it, repeat.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
When I'm working in PP on designs with many layers I have problem with uncontrolled attaching to object i'm moving.
For example I'm moving object to bottom of page using shift + page down and after trying to move it few layers up using ctrl + arrow up. Sometimes two objects moving instead one. Its random error so hard to simulate it when you want.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
How can i add a paragraph text inside an object with photo paint x4?
View 4 Replies View Relatedmatching the skintone of an object which I am pasting onto another skin tone.
View 2 Replies View RelatedWhen I'm saving my file as PSD I have strange error with "nice" description.The only way to avoid it is search and delete design elements - I found that its caused by one text object.
The question is what can be wrong with text object to generate this error. I can edit text and do everything with it but I cant save it as PSD. Its hard to find it in big complicated designs. I think similiar problem was in Corel Photopaint X3. Seems like it left to X6 version.Bug exists in all files with text objects.
system configuration:Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version: X6 VERSION: 16.4.0.1280
I've tried to use it, but how to generate the flashing light in a separate object. This is possible because while trying I did it, but now I cannot do it and it does the flashing light in the same layer of the background of the image.
View 2 Replies View RelatedI'm trying to rotate a small object in Paint. When I use the rotate toolbar to enter the angle I need, the object rotates just like I want. Then I hit the apply button and some pretty heavy handed anti-aliasing is applied and the object is essentially destroyed. I've been using Paint for quite a long time so I figured there must be an option to turn this off. I can't find one. I even added the anti-aliasing button to the rotate toolbar and turned it off but that doesn't make any difference.
Essentially, what I want when I rotate an object is the chunky, pixelated preview, not the final anti-aliased so much you can't tell what it even is anymore final product.
At this point, I'm going to have to resort to rotating the object and taking a screenshot of the preview and using that instead of the mess that the final result is.
My questions is when I draw a line or circle / rectangle no fill, it is nice solid black color lines but when I start manipulate the object and when I am done I have to press right click and apply transformation and the object is not black anymore some grey tones are added to the lines. How can I keep the solid black line?
View 1 Replies View RelatedI am trying to edit some pictures that a customer of mine has taken. They are of silver utensils wrapped with beads and the way she has taken them, there is a huge shine reflection on them. There are 25 current pictures all using the same dark background.
I have fiddled with the adjustment brightness and highlights, but they come out looking gray and fake, so I removed those adjustments.
I tried using burn the bright spots and then dodge the coloured stones to bring back some luster. No matter what i am doing, it no longer is a silver utensil, it is a picture that has been poorly edited, and that simply isn't okay.
Here are some examples of the raw picture I am working with [URL] ...........
I need to reduce the glare/reflection and the stones need to be vibrant.
There is a UI bug in PP X6 where the fields for size on the property bar when using the object picker tool show a tooltip "Scale". See screencap
View 1 Replies View RelatedI have one object and want to paste behing another object i.e. object will be pasted behind the fense, how can i do this.
View 10 Replies View RelatedI'm using AI CS6;
I have a type object with an opacity mask created in one document. When I copy and paste this object into a new file the text is pasted without the opacity mask attributes. I can separately copy and paste the opacity mask object but then I face a tricky realignment to repeat.
Below is a screenshot of something that sometimes happens when using the Mask Transform tool in Photo-Paint X5 (Home & Student). It only does it when dragging the mask from the right. Is this a known phenomenon? Can anything be tried to overcome it? I wondered it might be anything to do with graphics card compatibility ..or just my computer in some other respect.
Windows 7 Home Premium 64-bit - ATI Radeon HD 3800 - 4GB RAM
if it is possible to transfer a .CPT graphic, created in PP_X4, into PaintShopPro_X3, as well as from PSP_X3 to PP_X4 if that is possible.
I have tried cutting and pasting, but without success.
In my opinion removing window with paste parameters like size and dpi in X6 was bad decision.
Now I have to remember to make vector objects big enough to avoid pasting them too small in photopaint.
99% of photostock vector files are too small to copy/paste them without resizing.
As webdesigner I can tell that old version of "paste" had better functionality .
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
I bought Corel Draw X5 sometime back and had no issues.Then two weeks ago I purchased the Corel Draw X6 upgrade to take advantage of the 64 Bit design and the Free Corel Web Designer add on.My system is an AMD Phenom 965 x4 with a Win 7 HP 64 Bit OS loaded... 8GB RamI did non uninstall CD X5, when I loaded the CD X6So the problem....In Connect when I open a folder with pic files (raster) the Viewpane icons display normally...when I open a folder with Clip Art (vector) files each file displays the same default thumbnail with filename text caption... In my previous CD X5 32 bit install the Connect app worked with out errors displaying a Clip Art vector preview. Now after installing X6 64 bit, Connect in both x5 32 & x6 64 does not display previews for the clip-art .
View 3 Replies View RelatedI think circle after reduce using mask should stay circle instead of you can get in photopaint.
Steps:
1. make 10px circle
2. make mask from it
3. reduce mask by 3px
4. crop object to mask
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
How to create a luminosity mask in Photo paint?I know there was a macro but the site is in Russian and I'm not so good in that to read the instructions.
View 13 Replies View RelatedWhy Corel Photopaint X5 dose not have lasoo Mask Tool (endless /connected) like magnatic mask tool (one end ) or Adobe Photoshop lasoo tool?
In my earlier post i quote Corel Photopaint 5 instead of Corel Photopaint X5
Does Perfect Mask 5.2 works as a plugin in PhotoPaint X6?
View 4 Replies View RelatedIf I'm using the color mask and i want to know the luminosity of an image can I use it for Luminosity mask?the reason is PP does not have something as Photoshop.
View 12 Replies View RelatedI am creating a mask in Photo Paint and feathering the edges. Everything works fine up until I "Finish Editing" and the object is returned to Corel Draw. The mask has shifted up from the image and the wrong area is masked. If I save the image from Photo Paint and re-open it it's fine...just not when it's sent back to Corel Draw.
View 5 Replies View RelatedSo let's say I want to use a picture of a coca-cola bottle from an image I found on the internet, or I take a pic of one... what is the best way to cut-it-out?
1) For instance, sometimes, the object is cut out of a white background and I want to use it on a black background... leaves a nasty outline :( - maybe its easier to take a pic of the object on a black background (which is what I usually do - but I don't feel like getting the camera out - besides, I then almost always need to touch up the photo)
and
2) how do I easily smooth the edges if a use the colour wand? before or after cutting out (Copy to clipboard)?
I must have fat fingered something and I now when I click on the Eraser Tool or the Brush Mask Tool instead of getting a circle or square, I get and icon of the tool instead. They still work but they're harder to use without seeing the circle or square depending on what's selected. I've been using Corel for many years and never had this happen and I can't figure out how to switch back.
View 3 Replies View Relatedthe size of the brush at the Brush Mask Tool can not be changed when I pressing the Shiftbutton
X6.4 - Win7
