My questions is when I draw a line or circle / rectangle no fill, it is nice solid black color lines but when I start manipulate the object and when I am done I have to press right click and apply transformation and the object is not black anymore some grey tones are added to the lines. How can I keep the solid black line?
View 1 Replies
I haven't found a way to turn a color photo into a Black & White outline drawing in Corel PhotoPaint X5.
View 11 Replies View Related1. After creating a clip mask can I view it without the actual object also being visible?
2. Can I paste one object into the clip mask of a different object?
What format would I need to save a scanned in black and white line drawing so that I can color it in using the Fill function (like a comic book)? I used to do it with earlier versions on PhotoPaint (6 and 9) but haven't done it in a while and now cannot find the right format.
Now what happens is when I use the fill function the whole image turns to the selected color, it wont recognize the black lines as borders.
I'm guessing that this is a super simple question, but evidently I'm not sharp enough to figure it out....I've imported a bitmap file [.tif] into PP, & it's MUCH larger than the letter-size canvas I'm using. So I'm wondering what the simple method is to fit that bitmap to the canvas. The thing that's driving me nuts is, I select this big bitmap [it's roughly 3300 px by 2800 px, FWIW], go into Image > Resample, & under "Image size" it's giving me 11.0 x 8.5! And why PP is saying that the image is already the same size as the canvas--well that's why I'm writing this post. Cause I don't know why.
View 1 Replies View RelatedI use the brush to paint. After a while I would like to change the color of that object.
CorelDraw X5 v. 15.2.0.686 Hot Fix 4 - Windows 7-64
I am trying to delete an object background to create a gif of an object (the object in this case is a broken cell phone). Everything appears to be gone BUT...there are these flowing blue items around the object. When I export the file to gif...those items are still attached to the object.
I have used photo shop and have not had any issue removing a background around an object.
making a GIF with PP. I'm working on a really simple one, I have a background, and I have an object that I want to move into the frame, then back out of the frame. Then loop.
Do I really have to combine the moving object with the back ground EVERY single frame?
Is there a way to say take this object over this many frames and move it from here to there?
Is there a way to save the position of the object in each frame without combining it to the background each time? I'd like to set it, go to the next frame, move it, go to the next frame, move it, repeat.
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
why custom made nibs thunbnails show as black dots in PhotoPaintx6? Also when I select one of them...it just sprays a dot instead of my image? I saw where others are having the same problem. Some are and some aren't. As long as I leave the custom made nibs loaded they display and spray correctly. If I load the default nibs or any other nibs then go back and load the custom nibs..that's when I get the black dots. I've remade my nibs several times thinking I did something wrong but that's not the problem.
Windows 7 64 bit, Intel Xeon 3.30GHz, 32GB memory, ATI FirePro V4800, (1)10,000 Velosirapptor internal HD, (1) internal 1TB HD, (1) 500GB external HD (2) external 3TB HDs, (2) HP z6200 printers, (1) OKI 9650 printer (1) Roland Camm1 Pro vinyl cutter
When I'm working in PP on designs with many layers I have problem with uncontrolled attaching to object i'm moving.
For example I'm moving object to bottom of page using shift + page down and after trying to move it few layers up using ctrl + arrow up. Sometimes two objects moving instead one. Its random error so hard to simulate it when you want.
system configuration:
Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version:
X6 VERSION: 16.4.0.1280
How can i add a paragraph text inside an object with photo paint x4?
View 4 Replies View Relatedmatching the skintone of an object which I am pasting onto another skin tone.
View 2 Replies View RelatedWhen I'm saving my file as PSD I have strange error with "nice" description.The only way to avoid it is search and delete design elements - I found that its caused by one text object.
The question is what can be wrong with text object to generate this error. I can edit text and do everything with it but I cant save it as PSD. Its hard to find it in big complicated designs. I think similiar problem was in Corel Photopaint X3. Seems like it left to X6 version.Bug exists in all files with text objects.
system configuration:Win 7 Pro 64bit, Intel i5-2500, 8 GB RAM, 128 SSD SAMSUNG + 2TB on hard drives.
corel version: X6 VERSION: 16.4.0.1280
I've tried to use it, but how to generate the flashing light in a separate object. This is possible because while trying I did it, but now I cannot do it and it does the flashing light in the same layer of the background of the image.
View 2 Replies View RelatedCorel Photo Paint X4.
I have an object with a clip mask.I post a new object.
How do I drag the clip mask existing in the new object?
I tried to drag with the mouse, but it closes the program.
I'm trying to rotate a small object in Paint. When I use the rotate toolbar to enter the angle I need, the object rotates just like I want. Then I hit the apply button and some pretty heavy handed anti-aliasing is applied and the object is essentially destroyed. I've been using Paint for quite a long time so I figured there must be an option to turn this off. I can't find one. I even added the anti-aliasing button to the rotate toolbar and turned it off but that doesn't make any difference.
Essentially, what I want when I rotate an object is the chunky, pixelated preview, not the final anti-aliased so much you can't tell what it even is anymore final product.
At this point, I'm going to have to resort to rotating the object and taking a screenshot of the preview and using that instead of the mess that the final result is.
Open up a picture
Create a Mask marquee and Cut [Ctrl X]
Undo twice [Ctrl Z twice]. You're now back where you started but with a cut object on the clipboard
Paste [Ctrl V]
Cut [Ctrl X]
Paste again [Ctrl V]
Cut again [Ctrl X]
In my case, the entire image has now been cut, not just the pasted object.The reason I do this is because I'm working with two virtually identical pictures. On one picture there has been a modification which I wish to paste onto the other. I cut and paste but need to align the pasted object with the picture. So, I paste the object and move it; then cut and then paste it to check it's in the correct position. If it's out of alignment then the image appears to move. There may be other ways to do this but I find this way easy.
I am trying to edit some pictures that a customer of mine has taken. They are of silver utensils wrapped with beads and the way she has taken them, there is a huge shine reflection on them. There are 25 current pictures all using the same dark background.
I have fiddled with the adjustment brightness and highlights, but they come out looking gray and fake, so I removed those adjustments.
I tried using burn the bright spots and then dodge the coloured stones to bring back some luster. No matter what i am doing, it no longer is a silver utensil, it is a picture that has been poorly edited, and that simply isn't okay.
Here are some examples of the raw picture I am working with [URL] ...........
I need to reduce the glare/reflection and the stones need to be vibrant.
There is a UI bug in PP X6 where the fields for size on the property bar when using the object picker tool show a tooltip "Scale". See screencap
View 1 Replies View Relatedremoving a background from a photo.
For example, remove the grass from this photo:
Make it look like this:
Current System: i3 3.07ghz, 3gb ram, Windows 7 32 bit with all updates and X6
I want to know how to resize a photo without loosing quality....... in the image resize box the is a check box that says maintain file size ......what does that do .
I have tried to resize using it and the file stays the same as the original.
I am trying to change the background of a photo. Not just change the color but change the color AND make it keep it's original shading, etc. I have some family photos we had made recently and they used a beige color draping for the background. The ones we had made before had a black draping. I was wondering how I could go about using some sort of additive coloring to transform the varying shades of beige to the same varying shades of black.
I have already used the masking tool to separate the background from the rest of the photo.
I want to create bulging eyes in a photo that i have. I would do this in photo paint?
View 10 Replies View RelatedIn a photo, I cut out an elliptical or round face.I saved the cutt image as .; "New from clipboard" No problem, the background is now transparent.
But now I want to make the edges of the oval or round image transparent.(then I want to put the result image on another image)
How can I make the edges transparent with Corel Photo Paint (or Corel Draw)?
Is there an easy way to do color tints on a photo in PhotoPAINT? And by that I don't mean just correcting the tint, I mean converting a regular photo into one that has a single color tint (e.g., yellow, red, etc.). I've tried graying it out and then adding a transparent color layer over it, but I'm not getting the result I'm looking for.
Also, while I'm at it, are there any (current) books out that cover PhotoPAINT in depth? I know that the official DRAW book has a section on it, but it's pretty basic.
The current crop of photo sharing apps like Instagram have made filter effects a popular way of adding some extra vim to your shots. What if you want to give the ‘retro’ look to photos that aren’t on your phone though?
How can we create retro looking photos in PhotoPaint?
Is this possible to do in photo paint and is there any tutorials on it?
View 12 Replies View RelatedAs a service, I am setting up some photos that will be exported as png files for use in Publisher.
I need grungy photo edges to be transparent so her background shows through the grunge effect.
Thought I knew how to do this but it's not working.
I would like to use a photo frame from connect, and keep it in the Effects>Creative>Frame menu of frames. I have downloaded and clicked and dragged the frame to my image, but I would like to reuse this frame. Is it possible to add it to the menu? I can download it to the menu - but it is a temporary item in the list of views to the right, which can be replaced from any of the permanent members of the dropdown selection of frames on the left of the Frame menu. I would like a frame to become one of those "permanent frames."
View 1 Replies View RelatedHow to alter a scanned newspaper photo to get it to look like a continuous line photo using cpp apps? is there a tried technique? i tried tracing in cdgs but it looks like the dabble app was applied in cpp i want to try and get rid of the 65 line printing ink dots. if no one has a way, i will post one if i am successful. trial and error can be fun if you have the patience and fortitude.
View 11 Replies View RelatedI am making a background image for a website in Draw. The main part is Black.
I export as a jpg and the image looks fine when I view it.
Then if I open it in photo-paint the black is not black, but rather has a grey color to it. The image is exported fine and looks great when viewing it with the normal windows photo viewer program.
Something is happening when it is opened up in photo paint I think.
