When I try to print, the print placement dialogue box shows the image in greyscale, and when I click the options tab, the options to print color and CMYK separations are greyed out. Going ahead to print gives me a B&W print. The same file prints perfectly in color in PSP X3. What setting I need to tweak?
View 2 Replies
Is there a Print Layout in X5 similar to that in Paint Shop Pro?
View 1 Replies View RelatedI'm exporting Tiff Prophoto files from Lightroom into PSPX4 for further processing. The images are 1 to 2 stops under exposed when compared to Lightroom's image.I have selected PSPX4 color profile to match LR export color space.
I have tried exporting the Tiffs as sRGB and adode1998 and still the images are under exposed. I have little knowledge about color management and have searched around the web for possible answers, but no luck.
For family history purposes, wish to improve the legibility of some hand written 1930 telegrams; the ink has faded with time so I want to change its colour to black. The form printing has not faded.
The user guide draws attention to the fact that the color selected for replacement must be in the image. Using the Dropper tool with sample size 1 pixel I position the dropper where I want it, see the color in the preview window, then right-click and the selected color appears in the background window on the Materials panel. So far, so good. I then place the Dropper tool over black in the swatch on the Materials panel, click and black appears in the Foreground window of the Materials panel. I think I'm set.
When I select the Color Replacer tool the background window immediately reverts to another color, usually white.Incidentally, the user guide suggests you read up on selecting colors with the Dropper; when you do this you learn that its OK to pick colors from the Materials panel.
Question #1.
Were can I change the "color saturation" to use for my "color changer"?
Question #2.
When using "point-to-point" or "edge seeker", is there a way to go back one or two steps, without having to start all over again?
The placement dialogue for printing which used to be in inches is now in mm and there seems to be no way of changing it back to inches.
View 2 Replies View RelatedThe first job I want to do is work on a series of pictures taken on successive days, and then print them out four to a page to show a consultant. I don't appear to be able to do anything so simple and am astounded.
View 4 Replies View RelatedI just installed PSP 4. I use print layout templates in my photo business. I have 115 layout templates that I backed up from PSP 3. When I copied the print layout templates into PSP4 the Print Layout templates interface crashed including the Averys.
View 2 Replies View RelatedI want to use the paint brush for editing a photo I have, but the only color available is black. No matter where I've looked in PSP, there was no option to change the color of the paint brush. I've read online that you need to change the pallet to material pallet, then go to "Foreground & Stroke Properties" and set the color box to the color I want, but the only colors I get are different hues of black and gray.
Even in Paint it's just a matter of clicking the desired color to use different colors. Why isn't it so simple in PSP?
In my version of X6 32-bit, there is a problem with the icons in Print Layout, they're not the normal icons, but one's used when tying as script to an icon.
I have re-set X6, using the Shift key method, but the problem is still there. I can use the menus and print, but those icons don't belong there.
Is there a way to print exif and iptc data using paintshop pro X4 ?
View 1 Replies View RelatedIs there anyway to bring up a the printer dialogue box or tell the printer I need more than 1 print of the layout? It's time consuming to hit that printer button x number of times. I just had to print 50 pages of the same layout today and it would be so much easier to let the printer print the 50 copies instead of sending 1 page 50 times to the printer.
View 1 Replies View RelatedI have PSP x14 on win7 64b. I would like to make a photo look like it's on a canvas so that it would show a depth of border along the top and down the nearest side. I have tried altering the perspective and adding narrow selected lenght from the top and side of the original photo but am still not getting the effect I am after.
View 2 Replies View RelatedI want to print an image on a DVD with a white printable surface in PSPro x.I want to be able to gradually feather the white edge given to the image (what is the best way to do this) so that it blends into the white background of the disc and therefore the square edges of the image do not show.
View 11 Replies View Relatedwhen i resize an image for example to 27 x 18 cm there is no problem however, when i try and print the image and the preview window comes up there seems to only be a tiny part of the picture visible? its basicly a tiny square in the top left corner of the preview page and its just big enough to see its a minute part of the image i want to print. If i try and print the image anyway i just get "could not start print job".I never had any issues before then suddenly a few weeks ago the problem happened in version x2 on any pictures i tried to resize and print , so i updated to x3 in the hope it would correct the error but its still there. Any setting somewhere , i tried using a trial version of a rival program and that worked fine and showed the print preview exactly how it should.
View 1 Replies View RelatedI have PSP X4 SP2.
Current color working space: AdobeRGB1998.icc.
I want to take HDR photo. I have 3 pictures JPG in AdobeRGB1998. When I giving HDR/MERGE EXPOSURE program automatically changing color profile of my pictures from AdobeRGB for sRGB. Why does it happen?
Just updated from X3 to X4. Spent an hour looking for the workspace color so I could get rid of the huge graphite box. Updated to SP1, found this forum, saw how to change the color in the files menu, and was very disappointed that the menu backgrounds changed, but not the BIG GRAPHITE BOX IN THE MIDDLE OF THE SCREEN!!
X3 gave us control of the colors. X4 is a big disappointment.what about the big graphite elephant in the room, the workspace?
the image is attached.I would like to make the pin "blue", without loosing "real" appearance.
View 6 Replies View RelatedI understand many of the aspects of color management: gamut, color space, profiles, calibration, and most of the accompanying pieces. The problem is that I don't understand the inter-relationships of the various steps between taking a photo and printing it.
My equipment is not wonderful. If I were serious, I would have spent 10x what I did; but I'm not a pro. I'll settle for the best I can squeeze out of it. My goal, at this point, is to get my prints to look like what's on the screen.
For software I am using PSP X6 and Windows 8.1.
The photos I get come from various sources. As I understand it, those images (primarily JPEG if they come from a camera, presumably RAW if I scan directly into PSP) should have the profile of the capturing device embedded in them. Is that correct?
In the past I've been told that I should always use the color management in my editing application, rather than whatever Windows makes available. Is that still true? So far as I can tell, there is no way to turn off Windows Color Management (WCS).
You can turn off color management in PSP. There is a checkbox for it.I've been reading that I should set my PSP color working space to sRGB. Is that turned on and off by the color management checkbox? Assuming I have a profile for my capture device (camera or scanner), should I use that profile instead?
I have factory supplied profiles for both my monitor and my printer. Supposedly the printer will automatically select one of its various profiles based upon the paper I use, but that's a setting in WCS. (I can force a particular profile if I want.) In PSP's color management, I have to pick the profile manually.
Should I turn off color management in PSP, and set everything up in WCS? WCS has a setting for viewing conditions. The default is "WCS profile for sRGB viewing conditions", the alternative is "WCS profile for ICC viewing conditions". Does that mean that I could (or should) get an ICC profile based upon my work area's lighting, etc.
In the X3 version there was a menue setting for the color of the work space where you could change it and not have to use the Graphite color. In the X4 version there is nowhere to select non default color. There should be as not everyone wants to be forced into having it the default"graphite or whatever"color.
View 10 Replies View RelatedI no longer have my Paint Shop manual and I don't know what "this" is called to search here or in my help section of my software.
I have Paint Shop Pro Photo X2, version 12.00
I want to change a pic I have of Jimi Hendrix like the one below so I can sketch it onto a canvas. I have played around with Photo shop.
73164_145358045511754_102317626482463_234732_3842573_n.jpg (20.36 KiB) Viewed 586 times
Coming from Pspx2 into Pspx4 this week. Applied a text title to a border on an image yesterday. Accustomed to having just a background colour for plain text. Went to click off the foreground colour and could not find a choice for NO COLOUR in the foreground Also No text box.....what happened to the text box?
What is the procedure for plain text with a single colour now in Pspx4
I am having a rather strange problem with PSP X14. I will describe my general workflow and where the problem occurs.
I do some editing to my photo and save it as a full size image. Next I resize it to a much smaller version for use online. I have no problems at all with these two steps. Next, I cancel the resized dimensions and resize it again to a file closer to the original size, after I sometimes sharpen it and add a canvas. Many of the thumbnails for this last step have horizontal color bars across the bottom of the thumbnail, ranging roughly from 1/16 to 1/3 of the image size. When I hit on it and open the file, the bar is not there. I tried opening this thumbnail in another photo editing program and when I have access to the thumbnails for opening, that bar is there on select images, and when I open the file, it's gone. Unfortunately I haven't had the opportunity to try printing it yet.
I've been following this basic formula for preparing and editing photos for a very long time and haven't had this problem until recently. And it's random, as not all images have this problem. I tried changing this process and reopening the full size file that has been edited and resize that one, but am getting the same random results. I have no problems with the thumbnails for the full size and the first reduced size images.
I have been a long time user of PSP...since v.7 and upgrade versions regularly. I'm running Windows 7 premium, 64-bit on a laptop with an Intel i-7 processor.
In my PaintShop Pro X4 there is a plugin called "Color Efex 3.0 Pro Complete" by Nik Software. Can I get that plugged into my PaintShop Pro X5? How?
View 2 Replies View RelatedI downloaded the trial of PSPx4 and sadly enough the trial does not include Nik's Color Efex Pro 3 (CEP3). What I would like to see, is if the CEP3 window actually fills the screen, or if it is smaller and the user unable to "maximize" it.
View 4 Replies View RelatedI'm testing the trial of X4, and it opens in an unpleasant window which has a dark gray background - is it possible to change the color of this background?
View 13 Replies View RelatedI downloaded a trial version of PSP X4. When i export an image from ASP in ProPhoto RGB color profile, PSP insist to convert it to sRGB. I wonder what is the color profile that been used by PSP as the working space?
View 9 Replies View RelatedAny way to simply remove a color by replacing it with a transparency? More specifically, the background of my image is solid black but the object itself is a little too intricate to cut out via the selection tool.
View 1 Replies View RelatedI tried moving Nik Color Efex 3.0 out of PSPx5 Plug Ins folder into PSPx6 Plug Ins folder, but that didn't work. Tried plugging in via Preferences...File Locations...Plugins... but that didn't work either.
I installed 64 & 32 bit version per the installation instructions. Is there anyway I can install Nik Color Efex that came with x5 into x6?
I have a problem with the display of images that come out too blue. The thumbnail looks correct but the large preview image has too much blue. I have processed the same raw images in other software with no issues but this seems to be an issue with Paint Shop Pro. Is there a setting that needs to be changed?
Once I open the image the image in the raw converter it shows the color balance "As Shot" as a different value that what the Adobe software reads. Not sure why. You can try and adjust the blueness out of the image but why do I need to do this all the time when I don't have to in other programs.
If I open any image in the full editor the thumbnail takes on this too blue look as well, even if no color adjustments were made.
I have attached 2 screen shots that show the problem.
I wonder if there is a way to do something like that in PSP: [URL].......
View 4 Replies View Related
