VideoStudio :: Audio Lost When Split A Video File
Dec 11, 2011
I have been using Corel VideoStudio Pro X4 recently. I split a number of video files on a daily basis. This is what I do:
I take an Avi file that has a duration of about 30 minutes. I drag and drop the video into the "video track" area in the program.
Then I use the little "slider" thing and drag it to 15 minutes and click on the "scissors" symbol. which results in making the video split into 2 parts.
I delete the first part on the "video track" are and then I click on "share"-->"create video file"-->"custom"-->I choose Avi .
The compression I choose is Xvid Mpeg-4, 24 Bit RGB, and the Audio Format is Mpeg Layer 3, 8 Bits, 11.025 Hz Mono
The resulting video does not have any sound . This does not happen if I delete the 2nd part and create the video file with the first 15 minutes only. This happens with almost all of my videos (all of them are avi).
View 3 Replies
ADVERTISEMENT
Jul 30, 2011
Because the inbuilt MPEG encoder lack descent contrast Im thinking of using another video/audio encoder. I then have a question about the audio. If I separate the audio from the video in the project, is the 5.1 information preserved in the wav file?
View 2 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Nov 3, 2010
I captured approximately 1 hour DV file contained different scenes from different places. Now, I would like split this file for smaller parts and save them as a separate .avi files.
Is this possible to do this by VSX3 (e.g. cut or multitrim on timeline and save to separate folder each pieces?
If X3 cannot do this, what software you can recommend for relatively easy and quick multi-split, without loose quality?
View 5 Replies
View Related
Jan 11, 2011
A friend of mine shot some video with his JVC everio on 1/8/11.The native files PLAY fine in VS3 however any attempt to convert to any output video file or just output the audio track (which is what I really want to do) results in random audio "skips" like what happened when an LP had a scratch and a stylus couldn't play it.I have VS SP2 installed along with the audio patch on the Corel site.
I've successfully exported the MOD files to other formats using a freeware program called Video Pad from nchsoftware.com, so I can only assume VS has a problem.
I thought before I downloaded that MOD file converter, that's been discussed here, I would ask.Seems that a PAYware software like VS, shouldn't have this problem.Prior to using MOD files, I used AVI files in VS and exporting to an audio file worked just peachy.
View 14 Replies
View Related
Jun 13, 2011
How I can add an edited audio file to a MP4 video file? The problem is that the MP4 video already has audio files included with the import. I want to change those file and add the edited files. It seems that I can't delete or cut the audio files out of the video clip to add the edited version. By the way I am using Corel Video Studio Pro X3
View 1 Replies
View Related
Nov 3, 2010
The Pro X3 help file says I can extract audio from a video file, but doesn't say how. What I would like to do is extract a segment of audio music from an MPEG2 video file using PRO X3 and add it to the Library for use in another PRO X3 project.
View 4 Replies
View Related
Sep 15, 2012
When I go to render a video that is composed of video clips and an .mp3 music file, I'd like to get the finished file into as big of a file as I can. In order to do that, I select the MPEG-4 option. The good news is it typically will result in an approx file size of 250MB for a 2 1/2 minute video, versus 170MB for any other file extension. The bad news is the audio is full of pops and noise. The audio remains fine with any other option other than MPEG-4.
I've tried numerous ways to 'reconstruct' the file...using different audio file extensions (it seems to prefer .wma files but there is a noticeable drop in clarity), rendering the video only then adding the audio file and rendering again...nothing works. I've also tried to modify the rendering options in each video selection that Corel offers (this is in the window that pops up asking for the file name just before you render it), but the audio never gets better.
View 2 Replies
View Related
Apr 19, 2012
When the video file is saved and burn on DVD disc and play on a DVD player, only the images appear on the TV screen but there is no sound coming out from the speakers. I'm using Studio Pro X4
View 7 Replies
View Related
Oct 28, 2013
After spiting the audio form a DVD in X5, I want to make a CD of the audio (narration) .What is the best way to do ?
View 5 Replies
View Related
Nov 27, 2012
I'm using Corel Video Studio Pro x4 to make a promotional video for an upcoming event, and I used the split audio function to, surprise, separate the audio. Here's the problem: It has no sound. When I play it as a clip, it works fine. But if I play the project as a whole or add any kind of filter to it, it is mute. I've tried saving the project and opening it in a media player, still nothing. My music track and video track play fine, but the split audio does not.
View 7 Replies
View Related
Jul 15, 2013
Is it possible to undo the Split Audio function once you have used it?
View 2 Replies
View Related
Jul 10, 2011
I have recently upgraded my old VideoStudio 12.00 to VideoStudio Pro X4 and have only just started using the program again after a couple of years of absence so I am still on a learning curve.
Can I extract the audio from a video clip and if so how and how can I convert it, if necessary into an Audio Interchange File Format, so that I can export it to a program such as Audacity for removing background wind noise before importing the Audio back into the videoStudio project.
I have tried using all the audio filter functions in VS to remove the background noise, to no avail.
View 6 Replies
View Related
May 14, 2012
I've edited with VideoStudio 7, 10, 11, X2, X3 and X4 and just switched to X5. An issue that I experienced (and resolved) early in my use of VS Pro X4 has now resurfaced with VS Pro X5 and I can't recall how I "fixed" the issue last time.
My main video track is in its usual spot on the top row of the timeline (in Timeline View). Ripple editing is enabled. When I use the scissors to manually split the main track at any point, an audio fade-in is automatically applied to the trailing clip after the split. At the same time, the audio levels on both the leading and the trailing clip (before and after the split point) are instantly reset to 0 db. This is particularly maddening when I've carefully re-adjusted my main track's audio levels before applying the split.
View 7 Replies
View Related
Aug 21, 2011
I have a project with dozens of clips. Is there any way to mute or split audio for all or multiple clips rather than doing it for one clip at a time?
View 2 Replies
View Related
Dec 5, 2012
When adding audio to a video file inside PS CS6 i loose the preview functionality. How can i fix this?
View 2 Replies
View Related
Mar 23, 2014
It was working before. Now I can't insert any audio at all. I even tried using some of the video clips that I have already extracted audio from and they no longer work. When I have it up in the source box I can play it and the aeudio is there. But if I ovrwrite the clip or drag the clip it adds the video only with no audio. Even if I try to drag just the audio it won't allow me to put it in any ofc the audio trays. Did I acidentally push a button and turn iaudio off. How do I fix this?
View 1 Replies
View Related
Feb 20, 2012
I am using VSP X3 Pro on a Windows 7 Professional 64bit PC. Input video files are AVCHD from a Canon SX 210s camera.
Picture format is QuickTime 1280x720, 24bit, frame rate 29.97, sound 16bit little Endian, 48000kHz, 16bit stereo. Files copied from an SD card.
I find that if I insert transition effects I lose the original recorded audio from that point forward in the clip that follows. If I do not use transition effects then the audio is fine. If I subsequently remove the transition then the audio is restored. It appears the transitions are the root cause of the problem. Identical problem if I use my Windows 7 32 bit laptop. The audio track remains visible in the timeline even when no sound can be heard.
Based on a previous suggestion I've used a workaround by converting the clips to a different format before editing. Using AVI, the audio in clips following a transition file is not lost but the video quality is seriously degraded.
I've reinstalled the software & all the three available patches. The problem has been around ever since I moved to my new PC on Windows 7.
View 14 Replies
View Related
Jun 25, 2013
I use VS ver 10.0 and during working on a project there were no problems. I use different files (audio and video) and after rendering lost some mpg audio files. Video is still there but audio is muted. wma and one mpg files works fine.
Project properties:
PAL (25 fps)
MPEG files
24 bits, 720 x 576, 25 fps
Lower Field First
(DVD-PAL), 16:9
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 224 kbps
MPEG audio layer 2, 48 KHz, Stereo
wma file properties (works fine after rendering):
mpg files, different ones (works fine after rendering):
mpg files (do not work, muted):
Is it possible to save them (muted audio)?
View 7 Replies
View Related
Feb 13, 2013
I often work in big files, such as 200 GB size files that usually contains 4-5 hours of recording. I make web series and require my videos to by like 15-20 minutes long. So far I've been taking these huge files, cropping them down to length and then waiting the compress, however this is a very bad method and very time consuming, because after I crop a video that fits the 15-20 minutes limit, I have to wait for it to compress completely before I can continue to work on the next one, which basically means, that even though it takes like 5-10 minutes to edit a video it takes more like an hour per episode because I need to stop and wait before I can work on the next episode.
Is there a way to queue up a ton of pre-edited projects and then make it all compress to seperate video files during the night or something? It would really save me a lot of effort.
View 2 Replies
View Related
Jan 18, 2009
I have recently bought the upgraded version of vsx2 (upgraded from vs10) and AGAIN i have experienced lost video filters.
The symptoms are slightly different, "video filters" are still listed in the drop down menu but when I click on them a tab pops up that read "all" when I click on that the library clears and only empty space is there, no filters. Is the fix the same as it was for VS10?
View 5 Replies
View Related
Oct 15, 2010
I am using VS X3 and recently have a problem with it. At the time moive created there are couple clips in dark but they were ok when I edited them in the project status.
View 6 Replies
View Related
Jun 29, 2013
I recently had a senior moment, sigh. I ended up deleting my video 5 ultimate . I finally installed it back again, For some reason, x4 samplesvideoPo3 UVP files doesn't exist. Actually I had Studio prox5,prior to buying the ultimate program. I also have problems with my auto music, cant find those files. I didn't think that I had the files from pro X 5. still in my computer, Is it possible to reinstall the prox5 and the missing files will be back where they should be?
View 12 Replies
View Related
Mar 25, 2011
I have never used any video editing software and I have a Video issue I want to shoot video with a Nikon D3100 DSLR in either 720P or 1080P. The camera produces MOV format (see more at the end of the post). I want to record the audio on a Zoom H4 digital recorder (see more at the end of the post.)
I want to combine the audio from the H4 and the video from the Nikon and have them in sync. The vid is of musicians so I need the video of the musicans hands syncing properly with the music they are playing. This will be shot in a "studio" situation. Not a concert.
I will ask the main quesitons first then give some tech specs on the gear.
1) Can the Corel X3 or X4 video software remove the audio from the MOV file and replace it with either the WAV or MP3 from the Zoom H4?
2) With two different devices recording audio and video, will there will be some differences in sync that have to be corrected?
3) Can Corel make adjustments to the audio speed without changing pitch if I need to do that to sync the audio to the video?
4) The H4 can record in WAV or Mp3 in a variety of bitrates. Forgetting the audio quality, does the WAV or MP3 format make a difference as far as syncing goes?
5) If all of this can be done in Corel does it make a difference if I get the X4 or the less expensive X3 software. At least at this point the only extras I would be adding is a title.
Tech specs on the equipment:
The Nikon D3100 produces HD video in .MOV format using file compression of H.264/MPEG-4 Advanced Video Coding.
Frame Rate is:
1,920 x 1080 (Full HD) 24p (23.976fps)
1,280 x 720 (HD) 30p (29.97fps)
1,280 x 720 (HD) 25p (25fps)
1,280 x 720 (HD) 24p (23.976fps)
The Zoom H4 can record in either WAV or MP3 in a variety of bitrates, including 44.1, 48 and 96kHz.
View 2 Replies
View Related
Feb 2, 2012
I am creating video in FLV (custome mode). The only audio compression option is PCM which makes video too big.
How do I add different audio compression codec for FLV video? With other video formats/codecs mpeg-4 I have many moore audio compression options, but not for FLV.
View 7 Replies
View Related
Dec 27, 2011
I've edited together some PAL SD video clips, that I copied and pasted from my Sony DCR-SX53ES camcorder, and auto-generated music and when I preview the project through the edit screen everything is okay. I then selected Create Video File and DVD and the output file completed successfully, however, when I play back the file both the original audio from the video clips and the added music are out of sync with the video pictures by about 4 seconds.
This did not happen the previous time I used X4 with the same camcorder and on the same PC, how to correct it.
View 9 Replies
View Related
Sep 19, 2012
I just downloaded the VideoStudio X5 Trial, and want to crop a 10-minute video of my baby to the minute she's singing. Her grandparents would love it.
I noticed that when I imported the video into the timeline, the audio was about 0.75s ahead of the video, when in "Project" mode. In "Clip" mode it looked/sounded fine. When I render the video, it also has the same sync problem as in "Project" mode.
Here are the details of the video:
Video type: H.264 Baseline Profile Video
Total frames: 18,430
Attributes: 24 bits, 1280 x 720
Frame rate: 29.908 frames/sec
Data rate: 11965 Kbps
Audio type: MPEG AAC Audio
Total samples: 29,736,960
Attributes: 48000Hz, 16 bit, stereo
Bit rate: 96 Kbps
View 8 Replies
View Related
Aug 2, 2011
I have been trying to capture both Video and Audio in Video Studio Pro X4. I have a program called Diamond One-Touch Video Capture V500 that uses a USB connection for the Video and Stereo output from my Sony Handycam Digital 8 Model DCR-TRV740. The one touch software works well to capture both the Video and Audio, however, I was hoping when I purchased the Corel Video Studio Pro X4, that I would be able to record both video and audio with the capture feature, since V500 Video shows under sources in the capture screen.why the Video Studio will not record the audio while the One Touch Video program will?
View 5 Replies
View Related
Apr 2, 2011
Any way to link audio and video together to if you move one they both move?
View 8 Replies
View Related
Oct 31, 2011
I am using Corel Video Studio Pro V4. I am exporting as the following:
- MP4
- 30FPS
- 1280 x 720
- Frame Based
- H.624 MAIN
- 5000 kbps
- AAC
- 44100 Hz
- 256 kbps
- Video is about 25min long
At different parts in the video, the audio begins to be off.
View 14 Replies
View Related
Jan 11, 2012
im trying to capture in VS x4 but i only get audio. no video is coming up on my capture screen but if i record, the recording will show video... video just wont show up in the capture screen inside VS x4.. i read where people couldnt see video if they were trying to capture DV and some were told to get windv or someother program to get the video but im not trying to capture dv.. im trying to capture video with my tv capture card, avertv hybrid volar max.. it captures the audio thru the vd x4 capture screen but not the video although if i do a recording both audio and video will play in the mpg.. why cant i see the video in the capture screen?
View 2 Replies
View Related
