VideoStudio :: Split Video Post-processing
Feb 13, 2013
I often work in big files, such as 200 GB size files that usually contains 4-5 hours of recording. I make web series and require my videos to by like 15-20 minutes long. So far I've been taking these huge files, cropping them down to length and then waiting the compress, however this is a very bad method and very time consuming, because after I crop a video that fits the 15-20 minutes limit, I have to wait for it to compress completely before I can continue to work on the next one, which basically means, that even though it takes like 5-10 minutes to edit a video it takes more like an hour per episode because I need to stop and wait before I can work on the next episode.
Is there a way to queue up a ton of pre-edited projects and then make it all compress to seperate video files during the night or something? It would really save me a lot of effort.
View 2 Replies
ADVERTISEMENT
May 15, 2011
I try to render an environment Map with video post processing. But i cant get it to work. The background (here created with an nebula script) is just white after rendering, the standard render works. Look at the screenshot, i think it will explain my problem better then my poor English vocabulary is capable.
View 2 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Mar 27, 2011
I have added a video file to my timeline and then chosen share dvd. I then added chapters and chose a menu (tried several) and then selected Burn to folder and normalize audio but just NOTHING happens after 3% (which appears immediately) have tried different videos and menus - none get processed. The CPU runs at 100% BTW I am processing thi on my laptop Win 7 (32 bit) Toshiba with 3 GB RAM and a IGB GPU so do not go by my profile
I have a previous version of VS and that works just fine. yes I uninstalled theat entirely and then decided to try VS 14
View 1 Replies
View Related
Nov 3, 2010
I captured approximately 1 hour DV file contained different scenes from different places. Now, I would like split this file for smaller parts and save them as a separate .avi files.
Is this possible to do this by VSX3 (e.g. cut or multitrim on timeline and save to separate folder each pieces?
If X3 cannot do this, what software you can recommend for relatively easy and quick multi-split, without loose quality?
View 5 Replies
View Related
Jul 30, 2011
Because the inbuilt MPEG encoder lack descent contrast Im thinking of using another video/audio encoder. I then have a question about the audio. If I separate the audio from the video in the project, is the 5.1 information preserved in the wav file?
View 2 Replies
View Related
Dec 11, 2011
I have been using Corel VideoStudio Pro X4 recently. I split a number of video files on a daily basis. This is what I do:
I take an Avi file that has a duration of about 30 minutes. I drag and drop the video into the "video track" area in the program.
Then I use the little "slider" thing and drag it to 15 minutes and click on the "scissors" symbol. which results in making the video split into 2 parts.
I delete the first part on the "video track" are and then I click on "share"-->"create video file"-->"custom"-->I choose Avi .
The compression I choose is Xvid Mpeg-4, 24 Bit RGB, and the Audio Format is Mpeg Layer 3, 8 Bits, 11.025 Hz Mono
The resulting video does not have any sound . This does not happen if I delete the 2nd part and create the video file with the first 15 minutes only. This happens with almost all of my videos (all of them are avi).
View 3 Replies
View Related
Dec 22, 2012
Any online resources on Infrared Photography Post processing in GIMP ?
View 1 Replies
View Related
Apr 22, 2013
Is there a way to send this individual lower resolution images so he can work on them and then have him send me the metadata from his edits, so I can apply them to the images I have on my system? The reason for this question is because I'd like to minimize the size of the images I'm sending to the editor, but still be able to produce high resolution stills.
I understand there is a way to work with RAW images and save the metadata, but that doesn't fix the file size issue, and you can only save certain aspects like white balance, levels, etc... I really need a way to capture his history and save that to a file, that way if he were to use a certain filter, or brush on the image, the same results would be applied to my images.
View 3 Replies
View Related
Sep 30, 2012
We use Trimble data collection software. We typically import a "rw5" file converted from the "job" file. We then convert the "rw5" file to a "fbk" file. The conversion process has some bugs in it..
We have found two problems (thus far!):
1) The backsite data, for a station set-up, gives back an error when we reduce the data into the survey network. It also tweaks the coordinates for the set-up point. We have fixed the error by noting this line of data in the "fbk" file.
2) When the field doubles angles (wrapping, turning, etc.) C3D use only the first angle turned and not the mean or averaged angle.
We have found that if Trimble Geomatics Office (TGO) is used in post-processing, the "fbk" file generated works on both counts. FYI, the Trimble ribbon does exactly the same thing as C3D when a "job" file is imported, i.e. does not work properly.
View 1 Replies
View Related
Feb 28, 2014
Today somehow the setting on my camera had raw file saving turned off. To try to minimize loss from post processing of the jpegs I assume I should save the edited files as PSD and develop my final pictures from that?
View 1 Replies
View Related
Mar 23, 2011
I'm relatively new when it comes to 3D applications.Basically, I have created a scene of the Earth from space, and have managed to create a relatively good looking still image.
However, for my project I need a full 3D environment map, and so far I have been unable to produce this with the environment map option in the rendering tab. Basically when moving the camera, the background stays exactly the same, but I want the background image to pan aswell - having a fixed image makes no sense when panning around a 3D scene if I'm being clear :/
I tried to use video post, but every time I try to execute the render Max hangs on "Transforming Vertices". It does this on full scenes and totally blank scenes, but so far has only done it when rendering a camera view, not perspective. The only way out of Max is to close it from the task manager when this happens. I searched all day yesterday for a solution to this, but the only thing I could find was to alter the bitmap pager, which 2011 doesn't allow customization of.
So after I gave up on Video Post ever working, I rendered the inside of a tube with a star map. I have problems with the texture looking right when I do this however, it looks stretched, blurred, and the joins between faces are very apparent.how to make an environment map fully wrap around the scene, and pan with the camera.
View 8 Replies
View Related
Apr 1, 2011
I am trying to use the lens effect flare to simulate the sun in a space scene. I have the camera view active and set to a frame where the sun is visible. In video post I set the sun as the node source and I hit VP Queue and preview but the effect is not rendering.
View 1 Replies
View Related
Feb 14, 2013
Video Post to Backburner network render hangs on next frame..I use Max’s Video Post to setup my render sequences to submit them to backburner. There are a couple issues with video post but not as bad as the one I have now. Each time I setup a render and submit it to backburner the first frame assigned to each system will render fine but then the servers get hung-up “waiting for frame” and consume ALL of the available RAM. Of course if I don’t do network render, the video post runs without a hitch. That of course defeats the purpose of having a render farm that video post SHOULD be able to use. And also, if I go through the ‘render’ dialog box, and do network rendering, I can get each series of frames done as well but it’s not as clean and orderly as with video post.
Oddly enough, in Max 2009, all of this worked just fine. Ever since they (autodesk) fixed (broke) backburner in 2012 video post has never been the same. Since I am a lowly low budget animator, video post was a bonus in 2009 for having everything in one bundle for mixing and matching multiple views and inputs with overlays for production. It was great! One could set it and forget it overnight and in the AM all that was left was compile the images to sequenced avi. Alas, that has been somewhat limited now in that you can only render the views that are active, so max of 4 views or cameras (if this has changed for others pls let me know). Annoying especially if you forget to have a single camera active and set the render and it then hangs on it… no visual error saying such and such is missing just dumb blank screen (sometimes).
Another oddity, after saving a video post layout, if I open that file on a secondary system for edits, the video post will have blanks for file outputs. I’ll then have to re-point the outputs to be able to use the limited video post functionality. A pain and can deal with it but still, the outputs are all on networked drives (all mapped to same drive letter etc) and ever if I direct it straight through the network they go blank; i.e. \serversharediretoryoutputs
I’m attaching a simple ‘teapot race’ max file that exhibits the same problem of the video post on render fails just in case it’s a file setup issue.Also find below the log file outputs of a system during the aforementioned hanging render sequence. , I was running the debug and the log shows max hanging on the ‘waiting for frame’ then eventually dumps the job, reloads, does 1 frame, then hangs again for 10-15mins.
View 7 Replies
View Related
Mar 6, 2011
I was recently trying to RECONNECT some files on my catalogs when I noticed I couldn't reconnect a couple of video files. The files were .WMV and when I looked at the thumbnail, I noticed that there where two thumbnails "stacked" with the same file name, but different lenghts of time. I found the original video file using explorer and noticed that the original file is as long as the two "thumbnails" put together. Now, it won't reconnect the thumbnails to the video file. Why did it "split" the video file in the first place? How could I reconnect it?
View 3 Replies
View Related
Sep 12, 2013
When dragging and dropping a video from Photoshop to Premiere to burn a DVD, one of the videos is split into several sections. How can I restore the video to one complete item?
View 5 Replies
View Related
May 27, 2012
Is there a way to disable lightroom 4 from importing or processing any file with a video extension mkv, 3gpp etc, as its really slowing down my workflow.
My typically workflow consists of pulling my files off of my memory carsd manually via explorer (into a specific folder under a root folder which I create manually). I then synchronise the root folder in lightroom.
Unfortunately LR4 seems to take over and hour to do this since I have a lot of uncateloged videos. LR fails each time to catalog the videos.
LR3, since it didn't support video, was blazingly fast and performing the same operations in LR3 takes minutes as oppose to hours.
View 2 Replies
View Related
Mar 10, 2014
Is there a way to split a really long video into 10 minute chunks during export? I know I can do this post export with other software, but I would've thought it could be doable straight in Premiere Pro (using CC).
View 5 Replies
View Related
May 28, 2013
I have been using VS for quite some time, along with my Panasonic GS500. When capturing my video, VS would create a file for every start /stop of the video. I shoot high school football. This is extremely convenient for cataloging plays, because each play is its own file. I know that "Split by Scene" is available, but it does not create a file for each play.I recently purchased a Canon XH-A1s and wanted to move to HD. will the new Canon camera and VS Pro X4 provide for the same type of capture, when optioned for HD.
View 4 Replies
View Related
Oct 14, 2012
I am using VS Pro X4 on a Windows XP Pro PC. When I 'capture' video from by vidcam (DV tapes) using 'split by scene' all the resulting clips all contain the first frame of the following clip.
I had this problem a year ago using my laptop on a VIsta Business platform and though that perhaps the 'problem' had something to do with Vista (well Vista isn't everyone's ideal platform) but now I am experiencing it on an XP PC so I am thinking that it is caused by VS Pro X4.
Is there a fix for this and/or a setting to stop this annoying problem. I am thinking that if No then I should reinstall VS 9, which I never had this problem with, just to allow me to capture video by scene correctly.
View 6 Replies
View Related
Nov 4, 2010
Using VS Pro X3. Is there a way to split by time (vs. by scene/content)?
View 7 Replies
View Related
Aug 4, 2013
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
View 5 Replies
View Related
Dec 7, 2011
why my Corel VideoStudio ProX4 program is having a hard time to run AVCHD MTS files.Seems like they are slowing my computer to a crawl.Causing the program to quite. My computer is a quad core, 3.00 GHz 4g's of ram.Lots of hard drive space.I don't understand it.
View 13 Replies
View Related
Oct 28, 2013
After spiting the audio form a DVD in X5, I want to make a CD of the audio (narration) .What is the best way to do ?
View 5 Replies
View Related
Dec 31, 2010
I have used my Video Studio Pro X3 to creat a few videos. When I now try to creat a video the split by scene buttion is greyed out. I dont think I have done anything with the settings on my Camera a Sony HDR CX7EK. I record in standard definition and the file created has an extension .mpg with 720x576, 25 frames per second. The only difference this time around is that I took the memory card from the camera and transfered it to the computer with a reader instead of using the sony transfer and charging docking station. Strange is that I can also not split by second when using old projects where I could split scnenes some 6 months ago.
I also did read in a few other posts the button is greyed out if you record in analog cameras, which is understandable, but to my dissmay it seems like splitting by scene does not work on HD recorded files, is that true as i have used the HD function in the camera and created AVCHD files with file extension .MTS and plan to creat a few movies later on?
View 2 Replies
View Related
Nov 27, 2012
I'm using Corel Video Studio Pro x4 to make a promotional video for an upcoming event, and I used the split audio function to, surprise, separate the audio. Here's the problem: It has no sound. When I play it as a clip, it works fine. But if I play the project as a whole or add any kind of filter to it, it is mute. I've tried saving the project and opening it in a media player, still nothing. My music track and video track play fine, but the split audio does not.
View 7 Replies
View Related
Nov 5, 2010
I have my editing all done for a 2 hour 12 minute video. It has been my experience that I can get about 1hr 7min. on a DVD. Normally when i'm done editing, I choose Share > Create Video File > DVD. This creates a DVD compatable mpeg-2 file for burning later. I know I want to create 2 seperate DVD's. How do I split the video? Is it possble to slpit in the editing phase? I'm using VS pro 12.
View 3 Replies
View Related
Jul 15, 2013
Is it possible to undo the Split Audio function once you have used it?
View 2 Replies
View Related
Jun 24, 2012
when producing quiet long films (e.g. 2 hours), is it better to split it into e.g 3 individual projects, or is it better to work on it as one?This, because I want to avoid the loss of data or already produced sequences, if one project is getting to big.
View 3 Replies
View Related
May 14, 2012
I've edited with VideoStudio 7, 10, 11, X2, X3 and X4 and just switched to X5. An issue that I experienced (and resolved) early in my use of VS Pro X4 has now resurfaced with VS Pro X5 and I can't recall how I "fixed" the issue last time.
My main video track is in its usual spot on the top row of the timeline (in Timeline View). Ripple editing is enabled. When I use the scissors to manually split the main track at any point, an audio fade-in is automatically applied to the trailing clip after the split. At the same time, the audio levels on both the leading and the trailing clip (before and after the split point) are instantly reset to 0 db. This is particularly maddening when I've carefully re-adjusted my main track's audio levels before applying the split.
View 7 Replies
View Related
Oct 10, 2011
I have recently captured video (6 tapes each tape to a separate folder on disk and 'folder' within VS) from my VidCam (DV tape) and selected 'split by scene'. I was using VS9 as at the time I was having problems using Pro X4.
Every clip/scene captured for the first tape I captured to disk includes the first frame from the following clip. This only seems to have affected the first tape I captured.I will have to cut the last frame from each clip if I rearrange the order of the clips on the timeline.
View 2 Replies
View Related
