I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedI have been using VS for quite some time, along with my Panasonic GS500. When capturing my video, VS would create a file for every start /stop of the video. I shoot high school football. This is extremely convenient for cataloging plays, because each play is its own file. I know that "Split by Scene" is available, but it does not create a file for each play.I recently purchased a Canon XH-A1s and wanted to move to HD. will the new Canon camera and VS Pro X4 provide for the same type of capture, when optioned for HD.
View 4 Replies View RelatedI am using VS Pro X4 on a Windows XP Pro PC. When I 'capture' video from by vidcam (DV tapes) using 'split by scene' all the resulting clips all contain the first frame of the following clip.
I had this problem a year ago using my laptop on a VIsta Business platform and though that perhaps the 'problem' had something to do with Vista (well Vista isn't everyone's ideal platform) but now I am experiencing it on an XP PC so I am thinking that it is caused by VS Pro X4.
Is there a fix for this and/or a setting to stop this annoying problem. I am thinking that if No then I should reinstall VS 9, which I never had this problem with, just to allow me to capture video by scene correctly.
Using VS Pro X3. Is there a way to split by time (vs. by scene/content)?
View 7 Replies View RelatedAfter spiting the audio form a DVD in X5, I want to make a CD of the audio (narration) .What is the best way to do ?
View 5 Replies View RelatedI have used my Video Studio Pro X3 to creat a few videos. When I now try to creat a video the split by scene buttion is greyed out. I dont think I have done anything with the settings on my Camera a Sony HDR CX7EK. I record in standard definition and the file created has an extension .mpg with 720x576, 25 frames per second. The only difference this time around is that I took the memory card from the camera and transfered it to the computer with a reader instead of using the sony transfer and charging docking station. Strange is that I can also not split by second when using old projects where I could split scnenes some 6 months ago.
I also did read in a few other posts the button is greyed out if you record in analog cameras, which is understandable, but to my dissmay it seems like splitting by scene does not work on HD recorded files, is that true as i have used the HD function in the camera and created AVCHD files with file extension .MTS and plan to creat a few movies later on?
I'm using Corel Video Studio Pro x4 to make a promotional video for an upcoming event, and I used the split audio function to, surprise, separate the audio. Here's the problem: It has no sound. When I play it as a clip, it works fine. But if I play the project as a whole or add any kind of filter to it, it is mute. I've tried saving the project and opening it in a media player, still nothing. My music track and video track play fine, but the split audio does not.
View 7 Replies View RelatedI have my editing all done for a 2 hour 12 minute video. It has been my experience that I can get about 1hr 7min. on a DVD. Normally when i'm done editing, I choose Share > Create Video File > DVD. This creates a DVD compatable mpeg-2 file for burning later. I know I want to create 2 seperate DVD's. How do I split the video? Is it possble to slpit in the editing phase? I'm using VS pro 12.
View 3 Replies View RelatedI captured approximately 1 hour DV file contained different scenes from different places. Now, I would like split this file for smaller parts and save them as a separate .avi files.
Is this possible to do this by VSX3 (e.g. cut or multitrim on timeline and save to separate folder each pieces?
If X3 cannot do this, what software you can recommend for relatively easy and quick multi-split, without loose quality?
Is it possible to undo the Split Audio function once you have used it?
View 2 Replies View RelatedI often work in big files, such as 200 GB size files that usually contains 4-5 hours of recording. I make web series and require my videos to by like 15-20 minutes long. So far I've been taking these huge files, cropping them down to length and then waiting the compress, however this is a very bad method and very time consuming, because after I crop a video that fits the 15-20 minutes limit, I have to wait for it to compress completely before I can continue to work on the next one, which basically means, that even though it takes like 5-10 minutes to edit a video it takes more like an hour per episode because I need to stop and wait before I can work on the next episode.
Is there a way to queue up a ton of pre-edited projects and then make it all compress to seperate video files during the night or something? It would really save me a lot of effort.
Because the inbuilt MPEG encoder lack descent contrast Im thinking of using another video/audio encoder. I then have a question about the audio. If I separate the audio from the video in the project, is the 5.1 information preserved in the wav file?
View 2 Replies View Relatedwhen producing quiet long films (e.g. 2 hours), is it better to split it into e.g 3 individual projects, or is it better to work on it as one?This, because I want to avoid the loss of data or already produced sequences, if one project is getting to big.
View 3 Replies View RelatedI've edited with VideoStudio 7, 10, 11, X2, X3 and X4 and just switched to X5. An issue that I experienced (and resolved) early in my use of VS Pro X4 has now resurfaced with VS Pro X5 and I can't recall how I "fixed" the issue last time.
My main video track is in its usual spot on the top row of the timeline (in Timeline View). Ripple editing is enabled. When I use the scissors to manually split the main track at any point, an audio fade-in is automatically applied to the trailing clip after the split. At the same time, the audio levels on both the leading and the trailing clip (before and after the split point) are instantly reset to 0 db. This is particularly maddening when I've carefully re-adjusted my main track's audio levels before applying the split.
I have recently captured video (6 tapes each tape to a separate folder on disk and 'folder' within VS) from my VidCam (DV tape) and selected 'split by scene'. I was using VS9 as at the time I was having problems using Pro X4.
Every clip/scene captured for the first tape I captured to disk includes the first frame from the following clip. This only seems to have affected the first tape I captured.I will have to cut the last frame from each clip if I rearrange the order of the clips on the timeline.
I was looking for a simple piece of software to do basic but frame-precise clip editing like trimming and I learned about Corel VS. (Well, I was looking for a tool to work with less common formats like flv, f4v but...)
Anyway, I stumbled upon this message that reads like: "the current operation can't be completed because the current clip's duration is less than 3 seconds". I tried both in easy and advanced edit but I simply can't trim a clip.
I have a project with dozens of clips. Is there any way to mute or split audio for all or multiple clips rather than doing it for one clip at a time?
View 2 Replies View RelatedI have been using Corel VideoStudio Pro X4 recently. I split a number of video files on a daily basis. This is what I do:
I take an Avi file that has a duration of about 30 minutes. I drag and drop the video into the "video track" area in the program.
Then I use the little "slider" thing and drag it to 15 minutes and click on the "scissors" symbol. which results in making the video split into 2 parts.
I delete the first part on the "video track" are and then I click on "share"-->"create video file"-->"custom"-->I choose Avi .
The compression I choose is Xvid Mpeg-4, 24 Bit RGB, and the Audio Format is Mpeg Layer 3, 8 Bits, 11.025 Hz Mono
The resulting video does not have any sound . This does not happen if I delete the 2nd part and create the video file with the first 15 minutes only. This happens with almost all of my videos (all of them are avi).
I made all my polygons with the same technique but somehow interactive polygon split tool does not split all polygons... I attached a file with which I have problem. Split tool just "disappears" after submitting changes...
View 1 Replies View RelatedI just downloaded the videostudio X6 trial version. For some reasons, some sequences from mpg clips I added to my project seems to be repeating itself for no reason. The bug occurs within a unique sequence and might change the "restart" position while the timeline cursor.
Ex: Original video = Cow cross the road, a car hit the cow then the car explode and finaly a generic
After importing the original video = Cow cross the road, a car hit the cow then the car explode, then the car hit the cow a second time
If I move the cursor right to left a couple of time, it might end up missing the first part of the clip where the cow is suppose to cross the road (replaced by a second car exploding)
It's a single clip and the final display is changing even if I don'T touch anything. I use to be a Ulead video studio user and I never had such problem.
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies View RelatedHow can I make a white colour clip the same shade as the white vignette filter.I want to place overlayed images with a vignette onto a white clip on the main video track so that they blend seemlessly in X5.
View 12 Replies View Relatedcertainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
I've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
How to rotate a clip through 90deg?
View 5 Replies View RelatedHow do I delete both the thumbnail and the clip from my computer ? The Delete in the library only deletes the Thumbnail.
I want to clear the unusable files from my computer.
How can I add multiple titles to the same clip, but enter the clip at different times ..?
I am trying to add a title by having "____ production presents..." (fades out) (fades in) "Title of Movie"
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies View RelatedI am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
