VideoStudio :: X4 - AVCHD Splitting Frames On Each Clip?
Nov 30, 2011
I have a very unusual problem and I can't work it out. I have 1920x1080 clips in AVCHD format taken from my Full HD Digital movie Camera. It's a cheapy - Kogan! When I place all the clips together in Studio Pro 4 and render the video outpout or even preview in the clip window I get the frames splitting above and below the frame. The clips play fine in all players and as you can see in the second attachment is the Pro preview player compared to Media classic which renders the clip correctly.
You can see the top and bottom of the frame is duplicated on every transition or start of next clip
View 3 Replies
ADVERTISEMENT
May 14, 2013
I am trying to split an avi file in the timeline. I split the clip at the required entry point (using the scissors). The 1st part is then marked with a yellow bar. As soon as I move the slider along to get to part where I want to split the clip again (the exit point) - the clip goes black and I can't see it. I if I click on "clip" the clip reappears - but if I click on "project" the section I am trying to cut out goes black again.
View 2 Replies
View Related
Jul 28, 2013
I'm editing MTS files/AVCHD. Footage filmed with a panasonic cam, using Pro 6, when I hit share tab - create video file - I have many choices but I would like to save it as high format as the original, so do I hit , (Same as First Video Clip) or (AVCHD) both are nearly the same I'm guessing, I've saved in both formats and both ended up been the same size. What one I should save to ? I have added the properties of the original file.
View 14 Replies
View Related
May 28, 2011
I'm trying to match the project settings to an imported HD video clip (1920x1080 *.mts).I've been using videoStudio for years but only in 720x480 SD. I just got a Panasonic HDC-SDT750PP HD camera and want to make sure the video output file makes the most out of both camera and X3 but in project settings it only allows 720x480.
Does the project setting have any affect on the final video file?The properties of the video file says 1920x1080 24b H264 yet the source file extension is *.mts
My intention is to create a HD video file that I burn to a Hybrid DVD until I get a Blu-ray burner but what format to save the file in if the X3 project setting only goes to 720x480.
View 2 Replies
View Related
Aug 28, 2010
Trying to take a chunk of frames out of the middle of a clip. The manual says:
"The Navigation Panel is used to preview and edit the clips used in your project. Use the Navigation Controls to move around a selected clip or your project. Use the Trim Markers and Scrubber to edit your clips."
I have done that. Trim Markers set to start and end of frames to be removed. So what is next? Where is the magic button that removes the unwanted frames? Have tried Delete but nothing apparently changes.
While I am at it, how do the scissors work? Can click on them at the start of a series of frames but they become greyed out after that.
Have done a lot of stuff in Windows Movie Maker, which was much more straightforward, but unfortunately it can't cope with HD. VSX3 manual is good at giving you various different ways of selecting frames for deletion, but seems to miss out on the punch line: "now do this to delete them".
View 11 Replies
View Related
May 24, 2013
can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies
View Related
Jan 31, 2013
If there is still an option somewhere where I can force my import to be frames and set duration to 5 or 10 frames like in 2012. or force a set of sequences o be imported as one clip.
Update: Found the frames option but no frame durations available. But no single clip available in case of importing multiple sequences or frames that need to be in a single sequence.
Currently dancing between Flame Premium 2013x2sp3/2013Sp4 nd Smoke on mac 2013Ext1
View 2 Replies
View Related
Sep 29, 2012
I wanted to split a clip, but I've split a project (after 4 minutes). Now, when I want to insert an audio file, it stops playing after 4 minutes although it's much longer. Every new project is also split and I cannot insert music. It stops playing after 4 minutes. I have found the explanations about splitting the clip, but nothing about the splitting the whole project. How can I make my new projects "entire" and insert the full-lenght audio?
View 9 Replies
View Related
Dec 28, 2012
I decided to make the jump from X3 to X5 ultimate to give Corel a try again, actually the deciding factor for me was the included mercalli stabilization as it seems to be pretty good.
Anyway, I created about a 10 minute movie from a few videos, which is divided into many clips. Now I want to disable the audio from the video track and add a sound track. I found a nice sound track with the included auto music, but I can't figure out a way to mute the entire audio track from the video so I only hear the added music. I can only see how to do it one clip at a time. Is there a way to do all the clips at once?
I guess in hindsight I should have muted the audio from the video before splitting them into clips, but I've been used to using Vegas which allows you to mute the audio from the entire video track and thought I could do it later with X5.
Am I stuck with doing one clip at a time? Or do I have to save the movie then bring it in as one large clip then mute the audio from the video so I can replace it with a music track? the mercalli seems to work pretty good - which version it is they bundle with X5?
View 2 Replies
View Related
Oct 11, 2011
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies
View Related
Jul 29, 2011
If I have a 10 frames long clip and a 20 frames long clip for compositing, and with those clips, I wanna set the 10 frames long clip moved 5 frames in Action, How can I do it without Slip and Transparency options? I tried to find the way from Animation tap, but I could not.
View 3 Replies
View Related
Aug 12, 2011
I searched through all the key short cuts, looked through the user guide and I'm at a loss where you can nudge a clip back and forth by single frames. I saw you can hold 'D" and SLIP the clips one frame at a time, but not move them outright.
So, since nudging is one of the absolute most basic requirements of any editor, I know it's in there. But alas, they hid it too well. here it might be?
Maybe hiding next to a trim mode I don't see where I can see how my slips and slides affect the area around the clip?
View 2 Replies
View Related
Nov 21, 2012
I have done some interviews using a Nikon D90 (only thing at hand; build in microphone and bad audio). Now I need to clean the sound and focus on human voice – and hope the Audio Filter in VS will do the job.
If I split audio to apply filters, can I then continue to edit my project just as before – or will I break things when adding new clips, photos, titles etc.?
View 13 Replies
View Related
Nov 6, 2012
I've a professional Panasonic camera capable of 720p and 1080p AVCHD recording both at 50 or 25 frames per sec (PAL). My recent clips are AVCHD h.264 50fps @ 24000-26000kbps. I usually render the file to film first, then create a disc after. I use VSP x5
For a short edited film (less than 5gb), I'm happy to make an AVCHD full-HD disc and enjoy a seamless and lossless transfer from project to a standard disc. The picture quality seems true to the original recording.
Q1) For longer films where I need to use a Blu Ray, what exactly is the best route to take and what boxes should be (or not) checked?? I did create a Blu Ray disc using the largest output 35000kbps max and I thought afterwards the footage looked a bit "contrasty" and second hand.
Q2) I've read in the forums that 50fps for 1080p Blu Ray is not available yet (hence the conversion to 25fps). Is it available at 720P and what/where are the settings?
Q3) If I know before filming that I'll be needing a Blu Ray, is it advisable to shoot the original at 25fps to avoid deterioration at render stage?
Q4) For downsizing to 720x576 Standard Definition discs, do I need smart render on? Two pass encode? for best quality?
Bottom line = I want to avoid my footage being unnecassarily hauled through rendering hoops and the final AVCHD or Blu Ray to be as best it can.
View 14 Replies
View Related
Jun 12, 2012
VS X5 Pro wont render clips totalling more than 6 plus minutes......Gives me one of these 2 errors >frame 724 unreadable, frame 1024
unreadable. I click on OK and poof! everything is gone!!
View 12 Replies
View Related
May 29, 2012
whether Video Studio could handle the video file format from a high end Panasonic prosumer camcorder. It seems the question I should have asked is whether Video Studio X5 can edit and export files in the new AVCHD 2.0 format, which is used not only by Panasonic but by other camcorder manufacturers and which, according to an email from a reviewer for camcorderinfo.com is not compatible with a large number of video editing software programs. Can X5 handle AVCHD 2.0?
View 9 Replies
View Related
Nov 10, 2010
I need to convert AVCHD footage to 1280x720 MOV (qt) files. VSX2 via create a video file, and VSX3 can do this via video file creation and batch conversion as well. The problemis that I can't find any setting to get the bitrate of the MOV files under contol. VSX2 generates files with very high bitrates, VSX3 with low bitrate, and when I select "check data rate" in the advanced options settings for the MOV file, I get a prompt at every new file start (and I have many files) like " the bitrate exeeds the settings...do you want to continiue" .
View 10 Replies
View Related
Mar 15, 2013
I have VideoStudio X5.I have saved my completed video as a video .m2t file and as an AVCHD file neither of which will replay on the computer if I click on the file folder. If I copy them to a USB stick they don't replay on the HD tv either. Both play as discs on my laptop quite happily but how do I transfer them as videos to a USB
View 14 Replies
View Related
Jun 8, 2011
I used a video light in lower light conditions to take an HD video (in AVCHD) which will be rendered to PAL SD DVD. Unfortunately the main speaker has red eye. Can my VSP x3 remove this?
View 2 Replies
View Related
Feb 18, 2011
have a newly acquired Canon HF S21 video camera that captures footage in AVCHD. I plan on using Corel for capture and edit.
My question is for other AVCHD users. Do you use any tools to convert the files to .avi? And then edit those in VS X3 in order to aid the rendering process?
Someone refered me to Cineform Neoscene. It is a bit pricey, but here it is: [URL]
Is AVCHD really a problem in VS x3? If I convert to .avi, will I be able to render to a BD DVD later on and still retain the HD image as good as that on the original AVCHD footage?
View 12 Replies
View Related
Jul 25, 2011
where to get more AVCHD disc menu templates than the 8 that come with it? I was wondering if the demo of DVD MovieFactory 7 has more and if I installed the demo if I could copy the templates over to VSX4.
View 6 Replies
View Related
Dec 7, 2011
why my Corel VideoStudio ProX4 program is having a hard time to run AVCHD MTS files.Seems like they are slowing my computer to a crawl.Causing the program to quite. My computer is a quad core, 3.00 GHz 4g's of ram.Lots of hard drive space.I don't understand it.
View 13 Replies
View Related
Jul 24, 2011
To remind me when the video was taken, I'd like to have a timecode / timestamp overlaid on the video.
Per the VS X4 User Guide: To enable timecode retrieval for AVCHD
1. In the Capture Step Options Panel, click Import from Digital Media.
2. Select the thumbnail of the video file. Click Start import to launch Import Settings.
3. In Import Destination, select Insert to Timeline or select Add video date information as title.
4. Choose Entire video to import the timecode of video file to appear as a title spanning the entire duration of the video. Choose Duration to import the timecode as a title within a specified duration. Click OK to apply the settings.
View 8 Replies
View Related
Apr 7, 2009
solving the problem of brief "blips" or "jerks" following transitions in video generated by VS X2 from AVCHD clips.
Last November, I reported to Corel the problem of brief "jerks" or "blips" in AVCHD video files or hybrid discs generated by VS Pro X2 from clips created by my Sony SR11. There was a long thread here in which several Canon users stated that they had the same problem. [URL]
In addition to transitions, I also get the same blips in the video at the end of titles placed over the top of video. I am not sure whether Canon users have that problem.
Since the problem still has not been fixed, I followed up last week with Corel asking for the status of the fix for this problem. In their reply, they asked for more sample clips and asked that I post their ftp site URL where you can upload clips that will demonstrate the problem. They want clips from the various AVCHD camcorder models which are having this problem. They didn't say whether they want raw clips or VS-generated clips that contain the blip, but I suspect they want raw clips so they can try to re-create the problem on their systems.
When selecting a clip to upload, what appears to cause the problem is that at the end of a transition or title, the video jumps back one frame and then proceeds forward again. Thus two frames are repeated, which causes the "blip". You can see this by viewing the generated file frame-by-frame.
So the blip is most apparent when there is obvious, but smooth, movement in the original clip. The raw clip I sent them when I reported the problem in November was of a truck driving down a highway, moving across the screen from left to right, and was shot on a tripod to eliminate any camcorder movement. In the VS-generated video, at the end of the transition, the truck jumped backwards slightly then went forward again.
A clip containing little or no movement, or a clip that is already jerky and unsteady, will not illustrate the problem well. So please select your clip accordingly. A single object moving across the screen against a non-moving background would be ideal.
Following is the ftp site where you can upload clips.
[URL]
View 14 Replies
View Related
Jan 3, 2012
VS Pro X4 - I do not consider myself an expert with video editing/authoring, but I do have a fair amount of experience with capturing/editing/authoring h.264 files via a Hauppauge 1212 HD-PVR, ArcSoft Total Media Extreme, and VideoReDo. In fact, I have burned around 5,000 DVD and 2,000 AVCHD discs with outstanding results using those products, as well as editing and storing thousands more captured programs directly to HDD. Unfortunately, these products do not allow me to create Blu-ray discs, so that is why I am trying to switch over to VS X4.
My baseline for what I want from VS X4 is simply what I have been able to do with no effort at all using ArcSoft Total Media Extreme (supplied with the HD-PVR): I capture HD programing at 1280x720p 60fps using a variable bit rate (usually 7 Mbps) and AC3 audio, edit out unwanted material, add menu and chapters, then burn directly to an AVCHD disc. Using this method, I generally get a minimum of 3 hours HD material on a standard DVD5 blank, and total authoring/burning time for a disc is somewhere around 20 minutes.
My problem is that I have not been able to come anywhere close to this efficiency yet with VS X4. The .ts source files play and edit in VS X4 just fine, but then I hit a wall when I try to produce the output. There don't seem to be any default project profiles to create AVCHD 1280x720p, and even when I try to use Customize, i cannot access the needed fields, such as user defined frame size. And everything I have tried produces HUGE output files, 4 or 5 times larger than the source files!
Sample Source file MediaInfo:
ID : 0 (0x0)
Complete name : C:UsersPublicVideosInput for Edit or ResizeHoliday for Lovers 720p_7.1v.TS
Format : MPEG-TS
File size : 2.30 GiB
Duration : 1h 43mn
Overall bit rate mode : Variable
Overall bit rate : 3 166 Kbps
Maximum Overall bit rate : 18.0 Mbps
[Code] ...
View 2 Replies
View Related
Aug 22, 2012
Earlier this year I purchased a Panasonic HDC-DS800 high definition camcorder. After years of editing ATI files, I'm going to use my VideoStudio (X4) to edit AVCHD files.
To get the files from the camcorder to the computer, there are 2 options. One is to go directly to the SD card on the camcorder through the My Computer option. This gives me .MTS files, which I can transfer to my hard drive.
The other option is to use the software supplied with the camcorder, which is HD Writer AE 3.0. This transfers to my hard drive .m2ts files. Along with the .m2ts files, it also transfers (or creates) .tmb files, .pmpd files, and .cont files.
View 8 Replies
View Related
Apr 24, 2011
Does the AVCHD standard allow for thumbnails, so that when a disc is authored and then inserted into, say a PS3, it will show a thumbnail like a BluRay does?
View 1 Replies
View Related
Aug 23, 2012
When I select Settings>Project Properties, I only have two options: MPEG (SD MPEG2) and AVI. How do I set project properties to high definition such as AVCHD?
View 4 Replies
View Related
Jun 14, 2012
I just moved from a Sony HDV (HDR-HC3) camcorder to a Panasonic AVCHD one (HC V700). When rendering my final video, I've always used MPEG-4 HD. This new camcorder records in AVCHD. I'm not sure if I should be outputting to MPEG-4 HD or AVCHD. Before I had issues rendering in AVCHD, which is why I didn't use it.
What's the main differences in MPEG-4 HD vs. AVCHD? What are the advantages and disadvantages? Which one is better and the one I should use?
View 6 Replies
View Related
Feb 2, 2011
I am using VS2 and have been working on creating a "hybrid DVD" AVCHD video. I have a Canon HD video camera and an HP computer (w/regular DVD burner) with an i7 quad. Hybrid DVD is played on a Bluray player and HD TV. Everything is working well with editing the clips etc... Rendering has gone well with no real problems. I recorded video at the highest setting 24 Mbps. When I click on properties for a (m2ts) clip in the timeline it indicates 21,0000 to 22,000 Kbps that seems normal. I than go directly to the burn step (Create disc>AVCHD) and proceed to burn the disc at 4X. When I click on the middle icon (thumbwheel) these are the properties:
MPEG files
24 bits, 1920 x 1080, 29.97 fps
Upper Field First
(HDMV-NTSC), 16:9
H.264 Video
Video data rate: Variable (Max. 18000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)
These settings seem normal to me. Also, the "do not convert compliant......" is checked.
This is what I am not understanding. When the 18 minute HD project is brought into the burn disc module, it shows only 1.45 GB of data and after the disc is burned, the video file properties found on the disc show a total bit rate of 11,768. As a test with the same project, I did a (create video file>same as first clip) and created a mpg file that is 2.75 GB in size with a total bit rate of 21,649 which seems normal. I understand VS has a max of 18K but shouldn't I be able to create a hybrid disc with a data rate close to 18K. The video at the lower bit rate plays and look ok using my BR player but I wanted to find out if I could create a higher quality video on disc.
I have read probably every post relating to what I think my problem is and after trying a couple of things, I cannot increase the total bit rate of the video on my hybrid disc.
View 14 Replies
View Related
Mar 1, 2011
90 mins to render 6 mp4 files to an AVCHD file. I don't see much quality difference for the 3x longer rendering time and file size compared to an mpg file.
View 3 Replies
View Related
