VideoStudio :: Pro X6 - Clip Goes Black After Splitting It?
May 14, 2013
I am trying to split an avi file in the timeline. I split the clip at the required entry point (using the scissors). The 1st part is then marked with a yellow bar. As soon as I move the slider along to get to part where I want to split the clip again (the exit point) - the clip goes black and I can't see it. I if I click on "clip" the clip reappears - but if I click on "project" the section I am trying to cut out goes black again.
View 2 Replies
ADVERTISEMENT
Nov 30, 2011
I have a very unusual problem and I can't work it out. I have 1920x1080 clips in AVCHD format taken from my Full HD Digital movie Camera. It's a cheapy - Kogan! When I place all the clips together in Studio Pro 4 and render the video outpout or even preview in the clip window I get the frames splitting above and below the frame. The clips play fine in all players and as you can see in the second attachment is the Pro preview player compared to Media classic which renders the clip correctly.
You can see the top and bottom of the frame is duplicated on every transition or start of next clip
View 3 Replies
View Related
Sep 29, 2012
I wanted to split a clip, but I've split a project (after 4 minutes). Now, when I want to insert an audio file, it stops playing after 4 minutes although it's much longer. Every new project is also split and I cannot insert music. It stops playing after 4 minutes. I have found the explanations about splitting the clip, but nothing about the splitting the whole project. How can I make my new projects "entire" and insert the full-lenght audio?
View 9 Replies
View Related
Dec 28, 2012
I decided to make the jump from X3 to X5 ultimate to give Corel a try again, actually the deciding factor for me was the included mercalli stabilization as it seems to be pretty good.
Anyway, I created about a 10 minute movie from a few videos, which is divided into many clips. Now I want to disable the audio from the video track and add a sound track. I found a nice sound track with the included auto music, but I can't figure out a way to mute the entire audio track from the video so I only hear the added music. I can only see how to do it one clip at a time. Is there a way to do all the clips at once?
I guess in hindsight I should have muted the audio from the video before splitting them into clips, but I've been used to using Vegas which allows you to mute the audio from the entire video track and thought I could do it later with X5.
Am I stuck with doing one clip at a time? Or do I have to save the movie then bring it in as one large clip then mute the audio from the video so I can replace it with a music track? the mercalli seems to work pretty good - which version it is they bundle with X5?
View 2 Replies
View Related
Oct 11, 2011
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies
View Related
Nov 21, 2012
I have done some interviews using a Nikon D90 (only thing at hand; build in microphone and bad audio). Now I need to clean the sound and focus on human voice – and hope the Audio Filter in VS will do the job.
If I split audio to apply filters, can I then continue to edit my project just as before – or will I break things when adding new clips, photos, titles etc.?
View 13 Replies
View Related
Mar 17, 2014
I have created 3 different sequences, and placed a clip into each one. I went into #s 1 and 2, and added a dip to black transition to the end of the clip in each. When I went to #3, I was unable to add the dip to the clip in there. Dragging the transition to the clip on the timeline gave me a had with a circle + slash. Double clicking the transition wit hteh clip selected did nothing. The layer is not locked.
View 5 Replies
View Related
Sep 23, 2012
I'm a complete newbie and I'm trying to design some T-shirts using public domain clip art of old woodcuts and pen and ink illustrations. I want to have them printed by an online site. The trouble I'm having is making the image transparent so that the black line art is solid but the color of the t-shirt shows through. the illustrations are so intricate it is impossible to use the magic wand or erase the white area within the illustration. Is there a simple way to do what I want to do?
View 5 Replies
View Related
Mar 18, 2013
I just downloaded the videostudio X6 trial version. For some reasons, some sequences from mpg clips I added to my project seems to be repeating itself for no reason. The bug occurs within a unique sequence and might change the "restart" position while the timeline cursor.
Ex: Original video = Cow cross the road, a car hit the cow then the car explode and finaly a generic
After importing the original video = Cow cross the road, a car hit the cow then the car explode, then the car hit the cow a second time
If I move the cursor right to left a couple of time, it might end up missing the first part of the clip where the cow is suppose to cross the road (replaced by a second car exploding)
It's a single clip and the final display is changing even if I don'T touch anything. I use to be a Ulead video studio user and I never had such problem.
View 10 Replies
View Related
Aug 4, 2013
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
View 5 Replies
View Related
Sep 4, 2013
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies
View Related
Nov 27, 2013
How can I make a white colour clip the same shade as the white vignette filter.I want to place overlayed images with a vignette onto a white clip on the main video track so that they blend seemlessly in X5.
View 12 Replies
View Related
Feb 1, 2013
certainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
View 2 Replies
View Related
May 27, 2011
I've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
View 8 Replies
View Related
Jan 5, 2013
How to rotate a clip through 90deg?
View 5 Replies
View Related
Nov 2, 2010
How do I delete both the thumbnail and the clip from my computer ? The Delete in the library only deletes the Thumbnail.
I want to clear the unusable files from my computer.
View 3 Replies
View Related
Nov 24, 2013
How can I add multiple titles to the same clip, but enter the clip at different times ..?
I am trying to add a title by having "____ production presents..." (fades out) (fades in) "Title of Movie"
View 6 Replies
View Related
Jun 20, 2011
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies
View Related
Aug 9, 2012
I am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
View 5 Replies
View Related
Nov 10, 2011
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?
View 2 Replies
View Related
Aug 24, 2013
In videostudio x6, How to zoom and pan on a video clip.
View 1 Replies
View Related
Jul 3, 2011
Within a DVD menu I created a motion menu. However I don't want to have the first clip as introductory video for the motion menu. I unmarked the checkbox named "use first clip as introductory video and added, in the first page of the Share - DVD, the clip that must be played in the motion menu (moved the clip most left).
In the menu itself its now fine when nothing is selected, though when selecting the total video to play, the selected video file of the motion menu starts to play where the first video file (clip) must be played. I know that in the main menu I can select the first clip to play as well but that's exactly what I want to avoid..
I removed all chapters since I don't like to have a sub-menu. Just one overall main menu to play the total video, and in the DVD menu in the motion menu only, I want to see (and not select) the chosen clip.
View 2 Replies
View Related
Jan 21, 2012
I am usin the trial version of VideoStudio. After a lot of fiddling about (VideoStudio didn't recognize my camcorder) I was able to see my video clips in VideoStudio by placing my memory card in an external card reader. Whilst all the clips appear, VideoStudio informs me that there are no valid video clips.
View 9 Replies
View Related
Sep 27, 2011
I shoot AVCHD video from my Canon Vixia HF S 21 at the highest setting of 24 Mbps / 60i. I have a Lite-On BD Burner and make BD-R discs. Originally when creating the movie that will be burned to disc, I was using the Blue Ray option (MPEG2 25000kbps). I was not happy as I saw much degradation of the image. I know from users on this forum that H.264 is the prefered format, but VS X3 limits you to 20000kbps, which will result in an even more degraded image. (Will this limit be removed in VS x5??)
What I found by accident was in the above project, use the option "Same as first clip". This resulted in an H.264 video, VBR 22700 kbps and the video is very sharp on my 55" LCD TV compared to the MPEG2 compression. So I am quite happy with this setting.
My problem is on my project right now, the Same as first clip option is grayed out. Why is this happening? Could it be that this time I captured as real 24F rather than in 60i format? My only option is MPEG2 for BLuRay, or use MPEG optimizer which still shows Mpeg2 but now VBR is 22700 rather than 25000 kbps. There is no way to get it to render as H.264. BTW I also noticed this the other day when rendering a project from video from my wife's Flip camera.
View 6 Replies
View Related
Aug 6, 2011
VS ProX4 allows us to rotate a clip by 45 degrees. I need to just sightly rotate it (1 degree or less). It can be done very easily with other editong softwares; I guess it can also be done with ProX4.
View 4 Replies
View Related
Jul 23, 2012
I want to reverse a clip in the time line and cant get to the appropriate place to do so in X5.I click the media icon-select the clip in the timeline-click options and the FX screen shows.I am not able to get rid of the FX screen to get where I want to.I have selected the storeyboard view and gone back but still the FX scgreen is the only option.
View 6 Replies
View Related
Aug 28, 2010
Trying to take a chunk of frames out of the middle of a clip. The manual says:
"The Navigation Panel is used to preview and edit the clips used in your project. Use the Navigation Controls to move around a selected clip or your project. Use the Trim Markers and Scrubber to edit your clips."
I have done that. Trim Markers set to start and end of frames to be removed. So what is next? Where is the magic button that removes the unwanted frames? Have tried Delete but nothing apparently changes.
While I am at it, how do the scissors work? Can click on them at the start of a series of frames but they become greyed out after that.
Have done a lot of stuff in Windows Movie Maker, which was much more straightforward, but unfortunately it can't cope with HD. VSX3 manual is good at giving you various different ways of selecting frames for deletion, but seems to miss out on the punch line: "now do this to delete them".
View 11 Replies
View Related
Mar 30, 2012
Several clips were shot tilted a little bit. Is there a way to correct them? I tried transform, but black background edges showed.
View 1 Replies
View Related
Aug 7, 2013
How does one position a clip along the timeline where it needs to be? I'm either doing something wrong or there is a bug in the software
dragging a video clip(any format) from the library to the video track results in the clip being placed at the beginning. I cannot be drag/re-position it along the timeline. Also, the clip can be shortened using the handles on either end, but cannot be expanded back to its original size in the timeline. for now, I'm using the trim markers to do so. I contacted tech support & received a head-scratching out-of-context reply. Either they're not understanding me or don't care.
View 2 Replies
View Related
Jul 28, 2013
I'm editing MTS files/AVCHD. Footage filmed with a panasonic cam, using Pro 6, when I hit share tab - create video file - I have many choices but I would like to save it as high format as the original, so do I hit , (Same as First Video Clip) or (AVCHD) both are nearly the same I'm guessing, I've saved in both formats and both ended up been the same size. What one I should save to ? I have added the properties of the original file.
View 14 Replies
View Related
Feb 16, 2013
Using X5 Ultimate Using the Edit function tab, and with several clips in the timeline, selecting one, then choosing clip mode and playing the clip in the view panel happily provides the clip embedded sound too. But occasionally, it doesn't. Generally after doing something related, eg today, I was recording a voiceover file to go with a clip, and when finished I just played the clip in clip mode - and just got images, but not the sound which is embedded in the clip (don't expect to hear the voiceover in that configuration). When it happens, I can get the sound embedded in the clip back by:
- choosing project mode, then playing the clip section; or
- changing the function tab to share, then back to edit, and then playing the clip; or
- saving the project file, closing X5 and then reopening both X5 and the same project file, and playing the clip.
Like, the control(s) that manage clip sound in the clip mode, play, seem to get "lost" during some edit functions and require a serious elbow jog to get back together.
Is there a control setting that prevents it happening in the first place?
View 2 Replies
View Related
