VideoStudio :: X3 - How To Remove Some Frames From A Clip
Aug 28, 2010
Trying to take a chunk of frames out of the middle of a clip. The manual says:
"The Navigation Panel is used to preview and edit the clips used in your project. Use the Navigation Controls to move around a selected clip or your project. Use the Trim Markers and Scrubber to edit your clips."
I have done that. Trim Markers set to start and end of frames to be removed. So what is next? Where is the magic button that removes the unwanted frames? Have tried Delete but nothing apparently changes.
While I am at it, how do the scissors work? Can click on them at the start of a series of frames but they become greyed out after that.
Have done a lot of stuff in Windows Movie Maker, which was much more straightforward, but unfortunately it can't cope with HD. VSX3 manual is good at giving you various different ways of selecting frames for deletion, but seems to miss out on the punch line: "now do this to delete them".
View 11 Replies
ADVERTISEMENT
Nov 30, 2011
I have a very unusual problem and I can't work it out. I have 1920x1080 clips in AVCHD format taken from my Full HD Digital movie Camera. It's a cheapy - Kogan! When I place all the clips together in Studio Pro 4 and render the video outpout or even preview in the clip window I get the frames splitting above and below the frame. The clips play fine in all players and as you can see in the second attachment is the Pro preview player compared to Media classic which renders the clip correctly.
You can see the top and bottom of the frame is duplicated on every transition or start of next clip
View 3 Replies
View Related
May 24, 2013
can Corel VS Pro X5 (or X6) convert video clip frames to images ( .bmp, .tif, ...)? Also can convert images to video clip frames?
View 12 Replies
View Related
Oct 17, 2011
I have taken a short video of a man sitting at a table. There is no movement but the man is talking. A little bit of the microphone can be seen. I tried to take the video into Paintshop Pro X3 to remove this object with smart carver. Is there a way to edit this video so that unwanted objects can be removed from the frames. I have Paintshop Pro X3 on this computer, and PhotoImpact on another computer. Can either of these programs be used to remove objects from frames.?
View 1 Replies
View Related
Mar 15, 2011
How do I remove a small section from the middle of a clip? The help section tells how to shorten a clip or split it in two but not what i want to do.
View 3 Replies
View Related
Jan 31, 2013
If there is still an option somewhere where I can force my import to be frames and set duration to 5 or 10 frames like in 2012. or force a set of sequences o be imported as one clip.
Update: Found the frames option but no frame durations available. But no single clip available in case of importing multiple sequences or frames that need to be in a single sequence.
Currently dancing between Flame Premium 2013x2sp3/2013Sp4 nd Smoke on mac 2013Ext1
View 2 Replies
View Related
Oct 11, 2011
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies
View Related
Jul 29, 2011
If I have a 10 frames long clip and a 20 frames long clip for compositing, and with those clips, I wanna set the 10 frames long clip moved 5 frames in Action, How can I do it without Slip and Transparency options? I tried to find the way from Animation tap, but I could not.
View 3 Replies
View Related
Aug 12, 2011
I searched through all the key short cuts, looked through the user guide and I'm at a loss where you can nudge a clip back and forth by single frames. I saw you can hold 'D" and SLIP the clips one frame at a time, but not move them outright.
So, since nudging is one of the absolute most basic requirements of any editor, I know it's in there. But alas, they hid it too well. here it might be?
Maybe hiding next to a trim mode I don't see where I can see how my slips and slides affect the area around the clip?
View 2 Replies
View Related
Sep 18, 2012
And that problem is how I can remove the frames, let's say for about ten minutes, of a video I made with an DSLR-camera. Maybe the answer is simple, nevertheless I couldn't find it.
View 4 Replies
View Related
Oct 23, 2012
Using Photoshop Elements 8, how do I remove the white background from clip art?
View 8 Replies
View Related
Oct 24, 2012
How do I remove the audio track from a video clip which I am using in a Elements 10 slideshow?
View 4 Replies
View Related
Jun 20, 2011
I have Video Studio Pro X3. I've never had a problem since I got it, but recently I've been trying to render video at 60 frames per second. I've looked everywhere online for tutorials but still don't understand how to do it. I keep getting 29.97fps in the end. I need it for a project and I need it very soon.I use MP4 video files at 60fps.
View 10 Replies
View Related
Oct 26, 2010
It occurs only in Corel Video Studio Pro X3 ... two extra (frozen) frames for free. In other programs all frames of my camera act correct.
At the beginning of each video file there are two extra frames at the timeline, so each video file starts with three identical frames and that causes each file starts with 0,12 sec frozen video.
When I remove the two frames, two frozen frames are added at the end if a file! In the end-product there are three frozen frames between each cut! And 0,12 seconds is visible …
View 14 Replies
View Related
Aug 27, 2011
After reviewing some of my rendered videos, I find out that most (if not all) of them lose or add a few frames during the rendering. This seems to happen within the first 30 seconds of my 3 minutes clips. My orginal MPEG2 files are OK, but not the rendered MPEG, after editing. To make sure of that, I review them in my Pro X4, I place the original on my main track, and I put the rendered MPEG on the overlay. I can then pin point the exact frame where that problem appears. My original file is of good quality and has been captured wih a hard disk camcorder (Sony SR100).
View 14 Replies
View Related
Jan 28, 2013
Is it possible to make a project with 28.214 frames per second? My Samsung Galaxy makes videos with 28.214 per second.
View 2 Replies
View Related
Oct 28, 2011
I place a live music video clip in the timeline. I add the audio clip from a Zoom H2 to the timeline. I sync it up at the beginning matching the audio from the video clip. When I check it 25 minutes into the project the sync is no longer exact. If I slide the audio clip up two frames it is synced at the 25 minute mark but now it's not exact in the beginning. I need to use both sources of audio.
View 5 Replies
View Related
Apr 7, 2011
I'm seeing random occurrences of single all-red frames in my output. They seem to occur in the middle of a clip.
My clips are AVCHD (HDV captures from a Sony HDR-FX7 via Firewire using HDVSplit). I'm outputting them to "HDV 720p - 30p (for PC)". Total edited projects are 9-10 minutes each and I'm seeing 2-3 of these "red frames" per output file.
View 3 Replies
View Related
Oct 13, 2013
I'd like to know if it's possible, and if so, how to do it..... in X5, to insert multiple images into their own single frames, at one time. Say I have images 1.jpg - 250.jpg, and I want all to be loaded into single frames... for an animation.
View 2 Replies
View Related
Jun 28, 2011
I'm using Ulead VS 11. When I make a clip and render it as new video, the new video is repeating frames all over the place. As it renders I can see it happening. It's like the video renders minute/second 1:01, then jumps back to 1:00, then re-renders 1:01. All over the place. These repeat frames are not in the original video.
The format of the original video is MPEG2, 8000 bps, and is being converted to WMV (don't ask!). I have found that the only way to retain any semblance of quality in the new video is to change it to WMV, and for my purposes, this is adequate. I have tried about 10 of the different output formats offered in the "Create Video" option, including saving with settings the same as project settings, and the result is the same, with the exception that the WMV 720 is the only one where a decent quality is maintained. That's a whole other question -- why rendering with "same as project settings" gives me total junk.
Is there some other setting that could be causing these frame repeats? I don't believe I had these problems when the original video was WMV rendering to WMV. But MPEG2 to MPEG2 is not fixing it either, so there must be something else.
View 8 Replies
View Related
Jan 29, 2013
I have a full HD video, a 1920x1080 resolution
I need to export video frames to images, jpeg for example, I use "Edit / Take a snapshot" from VideoStudio Pro X4 menu, but this option only exports 1024 x 576 resolution images....Can I export 1920 x 1080 resolution images?
View 1 Replies
View Related
Mar 18, 2013
I just downloaded the videostudio X6 trial version. For some reasons, some sequences from mpg clips I added to my project seems to be repeating itself for no reason. The bug occurs within a unique sequence and might change the "restart" position while the timeline cursor.
Ex: Original video = Cow cross the road, a car hit the cow then the car explode and finaly a generic
After importing the original video = Cow cross the road, a car hit the cow then the car explode, then the car hit the cow a second time
If I move the cursor right to left a couple of time, it might end up missing the first part of the clip where the cow is suppose to cross the road (replaced by a second car exploding)
It's a single clip and the final display is changing even if I don'T touch anything. I use to be a Ulead video studio user and I never had such problem.
View 10 Replies
View Related
Aug 4, 2013
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
View 5 Replies
View Related
Sep 4, 2013
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies
View Related
Aug 24, 2011
I have a number of video files captured at 1080X720 full frame resolution at 29.97 frames/second, shown on my PC as .MOV files.
When watching the original files either on my PC or TV, movement is fluid and smooth.
When watching a finished video created via VideoStudio Pro X4 using the aforementioned files, movement is jerky, and is particularly noticeable when watching a panned scene. The effect is so bad that it makes viewing on a large screen impossible as the picture movement jerks/judders about. I have looked at the project preferences, and notice under Project Option>General tab, the only available frame sizes are the standard ones which only go up to 720X576. The radio button to select a user defined frame size is greyed out and cannot be selected to input my own frame sizes. I’m therefore unable to actually input the frame size of the source video files.
Basically how do I render a finished video without jerky movement?
View 12 Replies
View Related
Nov 27, 2013
How can I make a white colour clip the same shade as the white vignette filter.I want to place overlayed images with a vignette onto a white clip on the main video track so that they blend seemlessly in X5.
View 12 Replies
View Related
Feb 1, 2013
certainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
View 2 Replies
View Related
May 27, 2011
I've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
View 8 Replies
View Related
Jan 5, 2013
How to rotate a clip through 90deg?
View 5 Replies
View Related
Nov 2, 2010
How do I delete both the thumbnail and the clip from my computer ? The Delete in the library only deletes the Thumbnail.
I want to clear the unusable files from my computer.
View 3 Replies
View Related
Nov 24, 2013
How can I add multiple titles to the same clip, but enter the clip at different times ..?
I am trying to add a title by having "____ production presents..." (fades out) (fades in) "Title of Movie"
View 6 Replies
View Related
