VideoStudio :: Getting AVCHD Transition (blips)?

Apr 7, 2009

solving the problem of brief "blips" or "jerks" following transitions in video generated by VS X2 from AVCHD clips.

Last November, I reported to Corel the problem of brief "jerks" or "blips" in AVCHD video files or hybrid discs generated by VS Pro X2 from clips created by my Sony SR11. There was a long thread here in which several Canon users stated that they had the same problem. [URL]

In addition to transitions, I also get the same blips in the video at the end of titles placed over the top of video. I am not sure whether Canon users have that problem.

Since the problem still has not been fixed, I followed up last week with Corel asking for the status of the fix for this problem. In their reply, they asked for more sample clips and asked that I post their ftp site URL where you can upload clips that will demonstrate the problem. They want clips from the various AVCHD camcorder models which are having this problem. They didn't say whether they want raw clips or VS-generated clips that contain the blip, but I suspect they want raw clips so they can try to re-create the problem on their systems.

When selecting a clip to upload, what appears to cause the problem is that at the end of a transition or title, the video jumps back one frame and then proceeds forward again. Thus two frames are repeated, which causes the "blip". You can see this by viewing the generated file frame-by-frame.

So the blip is most apparent when there is obvious, but smooth, movement in the original clip. The raw clip I sent them when I reported the problem in November was of a truck driving down a highway, moving across the screen from left to right, and was shot on a tripod to eliminate any camcorder movement. In the VS-generated video, at the end of the transition, the truck jumped backwards slightly then went forward again.

A clip containing little or no movement, or a clip that is already jerky and unsteady, will not illustrate the problem well. So please select your clip accordingly. A single object moving across the screen against a non-moving background would be ideal.

Following is the ftp site where you can upload clips.

[URL]

View 14 Replies


ADVERTISEMENT

VideoStudio :: AVCHD To Blu-ray

Nov 6, 2012

I've a professional Panasonic camera capable of 720p and 1080p AVCHD recording both at 50 or 25 frames per sec (PAL). My recent clips are AVCHD h.264 50fps @ 24000-26000kbps. I usually render the file to film first, then create a disc after. I use VSP x5

For a short edited film (less than 5gb), I'm happy to make an AVCHD full-HD disc and enjoy a seamless and lossless transfer from project to a standard disc. The picture quality seems true to the original recording.

Q1) For longer films where I need to use a Blu Ray, what exactly is the best route to take and what boxes should be (or not) checked?? I did create a Blu Ray disc using the largest output 35000kbps max and I thought afterwards the footage looked a bit "contrasty" and second hand.

Q2) I've read in the forums that 50fps for 1080p Blu Ray is not available yet (hence the conversion to 25fps). Is it available at 720P and what/where are the settings?

Q3) If I know before filming that I'll be needing a Blu Ray, is it advisable to shoot the original at 25fps to avoid deterioration at render stage?

Q4) For downsizing to 720x576 Standard Definition discs, do I need smart render on? Two pass encode? for best quality?

Bottom line = I want to avoid my footage being unnecassarily hauled through rendering hoops and the final AVCHD or Blu Ray to be as best it can.

View 14 Replies View Related

VideoStudio :: AVCHD 3D Rendering

Jun 12, 2012

VS X5 Pro wont render clips totalling more than 6 plus minutes......Gives me one of these 2 errors >frame 724 unreadable, frame 1024

unreadable. I click on OK and poof! everything is gone!!

View 12 Replies View Related

VideoStudio :: Does X5 Support AVCHD 2.0

May 29, 2012

whether Video Studio could handle the video file format from a high end Panasonic prosumer camcorder. It seems the question I should have asked is whether Video Studio X5 can edit and export files in the new AVCHD 2.0 format, which is used not only by Panasonic but by other camcorder manufacturers and which, according to an email from a reviewer for camcorderinfo.com is not compatible with a large number of video editing software programs. Can X5 handle AVCHD 2.0?

View 9 Replies View Related

VideoStudio :: AVCHD To MOV Conversion?

Nov 10, 2010

I need to convert AVCHD footage to 1280x720 MOV (qt) files. VSX2 via create a video file, and VSX3 can do this via video file creation and batch conversion as well. The problemis that I can't find any setting to get the bitrate of the MOV files under contol. VSX2 generates files with very high bitrates, VSX3 with low bitrate, and when I select "check data rate" in the advanced options settings for the MOV file, I get a prompt at every new file start (and I have many files) like " the bitrate exeeds the settings...do you want to continiue" .

View 10 Replies View Related

VideoStudio :: Copying X5 AVCHD To USB

Mar 15, 2013

I have VideoStudio X5.I have saved my completed video as a video .m2t file and as an AVCHD file neither of which will replay on the computer if I click on the file folder. If I copy them to a USB stick they don't replay on the HD tv either. Both play as discs on my laptop quite happily but how do I transfer them as videos to a USB

View 14 Replies View Related

VideoStudio :: HD Video (AVCHD) - Red Eye Removal

Jun 8, 2011

I used a video light in lower light conditions to take an HD video (in AVCHD) which will be rendered to PAL SD DVD. Unfortunately the main speaker has red eye. Can my VSP x3 remove this?

View 2 Replies View Related

VideoStudio :: Convert AVCHD To AVI Before Editing In X3?

Feb 18, 2011

have a newly acquired Canon HF S21 video camera that captures footage in AVCHD. I plan on using Corel for capture and edit.

My question is for other AVCHD users. Do you use any tools to convert the files to .avi? And then edit those in VS X3 in order to aid the rendering process?

Someone refered me to Cineform Neoscene. It is a bit pricey, but here it is: [URL]

Is AVCHD really a problem in VS x3? If I convert to .avi, will I be able to render to a BD DVD later on and still retain the HD image as good as that on the original AVCHD footage?

View 12 Replies View Related

VideoStudio :: Getting AVCHD Menu Templates?

Jul 25, 2011

where to get more AVCHD disc menu templates than the 8 that come with it? I was wondering if the demo of DVD MovieFactory 7 has more and if I installed the demo if I could copy the templates over to VSX4.

View 6 Replies View Related

VideoStudio :: Slow Processing Of AVCHD?

Dec 7, 2011

why my Corel VideoStudio ProX4 program is having a hard time to run AVCHD MTS files.Seems like they are slowing my computer to a crawl.Causing the program to quite. My computer is a quad core, 3.00 GHz 4g's of ram.Lots of hard drive space.I don't understand it.

View 13 Replies View Related

VideoStudio :: Timecode / Timestamp From AVCHD?

Jul 24, 2011

To remind me when the video was taken, I'd like to have a timecode / timestamp overlaid on the video.

Per the VS X4 User Guide: To enable timecode retrieval for AVCHD

1. In the Capture Step Options Panel, click Import from Digital Media.

2. Select the thumbnail of the video file. Click Start import to launch Import Settings.

3. In Import Destination, select Insert to Timeline or select Add video date information as title.

4. Choose Entire video to import the timecode of video file to appear as a title spanning the entire duration of the video. Choose Duration to import the timecode as a title within a specified duration. Click OK to apply the settings.

View 8 Replies View Related

VideoStudio :: Pro X4 - Burn AVCHD At 1280x720p

Jan 3, 2012

VS Pro X4 - I do not consider myself an expert with video editing/authoring, but I do have a fair amount of experience with capturing/editing/authoring h.264 files via a Hauppauge 1212 HD-PVR, ArcSoft Total Media Extreme, and VideoReDo. In fact, I have burned around 5,000 DVD and 2,000 AVCHD discs with outstanding results using those products, as well as editing and storing thousands more captured programs directly to HDD. Unfortunately, these products do not allow me to create Blu-ray discs, so that is why I am trying to switch over to VS X4.

My baseline for what I want from VS X4 is simply what I have been able to do with no effort at all using ArcSoft Total Media Extreme (supplied with the HD-PVR): I capture HD programing at 1280x720p 60fps using a variable bit rate (usually 7 Mbps) and AC3 audio, edit out unwanted material, add menu and chapters, then burn directly to an AVCHD disc. Using this method, I generally get a minimum of 3 hours HD material on a standard DVD5 blank, and total authoring/burning time for a disc is somewhere around 20 minutes.

My problem is that I have not been able to come anywhere close to this efficiency yet with VS X4. The .ts source files play and edit in VS X4 just fine, but then I hit a wall when I try to produce the output. There don't seem to be any default project profiles to create AVCHD 1280x720p, and even when I try to use Customize, i cannot access the needed fields, such as user defined frame size. And everything I have tried produces HUGE output files, 4 or 5 times larger than the source files!

Sample Source file MediaInfo:
ID : 0 (0x0)
Complete name : C:UsersPublicVideosInput for Edit or ResizeHoliday for Lovers 720p_7.1v.TS
Format : MPEG-TS
File size : 2.30 GiB
Duration : 1h 43mn
Overall bit rate mode : Variable
Overall bit rate : 3 166 Kbps
Maximum Overall bit rate : 18.0 Mbps

[Code] ...

View 2 Replies View Related

VideoStudio :: Panasonic AVCHD Files

Aug 22, 2012

Earlier this year I purchased a Panasonic HDC-DS800 high definition camcorder. After years of editing ATI files, I'm going to use my VideoStudio (X4) to edit AVCHD files.

To get the files from the camcorder to the computer, there are 2 options. One is to go directly to the SD card on the camcorder through the My Computer option. This gives me .MTS files, which I can transfer to my hard drive.

The other option is to use the software supplied with the camcorder, which is HD Writer AE 3.0. This transfers to my hard drive .m2ts files. Along with the .m2ts files, it also transfers (or creates) .tmb files, .pmpd files, and .cont files.

View 8 Replies View Related

VideoStudio :: Does AVCHD Standard Allow For Thumbnails

Apr 24, 2011

Does the AVCHD standard allow for thumbnails, so that when a disc is authored and then inserted into, say a PS3, it will show a thumbnail like a BluRay does?

View 1 Replies View Related

VideoStudio :: How To Set Project Properties To AVCHD

Aug 23, 2012

When I select Settings>Project Properties, I only have two options: MPEG (SD MPEG2) and AVI. How do I set project properties to high definition such as AVCHD?

View 4 Replies View Related

VideoStudio :: Difference Between AVCHD And MPEG-4 HD?

Jun 14, 2012

I just moved from a Sony HDV (HDR-HC3) camcorder to a Panasonic AVCHD one (HC V700). When rendering my final video, I've always used MPEG-4 HD. This new camcorder records in AVCHD. I'm not sure if I should be outputting to MPEG-4 HD or AVCHD. Before I had issues rendering in AVCHD, which is why I didn't use it.

What's the main differences in MPEG-4 HD vs. AVCHD? What are the advantages and disadvantages? Which one is better and the one I should use?

View 6 Replies View Related

VideoStudio :: Same As First Video Clip - MTS / AVCHD

Jul 28, 2013

I'm editing MTS files/AVCHD. Footage filmed with a panasonic cam, using Pro 6, when I hit share tab - create video file - I have many choices but I would like to save it as high format as the original, so do I hit , (Same as First Video Clip) or (AVCHD) both are nearly the same I'm guessing, I've saved in both formats and both ended up been the same size. What one I should save to ? I have added the properties of the original file.

View 14 Replies View Related

VideoStudio :: Creating AVCHD Video

Feb 2, 2011

I am using VS2 and have been working on creating a "hybrid DVD" AVCHD video. I have a Canon HD video camera and an HP computer (w/regular DVD burner) with an i7 quad. Hybrid DVD is played on a Bluray player and HD TV. Everything is working well with editing the clips etc... Rendering has gone well with no real problems. I recorded video at the highest setting 24 Mbps. When I click on properties for a (m2ts) clip in the timeline it indicates 21,0000 to 22,000 Kbps that seems normal. I than go directly to the burn step (Create disc>AVCHD) and proceed to burn the disc at 4X. When I click on the middle icon (thumbwheel) these are the properties:

MPEG files
24 bits, 1920 x 1080, 29.97 fps
Upper Field First
(HDMV-NTSC), 16:9
H.264 Video
Video data rate: Variable (Max. 18000 kbps)
Audio data rate: 384 kbps
Dolby Digital Audio, 48 KHz, 2/0(L,R)

These settings seem normal to me. Also, the "do not convert compliant......" is checked.

This is what I am not understanding. When the 18 minute HD project is brought into the burn disc module, it shows only 1.45 GB of data and after the disc is burned, the video file properties found on the disc show a total bit rate of 11,768. As a test with the same project, I did a (create video file>same as first clip) and created a mpg file that is 2.75 GB in size with a total bit rate of 21,649 which seems normal. I understand VS has a max of 18K but shouldn't I be able to create a hybrid disc with a data rate close to 18K. The video at the lower bit rate plays and look ok using my BR player but I wanted to find out if I could create a higher quality video on disc.

I have read probably every post relating to what I think my problem is and after trying a couple of things, I cannot increase the total bit rate of the video on my hybrid disc.

View 14 Replies View Related

VideoStudio :: X4 Performance - SD Upscale To AVCHD?

Mar 1, 2011

90 mins to render 6 mp4 files to an AVCHD file. I don't see much quality difference for the 3x longer rendering time and file size compared to an mpg file.

View 3 Replies View Related

VideoStudio :: AVCHD Disc With DVD Content

Apr 8, 2011

With X4, can you author an AVCHD disc with 720x480 content in H.264 video and AC3 Audio and burn it to a DVD that would be playable in a Blu-Ray player? Because my thought was with an 8.4 DVD disc you could fit a lot more TV shows on one disc, vs backing them up in DVD in Mpeg2 format. In fact with a 25GB Blu-Ray blank, you could probalby get a whole 22 episode season on one disc.

View 1 Replies View Related

VideoStudio :: Types Of AVCHD Files

Jul 3, 2011

At the "Share/Cerate video file/AVCHD" step, among the other types appears the following:

AVCHD (1920X1080P)
AVCHD (1920X1080)

Since I am dealing now with HD movies, what is the difference between those types, so I am not sure what should I choose.

View 8 Replies View Related

VideoStudio :: Do AVCHD Files With MTS Extension Work In X3

May 5, 2010

I am at my wit's end here! U completely reinstalled Windows 7 Ultimate (64 bit) and fully updated my drivers, software, and directx. I Installed VSX3 and I cannot render my AVCHD files from my Sony SR11. I get a dump error that points to the AVCHD dll file. I have used that last 5 versions of VS and my AVCHD files were fine with 11 and 12.

Are there users on here that are successful with Sony AVCHD files on Windows 7?

View 14 Replies View Related

VideoStudio :: AVCHD - MTS Files Constantly Crash X3?

Dec 2, 2010

Sometimes I can get it to do a Batch Convert without crashing. Sometimes.

It will always crash when I drag an MTS into the timeline.

View 4 Replies View Related

VideoStudio :: X3 - Exporting Crashed In Blue-ray / AVCHD

Jan 6, 2011

I'm just trying out the VSX3 trial and have some problems exporting.

-Exporting crashed in Blueray/AVCHD, I disabled the HW acceleration on encoder and it seems to work (slow offcourse). I'm using a GTX460 and I saw the solution here

-When I try to make my own export profile I can see only one codec "Ulead Mpeg Now Encoder" limited to 720x576 ...

Is that last problem due to the trial version ? I installed all the last patches and now in version 13.6.2.69. I'm using the french interface but that shouldn't be a problem I suppose ?

PS : The editing features are very intuitive and fast I like it ! But without a good export it's useless

View 1 Replies View Related

VideoStudio :: X4 - AVCHD Splitting Frames On Each Clip?

Nov 30, 2011

I have a very unusual problem and I can't work it out. I have 1920x1080 clips in AVCHD format taken from my Full HD Digital movie Camera. It's a cheapy - Kogan! When I place all the clips together in Studio Pro 4 and render the video outpout or even preview in the clip window I get the frames splitting above and below the frame. The clips play fine in all players and as you can see in the second attachment is the Pro preview player compared to Media classic which renders the clip correctly.

You can see the top and bottom of the frame is duplicated on every transition or start of next clip

View 3 Replies View Related

VideoStudio :: Proxy Files For AVCHD Editing

Oct 3, 2013

I use proxy files for my AVCHD editing. One of the options in the compression settings relates to " quality vs speed". Imo Proxy files are working files which content is not used for the final rendering. what the meaning / consequence is of the quality vs speed choice?

View 3 Replies View Related

VideoStudio :: What Is Best Format For Streaming AVCHD Videos

Mar 23, 2011

I have a canon 100HF VIXIA that produces AVCHD files. I have been having problems streaming edited videos (VSX3) to my Western Digital Live Plus media player and Samsung BD player...I get very choppy video and sometimes complete stops. My playstation 3 can handle these streams but not the other media players. What would be the best file format to render these videos (in HD)? Should I be outputing these as Blue Ray mpeg2 INSTEAD OF acvhd?

View 8 Replies View Related

VideoStudio :: AVCHD Option To Burn A Disc

Apr 5, 2013

AVCHD and blu ray are the same. I have an HD camcorder which supports AVCHD. Is this the same as blu ray or just Hd. If I chose the AVCHD option to burn a disc will this be blu ray and can I use a standard DVD to burn it and will I need a blu ray player to watch it.

View 14 Replies View Related

VideoStudio :: BDMV Versus AVCHD Quality

Jan 3, 2011

I am planning to buy a Blu-ray burner. Is there a difference in quality between AVCHD (that I already use to produce my VS movies) and Blu-ray BDMV movies produced with VS ? Is it visible ? I have a PS3 and a 50 inch plasma.

View 1 Replies View Related

VideoStudio :: AVCHD Project Properties Settings

Oct 10, 2011

What are the best Project Properties settings to choose when starting a project with AVCHD source clips? I may be asking a dumb question here, but I have tried to search the database, and can't find a thread that gives me what I am looking for. My camera is a JVC Everio GZ-HM320B and the clips it records have the following properties:

File Format - NTSC HDMV
Video Type - H.264 Video, Upper Field First
Attributes - 24 bits, 1920 x 1080, 16:9
Frame rate - 29.970 framse/sec
Date rate - Variable bit rate (Max 22599 kbps)
Audio type - Dolby Digital Audio
Attributes - 48000 Hz
Bit rate - 256 kbps

These clip properties were taken out of VS X4 by right clicking a clip and selecting Properties in the menu that popped up. I am concerned that I might be loosing some of the original clip quality when creating a project. I have read elsewhere on this Board that when creating an AVCHD DVD, the best workflow is to choose Create Disk after completing a project, Rather than choosing Create Video File. When I choose Create Disk, the burn module starts by defaulting to LPCM audio, and a Video data rate of 16000 kbps. I know these are adjustable to Dolby sound and up to 18000 kbps Video rate, but I wonder if I choose a different Project Properties setting when I start the project, if I might save some video quality.

View 8 Replies View Related

VideoStudio :: Unspecified Error When Burning AVCHD DVD

Oct 30, 2011

Whenever I try to Burn my project to a DVD I get an unpsecified error after about 10 minutes and the program forces a shutdown. The progress shows that it is Converting the Title 001/001. I took a quick look at the DMP file and it looks like it has something to do with permissions of the program. I'm using Win 7 64 bit OS, Visual Studio Pro X4 SP1. What is the default location to have all of your videos and project files so that there are no permission problems whe you go to burn DVD?

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved