VideoStudio :: AVCHD - MTS Files Constantly Crash X3?
Dec 2, 2010Sometimes I can get it to do a Batch Convert without crashing. Sometimes.
It will always crash when I drag an MTS into the timeline.
ADVERTISEMENT
AutoCAD LT :: 2011 - Files Constantly Crash When Saving?
Nov 8, 2010So we have inherited files from another company and there are some files which have begun crashing once the save command is initiated. Typically, the file seems to be saving for about 5-10 minutes, and then it gives a "FATAL ERROR: Cannot write to undo file (probably disk full)" alert. This obviously crashes the application without saving the file. The files that crash are the sheet files into which we have multiple xrefs which are overlays, not attachments. There are 4 xrefs in these files. I don't see why this would be a reason for the application crashing, but it's all I can think of that may be the problem.
View 9 Replies View RelatedVideoStudio :: Panasonic AVCHD Files
Aug 22, 2012Earlier this year I purchased a Panasonic HDC-DS800 high definition camcorder. After years of editing ATI files, I'm going to use my VideoStudio (X4) to edit AVCHD files.
To get the files from the camcorder to the computer, there are 2 options. One is to go directly to the SD card on the camcorder through the My Computer option. This gives me .MTS files, which I can transfer to my hard drive.
The other option is to use the software supplied with the camcorder, which is HD Writer AE 3.0. This transfers to my hard drive .m2ts files. Along with the .m2ts files, it also transfers (or creates) .tmb files, .pmpd files, and .cont files.
VideoStudio :: Types Of AVCHD Files
Jul 3, 2011At the "Share/Cerate video file/AVCHD" step, among the other types appears the following:
AVCHD (1920X1080P)
AVCHD (1920X1080)
Since I am dealing now with HD movies, what is the difference between those types, so I am not sure what should I choose.
VideoStudio :: Do AVCHD Files With MTS Extension Work In X3
May 5, 2010I am at my wit's end here! U completely reinstalled Windows 7 Ultimate (64 bit) and fully updated my drivers, software, and directx. I Installed VSX3 and I cannot render my AVCHD files from my Sony SR11. I get a dump error that points to the AVCHD dll file. I have used that last 5 versions of VS and my AVCHD files were fine with 11 and 12.
Are there users on here that are successful with Sony AVCHD files on Windows 7?
VideoStudio :: Proxy Files For AVCHD Editing
Oct 3, 2013I use proxy files for my AVCHD editing. One of the options in the compression settings relates to " quality vs speed". Imo Proxy files are working files which content is not used for the final rendering. what the meaning / consequence is of the quality vs speed choice?
View 3 Replies View RelatedVideoStudio :: AVCHD Lite Video Files Editing With X3
Nov 29, 2010If the Pro X3 Service Pack includes dealing with AVCHD Lite video files?
It says "...the update provides: Updated camera support – broadened MPEG-4 capabilities add support for additional cameras, including selected cameras from Flip, Canon and more "
Just bought a Panasonic Lumix DMC-Zs7 wich shoots AVCHS Lite HD video and a lesser quality .MOV files as well. I wanna know if Prox3 can deal with these before I upgrade!! I have Prox2 right now.
VideoStudio :: Smart Render 25mb/s AVCHD Files
Mar 14, 2011I've purchased a sony VG10E camcorder that has sourced capture at 25mbps. I have been using premiere pro for years and now find render for the imported 1 hour source AVCHD files takes over a day ! (and still changes original source material ). I've heard that the latest video studio smart renders AVCHD.
Can this provides untouched source file reproduction after editing using my sony 25mbps quality?(i'd expect untouched to remain same, while touched/transitionss etc will require render).
VideoStudio :: Constant Crashing Creating AVCHD Files?
Mar 16, 2013I'm using VideoStudio X3 and installed SP2, but creating AVCHD files constantly crashes machine.
Using AVCHD videos and overlaying text, then ouputting using preset AVCHD > PAL HD 1440
99% of time just crashes, which makes program unusable!!
VideoStudio :: Constant Crashing Creating AVCHD Files
Jan 23, 2011I'm using VideoStudio X3 and installed SP2, but creating AVCHD files constantly crashes machine.Using AVCHD videos and overlaying text, then outputting using preset AVCHD > PAL HD 1440
99% of time just crashes, which makes program unusable!!
VideoStudio :: Creating Video Files In AVCHD Format
Oct 18, 2013In order to create a video file in the AVCHD 1920X1080 format, I have the following options in the VSP X6:
AVCHD (1920X1080)
AVCHD (1920X1080, 24P)
AVCHD (1920X1080, 25P)
AVCHD (1920X1080, 50P)
What is the differences between those formats, so I don't know what to choose. My original clips are 25 frames/sec, does it means that I have to choose the 25P?
VideoStudio :: Project Settings For YouTube From AVCHD Files
May 14, 2013My camera films in AVCHD 1080, 25fps. I currently use VideoStudeo x6. i have been using it for a while and when i export for youtube videos, i find its only quality video when you change the youtube video to HD. Is there a way to set the video, so its still crisp and clear at 360p/480p, as i find its always distorted at these levels, although the footage is amazing in hd. What are the exact project properties i should set and the file export settings.
I am fully aware of the settings for youtube, however is it because iam filming in AVCHd i cant get that clean crisp look at lower levels on youtube? as the best setting for youtube are mpeg files. for reference please check this video i did: [URL]......
VideoStudio :: Create From AVCHD Files Miss Audio With Smart Render?
Jan 24, 2011I tested yesterday creating a video using "same as first video". All inserted files were AVCHD. The created video file, typed mpg, was missing audio no matter what I tried: tried mp4, avi, etc. I then turned off Smart Render in the options that pop-up when creating the video and it worked ( I have Smart Render turned off in the Preferences, BTW). This appears to be a bug or am I doing something wrong? In any case I am happy with this "work-around" Al
View 6 Replies View RelatedPhotoshop :: CC 14.1.x Crash Constantly On Windows 7
Sep 29, 2013Ever since I've installed PS CC it has crashed several times per day. I've installed 14.1.2, and the crashes still persist.
The viewport always fails to rerender at some point when I'm zooming in or out or have changed layers. The scenerios differ, but it always has to do with a needed graphics refresh. On some occasions the crash dialog will not appear until I attempt to save (knowing that's already crashed, but hoping...).
I have used Photoshop since (I believe) version 2. CC is the worst release I have ever seen.
AMD Phenom II X4 945 Processort 3.00 GHz
8.00 GB
64-bit Win 7
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 14.1.2.427
Application Timestamp: 524002c6
Fault Module Name: Photoshop.exe
[code]...
AutoCAD 2013 :: Constantly Crashing - No CER Appearing After Crash
Oct 24, 2013We have our AutoCAD2013 freezing for at least 4 times a day, on all 5 Computers.
I want to do that Customer Error Reporting thing, but no Window appears after the Crash, and I haven`t found it in the options yet.
The Computers are 3 x Fujitsu Esprimo P900 with an additional Graphic Card.
Intel Core i3, 3.3 GHz and 6 to 8 GB Ram.
2x is Windows 7 64bit and one is 32bit with 4GB RAM.
And the other two are Fujitsu Celsius M470 with 3.46GHz and 8GB RAM. NVIDIA Quadro 6000.
All Patches and Updates of AutoCAD2013 are installed. Why it crashes, why the CER doesn't appear?!
VideoStudio :: MP4 Video Files Make Program Crash?
May 3, 2011For some reason I can upload an mp4 video files into the Video Studio, but as soon as I want to work with it the program crashes down, announcing an unknown mistake. Is there any way to prevent this?
View 3 Replies View RelatedVideoStudio :: X4 Constantly Crashes During Editing
Sep 19, 2011I installed x4 the other day and it appeared to work fine. I have a Sony HD camcorder that I believe is AVCHD. I have been using and importing clips from this camera. I got the notice that an update was available and I updated the program. Since then, every time I try to edit a movie it constantly crashes. I try to import some music, it crashes. I came to the conclusion that it was the update causing it so I restored my computer to the day before I updated. It still crashes.
View 14 Replies View RelatedVideoStudio :: Constantly Losing Audio Imported
May 23, 2011Video Studio is constantly losing audio I import. I have to replace it in the time line almost every 5 minutes. Had this problem with X2 also. Updated all drivers still losing audio.
View 1 Replies View RelatedPhotoshop :: CS6 Won't Play Or Process Dolby Digital (AC-3) Audio Files From AVCHD Video Files
Jun 13, 2013Photoshop CS6 Extened won't play or process Dolby Digital (AC-3) Audio Files from my AVCHD video files.The video plays fine just no sound at all. When processed still no sound. Are there any (AC-3) audio codecs I can download and install. How would I install them. Do I need to convert audio files to another format & if so how & what format.
View 1 Replies View RelatedVideoStudio :: AVCHD To Blu-ray
Nov 6, 2012I've a professional Panasonic camera capable of 720p and 1080p AVCHD recording both at 50 or 25 frames per sec (PAL). My recent clips are AVCHD h.264 50fps @ 24000-26000kbps. I usually render the file to film first, then create a disc after. I use VSP x5
For a short edited film (less than 5gb), I'm happy to make an AVCHD full-HD disc and enjoy a seamless and lossless transfer from project to a standard disc. The picture quality seems true to the original recording.
Q1) For longer films where I need to use a Blu Ray, what exactly is the best route to take and what boxes should be (or not) checked?? I did create a Blu Ray disc using the largest output 35000kbps max and I thought afterwards the footage looked a bit "contrasty" and second hand.
Q2) I've read in the forums that 50fps for 1080p Blu Ray is not available yet (hence the conversion to 25fps). Is it available at 720P and what/where are the settings?
Q3) If I know before filming that I'll be needing a Blu Ray, is it advisable to shoot the original at 25fps to avoid deterioration at render stage?
Q4) For downsizing to 720x576 Standard Definition discs, do I need smart render on? Two pass encode? for best quality?
Bottom line = I want to avoid my footage being unnecassarily hauled through rendering hoops and the final AVCHD or Blu Ray to be as best it can.
VideoStudio :: AVCHD 3D Rendering
Jun 12, 2012VS X5 Pro wont render clips totalling more than 6 plus minutes......Gives me one of these 2 errors >frame 724 unreadable, frame 1024
unreadable. I click on OK and poof! everything is gone!!
VideoStudio :: Does X5 Support AVCHD 2.0
May 29, 2012whether Video Studio could handle the video file format from a high end Panasonic prosumer camcorder. It seems the question I should have asked is whether Video Studio X5 can edit and export files in the new AVCHD 2.0 format, which is used not only by Panasonic but by other camcorder manufacturers and which, according to an email from a reviewer for camcorderinfo.com is not compatible with a large number of video editing software programs. Can X5 handle AVCHD 2.0?
View 9 Replies View RelatedVideoStudio :: AVCHD To MOV Conversion?
Nov 10, 2010I need to convert AVCHD footage to 1280x720 MOV (qt) files. VSX2 via create a video file, and VSX3 can do this via video file creation and batch conversion as well. The problemis that I can't find any setting to get the bitrate of the MOV files under contol. VSX2 generates files with very high bitrates, VSX3 with low bitrate, and when I select "check data rate" in the advanced options settings for the MOV file, I get a prompt at every new file start (and I have many files) like " the bitrate exeeds the settings...do you want to continiue" .
View 10 Replies View RelatedVideoStudio :: Copying X5 AVCHD To USB
Mar 15, 2013I have VideoStudio X5.I have saved my completed video as a video .m2t file and as an AVCHD file neither of which will replay on the computer if I click on the file folder. If I copy them to a USB stick they don't replay on the HD tv either. Both play as discs on my laptop quite happily but how do I transfer them as videos to a USB
View 14 Replies View RelatedVideoStudio :: HD Video (AVCHD) - Red Eye Removal
Jun 8, 2011I used a video light in lower light conditions to take an HD video (in AVCHD) which will be rendered to PAL SD DVD. Unfortunately the main speaker has red eye. Can my VSP x3 remove this?
View 2 Replies View RelatedVideoStudio :: Convert AVCHD To AVI Before Editing In X3?
Feb 18, 2011 have a newly acquired Canon HF S21 video camera that captures footage in AVCHD. I plan on using Corel for capture and edit.
My question is for other AVCHD users. Do you use any tools to convert the files to .avi? And then edit those in VS X3 in order to aid the rendering process?
Someone refered me to Cineform Neoscene. It is a bit pricey, but here it is: [URL]
Is AVCHD really a problem in VS x3? If I convert to .avi, will I be able to render to a BD DVD later on and still retain the HD image as good as that on the original AVCHD footage?
VideoStudio :: Getting AVCHD Menu Templates?
Jul 25, 2011where to get more AVCHD disc menu templates than the 8 that come with it? I was wondering if the demo of DVD MovieFactory 7 has more and if I installed the demo if I could copy the templates over to VSX4.
View 6 Replies View RelatedVideoStudio :: Slow Processing Of AVCHD?
Dec 7, 2011why my Corel VideoStudio ProX4 program is having a hard time to run AVCHD MTS files.Seems like they are slowing my computer to a crawl.Causing the program to quite. My computer is a quad core, 3.00 GHz 4g's of ram.Lots of hard drive space.I don't understand it.
View 13 Replies View RelatedVideoStudio :: Timecode / Timestamp From AVCHD?
Jul 24, 2011To remind me when the video was taken, I'd like to have a timecode / timestamp overlaid on the video.
Per the VS X4 User Guide: To enable timecode retrieval for AVCHD
1. In the Capture Step Options Panel, click Import from Digital Media.
2. Select the thumbnail of the video file. Click Start import to launch Import Settings.
3. In Import Destination, select Insert to Timeline or select Add video date information as title.
4. Choose Entire video to import the timecode of video file to appear as a title spanning the entire duration of the video. Choose Duration to import the timecode as a title within a specified duration. Click OK to apply the settings.
VideoStudio :: Getting AVCHD Transition (blips)?
Apr 7, 2009solving the problem of brief "blips" or "jerks" following transitions in video generated by VS X2 from AVCHD clips.
Last November, I reported to Corel the problem of brief "jerks" or "blips" in AVCHD video files or hybrid discs generated by VS Pro X2 from clips created by my Sony SR11. There was a long thread here in which several Canon users stated that they had the same problem. [URL]
In addition to transitions, I also get the same blips in the video at the end of titles placed over the top of video. I am not sure whether Canon users have that problem.
Since the problem still has not been fixed, I followed up last week with Corel asking for the status of the fix for this problem. In their reply, they asked for more sample clips and asked that I post their ftp site URL where you can upload clips that will demonstrate the problem. They want clips from the various AVCHD camcorder models which are having this problem. They didn't say whether they want raw clips or VS-generated clips that contain the blip, but I suspect they want raw clips so they can try to re-create the problem on their systems.
When selecting a clip to upload, what appears to cause the problem is that at the end of a transition or title, the video jumps back one frame and then proceeds forward again. Thus two frames are repeated, which causes the "blip". You can see this by viewing the generated file frame-by-frame.
So the blip is most apparent when there is obvious, but smooth, movement in the original clip. The raw clip I sent them when I reported the problem in November was of a truck driving down a highway, moving across the screen from left to right, and was shot on a tripod to eliminate any camcorder movement. In the VS-generated video, at the end of the transition, the truck jumped backwards slightly then went forward again.
A clip containing little or no movement, or a clip that is already jerky and unsteady, will not illustrate the problem well. So please select your clip accordingly. A single object moving across the screen against a non-moving background would be ideal.
Following is the ftp site where you can upload clips.
[URL]
VideoStudio :: Pro X4 - Burn AVCHD At 1280x720p
Jan 3, 2012VS Pro X4 - I do not consider myself an expert with video editing/authoring, but I do have a fair amount of experience with capturing/editing/authoring h.264 files via a Hauppauge 1212 HD-PVR, ArcSoft Total Media Extreme, and VideoReDo. In fact, I have burned around 5,000 DVD and 2,000 AVCHD discs with outstanding results using those products, as well as editing and storing thousands more captured programs directly to HDD. Unfortunately, these products do not allow me to create Blu-ray discs, so that is why I am trying to switch over to VS X4.
My baseline for what I want from VS X4 is simply what I have been able to do with no effort at all using ArcSoft Total Media Extreme (supplied with the HD-PVR): I capture HD programing at 1280x720p 60fps using a variable bit rate (usually 7 Mbps) and AC3 audio, edit out unwanted material, add menu and chapters, then burn directly to an AVCHD disc. Using this method, I generally get a minimum of 3 hours HD material on a standard DVD5 blank, and total authoring/burning time for a disc is somewhere around 20 minutes.
My problem is that I have not been able to come anywhere close to this efficiency yet with VS X4. The .ts source files play and edit in VS X4 just fine, but then I hit a wall when I try to produce the output. There don't seem to be any default project profiles to create AVCHD 1280x720p, and even when I try to use Customize, i cannot access the needed fields, such as user defined frame size. And everything I have tried produces HUGE output files, 4 or 5 times larger than the source files!
Sample Source file MediaInfo:
ID : 0 (0x0)
Complete name : C:UsersPublicVideosInput for Edit or ResizeHoliday for Lovers 720p_7.1v.TS
Format : MPEG-TS
File size : 2.30 GiB
Duration : 1h 43mn
Overall bit rate mode : Variable
Overall bit rate : 3 166 Kbps
Maximum Overall bit rate : 18.0 Mbps
[Code] ...
