VideoStudio :: Unable To Add More Than One Project To Blu-ray Disc?
Jan 1, 2012Unable to add more than one project to a blu-ray disc
View 5 Replies
ADVERTISEMENT
Photoshop Elements :: Unable To Apply Disc Menu In 9 Project?
Jan 4, 2013When I attempt to apply the disc menu to my video project it never actually applies it to the timeline.
View 1 Replies View RelatedVideoStudio :: X4 / Fitting Video Project On 4.7G Disc?
Mar 31, 2011If my video project is to big to fit on a 4.7G disc and X4 prompt to fit it in the burn to ISO or Video TS stage, the end result have 1 or more video clips converted to heavily low quality, approximately a bit more than 3000 bit rate, but not all the video clips are converted. The end result is that some video clips have grainy scenes with some artifacts on the TV.
Since it is very time consuming to batch convert all the videos of the project to a lower bit rate in order to fit it on a 4.7G disc (choosing one bit rate specification, see if all videos plus menus fit, choose another lower bit rate and start batch converting again if not...), I decided to use the 8.5G option of X4 with the original quality formerly rendered videos and finish the dvd building in that way. After that I choose DVD Shrink 3.2 to compress it on 4.7G. DVD Shrink successfully compress a 5.2G project DVD to 4.7G (actually 4.4G) with a 95% compression rate with a sharp function. The overall end result's playback quality was far more better than when using batch convert to a lower bit rate with X4. Just want to mention that X2 handled such a compress to fit request better.
The last time I've needed to go the DVD Shrink way for compressing large DVD sizes were in the days of VS 11. By mentioning VS11, that was also the time when I got several crashes with DVD authorizing. I remember I had to set VS 11 to convert all DVD compliant MPEG again to have a smooth playback without Video/Audio multiplexing problems.I always use formerly rendered MPEG2 files. I never use the edited project to author a DVD.
VideoStudio :: Pro X4 Missing Project File On Disc
Aug 13, 2013I am successfully creating a DVD using the Create Disc (DVD) option under the Share menu. I am adding multiple Project files that I have created (.VSP) files to it. Once it is all set up, I select Burning Options add Copyright Information and then I have also clicked on the add Project File to the disc option. However once the disc is created, I cannot find the Project File (.VSP) on the disc.
I am using VideoStudio Pro X4 with all the patches to SP3 installed. PAL system, and I am not receiving any errors.
Am I missing something simple? Does the Project File added to the disc not use the same file extension?
VideoStudio :: Project Size / Resulting Disc Keeps Stopping
Apr 20, 2013I have been having a lot of trouble with a project that is about 4.96GB to burn to disc. I have adjusted the MPEG rate so that the project is much smaller, but when I burn it from the video file, the resulting disc keeps stopping when I play it on my DVD player. On my computer, it goes almost to the end but then the audio and video keep "catching" for about the last three minutes of the 1 hour 11 minutes. I am currently trying to create a video disc of part of the project, but it has reached 99% of rendering and then hung for several minutes. The task manager tells me that Videostudio was not responding. It has now finished.
View 7 Replies View RelatedVideoStudio :: Saved Rendered Project In Library - Create Disc In X5
Sep 28, 2012I have somehow managed to save a rendered project in another projects library.In the share tab I cant find a way of browsing to this rendered (vsp.mpg) file in order to open it and continue in the create disc process.
View 5 Replies View RelatedVideoStudio :: X5 - Unable To Share Project In Any Way
Jun 6, 2013I'm running VideoStudio Pro X5. I spent all day yesterday on a little project and wanted to get it to youtube afterward. Unfortunately, none of my share options seem to be working! I've tried creating a disc, creating a video file, and uploading directly to youtube, but after everytime I try, I get an error message and VideoStudio closes out. I tried with the demo of X6 as well. The error message says APPCLOSE and gives the dump file, I believe.
View 2 Replies View RelatedVideoStudio :: Unable To Adjust Playback Speed In Project View
Jan 5, 2011I don't know why Corel made this program without the ability to change the playback speed in project view. You can only change the speed on each clip. When you have 50 or more clips, this can take all day, when it could take a few seconds if you can do it in project mode.
View 10 Replies View RelatedVideoStudio :: Instant Project Templates - Unable To See Import Icon
Apr 23, 2011I have downloaded few instant project templates Yet when I go to the Instant project window I do not see the import Icon . I only see the orange Icon(get more content). Is there something wrong with the installation of my VSPro x3.
View 1 Replies View RelatedVideoStudio :: Create Smart Package From Project File That Has Smaller Component Project Files?
Aug 22, 2011I've built a project up with several smaller project file components. It's an easier way to create a video than editing one big project.
Opening the overall project and running it on screen is not a problem. However, when I try to create a smart package of the composite project, I get a consistent error message rejecting the process because of the existence of the component vsp's.
Is there a way to avoid the error and create a smart package from a project file that has smaller component project files?
Photoshop :: Unable To Activate CS2 Despite Correct Numbers And Disc
Oct 20, 2013Unable to activate Photoshop CS2 despite correct numbers and disc.
View 1 Replies View RelatedPhotoshop Elements :: Unable To Print Directly To Disc
Mar 17, 2014I've used Elements in the past, last one being Elements 8. now with E12, i'm unable to print directly to a disc. ive looked under the 'printer setting' ' paper size' ' type of printer' and nothing says CD/DVD or 80mm or 120mm.
View 3 Replies View RelatedCorelDRAW Graphics Suite X3 :: Unable To Open Disc 3 To Add Fonts
Oct 18, 2011this is a problem that arose after repairing the previous issue, downloading the MSXML4 SP3 pack...now I can't use some fonts I purchased, open face fonts. After redownloading from supplier, issue is still not resolved.Also, I am unable to open disc 3 of Corel X3 to add fonts.
View 1 Replies View RelatedVideoStudio :: Burning Blu-ray Disc With X3?
Jan 10, 2011I've been trying to find the right tool for this job for over a year (Premiere Elements, Cyberlink, Corel, etc.) and in some way or another, they all let me down (usually during the rendering process). I have an LG Blu-ray burner I bought a year ago (all my software is up to date with the latest device drivers). I have created one blu-ray disc, a very simple one as a test and it works, but I can't remember the software I used. This weekend I tried using VideoStudio pro X3. When I went to the Share tab and clicked create disc, it launch dvd factory 2010 (I think) and blu-ray was not a format choice. I made sure my version (although trial) was fully up to date with all the latest updates.
View 6 Replies View RelatedVideoStudio :: Pro X2 Does Not Create Disc?
Nov 18, 2010Operating System: Win Vista Home
32 bit or 64 bit: 64bit
Motherboard: Unknown (HP Pavilion m9350f)
Processor: AMD Phenom 9850 Quad
Ram: 6GB
Video Card:
Sound Card:
Hard Drive Capacity: 750GB
System Drive:
I have VideoStudio Pro X2. Purchase late last year to create a 50th wedding anniversary video for my parents. Worked great, able to mix video, add music, able to copy to DVDs, etc.
I haven't opened it for a while, until today. I tried to make another copy of the video on a DVD tonight, the window pops up, it says the video is loading, but the video never comes up. When I try to click on the popup (anywhere), it says the program stopped working and MS will shut it down (gives me the option to shutdown or continue).
I downloaded SP1 as well. Still same issue.
The video will play fine in the edit mode. I tried to copy another video compilation that I made a year ago (same timeframe) and it worked fine.
VideoStudio :: DVD Disc Templates
Apr 18, 2011I've read several topics here on the Instant Project templates. I'm working my way through the VS Pro X4 trial and about to purchase it just have a couple of remaining questions.
The trial I'm using has a very limited set of DVD templates for use when burning a DVD disc. I assume these are different than the Instant Project templates that I've read about here?
If they are different than the Instant Project templates are there DVD templates for download? I assume they're only available for a fully licensed install?
VideoStudio :: X4 / How To Import Blu-ray Disc
Nov 29, 2011I'm using the currently the VS X4 trial version for evaluation purpose. So first I want to modify a BluRay-Disc in 3 Steps:
- import material from disc
- cut some scenes
- re-create disc (or finally burn it)
Unfortunateley I'm unable to finish task one: I didn't found out, how to import the BluRay-Disc: I tried with 'import Digital-Media' but whatever I choose in selection dialog (drive where the disc is located, a dubdirectory from the disc, etc.), VS always respond 'No valid content found'.
How can I accomplish to import the movie materials from the BluRayDisc?
VideoStudio :: Create Disc In Pro X4
Jul 26, 2011I currently have the trial version of Video Studio Pro X4. I would like to purchase it if I can complete a project and burn to DVD. I was able to create and edit a video of a recent concert at our church that looks great. I went through the steps of Create Disc and burn to DVD of the 2 Hour video (It took over 12 Hours to burn). The DVD seems to play on the computer with no problem, but when I try to play it on a DVD player attached to the TV, it says there is no disc, the player does not recognize the DVD. I used a Memorex DVD+R DL 8x 8.5GB 240 Min. (double layer). I have promised many people I would provide them a DVD of the concert. What do I need to do to produce a DVD that will play on a DVD player through the TV?
View 9 Replies View RelatedVideoStudio :: How To Create Disc
Oct 28, 2010I have a short project to burn to DVD. I have it in AVCHD format as well as downconverted for standard DVD. This is my normal procedure, so that I can burn a high def disc for myself, and a standard disc for friends and family. I have done this many times before, but this time, whether AVCHD or standard DVD, I get "Unspecified error" when I hit the burn button. I am observing best practice - there is nothing in the timeline, and the settings (the little gear icon) match the video clip. This piece is only about 8 mins long - much shorter than my normal pieces, but I can't see that would make a difference.
I considered burning them in Roxio or Power2Go, but both programs insist on including Menus, which I definitely don't want.
VideoStudio :: How To Make ISO Instead Of Burn Disc
Sep 7, 2012My Videostudio is in Chinese(I hate it but no choice in HK shops), so sometime is hard for me to understand how to do this and that!
I see some topic said I can try to make a ISO first instead of using the burn function, I try to output the project to a videso and a m2t file come out, I getting confuse now, how can I make the ISO file, by using the create video file? or create a disc? I have different project all put in one disc, if I burn the ISO, still have the menu?
VideoStudio :: Looping Blu-ray Disc Video?
Nov 23, 2010I need to make a blu ray disc that continuously plays/loops for a trade show booth display.
View 3 Replies View RelatedVideoStudio :: Burn Disc From Image Using X4
Oct 10, 2013I have created disc images of some projects. The 'share' option allows for making disc images but I can't see how to burn a disc from the image using VS X4.....the 'create disc' section does not seem to accept an image for burning.
View 3 Replies View RelatedVideoStudio :: X4 - Create Blu-ray Disc Image?
Aug 3, 2011I tried to create an ISO image (I don't have a blu-ray drive) and it turns out it isn't possible (the "create image" option is diabled on blu-ray disks).I was able to create the folders.
View 8 Replies View RelatedVideoStudio :: How To Burn Blu-Ray Disc From Blu-Ray Folder
May 27, 2013I have rendered the AVCHD video files (Full HD video) in Video Studio Ultimate X5, and under the "Share | Create Disc" option I created the files to Folder instead of burning directly to Disc as I wanted to save the "Folder" for future Blu-Ray disc burning if needed.
The question is, after the files are created in Folder what is the proper procedure to burn the "Folder" onto a Blu-Ray disc so that the disc will be playable in a Blu-Ray player?
VideoStudio :: Rendering And Disc Burning
Feb 7, 2013I am evaluating videostudio 5 and intended to purchase it. However, when I try to burn a disc (br) or render a file, I get the dmp file error message. It tells me to contact corel tech support, but that is impossible. I really like the program, but this is a "show stopper" from purchasing it.
View 2 Replies View RelatedVideoStudio :: X3 - Burn Two Projects To 1 Disc?
Mar 16, 2011I have created two projects within Video Studio X3, which I want to put on one disc as separate programs, so they can be viewed individually (they are the same subject but covering different time spans) how do I achieve this ?
View 2 Replies View RelatedVideoStudio :: X5 Using Disc Image Files?
Dec 4, 2013I created dvd using VSP projects files and saved also as "create disc image". Now I want to make another dvd using the saved disc image but I can't find it on my PC. I think it is saved as .iso file in a folder. In my search I could find the file but it is in Audio and Video two separate files. I can not open to make dvd. I had labeled with name and date still I can't find it. how to find these files and create dvd disk. I want to save all my dvd projects disc images in one folder with each project name and date created so I can go to my PC HD and locate it. Also, can I save Blue ray disc projects and make copy later?
If these projects when burned and saved with .iso format then Roxio or any other software can burn the dvd or Blue Ray discs by opening the saved .iso files.
VideoStudio :: AVCHD Disc With DVD Content
Apr 8, 2011With X4, can you author an AVCHD disc with 720x480 content in H.264 video and AC3 Audio and burn it to a DVD that would be playable in a Blu-Ray player? Because my thought was with an 8.4 DVD disc you could fit a lot more TV shows on one disc, vs backing them up in DVD in Mpeg2 format. In fact with a 25GB Blu-Ray blank, you could probalby get a whole 22 episode season on one disc.
View 1 Replies View RelatedVideoStudio :: Burn Movie To Disc?
Sep 8, 2011How do you burn a movie to a dvd disc? I created my movie, then clicked share tab. DVD factory 2010 opened up and I created my menu. After 3 hours of converting file the burn said failed with no explaination. So I then made a file of the movie. Opened vs3 again and tried to burn the saved file which was an mpg format to disc. The program doesn't recognize mpg files only vsp files. The program made the mpg file. So how do I burn the mpg file to disc?
View 3 Replies View RelatedVideoStudio :: Burning DVD After Creating Disc Image
Aug 22, 2012I'm using X5Pro, and have just rendered a project that will be about 1.6Gb including menus. Because I will need to make several disks of the result, I used the create disk image (user guide p156) option in the last panel of the authoring process, rather than burn a disk directly. What I got in the specified folder was a small .iso control file and a winzip compressed archive.
First question: why do it like that? Extraction of that archive to the same folder as the .iso file yields a Video_TS folder containing a series of .bup, .ifo and .vob files.
I ran the iso file with an iso DVD burner program I have. Generally it works on whole .iso files - one humongous file that it breaks apart into the relevant items and burns the DVD in a playable way. As, for example, Mscrosoft's SP3 package for XP - distributed by download and in that format. The burn ISO program ran and it created something like 100kb on the DVD. Something is wrong here.
Second question: Since there isn't a tutorial on how to use this function on-line, is there a document available which describes the correct procedure to create a burned DVD from the created disk image generated by X5?
VideoStudio :: 10 SE - Create Disc Window / No Next Button Appear
Nov 19, 2010The problem that i have, is that it does not appear the "next" button in the windows "Create Disc". How can i solve. With this problem i can not burn the project.
OS: Windows 7 64bit