VideoStudio :: Looping Blu-ray Disc Video?

Nov 23, 2010

I need to make a blu ray disc that continuously plays/loops for a trade show booth display.

View 3 Replies


ADVERTISEMENT

VideoStudio :: Prevent Looping Video

Nov 30, 2011

Is there a setting , when you create a video file, that will prevent looping? The player has looping turned off but, it still loops. I burn with Img burn and I could find no setting for it.

View 1 Replies View Related

VideoStudio :: Preventing Looping In Video Playback?

Nov 29, 2012

All the videos I've produced with VS Pro X5 have a tendency to "loop" back to the beginning and replay...

how to prevent that?

View 4 Replies View Related

VideoStudio :: X5 - Looping Video On Thumb Drive

Oct 23, 2013

I'm in the middle of preparing a couple videos for an event in less than 2 weeks. One will be played on a larger LCD or plasma TV. The person in charge of that stuff at the hotel suggested I put that video on a thumb drive and that it could be looped. But now I find out that I have to set that parameter myself. So far, I can only see that it can be done when you burn the DVD. I just tried it and it works fine.

So, my question is, how can I burn the same video, to a thumb drive to accomplish the same end? Is that possible?

BTW, I'm using VP Pro X5 Ultimate on a PC.

View 7 Replies View Related

VideoStudio :: X4 / Fitting Video Project On 4.7G Disc?

Mar 31, 2011

If my video project is to big to fit on a 4.7G disc and X4 prompt to fit it in the burn to ISO or Video TS stage, the end result have 1 or more video clips converted to heavily low quality, approximately a bit more than 3000 bit rate, but not all the video clips are converted. The end result is that some video clips have grainy scenes with some artifacts on the TV.

Since it is very time consuming to batch convert all the videos of the project to a lower bit rate in order to fit it on a 4.7G disc (choosing one bit rate specification, see if all videos plus menus fit, choose another lower bit rate and start batch converting again if not...), I decided to use the 8.5G option of X4 with the original quality formerly rendered videos and finish the dvd building in that way. After that I choose DVD Shrink 3.2 to compress it on 4.7G. DVD Shrink successfully compress a 5.2G project DVD to 4.7G (actually 4.4G) with a 95% compression rate with a sharp function. The overall end result's playback quality was far more better than when using batch convert to a lower bit rate with X4. Just want to mention that X2 handled such a compress to fit request better.

The last time I've needed to go the DVD Shrink way for compressing large DVD sizes were in the days of VS 11. By mentioning VS11, that was also the time when I got several crashes with DVD authorizing. I remember I had to set VS 11 to convert all DVD compliant MPEG again to have a smooth playback without Video/Audio multiplexing problems.I always use formerly rendered MPEG2 files. I never use the edited project to author a DVD.

View 12 Replies View Related

VideoStudio :: X4 - Render Or Burn 3D Video File Onto BD Disc?

Dec 30, 2011

(1) whether VS Pro X4 will support the 3D video clip taken from Panasonic HDC-SDT750 3D capable camcorder?

(2) If it is supported by VS Pro X4, how do you render or burn the 3D video file onto BD disc so that it would be recognised as a 3D video format disc and playable in a 3D Blu-ray player?

View 2 Replies View Related

VideoStudio :: Copying Pre-recorded Video Clips Onto DVD-R Disc / Resolution Settings

Feb 1, 2012

I have been copying a number of pre-recorded video clips onto a DVD-R disc and playing them on my DVD recorder. As my Panasonic DMR-XW380 DVD recorder only plays DivX or XviD video files I have to convert the files I have to this format.

We have a Sony Bravia 40" TV and I was wondering about the best settings I should use for the Frame Resolution and bitrate etc. When I render anything to DivX with VS I use a Frame Resolution of 720 x 576 and a bitrate of 56kbps and this seems to play okay in my setup. Do you think these settings could be improved?

View 11 Replies View Related

VideoStudio :: No Audio Sound When Video File Saved And Burn On DVD Disc

Apr 19, 2012

When the video file is saved and burn on DVD disc and play on a DVD player, only the images appear on the TV screen but there is no sound coming out from the speakers. I'm using Studio Pro X4

View 7 Replies View Related

After Effects :: Create Seamlessly Looping Video?

Sep 13, 2013

I have a Video assets and I would need to make Seamlessly Looping of this, for it

View 2 Replies View Related

VideoStudio :: X3 - Looping Music Tracks?

Jan 22, 2013

I have Videostudio Pro X3 and how to loop a music track? I have a 25 second long music clip but need it to stretch out for 2-3 minutes.

View 2 Replies View Related

VideoStudio :: Burning Blu-ray Disc With X3?

Jan 10, 2011

I've been trying to find the right tool for this job for over a year (Premiere Elements, Cyberlink, Corel, etc.) and in some way or another, they all let me down (usually during the rendering process). I have an LG Blu-ray burner I bought a year ago (all my software is up to date with the latest device drivers). I have created one blu-ray disc, a very simple one as a test and it works, but I can't remember the software I used. This weekend I tried using VideoStudio pro X3. When I went to the Share tab and clicked create disc, it launch dvd factory 2010 (I think) and blu-ray was not a format choice. I made sure my version (although trial) was fully up to date with all the latest updates.

View 6 Replies View Related

VideoStudio :: Pro X2 Does Not Create Disc?

Nov 18, 2010

Operating System: Win Vista Home
32 bit or 64 bit: 64bit
Motherboard: Unknown (HP Pavilion m9350f)
Processor: AMD Phenom 9850 Quad
Ram: 6GB
Video Card:
Sound Card:
Hard Drive Capacity: 750GB
System Drive:

I have VideoStudio Pro X2. Purchase late last year to create a 50th wedding anniversary video for my parents. Worked great, able to mix video, add music, able to copy to DVDs, etc.

I haven't opened it for a while, until today. I tried to make another copy of the video on a DVD tonight, the window pops up, it says the video is loading, but the video never comes up. When I try to click on the popup (anywhere), it says the program stopped working and MS will shut it down (gives me the option to shutdown or continue).

I downloaded SP1 as well. Still same issue.

The video will play fine in the edit mode. I tried to copy another video compilation that I made a year ago (same timeframe) and it worked fine.

View 4 Replies View Related

VideoStudio :: DVD Disc Templates

Apr 18, 2011

I've read several topics here on the Instant Project templates. I'm working my way through the VS Pro X4 trial and about to purchase it just have a couple of remaining questions.

The trial I'm using has a very limited set of DVD templates for use when burning a DVD disc. I assume these are different than the Instant Project templates that I've read about here?

If they are different than the Instant Project templates are there DVD templates for download? I assume they're only available for a fully licensed install?

View 2 Replies View Related

VideoStudio :: X4 / How To Import Blu-ray Disc

Nov 29, 2011

I'm using the currently the VS X4 trial version for evaluation purpose. So first I want to modify a BluRay-Disc in 3 Steps:

- import material from disc

- cut some scenes

- re-create disc (or finally burn it)

Unfortunateley I'm unable to finish task one: I didn't found out, how to import the BluRay-Disc: I tried with 'import Digital-Media' but whatever I choose in selection dialog (drive where the disc is located, a dubdirectory from the disc, etc.), VS always respond 'No valid content found'.

How can I accomplish to import the movie materials from the BluRayDisc?

View 3 Replies View Related

VideoStudio :: Create Disc In Pro X4

Jul 26, 2011

I currently have the trial version of Video Studio Pro X4. I would like to purchase it if I can complete a project and burn to DVD. I was able to create and edit a video of a recent concert at our church that looks great. I went through the steps of Create Disc and burn to DVD of the 2 Hour video (It took over 12 Hours to burn). The DVD seems to play on the computer with no problem, but when I try to play it on a DVD player attached to the TV, it says there is no disc, the player does not recognize the DVD. I used a Memorex DVD+R DL 8x 8.5GB 240 Min. (double layer). I have promised many people I would provide them a DVD of the concert. What do I need to do to produce a DVD that will play on a DVD player through the TV?

View 9 Replies View Related

VideoStudio :: How To Create Disc

Oct 28, 2010

I have a short project to burn to DVD. I have it in AVCHD format as well as downconverted for standard DVD. This is my normal procedure, so that I can burn a high def disc for myself, and a standard disc for friends and family. I have done this many times before, but this time, whether AVCHD or standard DVD, I get "Unspecified error" when I hit the burn button. I am observing best practice - there is nothing in the timeline, and the settings (the little gear icon) match the video clip. This piece is only about 8 mins long - much shorter than my normal pieces, but I can't see that would make a difference.

I considered burning them in Roxio or Power2Go, but both programs insist on including Menus, which I definitely don't want.

View 3 Replies View Related

VideoStudio :: How To Make ISO Instead Of Burn Disc

Sep 7, 2012

My Videostudio is in Chinese(I hate it but no choice in HK shops), so sometime is hard for me to understand how to do this and that!

I see some topic said I can try to make a ISO first instead of using the burn function, I try to output the project to a videso and a m2t file come out, I getting confuse now, how can I make the ISO file, by using the create video file? or create a disc? I have different project all put in one disc, if I burn the ISO, still have the menu?

View 8 Replies View Related

VideoStudio :: Unable To Add More Than One Project To Blu-ray Disc?

Jan 1, 2012

Unable to add more than one project to a blu-ray disc

View 5 Replies View Related

VideoStudio :: Burn Disc From Image Using X4

Oct 10, 2013

I have created disc images of some projects. The 'share' option allows for making disc images but I can't see how to burn a disc from the image using VS X4.....the 'create disc' section does not seem to accept an image for burning.

View 3 Replies View Related

VideoStudio :: X4 - Create Blu-ray Disc Image?

Aug 3, 2011

I tried to create an ISO image (I don't have a blu-ray drive) and it turns out it isn't possible (the "create image" option is diabled on blu-ray disks).I was able to create the folders.

View 8 Replies View Related

VideoStudio :: How To Burn Blu-Ray Disc From Blu-Ray Folder

May 27, 2013

I have rendered the AVCHD video files (Full HD video) in Video Studio Ultimate X5, and under the "Share | Create Disc" option I created the files to Folder instead of burning directly to Disc as I wanted to save the "Folder" for future Blu-Ray disc burning if needed.

The question is, after the files are created in Folder what is the proper procedure to burn the "Folder" onto a Blu-Ray disc so that the disc will be playable in a Blu-Ray player?

View 2 Replies View Related

VideoStudio :: Rendering And Disc Burning

Feb 7, 2013

I am evaluating videostudio 5 and intended to purchase it. However, when I try to burn a disc (br) or render a file, I get the dmp file error message. It tells me to contact corel tech support, but that is impossible. I really like the program, but this is a "show stopper" from purchasing it.

View 2 Replies View Related

VideoStudio :: X3 - Burn Two Projects To 1 Disc?

Mar 16, 2011

I have created two projects within Video Studio X3, which I want to put on one disc as separate programs, so they can be viewed individually (they are the same subject but covering different time spans) how do I achieve this ?

View 2 Replies View Related

VideoStudio :: X5 Using Disc Image Files?

Dec 4, 2013

I created dvd using VSP projects files and saved also as "create disc image". Now I want to make another dvd using the saved disc image but I can't find it on my PC. I think it is saved as .iso file in a folder. In my search I could find the file but it is in Audio and Video two separate files. I can not open to make dvd. I had labeled with name and date still I can't find it. how to find these files and create dvd disk. I want to save all my dvd projects disc images in one folder with each project name and date created so I can go to my PC HD and locate it. Also, can I save Blue ray disc projects and make copy later?

If these projects when burned and saved with .iso format then Roxio or any other software can burn the dvd or Blue Ray discs by opening the saved .iso files.

View 5 Replies View Related

VideoStudio :: AVCHD Disc With DVD Content

Apr 8, 2011

With X4, can you author an AVCHD disc with 720x480 content in H.264 video and AC3 Audio and burn it to a DVD that would be playable in a Blu-Ray player? Because my thought was with an 8.4 DVD disc you could fit a lot more TV shows on one disc, vs backing them up in DVD in Mpeg2 format. In fact with a 25GB Blu-Ray blank, you could probalby get a whole 22 episode season on one disc.

View 1 Replies View Related

VideoStudio :: Burn Movie To Disc?

Sep 8, 2011

How do you burn a movie to a dvd disc? I created my movie, then clicked share tab. DVD factory 2010 opened up and I created my menu. After 3 hours of converting file the burn said failed with no explaination. So I then made a file of the movie. Opened vs3 again and tried to burn the saved file which was an mpg format to disc. The program doesn't recognize mpg files only vsp files. The program made the mpg file. So how do I burn the mpg file to disc?

View 3 Replies View Related

VideoStudio :: Burning DVD After Creating Disc Image

Aug 22, 2012

I'm using X5Pro, and have just rendered a project that will be about 1.6Gb including menus. Because I will need to make several disks of the result, I used the create disk image (user guide p156) option in the last panel of the authoring process, rather than burn a disk directly. What I got in the specified folder was a small .iso control file and a winzip compressed archive.

First question: why do it like that? Extraction of that archive to the same folder as the .iso file yields a Video_TS folder containing a series of .bup, .ifo and .vob files.

I ran the iso file with an iso DVD burner program I have. Generally it works on whole .iso files - one humongous file that it breaks apart into the relevant items and burns the DVD in a playable way. As, for example, Mscrosoft's SP3 package for XP - distributed by download and in that format. The burn ISO program ran and it created something like 100kb on the DVD. Something is wrong here.

Second question: Since there isn't a tutorial on how to use this function on-line, is there a document available which describes the correct procedure to create a burned DVD from the created disk image generated by X5?

View 3 Replies View Related

VideoStudio :: 10 SE - Create Disc Window / No Next Button Appear

Nov 19, 2010

The problem that i have, is that it does not appear the "next" button in the windows "Create Disc". How can i solve. With this problem i can not burn the project.

OS: Windows 7 64bit

View 10 Replies View Related

VideoStudio :: Movie On DVD Disc Plays Non-stop?

Oct 18, 2013

Using Video Studio Pro X5, I edited a home video and saved my project into vsp file. When I previewed the video, it looked fine. I clicked Share, Create Disc, chose DVD, click Next, Next, Output, chose Create to Disc, and clicked Burn icon at the bottom right. It rendered for a while and completed.

When I played the DVD, the movie loops (meaning it played to the end of 15-minute video clip and did not stop, it went back to the beginning and played again and again)

View 1 Replies View Related

VideoStudio :: Minimize Disc Burning Procedure In X4?

Aug 28, 2012

Is it possible to minimize the disc burning procedure in Vs x4 to allow other programs to be run?

View 2 Replies View Related

VideoStudio :: Open Disc Image File To See What Is On It?

May 28, 2013

Is it possible to open a disc image file to see what is on it, or can it only be used for burning a DVD

View 4 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved