Is there a setting , when you create a video file, that will prevent looping? The player has looping turned off but, it still loops. I burn with Img burn and I could find no setting for it.
View 1 RepliesI need to make a blu ray disc that continuously plays/loops for a trade show booth display.
View 3 Replies View RelatedAll the videos I've produced with VS Pro X5 have a tendency to "loop" back to the beginning and replay...
how to prevent that?
I'm in the middle of preparing a couple videos for an event in less than 2 weeks. One will be played on a larger LCD or plasma TV. The person in charge of that stuff at the hotel suggested I put that video on a thumb drive and that it could be looped. But now I find out that I have to set that parameter myself. So far, I can only see that it can be done when you burn the DVD. I just tried it and it works fine.
So, my question is, how can I burn the same video, to a thumb drive to accomplish the same end? Is that possible?
BTW, I'm using VP Pro X5 Ultimate on a PC.
I have a Video assets and I would need to make Seamlessly Looping of this, for it
View 2 Replies View RelatedI have Videostudio Pro X3 and how to loop a music track? I have a 25 second long music clip but need it to stretch out for 2-3 minutes.
View 2 Replies View RelatedI get this error whenever I try to start the trial of VSx5 (Funny thing is, I am trying it because Pinnacle 15 is far too crashy for me.)
View 4 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View RelatedIs there any way to push the video in the video track after the title track is completed ....
View 4 Replies View RelatedI use CS5 + Windows 7, and I would like to make looping gifs from .mp4/.avi clips. I make sure that I set looping to ''forever'', and that I save the file as a gif. once I upload it to a site on chrome(like imageshack and tumblr), the image always stops animating or doesn't animate at all. I've tried uploading the image on Firefox, and it looped forever on the image's direct link on imageshack. But when I upload the image to tumblr on either browsers, either from my files or the imageshack link, it still stops looping. When I go to a tumblr page to mass-delete posts, a gif that has a smaller size than an older gif(this one doesn't animate at all anymore) does loop. Every other gif on the whole site I haven't made always loop.
View 2 Replies View Relatedin the latest version of Adobe Photoshop CS6 when creating an animated GIF via the Save for Web dialog box; there is a looping option section that allows your animation to loop forever, or once...
In the previous version, it would remember which setting you selected for subsequent saves. In this new version, it forgets it and always defaults to ONCE; where I want FOREVER... making me forget to check it sometimes, when I'm working fast; and create animations that stop after one loop...
I have created a successful 24 frame animation gif using Photoshop layers and putting them into timeline. I have saved it for web, and checked the Once option. I have checked the looping option to 'Once', but when I play it or place it in an email it loops forever. It only plays once when I open it in the web browser, or when I preview it in Photoshop.
View 4 Replies View RelatedBeen meaning to make some more videos. Here's one I made today pertaining to looping.
[URL].........
[URL]......
[URL].........
I was wondering if when I stop a looping clip playing in my timeline, I could have it stop at the frame I stop on instead of stopping at the positioner or in-point. This is a very vital problem I'm having.
I have come up with a work-a-round but it doesn't work near as smoothly as I would like it to.
All I do for the workaround is instead of hitting space when I stop, I hit right alt to set an in point then hit space to stop and "A" to move to my newly created in-point. But it doesn't work as smoothly as it should. I would really like it to perform like playing a clip in the desktop works. It just loops around and when I stop, it actually stops.
I had a green screen clip. Keyed out the green in PPro and exported as an flv alpha channel to get transparent background. When I put the flash file on a webpage it keeps looping. How can I set the output in PPro to autoplay (which it does now) but stop after it has played through once?
View 1 Replies View RelatedIs there a way to set 20 fps for my video in corel video studio x3 ?
i made a 3d animation and rendered about 3000 single frames as .bmp . Now i want to put them together to a video. the speed of the animation is preset, so i need every frame to show up for 0.05 second..... 20 fps not 15, not 24, not 25 and not 29.97, but exactly 20 fps. i don't know if i am just very stupid, but i can not find the settings for this.
I need to loop through the user defined properties and create a list. I can create the lost but I can't find a way of looping through the defined properties. I can get property values but only if I know the name.
I need to loop through without knowing the UD name. Is there a way to recursively loop through all of the user defined properties?
I wrote a lisp, that grabs all text and assigns it a variable. Here's what it looks like:
(setq numbers (ssget "_X" (list (cons 0 "TEXT") (cons 1 "*")) ))
(sslength numbers)
(setq numb1(ssname numbers 0))
(setq enlist1 (entget numb1))
(setq texty (fix (caddr(assoc 10 enlist1))))
(setq value1 (cdr(assoc 1 enlist1)))
In this case length returns a value of 20. I can repeat this command 20 times and have all these variables but I don't think that is the best way. I do need the "y" value insertion point of the text. Line numbers are very important with what I do.In the end what I want to do is
1. sort through how ever many values sslength returns.
2. compare a blocks attribute "y" value insertion point with that of all the text values.
3. If both y values are equal then that blocks "tag name" will be changed.
Here is what I am doing on the block end with for reference:
(if (= texty fuwhole)
(setq funum1 (subst (cons 1 (strcat "FU" value1)) (assoc 1 funum1) funum1))
(entmod funum1)
)
fuwhole is the blocks "y" value insertion point.
funum1 is the blocks dxf group code
I am using AutoCAD 2011. I have a lisp that I have created/modified.
What it does:
Allows me to Select a layer that I call out and change its color properties back to bylayer.
(i primarily use this when i am cleaning up my drawings, I turn them all to gray with another command i have then i run this one to find all the entities on that specified layer)
What i am trying to do:
I would like this command to do a loop. So say i type in a layer name that does not exist, instead of running through the rest of the command i want it to revert back to "specify layer name" until the correct name is entered for that layer.
Here is the lisp:
(defun cLL ()
(setq varLayer (getstring t "
Specify Layer Name: "))
(sssetfirst nil (ssget "X" (list (cons 8 varLayer))))
(command "change" "p" "" "p" "c" "bylayer" "")
(princ)
First when I try d extrude front faces they don't stick together, even though "keep faces together" is checked [URL]........
but I click on the little round icon in the middle before extruding and they kinda stay together . When I try to insert a edge loop, it dosnt loop, but looks something like this [URL]........and when I let go of mouse button it gives some strange edges [URL].......
With the installation of SP1 (VSX4), the options to create a blu-ray video file (assuming 1920x1080 only, though the same options exist for 1440x1080) are now:
Blu-ray (1920 x 1080)
Blu-ray H.264 (1920 x 1080P)
Blu-ray H.264 (1920 x 1080)
Now, I want to create a 'standard' Blu-ray disc of family videos. My camera is a Canon Vixia HF20, recording in 1920x1080 in the '60i' mode. The camera creates AVCHD formatted files. I know I don't want the progressive option, however, what is the difference between the other two options (is it MEG4 vs. AVCHD? If so, what should I choose when creating a new disc?). I want my disc to support as many blu-ray players and HDTV's as possible since I will be giving copies to various family members (meaning I don't want a format that supports only the latest releases of blu-ray players).
Can it actually be done? If I so much as drop 3D file onto the timeline and tag it as 3D (SBS L-R in my case), I get the "... lost 3D attributes..." message when I try to create a 3D file. I tried tagging a 2D file as 3D for S&Gs and got the same result. In case it matters, the files are in .avi format (and even rendering a 2D version of these makes a jumpy video, but I digress...).
View 9 Replies View RelatedIs there anyway to convert the video to 4:3. When I save it 4:3 file it doesn't cut it down. It makes the video look back. Can I cut the outside edges to make the video 4:3?
View 3 Replies View RelatedI just purchased Video Studio Pro X3 and I love it . In my opinion it is possible to capture video from the video camera. I have a JVC HD camera
This the camera I purchased.
[URL]......
I would like to hook my camera up to my computer
[URL]........
How do I do this. Now of course my camera records off an SD card and I can just stick it in there and edit. The reason I am hoping I can capture video just like I can with a webcam is because the view screen on my camera no longer functions so therefore I can only point in my general direction and center up the shot in post edit.
When I record in 720p @ 30 FPS my raw files are usually around 30-35kbit rate, however whenever I compress the videos they seem to drop to around 18k bitrate which really put my videos below the standard I want. I've tried to add my own compression templates but whatever I do, I can't seem to get any of the compression options above 20.000 bitrate.
I have tested with Sony Vegas and with that I can pretty much choose myself what bitrate I want it to be. Although I know Corel a lot better and its easier for me to do what I want with it.
- How can I compress my files with higher bitrate? I want it around 30.000k.
Is it me or am I really seeing that X5 has LESS video encoding options vs X4? Really? I remember having lots of choices and options as far as how to encode MP4 the size (or ratio, etc 720 vs 1080p)
I can't seem to get 1080p but I can get 720p but in X4 I recall I could do 1080p for MP4 though.
I'm new to video editing and am using video studio Pro X3, everytime I edit some video or want to use a clip. The trimmed video always flashes the first frame at the start and finish of the trimmed clip. Also when I add a subtitle or text in the time line, that first frame flashes by at the beginning and end of of the text. This is very annoying and doesn't look very good in the project. How can I remove this first frame and how do I prevent it in the first place??
View 1 Replies View RelatedI have been having a beast of a time trying to find a program that will support the files from my new camera. It records in 1920 by 1080 30fps .MOV. Windows movie maker and my old adobe program will not recognize this video I have recorded. Does corel pro x4 is capable of importing and editing this footage? Would love to know before I purchase. I am not looking to convert the video either, I have tried that and it has really hurt the quality.
View 4 Replies View RelatedI have a video clip in 4:3 format that I want to insert in a video project in 16:9 (project properties set at 16:9). How could I do that?
I know that there will be black bands above and below the converted project. However, when I inserted the 4:3 video clip in the 16:9 project, it stays in 4:3.
Am trying to rotate a MPG video taken with an original aspect ratio of 16:9 in portrait mode ie long side vertical. The video loads into Videostudio fine, ie the image is sideways-on as expected and there are the black bars at top and bottom in the edit window as is usual for 16:9 videos. If I use the rotate button, this does rotate the video, but there are now black bars down the left/right sides as well as top and bottom, and the viewable image looks 4:3 (?) - it is flattened ie people look short and fat. Is there a particular project property/create video setting I need to set. I don't understand the settings - I'ver tried things like 'non-square pixel rendering' without knowing what to expect - but nothing so far seems to work.
View 4 Replies View Related