I have created a successful 24 frame animation gif using Photoshop layers and putting them into timeline. I have saved it for web, and checked the Once option. I have checked the looping option to 'Once', but when I play it or place it in an email it loops forever. It only plays once when I open it in the web browser, or when I preview it in Photoshop.
View 4 RepliesRunning Photoshop CS6 Extended 64-bit.
For some reason I cannot choose between Video Timeline & Frame Animation in the Timeline window. I do not know why, I've looked in the Timeline panel options, still nothing.
Whenever I try to upload a video clip, it only shows in timeline format and when I try to convert it to frame animation, it says "The video will not play back in frame animation."
View 1 Replies View RelatedHow do I switch to video timeline from frame animation?
View 1 Replies View RelatedI was wondering if when I stop a looping clip playing in my timeline, I could have it stop at the frame I stop on instead of stopping at the positioner or in-point. This is a very vital problem I'm having.
I have come up with a work-a-round but it doesn't work near as smoothly as I would like it to.
All I do for the workaround is instead of hitting space when I stop, I hit right alt to set an in point then hit space to stop and "A" to move to my newly created in-point. But it doesn't work as smoothly as it should. I would really like it to perform like playing a clip in the desktop works. It just loops around and when I stop, it actually stops.
I am editing a short avi clip converted from a 1959 8mm film in the timeline. The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask. I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip.
Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful. Previous feedback recommended methods to mask the edge. Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect.
My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame. Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
How do I save frame by frame in the timeline?
I'm working on a german keyboard.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
In the timeline panel in CS6 EXTENDED, you have a video feature, where you can animate three things:
Position Style Opacity
What I would like to know, is: How can I animate rotation of a layer? I want to rotate my layer at an angle and animate it. But when I rotate, the first animation frame is also rotated, resulting in NO animation between the frames.
I have created the following simple animation:
http:[url].....
the files are at: http:[url]....
I want the background to loop seamlessly, I have created the illustration so it will join ok at either end I just cant figure out how to do the Animation 'looping' element so its nice and smooth without any visual jumping? or without it jumping back to the beginning -
I create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
Have just reinstalled Photoshop CS6 - can't get frames into Timeline. What to do?
View 1 Replies View RelatedI am trying to find out if there is a key command in Photoshop cs3 extended to advance a frame without using the mouse. It really seems like there would be.
View 1 Replies View Related time it is 3D objects not responding to keyframe animation changes. I have tried creating a new 3D object. I have tried dragging and dropping the new object in to the target doc. I can't copy it withou t rasterizing. Do I have to develop the object from scratch from within the doc? I hope not. the target doc is already very large, this 3D object being the final element. Here are some screen shots
This is what happenes after dragging the 3d object from one spot the another on the canvas. There is only one object. the other is a ghost and disappears after I move in the time line. the actual 3d object remains in the position of the first keyframe no matter how many times I try to move it. Each time I get the "ghost" obejct before moving in the timeline.
Here is a screen shot of the timeline where the keyframes are registering but the object does not move to the new location. Just the "ghost" object appears and then is gone when I move in the timelineHere is the same object on it's own it the original doc . I had no trouble getting it to respond to keframe changes on it's own.acreen shot of the target doc's layer panel. I guess I need to know if there is a way to import a 3D object into a n existing doc without haing to develop in that doc.
I'd like to do some animation in photoshop, especially frame to frame animation. (such as editing images from stop motion)
But I'd like to import big quantities of images to a psd file, and which each image would automatically be imported to 1 different layer. Is it possible to do that?
The photos are fairly too high resolution to export as video (3456x 2034) so i don't want to make a video out of them and import the video sequence...
The new timeline in photoshop cs6 is weird but I don't understand how I can use it for animating. I use photoshop for frame-by-frame animaiton (Not flash) and the new Timeline is confusing me. How do I use this new time line for frame-by-frame animation similar to the Animation Timeline in Cs5?
View 10 Replies View RelatedI am trying to learn how to do a small animation. I have Timeline window open at bottom of screen but do not understand how to get images into the space. Everything is grayed out. I have read the Adobe tutorial but nothing really says how to place key frames into the timeline space. I watched a YouTube video but it started with there already being an image there and then they showed how to copy and change it so an animation could be achieved.
View 2 Replies View RelatedI have a problem with a 3D object imported in PS CS4. It is about 3 seconds long on the timeline, and cannot be extended, I tried to drag but it cannot be dragged further, you can only make it shorter. The thing is that my animation is 30s long, and i want the object to be visible till the end. I know I can always duplicate the layer several times and move it, but that results in bigger file, more layers...
View 1 Replies View RelatedI want to key frame animate something to go in a straight line but it seems to start out slowly, speed up, and then slow down again at the end. Is there a way to make it so the object moves the same speed throughout?
View 1 Replies View RelatedI'm trying out the new Photoshop Creative Cloud, and probably the most annoying thing is that the animation panel always opens up and covers up things / gets in the way at start or whenever I open a new file.
View 3 Replies View RelatedLong-time PS user here, however for 2 years now my home version of Photoshop CS4 seemingly axed the Timeline portion of its animation panel. I've sort of accepted it until now, but recently I wanted to try some hand-drawn animation. As you can see this a significant speed bump. How to restore/reopen that portion of Photoshop, or am I just crazy in thinking CS4 ever had it to begin with?
View 2 Replies View RelatedConvert To Timeline Animation Button doesnt appear and its driving me crazy.in the animation window its in frame animation mode and this button im talking about doesnt appear!.
View 3 Replies View RelatedI've made fire brushes and want them to change color and shape over time in the animation timeline for a movie sequence. I've made a separate layer for the fire, but can't figure out how to make it so that I can change the shape and colors over time on the timeline. This is a 10 second sequence.
View 2 Replies View RelatedI am using Adobe Photoshop CS5.1 and I am trying to switch from Frames to Timeline in the Animation Panel. I have read in other forums that there should be a menu in the bottom right corner of the panel, but none is appearing in my panel.
View 5 Replies View RelatedI am working on an animation with 3d layer, clip is 10 second long but I cant push the layer further than 5 seconds, other 2D layers are working fine,
View 4 Replies View RelatedI've used it before. I just clicked it to convert to Frame by Frame, but then the button disappeared.
View 2 Replies View RelatedI have tried multiple times now to download a trial for Photoshop CS6 Extended. Everyone says that the CS6 trial is already the extended version and only changes based on your serial number at purchase but every time I try to open a video project of mine it says "This file contains a timeline-based animation (Photoshop Extended only)"
View 1 Replies View RelatedI have a single frame clip in my library, i want to put this clip into my timeline and i want it to be 10 seconds. I can just easily in/out in timeline and 'overwrite'. i don't like where i'm repeating a single frame and then still need to render it as 10 seconds clip.
This should be done like 'repeat' in the desktop tools. So in timeline when doing 'overwrite' , Smoke has to be smart to detect 1 frame edit so it just need to 'repeat' it not to 'timewarp' it.
And the another BAD thing , i can't have 'repeat' tool inside cfx . why ? so have to repeat the clip outside the cfx and go back into cfx.
I've been using Maya for two years. I have used the timeline on this version before, but now it is completely gone. Everything else is normal. Is there a place to reset everything? Where might I look to try and turn the timeline back on?
View 2 Replies View RelatedI'm using fcp hotkey , by default the 'drag copy (single frame)' is mapped to ' alt-c' . Normally this will work fine. But in some case where a cfx clip is selected or my time indicator is parked on top of a cfx clip in active timeline , then do 'alt-c' will give an error message "connectfx cannot be modified inside the containers. Proceed with edit ? "
So to solve this temporarily, i have to first deselect the cfx clip or move the current positioner on top of a non-cfx clip.
I have a jpeg sequence of 165 frames in my psd animation. Upon export (as an .mov file), I need to keep frames 1-29 and 80-165 as is, but speed up frames 30-79. How can achieve this in PS CS4?
I have tried exporting each of the clips individually and then brought them into i Movie to speed up the middle portion and subsequently re-piece them all together. This works great, but I am not familiar enough with i Movie or Premiere Pro to export the file properly; it seems to not allow me to export it with the same specs (mainly size, 1280x1024 at 30fps) as my source files.
how to change the frame rate of an imported video in the working animation timeline box.
It automatically imports them as like 33 frames a second.
This is in CS3.