Photoshop :: CS6 - Frame Into Timeline

Mar 17, 2013

Have just reinstalled Photoshop CS6 - can't get frames into Timeline. What to do?

View 1 Replies


ADVERTISEMENT

Photoshop :: Saving Frame By Frame In The Timeline

Jan 27, 2013

I am editing a short avi clip converted from a 1959 8mm film in the timeline.  The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask.  I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip.  

Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful.  Previous feedback recommended methods to mask the edge.  Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
 
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect. 

My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame.  Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
 
How do I save frame by frame in the timeline?

View 4 Replies View Related

AutoDesk Smoke :: How To Move Clip In Timeline Frame By Frame

Aug 31, 2011

I'm working on a german keyboard.

Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)

View 6 Replies View Related

Photoshop :: Select Next Frame In The Timeline Key...

Jun 5, 2008

I am trying to find out if there is a key command in Photoshop cs3 extended to advance a frame without using the mouse. It really seems like there would be.

View 1 Replies View Related

Photoshop :: 3D Object Won't Respond To Key Frame Changes In Timeline?

Sep 28, 2012

time it is 3D objects not responding to keyframe animation changes. I have tried creating a new 3D object. I have tried dragging and dropping the new object in to the target doc. I can't copy it withou t rasterizing. Do I have to develop the object from scratch from within the doc? I hope not. the target doc is already very large, this 3D object being the final element. Here are some screen shots
 
This is what happenes after dragging the 3d object from one spot the another on the canvas. There is only one object. the other is a ghost and disappears after I move in the time line. the actual 3d object remains in the position of the first keyframe no matter how many times I try to move it. Each time I get the "ghost" obejct before moving in the timeline.

Here is a screen shot of the timeline where the keyframes are registering but the object does not move to the new location. Just the "ghost" object appears and then is gone when I move in the timelineHere is the same object on it's own it the original doc . I had no trouble getting it to respond to keframe changes on it's own.acreen shot of the target doc's layer panel. I guess I need to know if there is a way to import a 3D object into a n existing doc without haing to develop in that doc.

View 5 Replies View Related

Photoshop :: 24 Frame Animation GIF - Timeline Looping

Mar 18, 2013

I have created a successful 24 frame animation gif using Photoshop layers and putting them into timeline. I have saved it for web, and checked the Once option. I have checked the looping option to 'Once', but when I play it or place it in an email it loops forever. It only plays once when I open it in the web browser, or when I preview it in Photoshop.

View 4 Replies View Related

Photoshop :: Can't Choose Between Video Timeline And Frame Animation

Nov 21, 2013

Running Photoshop CS6 Extended 64-bit.
 
For some reason I cannot choose between Video Timeline & Frame Animation in the Timeline window. I do not know why, I've looked in the Timeline panel options, still nothing.

View 6 Replies View Related

Photoshop :: Unable To Convert Timeline To Frame Animation

Apr 8, 2013

Whenever I try to upload a video clip, it only shows in timeline format and when I try to convert it to frame animation, it says "The video will not play back in frame animation."

View 1 Replies View Related

Photoshop :: How To Switch To Video Timeline From Frame Animation

Oct 31, 2013

How do I switch to video timeline from frame animation?

View 1 Replies View Related

AutoDesk Smoke :: Put Single Frame Clip Into Timeline

Dec 26, 2012

I have a single frame clip in my library, i want to put this clip into my timeline and i want it to be 10 seconds. I can just easily in/out in timeline and 'overwrite'. i don't like where i'm repeating a single frame and then still need to render it as 10 seconds clip.

This should be done like 'repeat' in the desktop tools. So in timeline when doing 'overwrite' , Smoke has to be smart to detect 1 frame edit so it just need to 'repeat' it not to 'timewarp' it.

And the another BAD thing , i can't have 'repeat' tool inside cfx . why ? so have to repeat the clip outside the cfx and go back into cfx.

View 3 Replies View Related

AutoDesk Smoke :: Timeline Edit - Drag Copy Single Frame Is Broken

Dec 26, 2012

I'm using fcp hotkey , by default the 'drag copy (single frame)' is mapped to ' alt-c' . Normally this will work fine. But in some case where a cfx clip is selected or my time indicator is parked on top of a cfx clip in active timeline , then do 'alt-c' will give an error message "connectfx cannot be modified inside the containers. Proceed with edit ? "

So to solve this temporarily, i have to first deselect the cfx clip or move the current positioner on top of a non-cfx clip.

View 2 Replies View Related

Photoshop :: How To Change Timeline Mode From Frames To Timeline

Mar 7, 2013

I cannot find the menu from where to change the timeline mode.

View 10 Replies View Related

Edge Animate CC :: Symbol Timeline Versus Stage Timeline

Apr 3, 2014

If I have a symbol with its own timeline, I am familiar with targeting it with otehr elements and symbols and activating that timeline. But the symbol will also have a presence on the stage timeline - how does one play that?
 
I might be overcomplicating it, I thought it might just be play() on the main stage but that doesn't appear to work, neither does getStage.play() so I am doing something wrong somewhere

View 2 Replies View Related

Edge Animate CC :: How To Play A Symbol Timeline From Main Timeline

Jan 7, 2013

Ive created a box, turned it into a symbol called box,Inside box i have a left to right animation with auto play turned off.I then went back to the main stage, clicked the box, added action, on click to play, yet it does nothing.How do i Play the symbols timeline?

View 1 Replies View Related

Photoshop :: Reset DEFAULT Frame Rate In Frame Animation Pallet?

Nov 30, 2012

I create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?

Preferences did not yield any promising menus

I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2

View 3 Replies View Related

Photoshop Elements :: Apply Frame From Content Section - Frame Goes On Top Of Any Picture

Nov 25, 2012

I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture. 

View 2 Replies View Related

Photoshop Elements :: Create A Frame Inside Frame?

Nov 15, 2013

How do I creat a frame inside a frame?  Elements 4.0

View 2 Replies View Related

Photoshop :: Edit Video Frame By Frame

Nov 19, 2013

My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.

What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.

I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.

View 9 Replies View Related

AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator

May 22, 2013

After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?

View 2 Replies View Related

AutoCAD Inventor :: Frame Design - Trim To Frame Fails With Custom Profile

May 20, 2013

I created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).

View 2 Replies View Related

AutoCAD Inventor :: How To Split Frame Member On Custom Profile Frame Generator

Apr 30, 2013

After using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?

Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB

View 2 Replies View Related

CorelDRAW / DESIGNER SDK :: How To Convert Frame Into Empty Text Frame Using Macro

Dec 17, 2013

how to convert a frame into an empty text frame using a macro?

View 1 Replies View Related

AutoCAD Inventor :: Notch Or Miter A Straight Frame To Curved Frame

Dec 13, 2011

There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.

View 8 Replies View Related

AutoCAD Inventor :: When Detailing Generated Frame View Shows Elongated Frame Members

Jul 26, 2012

I come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.

Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework.  This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.

When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.

;note how the left and right views are different and how some of the frame members are elongated on the lh view.

 I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.

HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012

View 1 Replies View Related

Illustrator :: Scale Border Or Frame Without Scaling Frame Width?

Aug 23, 2012

I'm designing some photo frames and as they come in loads of different sizes, I'd like to be able to make the frame design bigger, in illustrator, but keep the width of the actual border. i.e. at the moment it's for a 10cm x 15cm photo with a 3cm wide border going all the way round - I want to keep it 3cm for larger photos.

and here's a link to the .ai file: [URL] I have loads of other frame designs which will need similar treatment so I'm looking for a general solution rather than something that is totally specific for this design.

View 5 Replies View Related

Premiere Pro :: How To Make Audio Play When Move Frame By Frame

Jan 5, 2014

It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.

View 1 Replies View Related

Photoshop :: Frame To Frame Animation

Apr 3, 2009

I'd like to do some animation in photoshop, especially frame to frame animation. (such as editing images from stop motion)

But I'd like to import big quantities of images to a psd file, and which each image would automatically be imported to 1 different layer. Is it possible to do that?

The photos are fairly too high resolution to export as video (3456x 2034) so i don't want to make a video out of them and import the video sequence...

View 1 Replies View Related

Photoshop :: What Is Frame By Frame

Jul 30, 2009

I've been hearing very much about this frame by frame thingy but i just dont know what it is or where to find it.i think it is a tool or button to edit a frame without getting the other frames modified or i just dont know. i simply want to know how to edit a frame without getting the other frames modified or a good tutorial because i dont understand the adobe help.

View 4 Replies View Related

Photoshop :: CS6 Has Old Timeline?

Jan 23, 2013

I just downloaded the trial version of photoshop CS6, anticipating the newer version of the Timeline. However when I opened it I found instead the older version. My animation professor wants us to use the new version, so I'm unable to work with this. URL....

View 5 Replies View Related

Photoshop :: CS Not Allow To Add MOV To Timeline

Apr 21, 2013

I was editing an .mov file in Photoshop (I don't have sufficient OS for AfterEffects). All was going well, so saved the projects as a .psd file (which I'd learned from an online tutorial and which had never given me problems before) and took a break. When I tried to reopen it, the video won't play and there's a yellow exclamation mark next to the thumbnail in the layers palette. I tried opening a new file and adding the original .mov to the timeline, but got the message "Could not complete request because Dynamic Link Media Server not available."

View 2 Replies View Related

Photoshop :: Extending Timeline In CS6

Jun 29, 2012

In CS6, I cannot find the option to extend the duration of my photoshop document.  I am using Photoshop to make a short hand-drawn animated film.  Currently, the document is 300 frames long, but I would like to extend that to 400 frames. (I'm working in timeline mode, not frame mode.)
 
I could easily change the duration of a document in CS5 by clicking on the little drop-down menu in the top right corner of the animation panel, then going to "Document Settings" where I could change the duration and the frame rate.  When I click the drop-down in CS6, I find the frame rate option, but no duration.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved