Photoshop :: Saving Frame By Frame In The Timeline
Jan 27, 2013
I am editing a short avi clip converted from a 1959 8mm film in the timeline. The telecine conversion results in as sharp an image as I have manged to get using PPro 5.5 unsharp mask. I tried mocha planar tracking to automatically remove a fixed spider web on the top edge of each frame in the clip.
Because the web is not distinct and the background does not progress at a steady fixed pace, the mocha procedure was not successful. Previous feedback recommended methods to mask the edge. Using various masking attempts to automate the procedure was also unsuccessful for the same reasons as mocha.
I have the time and decided to replace the spider web on each frame edge using photoshop tools e.g. clone stamp etc. - although other tools such as healing brush do not appear to work in the timeline as I expect.
My saves so far have resulted in a whole clip being saved with all following frames being modified similar to the first edited frame. Perhaps I am not using the editing procedures in photoshop from the timeline correctly.
How do I save frame by frame in the timeline?
View 4 Replies
ADVERTISEMENT
Aug 31, 2011
I'm working on a german keyboard.
Smoke 2012 SAP2 SP4
and
Smoke 2013 SP2 (Smoke Classic Keyboard Shortcuts)
Mac Pro 4,1
OS X 10.6.7
12 GB RAM
NVIDIA Quadro 4000
14 TB RAID (Areca)
View 6 Replies
View Related
Mar 17, 2013
Have just reinstalled Photoshop CS6 - can't get frames into Timeline. What to do?
View 1 Replies
View Related
Jun 5, 2008
I am trying to find out if there is a key command in Photoshop cs3 extended to advance a frame without using the mouse. It really seems like there would be.
View 1 Replies
View Related
Sep 28, 2012
time it is 3D objects not responding to keyframe animation changes. I have tried creating a new 3D object. I have tried dragging and dropping the new object in to the target doc. I can't copy it withou t rasterizing. Do I have to develop the object from scratch from within the doc? I hope not. the target doc is already very large, this 3D object being the final element. Here are some screen shots
This is what happenes after dragging the 3d object from one spot the another on the canvas. There is only one object. the other is a ghost and disappears after I move in the time line. the actual 3d object remains in the position of the first keyframe no matter how many times I try to move it. Each time I get the "ghost" obejct before moving in the timeline.
Here is a screen shot of the timeline where the keyframes are registering but the object does not move to the new location. Just the "ghost" object appears and then is gone when I move in the timelineHere is the same object on it's own it the original doc . I had no trouble getting it to respond to keframe changes on it's own.acreen shot of the target doc's layer panel. I guess I need to know if there is a way to import a 3D object into a n existing doc without haing to develop in that doc.
View 5 Replies
View Related
Mar 18, 2013
I have created a successful 24 frame animation gif using Photoshop layers and putting them into timeline. I have saved it for web, and checked the Once option. I have checked the looping option to 'Once', but when I play it or place it in an email it loops forever. It only plays once when I open it in the web browser, or when I preview it in Photoshop.
View 4 Replies
View Related
Nov 21, 2013
Running Photoshop CS6 Extended 64-bit.
For some reason I cannot choose between Video Timeline & Frame Animation in the Timeline window. I do not know why, I've looked in the Timeline panel options, still nothing.
View 6 Replies
View Related
Apr 8, 2013
Whenever I try to upload a video clip, it only shows in timeline format and when I try to convert it to frame animation, it says "The video will not play back in frame animation."
View 1 Replies
View Related
Oct 31, 2013
How do I switch to video timeline from frame animation?
View 1 Replies
View Related
Nov 30, 2012
I create animated gifs frequently using the Frame Animation pallet. The default frame rate starts out as 10 seconds, so I always have to change it to 4 seconds. Is there anyway to reset the default frame rate that I start out with to 4 seconds, so that I don't have to change it every time?
Preferences did not yield any promising menus
I know the standard default reset with many Adobe products is to change it without a document open, but in PS CS5.5 if you do not have a document open the frame rate option is greyed out
______________
CS5.5
MacPro Tower
Mac OS 10.8.2
View 3 Replies
View Related
Nov 25, 2012
I am trying to add a frame to some pictures, but when trying to apply a frame from the content section, the frame goes on top of any picture...and not directly on to the picture.
View 2 Replies
View Related
Dec 26, 2012
I have a single frame clip in my library, i want to put this clip into my timeline and i want it to be 10 seconds. I can just easily in/out in timeline and 'overwrite'. i don't like where i'm repeating a single frame and then still need to render it as 10 seconds clip.
This should be done like 'repeat' in the desktop tools. So in timeline when doing 'overwrite' , Smoke has to be smart to detect 1 frame edit so it just need to 'repeat' it not to 'timewarp' it.
And the another BAD thing , i can't have 'repeat' tool inside cfx . why ? so have to repeat the clip outside the cfx and go back into cfx.
View 3 Replies
View Related
Nov 15, 2013
How do I creat a frame inside a frame? Elements 4.0
View 2 Replies
View Related
May 22, 2013
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. How to split these frame members?
View 2 Replies
View Related
May 20, 2013
I created an extruded aluminium profile (attached file: Item Profile 8 80x80) which I published into the Content Center. When using this profile in a frame design, and using the Trim To Frame command, the profiles are trimmed at a weird angle (attached pdf file).
View 2 Replies
View Related
Apr 30, 2013
After using Custom Profile for Frame Generator, the Part List will show total length, not individually. how to split these frame members?
Inventor Professional 2013 SP1.1
Windows 7 Pro 64-bit, SP1
HP EliteBook 8460w; 8 GB RAM; i7 - 2.0 GHz; AMD Firepro M3900 -1 GB
View 2 Replies
View Related
Dec 17, 2013
how to convert a frame into an empty text frame using a macro?
View 1 Replies
View Related
Dec 13, 2011
There should be a way to Notch a straight frame to a curved frame! I want to laser cut the tube, so I really need to trim one tube to a curve tube.
View 8 Replies
View Related
Nov 19, 2013
My band has just recorded our first music video. We are very happy with the result except that the glasses on me (the lead singer) during the close-ups look very funny, they are very skew, and the "frame" does not go behind the ear.
What I would like to do is to import the video and edit these clips frame by frame, where this is showing. There is about 15 seconds totally of me in close-up - 15 x 24= 360 images. The clips are about 1-3 seconds long. And I want to edit all of these short clips of me and then make it a full-length video again.
I made a quick edit on one of the images from the video. The shades still look a little funny but it gets better when the frame goes behind the ear. If it's possible to correct the "glass" part of the shades as well.
View 9 Replies
View Related
Jul 26, 2012
I come across this problem from time to time and generally either just ignore it, if the detail is destined for in house manufacture, or alter it in autocad if it's destined for exterior suppliers.
Our guard frames are manufactured from extruded aluminum section (made by a company called palletti) I have when needed created a new frame generator frame member for each new x-section that we wish to use. I then draw a 2d sketch for the base frame skeleton and then a 3d sketch for all the frame work above. This I then use in an assembly to create the framework. This framework assembly then goes into a second assembly where the framework is then adorned with all the accoutrements that make up a guard frame that we can then order as an assembled frame, panels feet, hinges et al.
When placing the views for the detailing of the second assembly sometimes the view will show the wrong length for one or some of the frame members.
;note how the left and right views are different and how some of the frame members are elongated on the lh view.
I'm guessing its because of the home grown frame members but all seems to work well other wise and this only happens infrequently.
HP z210 16Gb ATI FirePro5800
Autodesk Produst design Suite 2012
View 1 Replies
View Related
Aug 23, 2012
I'm designing some photo frames and as they come in loads of different sizes, I'd like to be able to make the frame design bigger, in illustrator, but keep the width of the actual border. i.e. at the moment it's for a 10cm x 15cm photo with a 3cm wide border going all the way round - I want to keep it 3cm for larger photos.
and here's a link to the .ai file: [URL] I have loads of other frame designs which will need similar treatment so I'm looking for a general solution rather than something that is totally specific for this design.
View 5 Replies
View Related
Jan 5, 2014
It used to be that whenever i would move the cursor in adobe premier with either the left or right arrows or by simply clicking and dragging it, it would play the audio from that frame. But it is not doing it anymore, I think i must have accidently hit a shortcut key or something to change it in settings i dont know. But it would be good if I could get the setting to change it back. I know for a fact that my laptops speakers do work, so its not that.
View 1 Replies
View Related
Dec 26, 2012
I'm using fcp hotkey , by default the 'drag copy (single frame)' is mapped to ' alt-c' . Normally this will work fine. But in some case where a cfx clip is selected or my time indicator is parked on top of a cfx clip in active timeline , then do 'alt-c' will give an error message "connectfx cannot be modified inside the containers. Proceed with edit ? "
So to solve this temporarily, i have to first deselect the cfx clip or move the current positioner on top of a non-cfx clip.
View 2 Replies
View Related
Apr 3, 2009
I'd like to do some animation in photoshop, especially frame to frame animation. (such as editing images from stop motion)
But I'd like to import big quantities of images to a psd file, and which each image would automatically be imported to 1 different layer. Is it possible to do that?
The photos are fairly too high resolution to export as video (3456x 2034) so i don't want to make a video out of them and import the video sequence...
View 1 Replies
View Related
Mar 24, 2012
I am really new to video Studio Pro X4. How can I isolate a single cell (frame) of a video clip and export it or save it as JPG or BMP or some other graphics format for use as a pic in another application. i.e. photosho, paint shop, Corel Draw, etc.
View 4 Replies
View Related
Jul 30, 2009
I've been hearing very much about this frame by frame thingy but i just dont know what it is or where to find it.i think it is a tool or button to edit a frame without getting the other frames modified or i just dont know. i simply want to know how to edit a frame without getting the other frames modified or a good tutorial because i dont understand the adobe help.
View 4 Replies
View Related
May 29, 2012
i'm running cs6 under windows 7..yesterday i was watching a video tutorial about application frame feature but where is it? under window there is no mention to application frame , there is only options and tools..
View 3 Replies
View Related
Sep 17, 2013
I am having trouble "resetting" an animation I made in PS CS6 using the 3d Scene Position tab in my timeline.
I set my key frames and made the movements and made a decent little video, however when I went to rework the timeline, removing the key frames did not remove the "movement"
How to remove all of the "moves" so that I am starting from a static 3d image again? This image is a can I made myself with the lathe and has a label wrapped around it.
View 2 Replies
View Related
Sep 12, 2013
So when I unlug my MacBook Pro from my Cinema Display, the bottom of the app chrome (application frame and palettes) on the MacBook's display cannot be adjusted. At all. Impossible to grab them with the mouse and readjust for the new screen.
I've tried restarting Photoshop CC. Restarting my Mac. Nothing. Wouldn't there be an option to resize to the current display? Shouldn't this be automatic?
The only thing that seems to work is turning off the Application Frame, and using PS in this mode.
View 5 Replies
View Related
Feb 28, 2013
I use this software to extract some graphics and animations. But when i export an animation to .gif it slow down. So, i export each frame to .bmp. I open in photoshop all the .bmp, create an animation, but when i export it...yeah the same problem... the .gif is slower.
I record a video as an example. [URL] ..........
I don't know why this happens.
Note: This is an example. This happens with almost animated gifs i create with photoshop. I use Photoshop CS5.5)
View 2 Replies
View Related
Jan 24, 2006
Is there any way that one can make a frame around a photo with photoshop?
View 3 Replies
View Related
