I am trying to reduce my playback resolution and the information you provide in the help section does not match my screen so I cannot find the setting options for this
View 1 RepliesSince quite some time I have been succesfully uploading FullHD (AVCHD 1920x1080 50i) movies on YT. Some weeks ago I got a strange playback problem with my last uploads: video's are played in (very smooth!) slow motion mode at some resolution settings. The same Divx video's on the contrary always playback OK In order to illustrate the YT playback speed problems I uploaded two times the same 10sec video. The first video has been rendered as a fullHD AVCHD video in VSX4 (never got problems in the past with similar video’s), the second is a fullHD DviX version of that same video (from another converter). The lower resolution settings in the AVCHD video slow down while the 720 and 1080 settings run OK [URL]
View 2 Replies View RelatedI am using a title that scrolls across the screen, by spelling out one letter at a time.
However, I feel the speed is a bit too fast, and I'd like to slow it down.
I try extending the length of the clip, but this doesn't seem very effective.
How can I slow down the speed of this title movement?
I have a video shot from inside a vehicle driving down a rural French road. I would like to increase the speed to 110% to 115% as the video progresses to match the music I will overlay it with.
I know how to increase the playback speed, but I can't seem to find if it's possible to do it gradually. Everything I try increases the speed all a once. Is this possible (gradually increase speed) with the Playback Speed settings, or do I need to make two clips of the same segment, 1 at regular speed and 1 at the final speed, and use a long transition between them?
If I playback in fragment mode, the speed is ok. But if I playback in project mode the speed is a little slowing down.
How is this possible ?
I don't know why Corel made this program without the ability to change the playback speed in project view. You can only change the speed on each clip. When you have 50 or more clips, this can take all day, when it could take a few seconds if you can do it in project mode.
View 10 Replies View RelatedI work on big manual and automatic workstations, cells, and lines.
Before shrinkwrapping, my part count usually hits around 13,000-17,000 parts.
Using Publisher seems to be the best way to present our ideas to customers all across the world.
But we have run into limitations where the message on our i-pads read "Filetype too large" (or something along those lines).
I have successfuly published and uploaded my files, so whats happening?
Is it a matter of rendering 400,000 or so triangles as a max?
How I can reduce the size and make these files work?
Shrinkwrapping has no effect.
I have blended still photos, imported video AVI with it's own audio and music tracks. The work area was rendered and when I play the sections the music blends out and the video plays back as it's supposed to and even with full screen. Then I use the "Share" tab and burn a DVD using either a DVD-R or DVD+R and everything is fine except the video pieces that I want to play are silent.
View 2 Replies View RelatedI'm running elements 11 (on windows 8 pro), and I noticed when I click on a video, (the thumbnail is there in organiser), and hit "play" all I get is grey screen, the timeline runs fine, theres sound, just no image.
View 4 Replies View RelatedI have a Sony Cyber Shot DSC-WX50. I have installed QuickTime
View 29 Replies View RelatedAfter upgrading the raw-file, finally video playback from files filmed with this camera is back, but the playback is still silent....
View 2 Replies View RelatedHow do I reduce the resolution of a photo down to 100K for posting on the web?
View 3 Replies View RelatedI just downloaded the trial version CS6. I imported into Photoshop, Pro Res 422 HQ clips and it plays back very choppy. When exported it remains choppy.
View 4 Replies View RelatedIn CS6, When editing Pro Res 422, Video with single layer plays back fine but with 3 layers playback and export are very choppy. I tried merging layers but the video doesn't playback at all. Is there any other settings I could try?
CS6 memory usage is 100%, sound is turned of in TL. System MacPro -Quad Core Intel Xeon-Processor Speed 3 GHz, Memory 8GB.
I made a 3D roatating moving logo in photoshop via mothion in Photoshop, it has a transparent background as i deleted it. When i go to render video its in animation already. I save and render it in quicktime but when it plays back on quicktime it has a black background around the image. How do i save it to play just the logo with NOblack background. Ive tried everything i know but NO joy.
View 7 Replies View RelatedIn Photoshop CS6 Extended, the timeline is playing back my animation at a low resolution. How do I change it so it plays back at normal quality, like all the previous versions of Photoshop?
View 4 Replies View RelatedI need to create a clip of a sketch being executed stroke by stroke - tool recording seems to give me this possibility, but how do I save the palyback as an image sequence?
View 1 Replies View RelatedI want to create an action where I create a stop, add text (patient's name for medical photos) which is automatically formatted to my preference of font size, color, etc. I can then hit the action play button to run the remainder of the action command, which will join and size photos from different files for printing. I can do everything but add the patient's name.
View 3 Replies View RelatedI've created a slide show using layers and have created a video group. This turns the layers into clips in the timeline. I've added a cross-fade transition between each clip in the timeline.
Everything plays back nicely in PS. When I export to mp4 and play it back in Quicktime, no matter what the magnification, the transitions look horrible. Even if I freeze frame on one it's horribly pixelated. I've tried different export options with the same results. Something appears to be happening during rendering the transitions, as if PS doesn't know how to create them. I export to:
Adobe Media Encoder
H.264
High Quality
1920 x 1080 (same as my file)
Frame Rate 30 fps
Field Order: Preset (Progressive)
Range = All Frames
My stats are:
PS CS6
iMac 27"
10.6.8
800 gigs free space
12 gigs ram 8 free
I downloaded free trial of Video StudioPro When i am capturing video from external device and the video captures OKAY, but there is no Audio when i play back the video????
View 13 Replies View RelatedI've uploaded MPEGs from Panasonic DMC-TZ7 on HD quality. Audio works fine when playing clips and when played on Quicktime. When playing back on Project, I get a chopped pulsing noise on some parts (although they play OK as clips). I used simple fade to black transitions and trimmed clips. When I finish project, the sound was OK on the first clip but I get no sound or the odd pulse of sound on subsequent clips.
I have re-installed VS pro X3 and downloaded the latest patches but it makes no difference.
I'm using pro x4, had no problems til today
I'm using win7, and just from today, x4 has stopped giving any sound output. Playing mpg files I can see the sound levels in the mixer, but there's no output audio. I can hear mpg audio in other players, just not in Corel.
I recently transferred collection of Super8 movies from a VHS tape and burned to a DVD. Upon playback on the computer, as well as preview prior to burning, the audio on the clips worked fine. However when the disc was played on the DVD player ( tried my blu-ray player as well), there was only audio in sections where I had added an audio track. Did I miss something ?
View 4 Replies View RelatedHow can I reassign the keyboard shortcut for playback on the animation timeline? Right now it is the spacebar. If I hold the spacebar, it switches to the move tool. If I tap it, it plays back my animation. Too often I accidentally tap for playback when I just want to use the move tool. I'd much rather have the two be separate keys altogether.
I use Photoshop CS5 Extended on Windows 7.
While editing a large video file (one hour), the audio playback worked for a while, but then simply stopped working. Can still see video and edit it, but without hearing the words / background, editing will not be correct. Is there a bug in the software or some way of reseting the file? I have noticed a similar issue with videos in LR4.
View 2 Replies View RelatedI am using PS in a traditional animation capacity--drawing each frame of animation by hand on a seperate layer. I loved doing this in 5.5 and it worked wonderfully on my machine. There are a couple of problems for me with CS6 that perhaps
My main problem is that when i play back my animation (I prefer to use the clips/layers version as opposed to the "frame" version which is more limited in my opinion), the image quality is horrible. When I say "play back" I mean hitting the spacebar and playing it, not rendering it. This feature worked like a charm in CS5.5, but the quality is very low in CS6. The same thing happens when scrubbing with the play head--the image quality gets all blocky and pixelly looking. The funny thing is, when I stop playback or stop scrubbing through frames, the images go back to thier normal state.
When I first saw this happen, it reminded me of a low quality RAM preview in After Effects (for those of you who are familiar with After Effects)--which I thought would make sense, since AE offers a way to increase or descrease the quality of immediate playbacks (RAM Previews) depending on what you are testing in the playback and how much available RAM you have. But there is no way to adjust the playback quality in PS CS6--at least not one that I can find. I absoluately need playback to be 100% quality as it was in 5.5, otherwise this feature is completely useless to me.
Also--did they remove the "onion skinning" button from the Timeline window? That was so useful... That is such a useful button for anyone attempting traditional animation in this program--which it was wonderful for in CS5.5.
BTW--my current machine specs if that matters:
Mac Mini, 2009 model
2.26 Ghz Intel Core 2 Duo 64 bit
NVIDIA GeForce 9400 256MB
OSX Lion
4 GB RAM
100+ GB free HD space
I am playing a section of a project in Timeline view. The section is marked by the Trim Markers. Starts fine but then pauses/stops when it reaches the end of the accompanying music (an mp3) rather than at the second Trim Marker. Theses two points are different because the video fades to black as the music finishes. The video should continue to run for 2 or 3 seconds more with a black screen.
I've noticed that if I select the Sound Mixer and then play the section between the Trim Markers it works fine i.e. plays up to the second Trim Marker.
Also, it seems that if I create a video of the selected part of the project this works fine too.
I just seem to be getting the problem in Timeline view when I have black video that runs after an mp3. I have checked multiple projects where I have the same effect (fade to black as music ends) and I am getting exactly the same problem. As the sound stops, so does the playback.
Background is that I am new to X3 and struggling. I had problems authoring in X3 so used X2,. Then had a problem with X2 so re-installed. Then found this problem when editing again in X3 so reinstalled X3!
When editing DV from my old mini dv camcorder, how can I get the final edit to fill the screen without the black side bars after puting on to a dvd and playing back on a 1080x1920 tv. does VS pro x4 have a setting to eliminate the black bars?
View 4 Replies View RelatedI am not new to this software and have made many videos. The problem is that I got a new computer with Windows 8 and installed X4 VideoStudio. I can hear the sound file when I select the clip but as soon as I select Project, there is no sound. I am currently uninstalling the program and trying to reinstall.
View 2 Replies View RelatedI have been experiencing an error message from Windows Media Player when attempting to skip ahead (fast forward) with MPEG-4 HD files that I am creating with VideoStudio Pro X5. After the new MP4 HD file is first created (this can take anywhere from 30 minutes to 3 hours depending on the length of the clip, which are between 15 and 40 minutes), I open the file to view it in Windows Media Player. It starts playing normally with no problems, but as soon as I click to skip ahead on the timeline bar, an error message displays stating "Windows Media Player encountered a problem while playing the file". In the last 10 attempts or so I have only been succesful in creating one MP4 HD file that allows skipping ahead... I am not doing anything differently (that I am aware of, at least) when I "get lucky" and manage to create a file that does not generate the error message, and after burning the last 9 hours on three more failed attempts I decided to check
View 4 Replies View RelatedI recently purchased Pro x6. While I love the new features, something has been happening today that is frustrating. I captured some video from my Canon HG10 and placed it on the timeline. When I try to play it in the editor, a green screen appears over the video. I can hear the audio but cannot see it.
View 1 Replies View Related