I am using Corel VideoStudio ProX4 to build a small movie and am having a problem with AVI files. When I go to Step 2 Edit, and click on the folder icon to "Import Media Files" I can see a set of mp4 and avi files I would like to use in my project.
The mp4 files open fine and play just fine. The avi files were opening fine last night, but would play in a jerky manner when an audio track was laid over them. I blew away that project and today tried to go to Step 2 Edit, Import Media files, and tried to import the avi files again now I get this message:
File format mismatch
1081:1:3
It will no longer let me import, play, edit the avi files. These files play fine in Windows Media Player so I'm not sure what is going on. I just installed Service Pack 2 yesterday, and I'm thinking this may be causing the problem.
Just purchased VideoStudio X6 Ultimate and I am having some issues importing files either into a time-line or into a library. I have put the different days into different directories to aid me putting a DVD together. The files are mixed AVI and JPG files and some directories will import and others will not, the files were all collected within days of one another on a holiday using the same camera. I am importing using the capture tab then import from digital media button, this correctly gives me the select directory box but when I try and import certain folders I get a Microsoft Visual C++ Runtime Library error and a request to close the program.
The error states that "this program has requested the Runtime to terminate in an unusual way". I have tried moving the files to other directories, split them up and even tried to import one JPG from an affected directory with the same result.
I am running Win 8, with 8Gb of memory and 1.6 Tb of free hard drive space.
I'm trying to import a AVI file (its not DV) into VS but it comes up with the error message "xxx file is inaccessible" followed by the message "This file cannot be added to the project due to unknown file format or not enough memory or copyright".
I tried to play it in Windows Media Player but it came up with an error message about missing the required Codec. I installed the required codec (using MediaInfo advice) and Windows Media player can now play the file but VS still can't import it. The video stream of the AVI file is MPEG-4 (DivX 5). I would have thought that once I installed the correct codec for the Windows Media Player that VS should work with that file format?
I'm a new 3DS Max user, to be sure, I'm having trouble with the new Design Ultimate suite... trying to import Inventor *.iam or *.ipt files into 3DS Max. I get an error about wrong file format?
I am trying to import PTX or LAS files into Civil 3D and keep getting coordinate errors. Meaning, the scan data comes in at the right size (I've verified dimensions in RealityLINx) but for some reason the scans keep coming in close to the 0,0,0 point. I have tried two seperate projects, one with arbituary coords (7000, 7000, 600) and another with state plane coords (NAD27, Zone 5).
I have tried two ways... Through the Prospector using the CREATEPOINTCLOUD command. The scan data is in metric units and I have not found a way to convert the scan data, in Civil 3D, to feet units.
The other way I have tried is through the POINTCLOUDINDEX command. This command will convert my PTX or LAS files into a PCG and upon insertion into the drawing, I am able to give it a scale factor to try and convert to feet.
Like I said, I have done this all day today, with separate projects and keep getting the same results. I have inserted the scan data in both metric and feet units, measured identical objects and have come up with the same dimensions between the both units. But I still cannot get them to land where they need to.
I am unsure if this is a coordinate system error but most of the stuff that we scan is in an arbitrary system, so I am not sure if assigning a coordinate system will do the trick.
I'm trying to import canon 1dx raw files to LR5 from a card reader. I get this error: "The following files were not imported because they could not be read."
However when I import d800 files, it imports perfectly fine.
This is on a Mac. When I import the same files on the same card to a PC LR5, it works fine. I also tried using a different CF card, same results.
update: i got the files to import if i connected a usb cord directly to the camera.. but it never works with the card reader.
I recently purchased Video Studio Express 2010 and cannot import avi files that were created using a Flip. I have tried importing them from both my hard drive and a flash drive. VSE does not recognize the avi files on either drive. I have been able to import mpg files without any problems.
I am new to using Video Studio Pro. I would like to animate my Paint Shop Pro png files or gif files with Video Studio. I figured out how to make the video work and figured out how to change the speed on individual frames. My problem is saving the project. I can only save it as a VSP file and it is too big to upload to Photo bucket. The whole animation is 15KB.
Can you change the save as file extension to include animated gifs?
I have multiple .VOB and other files in a "VIDEO_TS" folder that I can't import using either the "File/Insert Media to Timeline" or the "Capture/Insert Digital Media" function of this VS Pro X2 software version. In both attempted instances I am presented with a error message that reads: 'Not a valid DVD Volume. Report ID: 0x8000408fe(2302)".
As background, these .VOB originated from my own personal DVD's recording that failed to "finalize" due to an electrical disconnect with that Liton recorder, or software failure. Using the Isobuster software, and the page 3 instructions for it found on the excellent website of [URL] ..., I created the file that I'm attempting to import into VS. I don't believe this remedial step of using Isobuster is the cause of my VS problem, as the .VOB files it created are functional as proven by their playing in VLC media player software. Thus, I don't want to be chasing ghosts along that path, unless you can be certain that is where I should be going.
I have just moved to VSP5 from 4 and am having difficulty importing .cr2 files in Capture. Same photo files go satisfactorily into v.4 but are apparently ignored by the new version. Am I missing a setup or preferences step?
To make this point more specifically: I have created test folders containing mixed .mov, .jpg and .cr2 files - only the .mov are recognised. I have also created a test folder containing only .jpg and .cr2 files. On Capture, VSP5 reports "There is no valid content".
I'm looking to import an existing project into another, I want to do this because then I can move the files around and edit them individually rather than creating an .avi and importing that video onto the timeline. Is there such a command?
I have been running PSE 10 for a while with my Canon 60D, windows 7 and I have never had an issue with importing CR2 files to my organizer. Now all of the sudden they will no longer show up in the organizer or rather there is the icon with a question mark, and the "mssing file" error. When I use the downloader from my card reader I can see them in the preview screen, but when the downloader is done and the files are in the organizer, get nothing but the aforementioned icons.
I installed to the DNG converter as suggested, but that did nothing as well. So, I finally gave up, purchased PSE 12, installed it and guess what, still no luck. I have updated the RAW converter to the latest version and as near as I can tell I have done everything suggested. Like I said earlier, I can see the pictures clearly in the adobe downloader when I import the files from my memory card and I can open the pics fine in the Canon software, I can even open the picture in the Editor if I go through the editor; but I can't do anything with the picture in the Organizer.
Trying to redo a disc I did in 2006 on a previous program. When I go to capture and then import, it shows 2 files, title and chapter. They are both the exact same thing? Is there any particular reason for this?
I am getting an error "Unrecoverable Error" when I try to import a .dxf from Autodesk Inventor. I have tried saving as different versions of .dxf with the same results. I am using Version 16.2.0.998 of Corel Draw X6
I have been experiencing an error message from Windows Media Player when attempting to skip ahead (fast forward) with MPEG-4 HD files that I am creating with VideoStudio Pro X5. After the new MP4 HD file is first created (this can take anywhere from 30 minutes to 3 hours depending on the length of the clip, which are between 15 and 40 minutes), I open the file to view it in Windows Media Player. It starts playing normally with no problems, but as soon as I click to skip ahead on the timeline bar, an error message displays stating "Windows Media Player encountered a problem while playing the file". In the last 10 attempts or so I have only been succesful in creating one MP4 HD file that allows skipping ahead... I am not doing anything differently (that I am aware of, at least) when I "get lucky" and manage to create a file that does not generate the error message, and after burning the last 9 hours on three more failed attempts I decided to check
I am getting “Error: 4 – Corel VideoStudio files have been damaged or modified. Please reinstall your original source.” with VS Pro X6 trial download. Install runs normally. But when I try to run the software, I get the above error immediately.
Things I have tried:
- Uninstalled from control panel, followed by cleanup tool (VSX4_Cleanup. Is there a more recent version for X5 or X6 ?)
- Deleted the Setup Files folder “Corel VideoStudio Pro X6 Setup Files”, and cleared TEMP files. Rebooted
- Downloaded installer again and repeated install. Rebooted. Tried to run. Same Error
- Confirmed “Protexis Licensing V2” service is running
- No prior version of the software was ever installed on this system
- Running Win 7 Pro x64 SP1. Thinkpad T420 with integrated graphics.
Having an issue with an unspecified error (5.0.0) when burning DVD to file.
I've created the project as a single Mpeg-2 file as suggested...then added chapters and a DVD menu etc. When i burn it gets to 99% then as it's finishing... Boom... Unspecified Error.
I'm having a hard time creating MP4 HD files. It's always gone well, but recently it seems that I get to around 99% rendering, and then it crashes. I get the message "The program has encountered an unspecified error and has stopped functioning"
I'm running an older dual core intel T2080 CPU with Vista, nothing fancy. It seems to happen with videos that are around an hour and a half. If I keep my videos to around an hour it will complete the rendering process. I am able to see the final 8GB file that was created, but it won't play as the rendering wasn't 100% finished with the longer video. This whole thing happens on different PC's so it's not my program installation.
I scanned a document and saved it as pdf, then i tried to import/open it with xara photo & graphic designer 7 and i got an error saying that "this page could not be imported"
could it be from the scanner itself such as restrictions from settings ?
I am trying to import a DWG from AutoCad 2010 (PC) into Maya 2013. All I get is an error. I was searching trough the web and have found no solution to this.
My work PC has been replaced with a fresh copy of Windows and Autodesk 3dsMax 2013 installed. When I try to import files I was importing prior to the installation of the new PC it provides me with the following message:
"The error code reported is eInvalidSymbolTableName"
I have already installed the Product Update 6 however the issue still remains.
Software: Autodesk 3dsMax 2014 - Service Pack 3 (64-Bit)
I am attempting to import images from a memory card via a card reader, using Copy in the Import dialog. The destination folder is on an external hard drive. There is no second copy, and I have deleted any previous second copy destinations.
LR can see the images on the card, but when I select Import, the progress bar moves along and a few hours later there are no images either added to the catalog nor copied to the external hard drive. If I watch the destination folder in Finder I can see that there are a whole lot of temporary folders being made and erased each with the file name of the photo, but there is no permanent transfer of data to the external hard drive. The error message is as follows "lightroom 5 could not copy a file to the requested location" and there is a list of the numbers of images (which is all of them) that were not copied or added to the catalog.
I have tried a different card reader. I have checked and double checked that I have read and write permissions on the external hard drive. I have checked that I have read and write permissions on all the Lightroom folders in the Application Support folder.
To make matters worse when I purchased LR5 upgrade initially I was able to import like normal on both of my computers, and today neither one will allow me to import via LR. I have not imported images for about a month on either machine but prior to that there was no problem.
I am able to add photos to the catalog from the external hard drive once transferred from the card, but I wanted to avoid this for time management reasons and also because I like to rename on Import.
Today when I was attempting to make some gifs in Photoshop, I ran into a problem. When I load the video and then create the frames, either all of the frames are black or only half of the screen (within the video) shows up. I am attempting to use videos in the Windows Media Player format which has worked in the past for me and even videos that I have used to make gifs before are not working. I have also updated Photoshop to the most recent version and am running Photoshop CS6. URL....
I always get an error "The following files were not imported because they could not be read. (152)" when try to import photos from my iphone 4s and nikon p310
I have to import useing image capture or use a card reader
shot video at 120 fps HD MP4 NTSC/HD (720 not 1080), with an Lumix FZ200 camera. Saves to hard-drive with Panasonic software. Plays proper in VLC. Video Studio closes down when attempting to import it to the library,when in the edit mode. I can import jpegs or regular videos no problem. Using VSx4. This should be like using video shot with a GoPro Hero3.
We don't have a functional work around for this yet. We're using C3D 2014 (IDSP). We can get this error importing styles into some existing CAD files, but not all. We can create a brand new, blank drawing and attempting to import these styles will cause the error. The error occurs during the 'verifying imported styles' progress bar in the lower left.
We thought we were getting somewhere when we exported to dwg 2013 format and opened that and we could then import styles with no issue. Unfortunately, in exporting to dwg 2013 format, we lose all of our surface and point data. Doing a saveas to 2013 apparently does nothing more than just save the drawing and that will still not allow importing of styles.
how to get our style templates to successfully import into all of our CAD files.
I have tried to import a DGN file into AutoCAD 2013 both plain jane and the verticals. I am trouble shooting at the moment gathering more information but so far this is happening to me and another computer in a different office as well.
I get the following error when I try to import a comma delineated CSV file into Geotechnics 2013. When I first ran Geo technics I received 15 errors. I made changes to the csv file and now I get 15 errors in a different location.
I've included the 2 CSV files.
Example of the error message.
Error 0 The CSV appears to be corrupt near record '332' field '3 at position '1044'. Current raw data : ' 1020 SB,29,34,GRAVELLY SAND medium grained gray waterbearing medium dense 1020 SB,34,36.5,GRAVEL WITH SAND gray waterbearing medium dense 1020 SB,36.5,41.5,GRAVELLY SAND medium grained gray to brownish gray waterbearing loose to medium dense 1020 SB,41.5,52.5,SAND WITH GRAVEL medium grained gray waterbearing medium dense 1020 SB,52.5,58,SAND a little gravel fine to medium grained brownish gray waterbearing medium dense 1020 SB,58,63,SAND WITH GRAVEL medium to fine grained gray waterbearing dense a lens of fine grained sand with silt [code]...........
I am encountering an issue during importing a model from DWG file to 3DsMax. There is an error pops up "Unable to Attach this file....". I have attached the picture of the error (Capture.PNG).
I have also attached the DWG file for reference. I don't see anything wrong in the dwg file.
