shot video at 120 fps HD MP4 NTSC/HD (720 not 1080), with an Lumix FZ200 camera. Saves to hard-drive with Panasonic software. Plays proper in VLC. Video Studio closes down when attempting to import it to the library,when in the edit mode. I can import jpegs or regular videos no problem. Using VSx4. This should be like using video shot with a GoPro Hero3.
View 5 RepliesI recently purchased Video Studio Express 2010 and cannot import avi files that were created using a Flip. I have tried importing them from both my hard drive and a flash drive. VSE does not recognize the avi files on either drive. I have been able to import mpg files without any problems.
View 6 Replies View Relatedjust purchased PaintShop Pro X3 and VideoStudio X4. I have a Panasonic camcorder which writes to mini DV tapes and has Firewire output. I previously did my editing using iMovie on an ageing Macbook. My new Windows 7 laptop doesn't have a firewire port therefore I was hopeful of capturing the raw footage on the Mac and then importing it into VideoStudio on the Windows laptop. When I try and import the .dv files created by iMovie I get the error 'File format mismatch'.
The videos play fine on the Windows laptop so I don't understand why VideoStudio can't read them.
I was thinking I could perhaps use something to convert the videos to a format readable by VideoStudio.
I am new to using Video Studio Pro. I would like to animate my Paint Shop Pro png files or gif files with Video Studio. I figured out how to make the video work and figured out how to change the speed on individual frames. My problem is saving the project. I can only save it as a VSP file and it is too big to upload to Photo bucket. The whole animation is 15KB.
Can you change the save as file extension to include animated gifs?
I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
I watched the Corel X5 Pro demo of someone importing a DVD on video, but when I insert either +R/W or vanilla DVD disc with home generated content from a few years ago VideoStudio Pro X5 doesn't import. The Capture - Import from Digital Media finds the files on the DVD and even displays them and can preview, but I never get the "import" button going live.
View 2 Replies View RelatedI've discovered I have some video effects, like "Film Express" (which happens to be a NewBlue effect) in VSX2 that I don't have in VSX4. I'd like to use it but don't know how to import it and don't know where to find it, either. how I might move it over?
View 5 Replies View RelatedI have a Sony Handycam DVD403 that works great even though it is old. Was trying to import the mini DVD into X3. In the picture below you can see that X3 recognizes it, but the import button is grayed out.
Not sure the best way to go about this. I did not want to reinstall the Sony Picture Package software that never worked real well in the first place, but that is how I was able to import it into VS11. I was kinda hoping X3 would just import it and I would not have to use Picture Package. How to import my mini DVD's? The folders are:
DCIM
Video_RM
Video_TS
importing DVD's in VS-ProX5. I currently have both versions 12 and 15 (Pro X5) installed on my computer. In version 12, if I import or capture a DVD through the VIDEO_TS folders it will give me many options for what I want to do with the DVD Folder. It will let me see my audio options, let me choose to include or exclude subtitles and even change to a different angle, which I have never used. So a home video that I am trying to import in ProX5 does not even give me the choice! It just inserts the subtitles for me! The problem is that this time I didn't want the subtitles since my movie is in English and the subtitles are for my non-English speaking family members..Where on the new VS is the option for choosing subtitles? I can't believe it's not there and that Vs12 is more advanced than VS15..
View 1 Replies View RelatedI finally have my project done. I click Share, then try to change the bitrate lower it says I am 2.5gigs over. When I change it nothing happens on the left side, it still stays the same. Also it does not import my chapters that I have set in the editing mode?
I have saved it to a video file, in case it may be easier to do it that way? I have a difficult time finding it in the their programs library. X12 use to automatically import your chapters from the editing mode when they were set.
Either I am confused (which can be easy) or it is more difficult to figure things out in X3.
Is there any way to import the extra angles from a DVD? There is only one box to check for each chapter but the additional angles are listed in the box above the preview window. I thought maybe clicking on them would do something but it didn't. I also tried "Select All" but only the first angle was copied.
View 7 Replies View RelatedWill I have problems editing video if some of the video is shot at 30 fps and action shots are recorded at 60fps? Do I need to import the video shot at 60 fps in a separate folder and or keep them separate from the 30 fps segments for editing purposes? How do you get the final project properties to match the inputed video if they are different? I am planning on shooting most of the video at 30 fps but would like the action shots at a higher frame rate for slow motion etc. How is this accomplished, or is it no big deal? I want to know before I shoot all the video so I don't have a problem later.
View 3 Replies View RelatedI am using Corel VideoStudio ProX4 to build a small movie and am having a problem with AVI files. When I go to Step 2 Edit, and click on the folder icon to "Import Media Files" I can see a set of mp4 and avi files I would like to use in my project.
The mp4 files open fine and play just fine. The avi files were opening fine last night, but would play in a jerky manner when an audio track was laid over them. I blew away that project and today tried to go to Step 2 Edit, Import Media files, and tried to import the avi files again now I get this message:
File format mismatch
1081:1:3
It will no longer let me import, play, edit the avi files. These files play fine in Windows Media Player so I'm not sure what is going on. I just installed Service Pack 2 yesterday, and I'm thinking this may be causing the problem.
I am in the middle of doing a video for my father in laws 70th , And have hit a problem every time i import or add a video to vs x2 it shuts down , its fine with photos , Soon as i add video it shuts down i thought maybe it was a codec problem and installed k-lite full pack but still no change.
View 4 Replies View RelatedI have multiple .VOB and other files in a "VIDEO_TS" folder that I can't import using either the "File/Insert Media to Timeline" or the "Capture/Insert Digital Media" function of this VS Pro X2 software version. In both attempted instances I am presented with a error message that reads: 'Not a valid DVD Volume. Report ID: 0x8000408fe(2302)".
As background, these .VOB originated from my own personal DVD's recording that failed to "finalize" due to an electrical disconnect with that Liton recorder, or software failure. Using the Isobuster software, and the page 3 instructions for it found on the excellent website of [URL] ..., I created the file that I'm attempting to import into VS. I don't believe this remedial step of using Isobuster is the cause of my VS problem, as the .VOB files it created are functional as proven by their playing in VLC media player software. Thus, I don't want to be chasing ghosts along that path, unless you can be certain that is where I should be going.
I have just moved to VSP5 from 4 and am having difficulty importing .cr2 files in Capture. Same photo files go satisfactorily into v.4 but are apparently ignored by the new version. Am I missing a setup or preferences step?
To make this point more specifically: I have created test folders containing mixed .mov, .jpg and .cr2 files - only the .mov are recognised. I have also created a test folder containing only .jpg and .cr2 files. On Capture, VSP5 reports "There is no valid content".
I'm looking to import an existing project into another, I want to do this because then I can move the files around and edit them individually rather than creating an .avi and importing that video onto the timeline. Is there such a command?
View 2 Replies View RelatedI'm running VS Pro x4 and I'm trying to import a video that I got from a homemade DVD which was created from a VHS tape. When I import the file to VS, the video is fine, but it thinks there's no audio with it. If I play the file in iTunes, then it has audio.
The video file's specs are as follows:Kind: MPEG-4 video fileSize: 324 MBChannels: Stereo, Dolby Digital 5.1Encoded with: HandBrake 0.9.6Video Dimensions: 634x480Video Codec: H.264What am I doing wrong?
I am trying to capture video from our camcorder dvd (Canon DC210). When we use VS11, it gives us the option of importing each title (time splitting) or all as one title. I can not find out how to do the same thing with VS X3, it only gives us the single title, all clips joined as one.
View 12 Replies View RelatedUsing X5 I was importing a .MTS file, something I have done successfully many times before. This time X5 produced a .DMP file with the message to copy the file to Corel for assistance.
How do I contact Corel and copy the file to them? The error message was:
c:userspaulappdatalocal empvstudio_15.1.0.34_20120604_153459.dmp
Just purchased VideoStudio X6 Ultimate and I am having some issues importing files either into a time-line or into a library. I have put the different days into different directories to aid me putting a DVD together. The files are mixed AVI and JPG files and some directories will import and others will not, the files were all collected within days of one another on a holiday using the same camera. I am importing using the capture tab then import from digital media button, this correctly gives me the select directory box but when I try and import certain folders I get a Microsoft Visual C++ Runtime Library error and a request to close the program.
The error states that "this program has requested the Runtime to terminate in an unusual way". I have tried moving the files to other directories, split them up and even tried to import one JPG from an affected directory with the same result.
I am running Win 8, with 8Gb of memory and 1.6 Tb of free hard drive space.
I am attempting to import audio into VS5. The file is named VTS_01_3. I have the music file as MPEG layer-3 audio [MP3]. The music plays fine with AVS and Windows Media Player.
The music was ripped off of a DVD initially but appears to play OK but on attempting to bring it into VS5 using Import from Digital Media I get the dialogue box "There is no valid content".
I have a old version of Ulead video studio 10.0.0110.0 SE and would like to import recorded video from my camera but it breaks the files down into separate clips and would like to import them all at once. Is this possible or do i need to manually delete the ones I don't want and import the ones I do want. The connector is a AV cables to USB to PC.
View 7 Replies View RelatedI'm trying to import a AVI file (its not DV) into VS but it comes up with the error message "xxx file is inaccessible" followed by the message "This file cannot be added to the project due to unknown file format or not enough memory or copyright".
I tried to play it in Windows Media Player but it came up with an error message about missing the required Codec. I installed the required codec (using MediaInfo advice) and Windows Media player can now play the file but VS still can't import it. The video stream of the AVI file is MPEG-4 (DivX 5). I would have thought that once I installed the correct codec for the Windows Media Player that VS should work with that file format?
I am using a Flip Slide HD video camera. After importing the videos into Corel VideoStudio, a video that should be 25 seconds long only plays 12 seconds of the video. The big issue is that the rest of the video is not there. It's almost like someone cut part of the video off. When I play the video on the camera and on my desktop with Quicktime, it plays the entire video. After I import the video, it is cut in half again.
View 4 Replies View RelatedI'm trying the demo version of MotionStudio 3D. So far it looks very powerful and much easier to use than Graffiti. It allows you to export a project directly to the timeline in Video Studio. I wanted credits superimposed over another scene and I wanted the credits to fade in and fade out. So I put the exported titles onto track 2 in VS. I set the allignment options in VS to "fit to screen." The middle part of the clip where transparency=0 looks great. But the beginning and end, where transparency=100, instead of the title being disappearing, it turns black.
If that doesn't work, is there a way I can use VS to accomplish the same fade-in / fade-out of something on track 2? You can specify transparency for the clip on track 2, but that appears to be just one value for the entire clip, not something you can modify with keyframes.
I am having massive issues with my brand new version of VideoStudio Pro x4 crashing when I try do to the following : import jpgs, create a video file, upload a file to youtube (it will create the mp4 file but says cannot create the waveform). I am running this on Windows Vista Sony Vaio All in one with a 2.5 ghz processor. I am trying to create a 6 screen split screen video. It also seems to be degrading my vid quality. I tried to submit a case to your support team and both times it says case failed.
The errors I am getting is "unspecified error, send dump file to Corel for analysis."
Then it shuts down.
I am planning to wipe and reload this puter and set it up for Windows 7 , I know I have one issue with uploading ( I have something in the background that is choking my upload speed. yes we have run everything to figure out what it is, when I run it in safe mode I don't have the problem."
The all in one does not have a graphics card but that should not be causing issues with importing jpgs.
I've been using WMM for all my productions and have had problems currently. With the importing of clips, audio and burning of DVD's. When I first started making home movies I dabbled in the VideoStudio Pro x3 and thought it was too complicated. Now I'm wanting something more and have decided to try and use it.
So here's the question. I notice that I do not have the Burn option on my menu. Again this program came on the computer when I purchased in 2011. I'm running an HP Laptop with Windows 7 premium vista if that sounds correct. Not too savy on computers but learn as I go. Wondering if this program is a scaled down version of the StudioVideo Pro x3 and have to add that feature somehow.
I previously used VideoStudio 10 to capture and then edit my DV Camcorder files, this was on Windows XP and I never had any trouble with this. I have just captured my final DV tape with this camcorder (I'm about to get a new camcorder) on this old PC, however I have now got a new Windows 7 PC, and am now trying VideoStudio Pro X4. I have moved this captured AVI file to the new PC but as soon as I try to import it into VideoStudio I get the following:
File format mismatch
1081:1:3
I have used some other software to convert the AVI file into a DVD compatible MPEG2 file, so I guess I could do my editing on this instead if all else fails?
I have tried to add JPG images off my laptop to Video studio and every time I attempt to import an image into it, it comes up with a message the runs along the lines of ''unable to open file, file format mismatch, [16803:1:3]''. I took the pictures with my Canon G9, but I also took video with my G9 and strangely enough the video will import and play. I do really like the Corel software and I am disappointed that this problem has occurred.
View 12 Replies View RelatedTrying to redo a disc I did in 2006 on a previous program. When I go to capture and then import, it shows 2 files, title and chapter. They are both the exact same thing? Is there any particular reason for this?
View 3 Replies View Related