I have a old version of Ulead video studio 10.0.0110.0 SE and would like to import recorded video from my camera but it breaks the files down into separate clips and would like to import them all at once. Is this possible or do i need to manually delete the ones I don't want and import the ones I do want. The connector is a AV cables to USB to PC.
View 7 RepliesI would like to convert my recorded mp4 videofiles with Corel Videostudio X3 to for example a DVD. The mp4 file is from a Sony DSC-H5 photocamera. It is HD quality not 1920 but i believe 1440 or something like that. What are the best settings to convert the mp4 to DVD without losing quality?
View 6 Replies View RelatedI am new to VSP X5. I want to edit a music video that I recorded live. The live recording of the music was fine but I need to cut and paste new video clips in certain part of the songs in the video timeline. I split the audio from the video.
I am having a hard time trying to sync the audio because every time I cut the video clip, the video keeps snapping back, making audio out of sync. Also, when adding transitions, video clips automatic shrink. I tried enable ripple, video still snap back. Is there a setting in the preference?
As the title says.. if I have a video, say for instance MPEG-4 1920x1080, rendered by Videostudio, and I multitrim it, then render it again using the 'Same Settings as First Clip' setting - is the video re-coded, or do I maintain original quality and the different parts are just effectively joined together?
View 2 Replies View RelatedI have been copying a number of pre-recorded video clips onto a DVD-R disc and playing them on my DVD recorder. As my Panasonic DMR-XW380 DVD recorder only plays DivX or XviD video files I have to convert the files I have to this format.
We have a Sony Bravia 40" TV and I was wondering about the best settings I should use for the Frame Resolution and bitrate etc. When I render anything to DivX with VS I use a Frame Resolution of 720 x 576 and a bitrate of 56kbps and this seems to play okay in my setup. Do you think these settings could be improved?
Will I have problems editing video if some of the video is shot at 30 fps and action shots are recorded at 60fps? Do I need to import the video shot at 60 fps in a separate folder and or keep them separate from the 30 fps segments for editing purposes? How do you get the final project properties to match the inputed video if they are different? I am planning on shooting most of the video at 30 fps but would like the action shots at a higher frame rate for slow motion etc. How is this accomplished, or is it no big deal? I want to know before I shoot all the video so I don't have a problem later.
View 3 Replies View RelatedI am in the middle of doing a video for my father in laws 70th , And have hit a problem every time i import or add a video to vs x2 it shuts down , its fine with photos , Soon as i add video it shuts down i thought maybe it was a codec problem and installed k-lite full pack but still no change.
View 4 Replies View RelatedI'm running VS Pro x4 and I'm trying to import a video that I got from a homemade DVD which was created from a VHS tape. When I import the file to VS, the video is fine, but it thinks there's no audio with it. If I play the file in iTunes, then it has audio.
The video file's specs are as follows:Kind: MPEG-4 video fileSize: 324 MBChannels: Stereo, Dolby Digital 5.1Encoded with: HandBrake 0.9.6Video Dimensions: 634x480Video Codec: H.264What am I doing wrong?
I enjoy the Video Studio Pro X5 over X3 and I finally got the machine to accept the driver for the samsung minidvd video camera. I selected capture video and started playing the video and hit start capture. It appears to work, but it only records and saves maybe 30 seconds of video. I did a 15 minute tour of a cave but less than 30 seconds of the video is saved.
View 14 Replies View RelatedI am using a Flip Slide HD video camera. After importing the videos into Corel VideoStudio, a video that should be 25 seconds long only plays 12 seconds of the video. The big issue is that the rest of the video is not there. It's almost like someone cut part of the video off. When I play the video on the camera and on my desktop with Quicktime, it plays the entire video. After I import the video, it is cut in half again.
View 4 Replies View RelatedI used the old video studio several years ago and I have just recently upgraded to this version. I have also purchased a new sony Video Camera the HDR-CX560V. Unfortunately, the software doesn't recognize when the camera is connected via USB cable.
View 4 Replies View RelatedI use two cameras to capture video. I have been using my Sony DCR-SR47 Almost since the day I bought VSX3. I am still using both. However I am now having stuttering in the audio. I do not have to render the video. I can import the video and play a clip fine, once I trim it then do a playback without rendering it I get the stutter. It occurs at regular intervals.
Here is an example [URL]..........
The audio is also giving me a "reverb" effect. Like a barrel effect. This is the input format of the footage. This is the output footage
Here is another example, here I converted to AVI, yet same effect. [URL].......
Output: Using Windows XPSP3 with all current updates. And have all codex installed. I did switch from using CCCP codex package to K-Lite recently.
I have a new notebook with intel I7 processor, 8 GB memory and 500 GB 7.200 drive. I captured successful the video from my Sony camera, cutted the video, produced a DVD and enjoyed afterwards the video. To back-up the video on a tape normally I generate a video file in my Video Studio x3 (latest version) and transfer it back to the tape on my video camera. This isn't working in the right way due to stuttering after 10-15 minutes transfering back. After restarting the transition the time until stuttering starts is then less then 10 minutes, next time less then 5 minutes.
View 12 Replies View RelatedHave just installed Video Studio ProX3 on a new computer running Windows 7. Software much the same as VS 10 which I ran on a computer with XP.
The new system does not want to connect with my Canon MV930 Video camera. - if it does the picture is frozen and the message - 'Inconsistent vidoe from capture source' appears. Or I get the message - 'No video input source' detacted' appearing.
Could the problem be with the Firewire card/drivers taken from the old computer? - am having this checked out to-day.The software downloads vidoes from a DVD produced by me on the old system quite happily.
Is there A away to Use the Camera Record button to Control the Recording and Pausing of the Captured Video within Corel?
View 3 Replies View RelatedI have a DVD that was made from transferring a VHS PAL tape to a DVD. I can't see how to input the contents into VSProX4.
I downloaded Wondershare and that was easy to use to create an input file and I used VSProX4 to edit the file and make a 2 minute clip which I put on Youtube. The problem is with that the Watermark "Wondershare" is shown on the clip. I assume I need to spend $50 to buy a copy of Wondershare to not have the Watermark.
I tried a download of Handbrake. That created M4V files but it doesn't seem as though those files are compatible with VSProX4.
It would seem to me a basic requirement for a Video Editor to pull in a video from an existing DVD. I didn't think I would need to look for a program to RIP the DVD. What am I overlooking??
On the DVD there are 7 files. 2 *.BUP files, 2 *.IFO files and 3 *.VOB files. With either of the two programs I used above to RIP the DVD I think I saw 17 or 19 chapters.
I would like to know how many MINUTES (approx) of video recorded in highest quality 1080/50p video on a 32Gb SDHC memory card.
I have found a web site which suggests that 5 hours 20 minutes can be recorded with the camera's in built memory (32Gb) yet only 2 hours 40 minutes on a 32Gb SDHC memory card. I cannot understand why the inbuilt memory can store more than twice as much as on an equivalent size SDHC card.
What I am proposing to do is this: I have been asked to do the video for a friend's wedding. I would like to use a seperate audio recorder to record the audio of the wedding while I do the video on my camcorder. Then import the seperate audio track into VS X4 and sync it up with the video. The reason I am going to this extra trouble is that the built-in microphones on my camcorder are not that great unless I am "up close and personal" with the subject of the video. I have tried a short clip using an old MP3 player that records mono sound files and it appears to work well for the short video clip. What about with a longer clip, say up to an hour? If so, were there any problems keeping the video and audio tracks in sync?
View 2 Replies View RelatedI have recorded my bowling action (the English game of cricket, where you throw/bowl the ball the the batsmen). It was recorded side on to my run up. I wanted to measure my speed, so I thought, using 2 consecutive frames from movie maker, giving a time of 0.04 sec. Then using Pixlr(free photoshop), overlap the two frames, and measure the pixel distance the ball has traveled. Then I use the diameter of the ball (known) to measure how much distance each pixel is in real life. Then I calculate speed.
This should be accurate, with the only uncertainty coming from the pixel measurements. The results so far have me questioning if there are other factors I have missed, I got most of readings at 40mph, this is very slow, spinners bowl at this speed, I have been told I am faster, then I have one reading at 75mph. The fast one showed really good technique, so is why is that fast, but the slower ones shouldn't be that slow.
Can the new version of studio pro handle movie clips recorded at 24FPS?
View 14 Replies View RelatedI recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
I'm trying to import photo's taken on a Canon EOS Digital Rebel XS, in a camera raw format with a CR2 file extension. No luck - the pictures are greyed out on the import screen. Added the Camera Raw program, version 7.4. Didn't find our camera in the supported camera's list, but there are plenty of Canon EOS Rebels in there, so thought we'd take a chance.
View 2 Replies View RelatedI have a LIVE show recorded and I want to add Video Filters in various places within a single 4 minute video. Do I need to cut up my video to segments to add filters too or can I apply them to different spots in a single video?
View 5 Replies View Relateddo any camera setting (portrait , landscape,contrast,saturation,etc,) matter when importing raw.
View 2 Replies View RelatedI have PSE 11 and it will not import Canon RAW files directly from the camera. It only "picks up" the jpg files. However, it does recognise Canon RAW files which are already on my hard drive.
View 12 Replies View RelatedI always get an error "The following files were not imported because they could not be read. (152)" when try to import photos from my iphone 4s and nikon p310
I have to import useing image capture or use a card reader
I am on Lion 10.7.4 and LR 4.1
I changed Adobe Elements version (from 10 to 11) and Brand New all-in-one Dell XPS computer that comes with Windows 8 as OS (From XP SP3) ... Now my import in Adobe Organzer gets stuck. Adobe Elements sees the camera, and compares the files on my camera to the photos in Organizer and knows how may are duplicates. I then select all the photos it finds as Non-Duplicates and tell it what directory to import into and select (Finish/Import) and it just sits there. I can change anything on that screen for options, but it really is locked up. I have to use Task Manager to end the task so that I can get back into Adobe Organizer.
View 4 Replies View RelatedIs there a way to import my raw file with the camera picture settings from my camera. I use a personally edited version of the camera vivid from my d300. The files are imported without the settings and get set to adobe standard in my camera calibration. I use lightroom 4 with cs5 64 bit.
View 4 Replies View RelatedLR 3.6 has worked OK before, but now stopped importing photos (jpeg and raw) from my cameras (Canon 5D Mk 3, Canon Powershot 100). Program goes to "does not answer" - status and must be closed. The problem seems to be similar in my Elements 8. Importing from my Canon G10, LR says that there is not preview available, but importing succeeds. All cameras import photos to Windows (7) or Picasa normally.
View 4 Replies View RelatedWhen I import photos using iPhoto or Aperture, I get an option to delete them off the camera when the import completes. That feature is really useful when there are deveral hynred photos in memory. How do I accomplish the same thing using Lightroom 4?
View 22 Replies View RelatedGPS meta data does not show up when importing from a Sony a99 camera.
View 5 Replies View Related