I used the old video studio several years ago and I have just recently upgraded to this version. I have also purchased a new sony Video Camera the HDR-CX560V. Unfortunately, the software doesn't recognize when the camera is connected via USB cable.
View 4 RepliesHave just installed Video Studio ProX3 on a new computer running Windows 7. Software much the same as VS 10 which I ran on a computer with XP.
The new system does not want to connect with my Canon MV930 Video camera. - if it does the picture is frozen and the message - 'Inconsistent vidoe from capture source' appears. Or I get the message - 'No video input source' detacted' appearing.
Could the problem be with the Firewire card/drivers taken from the old computer? - am having this checked out to-day.The software downloads vidoes from a DVD produced by me on the old system quite happily.
I use photoshop cs4 and a Nikon D300s. I updated camera raw 5.4 and photoshop does not recognize the raw files.Lightroom 3.6 does not recognize the raw files either.
View 2 Replies View RelatedTaken video clips with that camera? It uses mpg4 ACE (which is not a codec known to VideoStudio) and my PC tells me that the clips come at 30.05 fps. What can I do now? Why the clips aren't 29.97 fps?
View 2 Replies View RelatedUsing the trial version of VS X4 I am trying to get it to recognise my Panasonic HDC-HS700 video camera so I can use stop motion and onion-skinning. It recognises my webcam straight away but not the video camera.
Have been advised by email from Corel Support that in this case I should "use import from mobile device or import from digital media to capture from this camera." Unfortunately this will only read stored images from the camera's 250GB hard drive, when what we need is for the camera to be in its still picture recording mode so that each one can be checked by onion-skinning before proceeding to the next shot.
Have also seen somewhere that a video camera needs Firewire in order to be able to communicate with VS X4. The Panasonic has a socket marked with the IEEE 1394 three-pronged symbol, but the other end of the supplied lead has a USB plug on it.
Is it going to be possible to get high quality stop-motion videos using VS X4 and the Panasonic HDC-HS700?
There's a whole lot of lost souls on YouTube asking similar compatibility questions on "Corel VideoStudio Pro X4: Stop Motion Animation".
I have a video clip from you tube that when I load it into VS it only recognizes 2:20 minutes vs. 2:50 minutes that shows in windows media player. Why doesn't it recognize the full length?
View 1 Replies View RelatedI have tried reinstalling LR - still doesn't work. It says all products uptodate as well.
My Mac can read the files fine and displays them correctly in iPhoto
I enjoy the Video Studio Pro X5 over X3 and I finally got the machine to accept the driver for the samsung minidvd video camera. I selected capture video and started playing the video and hit start capture. It appears to work, but it only records and saves maybe 30 seconds of video. I did a 15 minute tour of a cave but less than 30 seconds of the video is saved.
View 14 Replies View RelatedI have a old version of Ulead video studio 10.0.0110.0 SE and would like to import recorded video from my camera but it breaks the files down into separate clips and would like to import them all at once. Is this possible or do i need to manually delete the ones I don't want and import the ones I do want. The connector is a AV cables to USB to PC.
View 7 Replies View RelatedI use two cameras to capture video. I have been using my Sony DCR-SR47 Almost since the day I bought VSX3. I am still using both. However I am now having stuttering in the audio. I do not have to render the video. I can import the video and play a clip fine, once I trim it then do a playback without rendering it I get the stutter. It occurs at regular intervals.
Here is an example [URL]..........
The audio is also giving me a "reverb" effect. Like a barrel effect. This is the input format of the footage. This is the output footage
Here is another example, here I converted to AVI, yet same effect. [URL].......
Output: Using Windows XPSP3 with all current updates. And have all codex installed. I did switch from using CCCP codex package to K-Lite recently.
I just installed Video Studio Pro x5. When I load a .avi video it doesn't play. When I click play after I imported the file, the screen is black. If I play the avi in windows it works. How to get it visible so I can edit it it in x5?
View 5 Replies View RelatedI have a new notebook with intel I7 processor, 8 GB memory and 500 GB 7.200 drive. I captured successful the video from my Sony camera, cutted the video, produced a DVD and enjoyed afterwards the video. To back-up the video on a tape normally I generate a video file in my Video Studio x3 (latest version) and transfer it back to the tape on my video camera. This isn't working in the right way due to stuttering after 10-15 minutes transfering back. After restarting the transition the time until stuttering starts is then less then 10 minutes, next time less then 5 minutes.
View 12 Replies View RelatedIs there A away to Use the Camera Record button to Control the Recording and Pausing of the Captured Video within Corel?
View 3 Replies View RelatedUsing VideoStudio X4 Ultimate 14.2.0.23 I have the following issue:
When doing a crossfade between video clips, the audio crossfades just fine in the preview of the edit screen in X4. However, after exporting to DVD 14:9 format, in the resulting MPG video the audio of the first clip correctly fades out, while the audio of the second clip doesn't fade in... it just jumps in.
I have Photoshop Elements 9 and just purchased the RX-100. Currently the .arw raw files the camera produces are not supported in Camera Raw. When will Adobe be supporting this format?
View 1 Replies View RelatedIS there an update for Elements 11 to enable the Sony A7R camera RAW file to be used within Elements
View 1 Replies View RelatedGPS meta data does not show up when importing from a Sony a99 camera.
View 5 Replies View RelatedCan elements11 work with raw images from a Sony DSC-RX100 camera?
View 1 Replies View Related i have a sony nex 6 camera. i would like to know if the latest photoshop of lightroom supports this camera and its RAW file - ARW?
If not, what do you recommend i do? i want to avoid having to compress the images, if that would reduce quality.
One of the great features of the Sony NEX-7 is that the NEX-7 makes automatic lens corrections for vignetting, chromatic aberration and distortion problems. These corrections are written to the file and the preview. However, when converting these images from ARW to DNG the correction data seems to be lost, and the images revert to their uncorrected state. This requires all images to then be re corrected with the Adobe lens profiles, which is both tedious, an extra step, and also seems to produce results that are somewhat less optimal than the original corrections made by the camera.
Should not the ACR Converter and Lightroom retain the lens corrections made by the camera?
For some reason this lens isn't recognised when one choses the 'Enable Profile" box; yet if one perserveres though the Make/Model dropdowns , the profile is there. Is it perhaps because the lens is sub-named Zeiss? The system recognises my other E lenses at the click of the box. Odd. Lr4.3 on OS X 10.8.2
View 2 Replies View Relatedi down loaded some videos from a sony hand held but there was no sound in any of the videos?
View 3 Replies View RelatedI can see my mts video files in Lightroom 4, but however they do not have sound. Is there anything that I could do to have the sound? (The sound is working for videos that I made with my Nikon 3100 camera, but not for the videos that I made with my Sony camera.) Also, is there a way to light the video files from Lightroom 4 to Adobe Premiere, as Adobe Premiere seems to have more editing capabilities and plays the sound from my Sony videos?
View 3 Replies View RelatedI upgraded from 10 to 11 just so I could do this, but it seems I was mistaken.
View 6 Replies View RelatedAfter upgrading the raw-file, finally video playback from files filmed with this camera is back, but the playback is still silent....
View 2 Replies View RelatedI have lightroom 5.3 running on Windows 7 64-bit. I am unble to import AVCHD video files from my Sony DSCRX-100. I am not sure why, as lightroom 5 supports this video format.
View 1 Replies View RelatedI have done everything I can find on the web (reloaded files, downloaded new files, you name it) and LR5 still won't let me "use" my AVI files. I can see the snippets,, they appear to be there, but I cannot play them, edit them, scrub them, export them etc. Suggestions other than to dump Lightroom (especially since the Adobe chat service is useless)?
View 1 Replies View RelatedPhotshop Element 11 does not recognize the RAW files from my camera what do I need to do?
View 6 Replies View RelatedPhotoshop CC on Mac OS X doesn't recognize printers
View 4 Replies View RelatedEVerytime I try and download ANYTHING, it goes to Photoshop (I have CS4) and says, Photoshop does not recognize this file!... what is a 'nerdy photographer gal to do'?? I have had this problem for about 6 months. I called dear old Mumbai,and of course, he told me that I would have to pay for any info! or go to Adobe support systems.
View 4 Replies View RelatedAcer Laptop
Windows Vista
3 gb ram
160 gb hd
Printer - Canon Pixma Pro 9500
Problem-
I recently installed Photoshop CS4. I still have CS3 installed. When I go to print from CS4, it prompts me that there is no printer installed on my pc. (CS3 will still print without issues). I have downloaded and installed the latest and greatest drivers for my Canon Pixma Pro 9500. I have tried recreating the Photoshop preference file and still no good on either attempted solution. I even tried unistalling CS3 - no good.
How do I "convince" Photoshop CS4 that printer software and drivers exist on my pc?