VideoStudio :: Transfer Video File Back To Camera Is Stuttering?
Nov 3, 2010
I have a new notebook with intel I7 processor, 8 GB memory and 500 GB 7.200 drive. I captured successful the video from my Sony camera, cutted the video, produced a DVD and enjoyed afterwards the video. To back-up the video on a tape normally I generate a video file in my Video Studio x3 (latest version) and transfer it back to the tape on my video camera. This isn't working in the right way due to stuttering after 10-15 minutes transfering back. After restarting the transition the time until stuttering starts is then less then 10 minutes, next time less then 5 minutes.
View 12 Replies
ADVERTISEMENT
Mar 20, 2013
I have been trying to transfer MP4 videos into VSPX5U from an ELGATO game capture card. Every video captured by the capture card is in an MP4 format and when trying to transfer it, my VSPX5U will tells me that "The file cointains no video data".
I understand that the Service Patch is supposed to fix this but after the initial download, it will tell me that "The installed version of the application could not be determined. The setup will now terminate"
View 1 Replies
View Related
May 4, 2011
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
The manufacturer of the flip camera is suggesting that since the footage can play fine with the camera program (Arcsoft Media Impression) the problem seems to be related to the player codec on my computer. They suggested that I download the latest K-Lite Codec Pack to see if that would resolve the problem.
View 2 Replies
View Related
May 24, 2011
This is a new fault which has appeared with Corel Pro x3. When I play clips on the overlay tracks as a project they play faultlessly. When I play them as a clip on any overlay track, there is no sound and it stutters instead of one constant speed. I have installed the program twice now trying to fix this problem. I am editing in Standard Definition. What could be causing this problem? This occurs with all files on the overlay tracks played in clip mode.
My computer is a Pentium (R) D CPU 3.00GHz, 3.25GB of RAM, Windows XP Pro, Intel Motherboard, ATI Radeon HD 5450, 512MB DDR3, IDT Audio. Sony HVR-V1P Pan NVGS400
View 7 Replies
View Related
Apr 24, 2011
I'm using the trial version of CVS X4 and have been impressed so far, but have come into a problem that I have seen others post here, but it's not 100% identical to my problem.
I'm able to view each clip individually without any playback problem upon capture. However, once I drop a clip into the timeline, the clip experiences a very slight but noticeable bit of stuttering/jumping/hiccuping every so many seconds during playback on the timeline. I was hoping that this might have just been occurring in preview mode, but after creating a video file, the problem still exists. This footage was captured using a Flip camera.
I've posted a 1 minute sample on Youtube at [URL] ...... You'll notice while viewing an opening pan of the Welcome sign and footage of the columns the issue I'm inquiring about. I find it very strange that this especially noticeable when a scene is being panned.
Screen Shot CVS Jumping.jpg (39.95 KiB) Viewed 615 times
View 14 Replies
View Related
Sep 27, 2012
Many of my videos seem to be trimming and saving to a file. With a HD video at a high data rate, all I do is trim the video and save back to a file. However, I select the "Same as first video clip" to save to a new file. What I usually do is save the file and use a third party software to reduce the video the data rate I need.
In other to reduce the re-rendering time, I wish both processes could be done in VS's 'Options' button.
View 14 Replies
View Related
Jan 20, 2013
I enjoy the Video Studio Pro X5 over X3 and I finally got the machine to accept the driver for the samsung minidvd video camera. I selected capture video and started playing the video and hit start capture. It appears to work, but it only records and saves maybe 30 seconds of video. I did a 15 minute tour of a cave but less than 30 seconds of the video is saved.
View 14 Replies
View Related
Aug 9, 2013
I have a old version of Ulead video studio 10.0.0110.0 SE and would like to import recorded video from my camera but it breaks the files down into separate clips and would like to import them all at once. Is this possible or do i need to manually delete the ones I don't want and import the ones I do want. The connector is a AV cables to USB to PC.
View 7 Replies
View Related
Mar 6, 2012
I used the old video studio several years ago and I have just recently upgraded to this version. I have also purchased a new sony Video Camera the HDR-CX560V. Unfortunately, the software doesn't recognize when the camera is connected via USB cable.
View 4 Replies
View Related
Apr 26, 2011
I use two cameras to capture video. I have been using my Sony DCR-SR47 Almost since the day I bought VSX3. I am still using both. However I am now having stuttering in the audio. I do not have to render the video. I can import the video and play a clip fine, once I trim it then do a playback without rendering it I get the stutter. It occurs at regular intervals.
Here is an example [URL]..........
The audio is also giving me a "reverb" effect. Like a barrel effect. This is the input format of the footage. This is the output footage
Here is another example, here I converted to AVI, yet same effect. [URL].......
Output: Using Windows XPSP3 with all current updates. And have all codex installed. I did switch from using CCCP codex package to K-Lite recently.
View 13 Replies
View Related
Feb 10, 2013
I have a project with a number of mpg files in it. These mpg files were created using X3 from mts files.
I have done this many, many times. I created an mpg a few weeks ago without problems. Now, all of a sudden, I try to make the same mpg files and the exported video will stutter in places. It doesn't matter how many times I render the same project, the video stutters in the same exact spot. Like I said, I've done this many, many times and never had this problem.
what may have changed or been installed on my computer recently to cause this? I even reinstalled X3 with no luck.
View 5 Replies
View Related
Dec 13, 2012
I own a copy of Corel Video Studio Pro X3. Since installing the patches for it, the sound stutters on the finished videos that I make. Original files are fine. I had this problem on the previous computer I used this program with, and after searching this forum, found a hotfix for it. Unfortunately the hotfix link is no longer working.
View 3 Replies
View Related
Jan 15, 2013
I am having trouble with stuttering video/audio while playing WMV files in VS Pro X5 SP1. Any clip which I try to view will stutter on playback (sounds like a scratched/dirty CD). These files play fine in Media Player Classic. Other file formats (e.g. mp4) play fine in VS, it is just WMV files that are doing this. I don't get any errors, it just doesn't playback correctly.
The WMV files were created within this installation of VS Pro X5 SP1. The original source varies. I've started with .MTS files from my Canon camcorder SD card (reader built into PC), or from mp4 files which I also created from this installation of VS. When I share the files, I get no errors. I've had it happpen with 3 minute files, and with 11 second files.
One example file that does this is:
file size 3,405 KB
Duration 11.064 seconds
Data rate 2481 kdps
Video: Windows Media Video 9
24 bits, 1280x720, 29.970 frames/sec
Audio: Windows Media Audio 9.2
44.100 KHz, 16 bits, Stereo
Aspect ratio 1.78:1.0
Is editable: yes
Project settings are:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 29.97 fps
Lower Field First
MJPEG Compressor
PCM, 44.100 kHz, 16 Bit, Stereo
I've also tried changing the Project settings to this, but the WMV file still comes out as 44.1 and the same issue occurs:
NTSC drop frame (29.97 fps)
Microsoft AVI files
24 bits, 720 x 480, 29.97 fps
Lower Field First
MJPEG Compressor
PCM, 48.000 kHz, 16 Bit, Stereo
Not sure if this is related or not, but when I installed the latest version of VS Pro X5, I started having trouble with windows media player. At the moment, WMP won't play DVD's or WMV files because it says it doesn't have the codec. I'm running WPM 11 on Win XP and it is the most current version.
View 2 Replies
View Related
Feb 13, 2011
I recently purchased Video Studio Pro X3 - and after going through the knowledge base and product read me, I have been unable to find an answer to the following problem I have:
PROBLEM:
I have a number of videos (HD 1080p) that I have recorded. Each video is on average 50 minutes in length - what I want to do it to be able to do is to slice this video into 10 x 5 minute videos (based on topics discussed in the video), (so essentially clip the video into these segments and edit each one) and then when producing the video file - actually create 10 separate video files (all with editing in place) instead of one single large file.
As far as I have been able to work out, I need to go through the whole file, clip relevant sections, edit them, and then save project. I then need to go trim the saved file 10 times, to extract each time the single 5 minute video I want to create. This is a fairly manual and time consuming process, hence my hope that I can create 10 files based on the clips I have made in the larger 50 minute file in one go.
as I have 30 videos to edit, so looking for ways to save time!
View 11 Replies
View Related
Nov 5, 2010
Have just installed Video Studio ProX3 on a new computer running Windows 7. Software much the same as VS 10 which I ran on a computer with XP.
The new system does not want to connect with my Canon MV930 Video camera. - if it does the picture is frozen and the message - 'Inconsistent vidoe from capture source' appears. Or I get the message - 'No video input source' detacted' appearing.
Could the problem be with the Firewire card/drivers taken from the old computer? - am having this checked out to-day.The software downloads vidoes from a DVD produced by me on the old system quite happily.
View 3 Replies
View Related
Apr 13, 2013
I have Canon 60d original footage shot at 1080p 25. The clip is only 9-1/2 sec long. When I play the clip straight out of my pc folder inside VLC the clip is smooth. The moment I import the clip into VS proX5 timeline and straight away, share / create video file / AVCHD / 1920x1080p preset, VS introduces 4 dreaded stutter problems into the render finished product which is very noticeable and ugly to watch.. I am in PAL land and VS was installed to PAL. I have also tried the WMV hd1080p preset and mpeg-4 and the results where just as disappointing.
View 10 Replies
View Related
Apr 3, 2011
Is there A away to Use the Camera Record button to Control the Recording and Pausing of the Captured Video within Corel?
View 3 Replies
View Related
Mar 30, 2011
Is there any way of importing vsp x4 files back into x3
View 9 Replies
View Related
May 15, 2011
I have tried to insert a mp4 video file into the timeline and it just does not see the file and if I navigate to it and try open it does nothing
I have download all patches This videostudio pro x3 came loaded on the laptop the mp4 file is from a olympus sp-800 us - I took it from the sd card and put it in a folder on the hard drive
I read all the things people have written I am not at the point of trying to create file I can not import the file at all
View 13 Replies
View Related
Feb 18, 2013
Is it possible to import a digital video sequence into photoshop and convert it into individual frames, so that each frame can be manipulated individually (drawn into, coloured etc) and then reform the individual frames into a video file for export toAfter Effects, Premier Pro or Avid?
View 3 Replies
View Related
Nov 22, 2010
I am unable to insert a MP4 file from a GO PRO HD camera into the timeline.
i get a " file format mismatch" error message
I have read several posts relating to VS10 & other versions, but not VS11+
i tried changing the file extension to .MPEG-4 but this did not work
file size is aprox 1.7Mb
VS11+
V 11.5.0157.2 Plus
Extra Content Pack
Power Pack
VS11 Patch Eng 122507-03
View 5 Replies
View Related
Sep 15, 2011
if corel video studio x4 can open the mxk file extension from a canon xf300 Camera
View 5 Replies
View Related
Jun 26, 2011
My latest problem is file formats! I have two cameras, one of which produces .AVI video format. I have found that Corel does not "read" this format - or am I wrong? I am working from a card reader. I have succeeded in using the latter files in VS but only by converting to MP3. I don't want to part with this very handy camera so am I missing something in that perhaps I can change some setting to enable Corel to recognise .AVI files? I don't want to have to use the editing suite which came with my Traveller camera. I have found it is easy to load via Picasa - which accepts many formats - but it's when I come to insert media file to the VS library that the trouble starts - obviously because the files are .AVI.
View 2 Replies
View Related
Nov 6, 2013
I recently purchased Corel Video Studio Pro X6. So far it has worked great except for one issue. When using it to make DVD's, the file take up far more room than the actual file size is.
I've converted old VHS tapes to .mpg files and I planned on using Corel to create DVD's, with menus, for my family. I ran into the issue of the files being far too big, so after some research I discovered that .mpg files were not size efficient. I then used Corel to convert them to .mp4 files. So now, for example, a file that was 1.06GB (.mpg) is no 70.7MB (.mp4). So on disc the files are considerably smaller, with little to no video/audio loss. But, once I opened up Corel and started a new project and tried to use the new smaller files they still take up just about the same amount of space on the DVD's. On my HDD all of the converted files take up the same amount of disc space as just a few of the original files. Yet on the DVD I can still only fit 3-4 videos.
View 3 Replies
View Related
Aug 13, 2011
I just downloaded/installed Video Studio X4 Pro. Quite impressive. I've been using Roxio but too many problems so wanted to see if Corel is better. Have a minor problem that I haven't been able to solve. Background: I have 16 individual videos of foreign "soap operas" (all approx 3.7gb). All videos are either mpeg2 or avi. I copied all of them with no problem. Then, I wanted to eliminate some useless things at the beginning and end of each one. I went into a video editing program and trimmed approx 5 secs from the beginning and end of each video. After the trimming, I saved the videos to my hard drive in the My Videos folder in the Libraries. Then, because of some difficulties with Roxio, I decided to try Corel.
When I import a video, click on Tools, Create Disc, DVD, unmark Menu, then Burn, I always get the error telling me the total size is larger than the chosen project. This is what I don't understand. If the video, which is approx. 3.7gb,and I'm using a 4.7gb dvd, why am I getting this error? FYI: I went ahead and clicked on Yes, try to fit to disc, and after approximately 45 mins, it completed, ejected the disc and all I had was approx. 1/8" burn area. The properties of that disc showed it was a video.ts and when I clicked on it, the windows player opened and said can't be rendered. I don't under stand why X$ Pro says a 3.7gb video is over 7gb.
View 7 Replies
View Related
Oct 13, 2010
So like many new videographers is am shooting with the 5d markII which obviously shoots in HD.
However i cant seem to export my HD file out of VideoStudio.
When i drag the clip onto the timeline and right click on the clip and go to properties it says it is in 1920x1080. However when i go to create a video file ans click same as video settings it exports it to 720x480 at 29.97 frames per second. And the video was shot at 24fps.
So..
a) i don't understand why it is exporting it to totally different specs that what the project really is?
b) how to i export to an mpeg file that is 1920x1080 from VideoStudio.
View 2 Replies
View Related
Jan 15, 2011
I'm trying to use VideoStudio X2 to burn to DVD a file that I’ve downloaded to my laptop from my hard disk set top box . When I play the file in VideoStudio it's silent (whether or not I’ve added it to the timeline). However when I view the file (a .ts ) in Windows Media Player it has sound.
If I view other .ts video files in VideoStudio they do have sound, which suggests the sound for my laptop and VideoStudio aren't completely muted.I've attached a screen shot that shows the audio file properties as well as other settings.
Software: Pro X2 (VideoStudio v12.0.96.1)
Toshiba Satellite L500-1WG
Windows 7, Home Premium, 64 bit
Pentium Dual Core CPU, T4400, 2.2GHz, 4 GB RAM
Video type: PAL
View 9 Replies
View Related
Nov 18, 2013
I'm using Corel Videostudio Pro X5 and have been filmimg in ACVHD.MTS format this year for the first time on motorsport events, I've edited all my 2013 footage and all is looking great.and now i want to save the footage into a file on my PC to upload into Sony DVD Architect to make a quality DVD production.
I have done this routine with my SD footage for several years and had no issues at all and created some great DVDs but now i'm using HD footage i'm getting lost with all the video formats that are available.
Basically which is the best format to save my video file onto my PC before i upload it into Sony DVD Architect? I tried the first option HDV which looked great and a reasonable file size but then it started to flicker and freeze during play back on my PC.
Also, even though i've been filming in HD i still only want to make a standard DVD because i share my work with friends who do not have Bluray players, will this be an issue since i have filmed in HD all year? All i after after really is the best quality footage i can produce for my DVD.
View 14 Replies
View Related
Dec 9, 2010
Importing VHS tapes to VideoStudio Pro X2 produces a video file and a .upd file with the same number. As I intend to store these files on my external Seagate HDD would it be permissible to rename them to correspond to each VHS tape? At the moment I've just placed the two files in a folder and named it eg: VHSTape_1, VHSTape_2 etc. Are the .upd files really necessary?
View 3 Replies
View Related
Jan 11, 2011
A friend of mine shot some video with his JVC everio on 1/8/11.The native files PLAY fine in VS3 however any attempt to convert to any output video file or just output the audio track (which is what I really want to do) results in random audio "skips" like what happened when an LP had a scratch and a stylus couldn't play it.I have VS SP2 installed along with the audio patch on the Corel site.
I've successfully exported the MOD files to other formats using a freeware program called Video Pad from nchsoftware.com, so I can only assume VS has a problem.
I thought before I downloaded that MOD file converter, that's been discussed here, I would ask.Seems that a PAYware software like VS, shouldn't have this problem.Prior to using MOD files, I used AVI files in VS and exporting to an audio file worked just peachy.
View 14 Replies
View Related
Mar 27, 2011
I have added a video file to my timeline and then chosen share dvd. I then added chapters and chose a menu (tried several) and then selected Burn to folder and normalize audio but just NOTHING happens after 3% (which appears immediately) have tried different videos and menus - none get processed. The CPU runs at 100% BTW I am processing thi on my laptop Win 7 (32 bit) Toshiba with 3 GB RAM and a IGB GPU so do not go by my profile
I have a previous version of VS and that works just fine. yes I uninstalled theat entirely and then decided to try VS 14
View 1 Replies
View Related
