I would like to know how many MINUTES (approx) of video recorded in highest quality 1080/50p video on a 32Gb SDHC memory card.
I have found a web site which suggests that 5 hours 20 minutes can be recorded with the camera's in built memory (32Gb) yet only 2 hours 40 minutes on a 32Gb SDHC memory card. I cannot understand why the inbuilt memory can store more than twice as much as on an equivalent size SDHC card.
I have a DVD that was made from transferring a VHS PAL tape to a DVD. I can't see how to input the contents into VSProX4.
I downloaded Wondershare and that was easy to use to create an input file and I used VSProX4 to edit the file and make a 2 minute clip which I put on Youtube. The problem is with that the Watermark "Wondershare" is shown on the clip. I assume I need to spend $50 to buy a copy of Wondershare to not have the Watermark.
I tried a download of Handbrake. That created M4V files but it doesn't seem as though those files are compatible with VSProX4.
It would seem to me a basic requirement for a Video Editor to pull in a video from an existing DVD. I didn't think I would need to look for a program to RIP the DVD. What am I overlooking??
On the DVD there are 7 files. 2 *.BUP files, 2 *.IFO files and 3 *.VOB files. With either of the two programs I used above to RIP the DVD I think I saw 17 or 19 chapters.
What I am proposing to do is this: I have been asked to do the video for a friend's wedding. I would like to use a seperate audio recorder to record the audio of the wedding while I do the video on my camcorder. Then import the seperate audio track into VS X4 and sync it up with the video. The reason I am going to this extra trouble is that the built-in microphones on my camcorder are not that great unless I am "up close and personal" with the subject of the video. I have tried a short clip using an old MP3 player that records mono sound files and it appears to work well for the short video clip. What about with a longer clip, say up to an hour? If so, were there any problems keeping the video and audio tracks in sync?
View 2 Replies View RelatedI have a old version of Ulead video studio 10.0.0110.0 SE and would like to import recorded video from my camera but it breaks the files down into separate clips and would like to import them all at once. Is this possible or do i need to manually delete the ones I don't want and import the ones I do want. The connector is a AV cables to USB to PC.
View 7 Replies View RelatedI would like to convert my recorded mp4 videofiles with Corel Videostudio X3 to for example a DVD. The mp4 file is from a Sony DSC-H5 photocamera. It is HD quality not 1920 but i believe 1440 or something like that. What are the best settings to convert the mp4 to DVD without losing quality?
View 6 Replies View RelatedI am new to VSP X5. I want to edit a music video that I recorded live. The live recording of the music was fine but I need to cut and paste new video clips in certain part of the songs in the video timeline. I split the audio from the video.
I am having a hard time trying to sync the audio because every time I cut the video clip, the video keeps snapping back, making audio out of sync. Also, when adding transitions, video clips automatic shrink. I tried enable ripple, video still snap back. Is there a setting in the preference?
As the title says.. if I have a video, say for instance MPEG-4 1920x1080, rendered by Videostudio, and I multitrim it, then render it again using the 'Same Settings as First Clip' setting - is the video re-coded, or do I maintain original quality and the different parts are just effectively joined together?
View 2 Replies View RelatedI have recorded my bowling action (the English game of cricket, where you throw/bowl the ball the the batsmen). It was recorded side on to my run up. I wanted to measure my speed, so I thought, using 2 consecutive frames from movie maker, giving a time of 0.04 sec. Then using Pixlr(free photoshop), overlap the two frames, and measure the pixel distance the ball has traveled. Then I use the diameter of the ball (known) to measure how much distance each pixel is in real life. Then I calculate speed.
This should be accurate, with the only uncertainty coming from the pixel measurements. The results so far have me questioning if there are other factors I have missed, I got most of readings at 40mph, this is very slow, spinners bowl at this speed, I have been told I am faster, then I have one reading at 75mph. The fast one showed really good technique, so is why is that fast, but the slower ones shouldn't be that slow.
Can the new version of studio pro handle movie clips recorded at 24FPS?
View 14 Replies View RelatedI have been copying a number of pre-recorded video clips onto a DVD-R disc and playing them on my DVD recorder. As my Panasonic DMR-XW380 DVD recorder only plays DivX or XviD video files I have to convert the files I have to this format.
We have a Sony Bravia 40" TV and I was wondering about the best settings I should use for the Frame Resolution and bitrate etc. When I render anything to DivX with VS I use a Frame Resolution of 720 x 576 and a bitrate of 56kbps and this seems to play okay in my setup. Do you think these settings could be improved?
Today I have a lucky day by finding the reason why X4 saving project costs minutes each time I do. I bought special to be as fast as possible a Medion Pentium 5 SSD harddrive computer and installed the Videostudio software all on the SSD drive to get as much speed as possible for editing, rendering, etc....But last few month it did take minutes to save a project each time I did and could not find the reason why. I did change directories and locations on the harddrives and lots of other things to get it good to work, but now I have found the reason, it is the smartsound track what makes the problem. Without smartsound music everything works ok with saving projects in seconds.
Other Thing what makes problems is the 15 minutes limit for youtube in videostudio. I have more than 90 movies now at youtube, but have to upload them outside videostudio because their lengt of more than 15 minutes.Some movies are more than one houre and at youtube goes everything well without any problems.
i have video studio, and i am trying to transfer all my VCR to digital, i tried AVI at first but 46 min where 40GB!!! (i cant have this!) then i tried MPEG but after 5 min an error appears with no explication.
View 14 Replies View RelatedWill 32GB RAM have noticeable benefit compared to 16GB? Reason I'm asking is that I've just built a new PC: 3770K, 32GB RAM, SSD for OS and programs, SSD for scratch, Caviar Black for storage, etc but unfortunately Windows 7 Home Premium only allows 16GB RAM! I have Windows 8 Pro which I could install giving me access to full 32GB but only really want to do this if 32GB will offer tangible benefit to Photoshop.
Would love to hear from those that actually have upgraded from 16GB to 32GB.
I'm trying to set up Photoshop to create a bunch of thumbnail images. I've got actions to select various preset sizes with the marquee tool, and then one action that copies, creates a new document using the clipboard preset, pastes, and then resizes the image to 150 x 150 px.
The problem is that the resizing seems to have a mind of its own. Sometimes in the new image I get the selected area with a big blank space surrounding it, and sometimes most of it gets pasted outside the canvas so only a small part is visible.
My problem is that I made a new folder that I call "photo manipulation" and moved my "save" folder into it with the new droplet I created. So the action can not any longer save in its original path and my photos get stuck, not even manipulated in photoshop! All I wanted was to add the new folder in the "save" path between two forward slashes. The answer apparently is to double click on the action's relevant portion and enter the new value.
As indicated in this segment "Overwrite a single command" as copied and pasted below. "In the Actions panel, double-click the command. Enter the new values, and click OK." This does not work for me - when I double click on an action command I get a pop up from "Adobe Photoshop CS4 Extended" with the yellow exclamation mark and [The command "SAVE" is not currently available] Continue Stop and there is nothing more happening whatsoever.
As said b4 I would have been faster to re record
I have two documents open, both flat (1-layer). Let's call them A and B, with A in the foreground. While recording an action, I bring B to the foreground and see "Select previous document" in the action pane, then select the move tool, and hold down the shift key to drag B onto A and center it.
The action shows "Select next document", as it should. But the move isn't recorded. The history shows a drag took place, but it's not in the action. I've tried this by following the drag with other recordable commands, but the drag isn't recorded. Not using shift-drag doesn't make any difference, either.
Aren't move tool steps recordable in an action?
Running CS6 Extended 13.0.4 on a Mac Pro, OSX 10.8.2.
I lost a hard drive.....so I re-installed CS5 and updated it.....and now I would like to go back and retrieve my recorded actions from somewhere in the PS files on the old hard drive. I have access to the files.
View 1 Replies View RelatedI'm working with a file that has multiple layers that with almost exactly the same content.
The subject (car) just changes colors.
Let's say that there is a spot I want to clone out on each layer, (shown above as a black smudge) but when I do, the results are somewhat different every time. I'm looking for consistency.
Is there a way in CS6 to create a Tool Recorded Action to sample an area on a layer, clone out the ugly, then repeat the process on the layer below?
*The goal here is to sample an area initiated on Layer A (Yellow) and clone out an area on Layer A (Yellow)...
..then use the action to sample the exact same area, but this time sampled from Layer B (Orange) to clone out that same area on Layer B (Orange).
I want to get the same results on every layer so the look on every color is uniform.
I almost got it to work, but my problem occurs when I look at the details of the action.
If I could duplicate the steps and change the "Source: layer" to the layer name below, that might do it.
Also I used the shortcut CTRL + [ to "Select backward layer". When I look a the details on this it says "Without Make Visible." Is there a way to do this WITH MAKE VISIBLE?
I thought it would be in the same folder as custom media, but the GMS folder there is empty. I'd like to back them up. Where they are stored (in XP)?
View 8 Replies View RelatedHow to undo a step in a recorded macro.
Let's say that the macro has 17 steps, instead of hitting undo 17 times... I just have to do it once.
What's this line?
And also where can I find downloadable resources on macro creation and editing?
We do a lot of artwork for screenprinting that needs to generally be 11" tall for adult shirts and 9" tall for kids sizes.
I recorded a macro that basically copies everything on the 11" page onto a new page, pastes the graphic and then resizes it to 9" tall. The problem is that when it resizes, it doesn't seem to keep the proportions.
For example, if I have a circle that is 11"x11" and use my macro, I would expect it to be resized to 9"x9"
Instead, after using my macro, the circle is resized to 9" tall by 8.36" wide.
Did I make a mistake somewhere when recording this macro? I'm not a pro at deciphering macro scripts so I've attached it here:
Sub Kids_Size() ' Recorded 6/30/2011 ActivePage.Shapes.All.CreateSelection ActiveSelection.Copy Dim p1 As Page Set p1 = ActiveDocument.InsertPagesEx(1, False, ActivePage.Index, 11#, 17#) p1.Layers("Layer 1").Paste Dim Paste1 As ShapeRange Set Paste1 = ActiveSelectionRange ActiveDocument.ReferencePoint = cdrCenter Paste1.SetSize 8.360346, 8.999996End Sub
i'd love to see a tutorial on how to sync externally recorded sound to clips.
View 6 Replies View RelatedFor photoshop, there's URL... (scroll down to "ActionFileToJavascript") which can convert recorded photoshop actions into jsx. Is there any such resource for Illustrator?
View 8 Replies View Relatedi am trying to create an Action in CS3 but some of my actions are not been recorded.
What i want to do is run the Batch option on a folder with a 1,000 PDFs in it. The PDFs (which were created in Illustrator CS3) consist of a single page with a single embedded image at the foot of the page. I am trying to update that embedded image. The Actions i am trying to record are...
1) Select the single image in the Links palette.
2) Choose the "Relink.." option in the drop down menu of the Links palette.
3) Navigate to the new image and select "Place".
4) Save and close document.
But the first two actions are not been recorded.
From trying this manually the new image seems to take on the horizontal and vertical scaling of the previous image which is what i want. But if i am going to have to do a script then that is a factor that may have to be incorporated into the script.
I've just 'upgraded' to CC, and noticed that actions that alter Curves adjustment layers do not play back correctly.The Action itself contains the correct steps ... here's an example.. but it refuses to play this type of step in any Action, giving me the default, flat curve, thus ...I've an extensive set of Actions of this type for photo-processing: I take it that these are now pretty useless in PSD CC?
View 9 Replies View RelatedUnder the Develop Module is it possible to export the changes made to an image recorded under the History Tab?
View 1 Replies View RelatedI am currently using a windows 7 Toshiba laptop. I have downloaded the free trial of Photoshop but after around 5 mintues of use, it encounters a problem and has to close. Unfortunately, windows can not find the problem. I am therefore unable to do any work. I have tried restarting the laptop several times but it still keeps happening.
View 2 Replies View RelatedI just upgraded to CS6. I cant do anything in photoshop for more than a minute or so before it crashes. Both the 64 bit and 32 bit versions.I have reinstalled twice and applied all of the available updates. Tried running them as administrator with the same result.
I also updated my display drivers to the latest version and I do not have any fonts installed other than what comes with windows.This is a brand new computer Windows 7 64 bit
Problem signature:
Problem Event Name: APPCRASH
Application Name: Photoshop.exe
Application Version: 13.0.1.0
Application Timestamp: 5022da52
Fault Module Name: atioglxx.dll
Fault Module Version: 6.14.10.11762
Fault Module Timestamp: 5008c66c
[code]...
since I´ve installed Photoshop CS6 from the cloud with all the latest updates, the program crashes all day long, its really frustrating... I´ve never had similar issues with CS5 before. I´m running out of memory when opening a file (no matter how big!) and the program freezes, doesn´t respond any more.
View 15 Replies View Relatedall of a sudden from today every 5 minutes ps crashes.
it crashes when ever i maximize a window.
I thought Adobe fixed the complaince issues with Vista already? It freezes up and crashes constantly,
View 3 Replies View Related