Using X5 I was importing a .MTS file, something I have done successfully many times before. This time X5 produced a .DMP file with the message to copy the file to Corel for assistance.
How do I contact Corel and copy the file to them? The error message was:
c:userspaulappdatalocal empvstudio_15.1.0.34_20120604_153459.dmp
I'm trying to import a AVI file (its not DV) into VS but it comes up with the error message "xxx file is inaccessible" followed by the message "This file cannot be added to the project due to unknown file format or not enough memory or copyright".
I tried to play it in Windows Media Player but it came up with an error message about missing the required Codec. I installed the required codec (using MediaInfo advice) and Windows Media player can now play the file but VS still can't import it. The video stream of the AVI file is MPEG-4 (DivX 5). I would have thought that once I installed the correct codec for the Windows Media Player that VS should work with that file format?
I previously used VideoStudio 10 to capture and then edit my DV Camcorder files, this was on Windows XP and I never had any trouble with this. I have just captured my final DV tape with this camcorder (I'm about to get a new camcorder) on this old PC, however I have now got a new Windows 7 PC, and am now trying VideoStudio Pro X4. I have moved this captured AVI file to the new PC but as soon as I try to import it into VideoStudio I get the following:
File format mismatch
1081:1:3
I have used some other software to convert the AVI file into a DVD compatible MPEG2 file, so I guess I could do my editing on this instead if all else fails?
I have tried to add JPG images off my laptop to Video studio and every time I attempt to import an image into it, it comes up with a message the runs along the lines of ''unable to open file, file format mismatch, [16803:1:3]''. I took the pictures with my Canon G9, but I also took video with my G9 and strangely enough the video will import and play. I do really like the Corel software and I am disappointed that this problem has occurred.
View 12 Replies View RelatedCan icons (.ico) be produced with Photoshop?
View 6 Replies View RelatedI use PSE 12. I shoot RAW photos and use the Organizer to upload the photos from my camera to the computer. The organizer produces a jpg file with me doing anything. How do I turn off this unwanted freature?
View 1 Replies View RelatedWhen I use the marquee tool to draw a shape - circle/square etc I sometimes don't get the size exactly to my requirements. is there a way to fine tune the produced size? I'm assuming that there is some combination of keys that will allow me to make fine adjustments up or down to the size of the shape. How to do this without closing down and starting again and again until I get what I require?
View 2 Replies View RelatedI produce one outlined and filled alphabet letter per A4 page to create a sign for a shop window, changing the colours every three months. How do I determine the infill colour of a previously-produced letter?
View 2 Replies View RelatedI need to change the layer that my "Produced by an Autodesk Educational Product" border is being put to. I've never had to assign it to my text layer in the past; it has always just gone there. Now it is showing up on my furniture layer and I don't know where that setting is to move it.
View 9 Replies View RelatedI try to filter an Excel List and therby fill certain Multivalue Parameters with the filtered data.
The filter works fine an provides me a string looking like the sytax for the MULTIVALUE.SETLIST command.
B6string = FilterReturn & Chr(130) & B6String = 75‚80‚250‚65‚45‚250
Unfortunatly this string gets exactly as ONE entry in the Parameters Value listing !
MultiValue.SetList("B6_Lochbild_Länge", B6String)
I also tried
MultiValue.List("B6_Lochbild_Länge") = New Integer () {B6String}
and also
B6string = Chr(148) & FilterReturn & Chr(148) & Chr(130) & B6String
with the same effect !
I've been trying to model cut produced by a ball end mill taking an arbitrary 3D path. I know how to do this for 2D paths (and this has been discussed a couple of times on this forum), but I have had little to no success extending this to paths in 3D. I've attached an Inventor file that demonstrates what I want to do, it has an sketch that describes the tip of the end mill and the path that I want the center of the tip to trace out.
This seems like something that should be possible using sweep feature, but if it is then I have not found a way to get this to work. The issue is that I have not been able to effectively control the angle of the sweep plane with respect to the path. In reality, the normal of the plane should be equal to the tangent of the path with the z-component zeroed out.
However, if I sweep using the path and the "Path orientation" then it does not zero out the z-component, if I sweep using the path and the "Parallel orientation" it does not take the x&y tangent components, if I sweep using a guide rail or guide surfaces it also does not zero out the z-component.
In fact, the only way I could come up with to accomplish this would be to sweep the path in 2D and then to use a series of bend part features in order to put things into 3D. So far as I can tell this works, but back calculating the 2D curve is so backwards and laborious that I can't imagine using this for anything. In Solidworks this is relatively easy using the sweep solid feature .
shot video at 120 fps HD MP4 NTSC/HD (720 not 1080), with an Lumix FZ200 camera. Saves to hard-drive with Panasonic software. Plays proper in VLC. Video Studio closes down when attempting to import it to the library,when in the edit mode. I can import jpegs or regular videos no problem. Using VSx4. This should be like using video shot with a GoPro Hero3.
View 5 Replies View RelatedSo, I'm trying to create a repeat pattern of a Balloon illustration I've done in Adobe Illustrator. I've got the singular file (balloon.ai), which weighs in at around 700MB.
Now I'm trying to create the repeat of this pattern on a separate Artboard which will repeat these balloons, 30 balloons per repeat square to be precise.
What would be the best way to import these separate balloons into the repeat square once (as they're the same file) without affecting the weight of the file and performance of Illustrator?
So, in essence, is there a way to import that balloon.ai file and only have it use up 700MB on the page rather than 30x700MB by the time I've placed 30 balloons?
I can't rasterize the files as the printer needs the raw file.
I recently purchased Video Studio Express 2010 and cannot import avi files that were created using a Flip. I have tried importing them from both my hard drive and a flash drive. VSE does not recognize the avi files on either drive. I have been able to import mpg files without any problems.
View 6 Replies View Relatedjust purchased PaintShop Pro X3 and VideoStudio X4. I have a Panasonic camcorder which writes to mini DV tapes and has Firewire output. I previously did my editing using iMovie on an ageing Macbook. My new Windows 7 laptop doesn't have a firewire port therefore I was hopeful of capturing the raw footage on the Mac and then importing it into VideoStudio on the Windows laptop. When I try and import the .dv files created by iMovie I get the error 'File format mismatch'.
The videos play fine on the Windows laptop so I don't understand why VideoStudio can't read them.
I was thinking I could perhaps use something to convert the videos to a format readable by VideoStudio.
I am new to using Video Studio Pro. I would like to animate my Paint Shop Pro png files or gif files with Video Studio. I figured out how to make the video work and figured out how to change the speed on individual frames. My problem is saving the project. I can only save it as a VSP file and it is too big to upload to Photo bucket. The whole animation is 15KB.
Can you change the save as file extension to include animated gifs?
I'm having with x3 when I import MOV files from an IPhone 4s onto an HP pavillion dv7 4270us laptop with 4 gb, 1.80ghz.
The playback is very choppy and almost paralyzed, while the audio does fine.Also, x3 constantly shuts down with a brief error message telling me to contact corel support.
Should I be converting these video clips before I import them into my capture folder on corel?
I'm trying to preserve quality since the iphone4s takes a pretty nice video, definitely rivals my canon dv and most HD flip cams I've seen.
I watched the Corel X5 Pro demo of someone importing a DVD on video, but when I insert either +R/W or vanilla DVD disc with home generated content from a few years ago VideoStudio Pro X5 doesn't import. The Capture - Import from Digital Media finds the files on the DVD and even displays them and can preview, but I never get the "import" button going live.
View 2 Replies View RelatedI've discovered I have some video effects, like "Film Express" (which happens to be a NewBlue effect) in VSX2 that I don't have in VSX4. I'd like to use it but don't know how to import it and don't know where to find it, either. how I might move it over?
View 5 Replies View RelatedI have a Sony Handycam DVD403 that works great even though it is old. Was trying to import the mini DVD into X3. In the picture below you can see that X3 recognizes it, but the import button is grayed out.
Not sure the best way to go about this. I did not want to reinstall the Sony Picture Package software that never worked real well in the first place, but that is how I was able to import it into VS11. I was kinda hoping X3 would just import it and I would not have to use Picture Package. How to import my mini DVD's? The folders are:
DCIM
Video_RM
Video_TS
importing DVD's in VS-ProX5. I currently have both versions 12 and 15 (Pro X5) installed on my computer. In version 12, if I import or capture a DVD through the VIDEO_TS folders it will give me many options for what I want to do with the DVD Folder. It will let me see my audio options, let me choose to include or exclude subtitles and even change to a different angle, which I have never used. So a home video that I am trying to import in ProX5 does not even give me the choice! It just inserts the subtitles for me! The problem is that this time I didn't want the subtitles since my movie is in English and the subtitles are for my non-English speaking family members..Where on the new VS is the option for choosing subtitles? I can't believe it's not there and that Vs12 is more advanced than VS15..
View 1 Replies View RelatedI am having problem convertin this SLDPRT file to inventor.
I am currently using 2012. I tried importing the file but nothing shows up when I import it. All I get is this translation report with error.
translate this SLDPRT file to .ipt file?
I finally have my project done. I click Share, then try to change the bitrate lower it says I am 2.5gigs over. When I change it nothing happens on the left side, it still stays the same. Also it does not import my chapters that I have set in the editing mode?
I have saved it to a video file, in case it may be easier to do it that way? I have a difficult time finding it in the their programs library. X12 use to automatically import your chapters from the editing mode when they were set.
Either I am confused (which can be easy) or it is more difficult to figure things out in X3.
Is there any way to import the extra angles from a DVD? There is only one box to check for each chapter but the additional angles are listed in the box above the preview window. I thought maybe clicking on them would do something but it didn't. I also tried "Select All" but only the first angle was copied.
View 7 Replies View RelatedWill I have problems editing video if some of the video is shot at 30 fps and action shots are recorded at 60fps? Do I need to import the video shot at 60 fps in a separate folder and or keep them separate from the 30 fps segments for editing purposes? How do you get the final project properties to match the inputed video if they are different? I am planning on shooting most of the video at 30 fps but would like the action shots at a higher frame rate for slow motion etc. How is this accomplished, or is it no big deal? I want to know before I shoot all the video so I don't have a problem later.
View 3 Replies View RelatedI am using Corel VideoStudio ProX4 to build a small movie and am having a problem with AVI files. When I go to Step 2 Edit, and click on the folder icon to "Import Media Files" I can see a set of mp4 and avi files I would like to use in my project.
The mp4 files open fine and play just fine. The avi files were opening fine last night, but would play in a jerky manner when an audio track was laid over them. I blew away that project and today tried to go to Step 2 Edit, Import Media files, and tried to import the avi files again now I get this message:
File format mismatch
1081:1:3
It will no longer let me import, play, edit the avi files. These files play fine in Windows Media Player so I'm not sure what is going on. I just installed Service Pack 2 yesterday, and I'm thinking this may be causing the problem.
I am in the middle of doing a video for my father in laws 70th , And have hit a problem every time i import or add a video to vs x2 it shuts down , its fine with photos , Soon as i add video it shuts down i thought maybe it was a codec problem and installed k-lite full pack but still no change.
View 4 Replies View RelatedI have multiple .VOB and other files in a "VIDEO_TS" folder that I can't import using either the "File/Insert Media to Timeline" or the "Capture/Insert Digital Media" function of this VS Pro X2 software version. In both attempted instances I am presented with a error message that reads: 'Not a valid DVD Volume. Report ID: 0x8000408fe(2302)".
As background, these .VOB originated from my own personal DVD's recording that failed to "finalize" due to an electrical disconnect with that Liton recorder, or software failure. Using the Isobuster software, and the page 3 instructions for it found on the excellent website of [URL] ..., I created the file that I'm attempting to import into VS. I don't believe this remedial step of using Isobuster is the cause of my VS problem, as the .VOB files it created are functional as proven by their playing in VLC media player software. Thus, I don't want to be chasing ghosts along that path, unless you can be certain that is where I should be going.
I have just moved to VSP5 from 4 and am having difficulty importing .cr2 files in Capture. Same photo files go satisfactorily into v.4 but are apparently ignored by the new version. Am I missing a setup or preferences step?
To make this point more specifically: I have created test folders containing mixed .mov, .jpg and .cr2 files - only the .mov are recognised. I have also created a test folder containing only .jpg and .cr2 files. On Capture, VSP5 reports "There is no valid content".
I'm looking to import an existing project into another, I want to do this because then I can move the files around and edit them individually rather than creating an .avi and importing that video onto the timeline. Is there such a command?
View 2 Replies View RelatedI'm running VS Pro x4 and I'm trying to import a video that I got from a homemade DVD which was created from a VHS tape. When I import the file to VS, the video is fine, but it thinks there's no audio with it. If I play the file in iTunes, then it has audio.
The video file's specs are as follows:Kind: MPEG-4 video fileSize: 324 MBChannels: Stereo, Dolby Digital 5.1Encoded with: HandBrake 0.9.6Video Dimensions: 634x480Video Codec: H.264What am I doing wrong?