Just skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
I can't seem to get my audio on my home videos to transfer with the video.
View 8 Replies View RelatedI have a video clip (.MOV) which I have added to my project.
When I preview the clip itself the sound is perfect. However when I preview he actual project, the sound is distorted.?
I have been working with Corel VideoStudio X2, X3 and X4 from a long time now. At this moment I have to questions:
- where to find more templates (eg direct projects) other than the free downloads and the ones on the new Corel share site
- how to move the templates from X3 to X4?
I am working with a project with Corel VideoStudio pro x2 that involves on-screen graphics on the videos. I use a transparent .png file that I put in the Overlay Track #1.
Original file:
Whenever I edit the video or the image, I get distortion around Music Television area. Somehow it looks like the writing Music Television wants to move / increase in size. When I play the project in the preview window, it looks okay.
After saving to a DVD file like MPEG2 file 720/560 it looks like this:
I used the same project on my laptop which has a better graphic card, Corel VideoStudio pro x4 and I get the same results. The image is so pixelated and curvy. I used a different video editing software though, the image looks much smoother:
I have always rendered my projects to DVD (mpeg) video files and then used those to 'create disk' (ie create movie).
I also thought that to prevent 'create' disk' from rendering again that all the attributes (constant or variable, kbs, audio compression) used during rendering must be the same as when creating disk.
Is there any benefit from creating a movie (for burning) using either method? Is it faster overall 'creating disk' using project files than rendering first? The reason I ask is that today it seemed to take 'forever' to 'create disk' using pre-rendered files.
I realise that you always see the warning that 'this action will take some time to render' but I thought that if all the attributes were the same that no rendering was done.
I am trying out a few video editors, having never worked with one before. I shot a video with my camera and have imported the MP4 file into VSPro x4. But I would like to disable the audio track --to silence everything my camera's microphone picked up when I was shooting the video and save the result as a "silent film" also in MP4 format. I don't even need to do any splicing or cutting at this point. But I cannot figure how to kill the sound. In one of the products I'm looking at, there's a Disable Audio option on its Output menu. I cannot find a counterpart option with Corel Video Studio Pro x4. Does it have this capability?
View 1 Replies View RelatedI have a small ~180 MB wmv file and I am just trying to trim 10 seconds out of it. This file plays fine in Windows Media Player. When I bring the file into a trial version of VideoStudio X6 pro (evaluating whether to purchase) there are sections of silence appearing consistently in the area that I need. I can see the silence in the 'audio track'. This silence does not exist when playing the video in Media Player.
I also noticed (possibly related) that the video will simply stop playing at points. If I move the scrubber a few seconds after the 'stop point' and hit play it will play again for a bit and then stop suddenly again.
If you can mirror or flip a video clip without effecting the sound, using VideoStudio Pro 4?
View 3 Replies View RelatedI have this .avi file that I imported from a mini-DV tape through 1394 cable onto my computer. I opened this video file in the program, and I want to extract the audio file from it, but the "create sound file" command is unclickable. What should I do to get the audio extracted from my avi video file?
View 2 Replies View RelatedI have Windows 7 and every time I put a song in the project and play it, no sound comes along. It just stays still and after a few seconds goes to the end of the sound file.
Also, whenever I edit a video that has sound, when I play the project, the sound comes all wrong in the part of the edited video. If I did nothing in other videos of the same project, the sound comes good from them. It happens with x2 and with x3.
Using X5 to create a video file from a project file in the timeline.
After the file completes rendering, the project preferences default is set to play the rendered file. But I find that when the playing commences after rendering, the sound has an echo effect that isn't part of the original files. Like the original sound is reflecting off walls, and you get the same sound just spaced apart by a small time period. I've tracked this to what appears to be X5 playing both the rendered file and the project file at the same time. If I turn the project preferences item "play after render" off, off course nothing happens after rendering completes. And separately playing the rendered file, the sound is normal.
Is there a way to stop this echo effect? Ideally, just play the rendered file only. But failing that, change the preferences default. However, there does not seem to be any way to change the project preferences default for this item.
I have a project which is a party with background burble. I cut to a mute cutaway shot of the mountains outside the window, then back into the party. I want the background burble to run right through. How can I strip some sound off a combined video clip and lay it under the mute outdoor shot?Used to do this quite easily in 16mm.
View 11 Replies View RelatedUsing VideoStudio X4 Ultimate 14.2.0.23 I have the following issue:
When doing a crossfade between video clips, the audio crossfades just fine in the preview of the edit screen in X4. However, after exporting to DVD 14:9 format, in the resulting MPG video the audio of the first clip correctly fades out, while the audio of the second clip doesn't fade in... it just jumps in.
I downloaded the trial version of VideoStudio 4 Pro to try it out and I like the interface and the ease of use. My problem is that when I capture MPEG 4 files in the timeline and go to replay them, the sound and video are very choppy and the replay skips the whole way through.
I converted the MPEG 4 files to wmv, and the video was smooth but I lost some of the image clarity in the converting process. I don't think it's my computer because the MPEG 4 files play nicely on MediaPlayer - just not on VideoStudio.
When the video file is saved and burn on DVD disc and play on a DVD player, only the images appear on the TV screen but there is no sound coming out from the speakers. I'm using Studio Pro X4
View 7 Replies View RelatedI'm VERY new at Corel Videostudio Pro X3.How do I move the video track in the timeline? I can't make it work unless the clip is in the overlay track.
View 7 Replies View RelatedWhen I try to create a WMV HD 1280x720 file, VSX2 tries to use this:
Windows Media Video
24 bits, 208 x 160, 20 fps
Frame-based
22.050 KHz, 16 bits, Stereo
Windows Media Video 8 for Color Pocket PCs (225 Kbps)
When I try to create a CUSTOM profile, only WMV 8 profiles are shown. No WMV 9 or Ulead profiles.
Checking my C:, WMV 9 profiles are all present here: C:Program Files (x86)Windows Media ComponentsEncoderProfile
I've installed the latest versions of WMV 9. Still no luck.
VideoStudio Pro X2
Windows 7
AMD Phenom II X6 2.6 Ghz
6 Gig Ram
I bought a SABRENT USB-AVCPT video capture device that came bundled with ULEAD Video Studio 10 SE, and after loading the Windows 7 install kit, loaded it and have been pulling my hair out ever since.
Computer: Sony VIAO 64 bit, 3.4ghz dual core, 4GB main memory.
(1) Audio Input keeps constantly switching back to Microphone, even though the video stays on the USB Capture device. If I do ANYTHING, like stop a capture to double-check the captured file by playing it back, the display will still show the USB Audio but the capture is coming from the microphone. (It's rather frustrating to have 93 minutes of very fine video but 93 minutes of the gardener and the lawnmower, breakfast conversation, etc.)
(2) Attempts to change the Video Capture to 720x480, rather than the default 640x480, will quite often result in crashes, or in "Illegal function" error messages that cause AppCrash, or, if the app doesn't crash, it switches the sound back to Microphone and drops the video back to default.
(3) I cannot get it to let me capture any COMPRESSED video formats. So a 90 minute video ends up in a 105GB AVI file. (Previous discussion in here, with Ken Barry, if my memory (not on the video card!) is working right, indicated that this humongous file size might be the problem. But if I can't get it to capture something and compress it...) None of the other capture formats seem to work without Illegal Function, Illegal Function, and an AppCrash.
I'm running Ulead Video Studio 11, and I have AVI files I have downloaded from the internet. When I try to import them into Ulead I get the following message - ''(FILENAME) is not accessible'' followed by ''These files cannot be added to this project. These files may be of unknown file format, the computer does not have enough memory or the file is copyright protected''
If I right click the files, this is the info I get -
Image
624x352 Pixels
Audio
142kbps
MPEG Layer 3
Video
23 Frames Per Second
1117kbps
Am I missing some form of codec for this particular AVI ?
When I puschase the Diamond video capture device, it came with Ulead VideoStudio 10 SE. This program would not work in Windows 7
I tried to uninstall it, but I guess I did not do it correctly. A file is still running. It has to do with Windows color sheme.
After starting computer up, a window appears saying something like Windows color sheme has been changed to 7 basic. Because (and I can't recall all the words, but it has to do with a Ulead file still running)
I would like to completely remove any Ulead files still occupying space in the computer. If I knew where the file might recide I could go into the registry and delete it.
when trying to download movie from Sony camcorder everything appears fine until Video Studio program stops camcorder on its own and displays unknown error. This sometimes happens after 30, 40 even 50 minutes, but I have yet to be able to download entire 60 minute tape to computer. I am trying to convert Digital 8 movies to DVD.
View 4 Replies View RelatedCan not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
Running Ulead Video studio 10 Plus and have used it well for the last few years, on Windows Vista Home ed. Have put the audio on to the project as i always have and ever had any problems wih it. Now though it will only play the sound when the audio clip is selected and not when project is selected, although the coloured lines move on the mixer in both sourround sound and non-surround sound when project is selected.
View 3 Replies View RelatedI have been using different versions of Ulead for over 20 years! In the past I was able to save an image in JPEG format on my desktop after saving the clip as an image in the library. Now when I save it to the desktop it only saves it as a "uvs file" which is not recognized by photo editing software
[URL]........
MY version of Ulead VideoStudio 11.5 crashed and upon rebooting I noticed that the Attributes tool has completely disappeared. I had this problem once before and I found a post online that cured the problem, unchecking a box somewhere resolved it....but I cant find or remember what to do..
View 6 Replies View RelatedAccording to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 Replies View RelatedI copied the files over. I opened Ulead and tried to open the project I was working on. So it wanted me to Relink, which I did. But I got the error message: File format mismatch [16803:1:2] I checked the Smart Proxy.So I copied the files back to the old computer. I can open up the project with no problems.
View 7 Replies View RelatedI am having trouble with Adobe Premiere Pro CC regarding which video formats it will accept in my video editing.
I have tried uploading basic .avi, .mp4, and .mov files, but they all say "unsupported format or damaged file" and I know that the files are definitely not damaged.
I can convert all video files to whatever mainly-used format but it would take a while to find the right ones.
I've been transferring a lot of old vidoes from analog tape to digital video. All video files have been created as H.264 640x480 mp4 with Elgato Video Capture. And all video-files display fine in, VLC, Media Player Classic, Quicktime and even iMovie. Some of these import fine into Premiere CS5.5 without problem, but some end up looking green, distorted and doubled, like this:
I've tried to Interpret Footage on the broken clips, setting the framerate to a constant like 25fps. But this seems to have no effect.When I try to import the same file into After Effects CS5.5, I get this error: after effects error: overflow converting ratio denominators 17::18..I've crosschecked two video files against each other to find some differences, but there is none, as far as I can see.
I have installed a trial version of Photoshop CS6 and am editing video. When I open short videos to edit the sound on the original video plays fine but when I open a larger video (1 hr) the sound does not play. I have played with the mute button to no avail. Sound is fine on the original file. Is this a limitation of the trial version or a bug or some mistake I am making?
View 4 Replies View Related