VideoStudio :: Move Direct Projects From X3 To X4

May 22, 2011

I have been working with Corel VideoStudio X2, X3 and X4 from a long time now. At this moment I have to questions:

- where to find more templates (eg direct projects) other than the free downloads and the ones on the new Corel share site
- how to move the templates from X3 to X4?

View 1 Replies


ADVERTISEMENT

VideoStudio :: Move Projects From Ulead / Video And Sound Distorted

Oct 29, 2010

Just skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?

Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.

View 11 Replies View Related

VideoStudio :: How To Combine Two Projects

Apr 1, 2011

I have created two projects, it now seems sensible due to subject to add these two edited projects together to form one project and burn to DVD.

View 4 Replies View Related

VideoStudio :: X5 Pro - All New Projects Splitting

Sep 29, 2012

I wanted to split a clip, but I've split a project (after 4 minutes). Now, when I want to insert an audio file, it stops playing after 4 minutes although it's much longer. Every new project is also split and I cannot insert music. It stops playing after 4 minutes. I have found the explanations about splitting the clip, but nothing about the splitting the whole project. How can I make my new projects "entire" and insert the full-lenght audio?

View 9 Replies View Related

VideoStudio :: X4 - Combine Two Projects?

Oct 4, 2011

How can I combine two projects in Video-Studio X4?

View 2 Replies View Related

VideoStudio :: Joining Several Projects Together?

Jan 28, 2012

Is there a way of assembling several projects on the same time line in order to create a compilation video then re editing them to create a new project. The only way I can fiqure is to make a video file of each project and then edit together. not a very flexable way of working.

View 1 Replies View Related

VideoStudio :: Keeping The Last Used Projects?

Feb 27, 2013

I've observed that VS X5 usually keeps at least 4 levels of last-used project files - some of the time. But I notice that from one day to the next, that last used list can disappear, irregularly.

In another piece of software (unrelated) I use, a scan history log gets kept in a temp file, which lasts only until the next time a cleaner like Cclean goes looking for all those .tmp files and similar, to clean up all the leftovers on a machine that clutter up its HDD space and slag its performance.

Does VS X5 do something similar for the last used project files?

If vendors have to ape MS in this sort of user friendly facility, they can at least put the data in a space that's unique to the application. I've never noticed that MS was guilty of losing the last files used details - pity the copiers cannot do the same.

View 5 Replies View Related

VideoStudio :: How To Combine Projects Of Corel X2

Jun 12, 2011

For example, I have project A and project B, they represent two videos. I want to combine the two projects and export into one video.

I have tried exporting two videos from the two projects independently, and import the two videos into a new blank project and export again, but the quality is not very good.

View 1 Replies View Related

VideoStudio :: Merging Projects (Three Interviews) X5

Nov 28, 2012

Situation: I have three interviews, edited in each their project file in X5. Now I need to combine them in one project, from where I will add news stuff and edit existing stuff.

How do I merge the files into one project file which is still fully editable - for every element in the whole timeline?

Sure I can create a new project file and import the .VPS-files, but the three interviews will then show us as non-editable blocks.

View 13 Replies View Related

VideoStudio :: Merging Or Combining Projects

Nov 15, 2006

I am using VideoStudio 10, and want to combine four separate 12-minute projects into one 48-minute program without losing a generation. Possible?

View 14 Replies View Related

VideoStudio :: Combine 2 Or More Projects Together On Timeline?

Jun 18, 2012

Is there a way to combine 2 or more projects together on a timeline, such a way that you can see/adjust all clips, overlays etc from each of them?

View 2 Replies View Related

VideoStudio :: X3 - Burn Two Projects To 1 Disc?

Mar 16, 2011

I have created two projects within Video Studio X3, which I want to put on one disc as separate programs, so they can be viewed individually (they are the same subject but covering different time spans) how do I achieve this ?

View 2 Replies View Related

VideoStudio :: Where To Find The Saved Projects

May 27, 2011

I remember back in VS11 I had to ask the same question, but don't remember the answer. When you are on the final step and burn a VS disk it 'saves' it. Where do you find them so you don't have to go through the whole process again to setup a disk to burn?

View 2 Replies View Related

VideoStudio :: Transfer Projects To New Computer?

Nov 30, 2010

I am currently on a trial but will be purchasing a full version soon. I am getting a new computer and need to transfer over all my projects and related information to my new PC. How do I do this with the existing videos I have created?

View 5 Replies View Related

VideoStudio :: X2 Stuttered Movement In Imported Projects?

Oct 27, 2010

When importing a HD project (not rendered footage) into another HD project in VSX2, the movement of objects in the rendered AVCHD is 'stuttered' - why ?This is NOT a transition or title stutter as per one of my previous posts - which was resolved by downloading the trial version of VSX3.

In VSX2 I have cut down my AVCHD source film into smaller, more manageable chapters - each a separate VSX2 project.When assembling these chapters, I chose the "import project" (ex chapter 2 into chapter 1) as I used to do with UMSP7.0 Once BD-RE is cooked, the first chapter looks fine but the subsequent chapters have very noticeable problems with movement - especially vehicles moving accross the screen - it looks like the frame rate has gone right down to 10fps (iso 25 for PAL).

Oddly enough (I would have thought it should be the opposite), if I render each chapter to AVCHD and then import the rendered chapters, image movement is much smoother (virtually same as original).The project properties are all the same in each project (PAL AVCHD 1920X1080 25fps); I have tried activating the 2-pass render and have tried switching on and off the anti-flicker but no improvement.

The "import project" feature that I used in UMSP7 is great because it allows you to create the chapters independently but then put some uninterrupted music over the links between chapters in the final project to ensure continuity if desired.

Win Vista, Pentium Core Duo 2.26GHz, 4Gb DDR2 300Gb HDD + 2 x 250Gb USB-connected HDDs, BD-burner, Sony HDR-CX550

View 4 Replies View Related

VideoStudio :: Library Thumbnails For Projects Have Disappeared?

Mar 27, 2013

I'm going back to a project that has been dormant for almost a year. My project files are fine, but when I load them there are no thumbnails any more, just the default thumbnail library.

Are there library files associated with my project files I can search for and what kind of file is that?

View 7 Replies View Related

VideoStudio :: Editing Projects Become Glitchy On Playback?

Aug 11, 2013

im trying to edit video (local car racing) that I have recorded from my GOPRO's (hero 3 Black) @ 1080p 60fps,when I go picture in picture. now when I try to line them up so they are sync'd when I play back project the video becomes glitchy like its skipping frames.

I have had enabled 50/60p editing ive gone into project properties and tried both ntsc and pal in 60fps and @ 1920x1080p frame size. I noticed I couldn't change mpeg (pal). it was at 25fps.. and gopro records in Mpeg..

what can I do to retain the 60fps quality..

View 2 Replies View Related

VideoStudio :: Copying / Pasting Clips Between Projects

Jan 19, 2011

I'm developing a project that is made up of clips taken from several other projects. Right now I go to one of the source projects view and find the clips I want, write them down and their location and so forth through all the source projects. Then I go and try to build my new project using this info. As the project grows this starts to get confusing. If two projects could be opened at once it would work but that can't be done.

View 7 Replies View Related

VideoStudio :: Combining Two Or More Projects / Edit Functions

Jun 4, 2013

We have been asked many times if it is possible to combine two projects and still retain the editing functions, That both projects open in the same timeline showing all clips and the edits that have been applied, allowing for further editing of the full project.

We have always assumed this is not possible and suggest rendering the project to a video file, to be added to the second project. Otherwise use Nesting, adding the VSP to the timeline, something I do not recommend anyway.

Video Studio uses Instant Projects and these do open in an existing project and display individual clips.So why cant we create our own Instant Project” of a project and simply add that to another project. Well we can.I have just tried and was successful, there was a but of a delay in reading the clips with Video Studio doing a Not Responding act, It was quite a long project, a bit of patience and things loaded ok.

Using File – Export as Template an Instant Project Template will be created having the default location within the Custom library.Once created can be added to any project.

View 1 Replies View Related

VideoStudio :: Reinstall X4 And Not Loose Projects / Libraries?

Apr 12, 2011

I installed the download/trial version of X4. I decided to purchase but went through an education/academic seller since I work at a university and get better prices.

I thought I could just input the serial # of the disk I bought but obviously there is a difference in the 2-versions since it won't accept the "educational version" serial #.

So, I figure I need to uninstall the download/trial version and install the what I got on DVD.

I am concerned about loosing the info in the libraries. I made a spare copy of the projects, just in case the uninstall does something with them.

View 5 Replies View Related

VideoStudio :: Instant Projects Templates - Can't Find Them?

Mar 28, 2013

I had videostudio 4x which was upgraded from 2x on a laptop computer. I recently got a new desktop and loaded the X4 on that. The laptop has many files listed to choose from when I go to the instant projects. They are listed under the drop-down menus "beginning", "middle", "end", "complete", etc. There are probably 20-40 choices for each drop-down choice.

On my new install, there is only 1 choice on each. I did not purchase any add on templates. How do I get the others back? Is there a way to transfer them from the laptop?I tried loading some templates from the help button/do more tab and downloaded and installed the templates there, but got only some very simple templates that went under the "custom" drop-down menu.

Was there some free template pack that I downloaded or got on the original X2 disk, or X4 downloaded program that I did not install to the new computer or that I downloaded after installing the X4?

View 5 Replies View Related

VideoStudio :: Instant Projects - Edit Or Remove Text?

Nov 21, 2013

Some of the Instant Projects in VideoStudio 6 might be useful if one could remove the "VideoSudio" text from them and maybe even add new text. Is there a way to do that? If not, what are they for?

View 5 Replies View Related

VideoStudio :: Combining Projects Into Single Project Before Editing?

May 5, 2013

I have several discrete projects which I have created in VideoStudio over time and would now like to combine some into a single project before editing.

View 4 Replies View Related

VideoStudio :: Create Movie From Projects Or Rendered Video?

May 29, 2011

I have always rendered my projects to DVD (mpeg) video files and then used those to 'create disk' (ie create movie).

I also thought that to prevent 'create' disk' from rendering again that all the attributes (constant or variable, kbs, audio compression) used during rendering must be the same as when creating disk.

Is there any benefit from creating a movie (for burning) using either method? Is it faster overall 'creating disk' using project files than rendering first? The reason I ask is that today it seemed to take 'forever' to 'create disk' using pre-rendered files.

I realise that you always see the warning that 'this action will take some time to render' but I thought that if all the attributes were the same that no rendering was done.

View 14 Replies View Related

VideoStudio :: Constant Crashing When Viewing Edited Projects?

Dec 2, 2010

I recently installed VideoStudio Pro X3. Whenever I play back anything I tried edit the program crashes and a dump file error shows. I have tried using the smart proxy without success. I am trying to edit HD files *.mov. The files are only a couple of minutes so that should not be an issue. I also tried closing all other programs. When I try and playback I can only see a couple of seconds before it crashes. I am wondering if my computer does not have the resources to edit HD. I have 1024 MB of Ram.

View 4 Replies View Related

VideoStudio :: Batch For Rendering Single Videos From Several VSP Projects

Sep 10, 2013

From several .vsp-projects to output/convert/encode/render single video files (Videodatei erstellen) in Batch with one film template (Filmvorlage)

DVD authoring was yesterday - today is streamed from the NAS to the TV. So I now render video projects (.vsp) in VideoStudio as individual files (Videodatei erstellen). With Full HD 50p projects which lasts a few minutes and I can not cut in this time. With several hundred clips from vacation it sucks.

Hence my request for a new batch function for the encoder of VideoStudio: Several .vsp-files to be issued in Batch with a self-defined film original/template (Filmvorlage).

View 2 Replies View Related

VideoStudio :: X3 Won't Load Projects That Would Load Before

Dec 24, 2010

I have a project that suddenly won't load. I have 25 versions of it, I save it under a new file name each time in case I need to go back to an older version.

Trouble is most of the versions won't load! Only the very early versions will load. Some of the later version start to load then disappear.

Hardware hasn't changed on the PC, maybe the video drivers have been updated, thats about it.

View 2 Replies View Related

VideoStudio :: Move Timeline Over In Pro X4?

Jul 28, 2011

how to move everything i have in the timeline over so i can put other things in front of it?

View 4 Replies View Related

VideoStudio :: X4 - How To Move Timeline Around

Aug 25, 2012

I'm working on a short project on Corel Videostudio X4. I have been working on the timeline, but can't figure out how to move the timeline around. For example, is there a way I can take the whole project and push it forward 30 seconds so I can stick another clip in?

View 4 Replies View Related

VideoStudio :: How To Move Libraries Between Versions

Feb 26, 2011

Let's start with the business of getting titles across. Open the older version (VideoStudio 11, say) and create a project - on the time line of which you put all those titles you've spent hours putting together. Save the project as "DeleteNOW" in your main MyDoc's folder (where it's easy to find), and close VS11.

Open X4, and open the project you just saved. Create a new title folder, then highlight all the titles in the timeline and drag them to the title area above. Bingo.

It works with sounds too, so I assume it'll work with all other libraires, but have as yet to confirm.

View 2 Replies View Related

VideoStudio :: Move Clip Into New Library X5 Folder

Apr 19, 2012

How do I move a clip from the library it is in to a new (renamed) folder in VSX5 pro ultimate.

View 5 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved