According to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 RepliesI have a version of VideoStudio Pro X3 that came pre-installed on an HP computer. It tends to crash, but I can muddle thru to the point where I can save a project as a video file. Once that step is done, there is no option, not even a greyed out button, that allows me to burn a DVD. The saved file is there, just can't do anything with it. Been thru the process and the instructions several times, the option to burn disks seems to be missing. Is this some sort of trial version, maybe stripped down? The option to export to portable device is also limited to low res WMV, no MP4, 3g2, etc.
I tried to run an update, but the program comes back stating that no new updates are available.
I have been using Ulead VS 11+ for some time with great results. I recently upgraded to Corel VideoStudio Pro X3. The video capturing and editing works flawlessly however when I then want to burn the video to DVD by selecting the “share” tab and make disk it seems to start up DVD Factory which I find totally lame compared to the DVD burning associated with SV11. There seems to be no advanced functions accessible, I can’t seem to insert a photo into the back ground of the menu title, I can't create new decorations to create new back grounds for my title, I can’t burn the project to an .iso file etc. etc. In addition if you save the project and then come back to it later it does not pick up you saved project, and it does not indicate where it has saved to project. Am I missing something here. At the moment I edit in SV ProX3 and burn in VS11.
View 6 Replies View RelatedSince I am unable to burn DVDs with my current computer drive I want to burn them on another computer using the VSProX4 software. Also the video quality of the DVD I burned on this computer is poor. What is the easiest way to burn them on another computer? Should I create DVD folders or create disc image or just copy the files in the Corel VSPro folder on Documents and transfer it to the new computer. I rendered a video file from my project and it is saved in my projects folder in documents.
View 14 Replies View RelatedProjects do not finish burning to DVD. After I have finished editing my video I try to create disc using DVD format. Project completes video rendering but doesn¡¦t complete writing to disc. It stops half way. Then a message pops up saying ¡§The burner is busy for another application.¡¨ I press ok and another message comes up: ¡§The drive is busy or is being used by other applications. Please make sure the drive is ready, close all applications that may be using the drive (including folder windows), and try again. [534:-2147216300:0]¡¨
Drive: External drive Samsung SE-S204S USB CDDVDW
Video Studio 11 Plus
I have made sure no applications are open and the drive works fine with other software. I have included Print Screen shots of when I encounter the problem.
I have one that should hold 8.5 gigs. Not sure if I should try it. I have a 2 hour interview I want to burn and it will not fit on a regular DVD.
I wonder if there is another setting that would reduce the size some without degrading the quality much.
I've been having a problem trying to burn a project with three movies onto a DL DVD.
The three mpegs are:
1. 2.88GB (1:05:00)
2. 2.73GB (1:01:47)
3. 2.86GB (1:04:41)
Settings are:
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 4:3
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 256 kbps
Dolby Digital Audio. 48 KHz, 2/0(L,R)
I realize that I have a red area over the size limit for 8.5GB disk, but I've burned single layer disks with slightly higher size and the program compresses it to fit. But with this dual layer project, the burn process goes up to 97% and freezes. I've also only created and ISO file of the project, but, using ImageBurn, I find that the ISO file doesn't have the proper configuration to split the layers correctly. It tells me: "Optimal L1 Data Zone Start LBA: None Found! (VTS_01) This image has not been mastered correctly for burning onto a double layer (OTP Track Path) disc. None of the cells meet the 'DVD-Video specification' criteria for a potential layer break position."
Is there something I'm supposed to do first? Is there a step or two that I'm missing? Or does VSX2 have a problem burning DL DVDs?
I also realize that VSX2 was not designed for Windows 7, but I figured the ProPatch and Windows 7 updates were supposed to make VSX2 work on Windows 7.
With ProX5 I am trying to burn an MPEG4 HD project that is 1 hr 40 minutes long to a dual layer disk. I have a dual layer burner. I got an "unspecified error" on my first try. Should it work ok?
View 14 Replies View RelatedWhen I try to create a WMV HD 1280x720 file, VSX2 tries to use this:
Windows Media Video
24 bits, 208 x 160, 20 fps
Frame-based
22.050 KHz, 16 bits, Stereo
Windows Media Video 8 for Color Pocket PCs (225 Kbps)
When I try to create a CUSTOM profile, only WMV 8 profiles are shown. No WMV 9 or Ulead profiles.
Checking my C:, WMV 9 profiles are all present here: C:Program Files (x86)Windows Media ComponentsEncoderProfile
I've installed the latest versions of WMV 9. Still no luck.
VideoStudio Pro X2
Windows 7
AMD Phenom II X6 2.6 Ghz
6 Gig Ram
I bought a SABRENT USB-AVCPT video capture device that came bundled with ULEAD Video Studio 10 SE, and after loading the Windows 7 install kit, loaded it and have been pulling my hair out ever since.
Computer: Sony VIAO 64 bit, 3.4ghz dual core, 4GB main memory.
(1) Audio Input keeps constantly switching back to Microphone, even though the video stays on the USB Capture device. If I do ANYTHING, like stop a capture to double-check the captured file by playing it back, the display will still show the USB Audio but the capture is coming from the microphone. (It's rather frustrating to have 93 minutes of very fine video but 93 minutes of the gardener and the lawnmower, breakfast conversation, etc.)
(2) Attempts to change the Video Capture to 720x480, rather than the default 640x480, will quite often result in crashes, or in "Illegal function" error messages that cause AppCrash, or, if the app doesn't crash, it switches the sound back to Microphone and drops the video back to default.
(3) I cannot get it to let me capture any COMPRESSED video formats. So a 90 minute video ends up in a 105GB AVI file. (Previous discussion in here, with Ken Barry, if my memory (not on the video card!) is working right, indicated that this humongous file size might be the problem. But if I can't get it to capture something and compress it...) None of the other capture formats seem to work without Illegal Function, Illegal Function, and an AppCrash.
I'm running Ulead Video Studio 11, and I have AVI files I have downloaded from the internet. When I try to import them into Ulead I get the following message - ''(FILENAME) is not accessible'' followed by ''These files cannot be added to this project. These files may be of unknown file format, the computer does not have enough memory or the file is copyright protected''
If I right click the files, this is the info I get -
Image
624x352 Pixels
Audio
142kbps
MPEG Layer 3
Video
23 Frames Per Second
1117kbps
Am I missing some form of codec for this particular AVI ?
When I puschase the Diamond video capture device, it came with Ulead VideoStudio 10 SE. This program would not work in Windows 7
I tried to uninstall it, but I guess I did not do it correctly. A file is still running. It has to do with Windows color sheme.
After starting computer up, a window appears saying something like Windows color sheme has been changed to 7 basic. Because (and I can't recall all the words, but it has to do with a Ulead file still running)
I would like to completely remove any Ulead files still occupying space in the computer. If I knew where the file might recide I could go into the registry and delete it.
when trying to download movie from Sony camcorder everything appears fine until Video Studio program stops camcorder on its own and displays unknown error. This sometimes happens after 30, 40 even 50 minutes, but I have yet to be able to download entire 60 minute tape to computer. I am trying to convert Digital 8 movies to DVD.
View 4 Replies View RelatedCan not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
I have been using different versions of Ulead for over 20 years! In the past I was able to save an image in JPEG format on my desktop after saving the clip as an image in the library. Now when I save it to the desktop it only saves it as a "uvs file" which is not recognized by photo editing software
[URL]........
I can't seem to get my audio on my home videos to transfer with the video.
View 8 Replies View RelatedMY version of Ulead VideoStudio 11.5 crashed and upon rebooting I noticed that the Attributes tool has completely disappeared. I had this problem once before and I found a post online that cured the problem, unchecking a box somewhere resolved it....but I cant find or remember what to do..
View 6 Replies View RelatedMy Video Studio X5 refuses to create DVD's.
The system runs fine apart from that. When I go to Share, Create Disc, DVD, then check Create Disc, Create DVD Folders, Create Disc Image, Normalize Audio, Delete Temporary Files in Working Folder. Then Click Burn, everything proceeds as normal until both progress bars reach 99%, then I get the following message " Unspecified Error -- 5.0.0".
Nothing gets transferred to disc. This is the same for all projects. I have already tried re-installing VS X5. Nothing seems to make any difference.
I copied the files over. I opened Ulead and tried to open the project I was working on. So it wanted me to Relink, which I did. But I got the error message: File format mismatch [16803:1:2] I checked the Smart Proxy.So I copied the files back to the old computer. I can open up the project with no problems.
View 7 Replies View RelatedI am trying to burn multiple copies of a video I have produced. In the final screen to create a disk there is an option to choose multiple copies. I always select multiple copies and it burns the first one perfectly, the burner drawer opens and it asks me to provide another disk. When I do so I get the error: "Does not support burning of DVD-Video on Empty disc. Supports burning on DVD-R/DVD-R DL/DVD-RW/DVD+R DL/DVD+RW disc. Please insert another disc to continue, or click Cancel to stop the process."
The disk burner is a ASUS BW-12D1S-U.
This is quite frustrating as I seem to have to cancel each time and ask it to generate another disc, which I suspect is a longer process then just making multiple copies.
I have been using corel video studio pro x4 for about 6 months for uploading videos to youtube. Works just fine. I have now edited and composed a 50 minute video that I have tried to burn onto dvd+r and when the finished product is played it starts out just fine and in time. Minute by minute though the audio starts to lag away from the video being displayed to where at the end of my 50 minute dvd it is off by more than 5 seconds.
View 1 Replies View RelatedJust skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
I'm in a real pickle: Bought a top shelf Sony V. Cam. In HD the format is AVCHD, which X5 Pro doesn't want to know. The Sony software,'Play Memory Home' only allows basic editing like trimming of clips. So I tried 'Batch Convert' and picked MPEG as target to edit my 1 hr 4 mins of Kruger Park wildlife, which entails hours of work. When I start on the disc burning procedure (or video file production) after several mins I get the 'The program encountered an unspecified error and will be closing down',
I have tried different output choices, like 'DVD" or 'AVCHD' at different compression,tried deselecting hard- and software acceleration etc, to no avail, same error every time, I get told to send the Dump file to Corel for analysis, fat lot that would do! If I started with a conversion to a different file system I would probably have to go through the editing again, sound, transitions and all?
Does Video Studio Pro X4 allow for the creation of DVDs with switchable sub-titles, ie giving the viewer the option to watch the movie with sub-titles (eg English sub-titles if another language is used in the movie) or without subtitles?
View 2 Replies View RelatedI have been using Video Studio Pro x2 for several years to edit and burn DVDs from the edited material with no problems. But for the last several months the burning process stops at the end of the VOB (whatever that is) but the blank disc is altered so it is unusable. It says that the Corel softwart has encountered a problem and has to close. I send a message every time but nothing comes of it. Another recurring problem is that it keeps telling me that the program will take a long time to burn even though I have checked the box to not show this message again.
The only way I have found to get the software to perform properly is to remove and reinstall the soft ware. Normal operation lasts for about four discs and the problem reoccurs. I have cleaned the hard drive of unnecessary files, etc. All my security updates are current.
I used this software on my previous two computers with no problems at all despite a much smaller Hard Drive, slower motherboard and much less memory.
I'm using VideoStudio proX5. Previous versions of the VS program have allowed me to opt out of using a preset image template for the menu pages and instead to choose a background image of my own to put behind page headings and video thumbnails or text titles. I can't see how to do this in VSproX5. Any background image I introduce is always partly covered by unwanted areas of template and the right-click menus won't let me delete or move them to the back. I just want a plain uniform background and to be able to choose the coolur.
View 4 Replies View RelatedI am trying to transfer 8mm tapes to my computer to make DVD's. I bought a "Startech S-Video / Composite to USB Video Capture Cable w/ TWAIN and Mac® Support" so that I could use any software w/it. I thought I could use Microsoft Movie Maker, but it doesn't work. So, I got VideoStudio Essentials X4 with the capture device. All my tapes are fine, and they play fine with I'm capturing...but when I go to view the video, it's jumpy. I only did a few minutes to see how it would do and that's where I hit a wall. I've emailed with Corel support for almost 2 months to find out that they don't support the software I got. As a last resort, he asked that I download the free version of VideoStudio Pro X4. I did, and still the same thing happens.
View 14 Replies View RelatedI have been using VS X5 to create DVDs and ISOs from MPEG2 clips that are 30-60 minutes in length, so I end up with one clip per DVD. Now I'm in the process of taking approx. 60 MPEG2 clips, which were originally VHS and VHS-C movies of my kids at various events, and creating 60 minute DVDs and/or ISOs. The MPEG2 clips range in length from 2 to 20 min. When creating the DVDs/ISOs, I want to include the who, where, and when information prior to the video clip. My current thought is to create a timeline in the following format: Title1, Clip1, Title2, Clip2, etc. I would add chapter markers at the start of each title. Once I have approx. 60 minutes on a timeline I would create menus and DVDs/ISOs.
I create a movie file from each MPEG2 that includes content info and use these movie files when creating the DVD/ISO.
Im editing my home dvds that i have imported to my hard drive, now using VideoStudio x4 to crop them into the right clips and adding text,
So far ive managed after some reading to set the in and out points, drag it to the time line, then add text... I had a bit of trouble finding out how to save it, but i think im right in clicking "3 share" and then "create video file" to save the clip ?
Once ive done this what is the best format to save the clip as? baring in mind once i have all my clips cropped with text at the beginning, im hoping to burn them all to a DVD, and add menus... Is the menus also something that can be done on Video studio?
Recently I am getting an error message when the X6 starts to burn the DVD.
All procesess before ( multiplexing, VOB generation etc.) are working fine but when the DVD steps into the burn phase there is an error 5.0.0. sometimes it goes several times not. The error has been repeated at least on 3 different computers.
The X6 is working fine. On my computer I did not change anything except recorded new videos for editing.
In previous versions I created VSP files. When I came to create a disk I could add one or more VSP files in the share section and then I could click on burn and go and have a meal. The VSP files don't now seem to be any use at all in the share section. I am back to using version 12 that seems to work
View 12 Replies View Related