VideoStudio :: Pro X2 Can't See Ulead WMV 9 Profiles
Mar 31, 2011
When I try to create a WMV HD 1280x720 file, VSX2 tries to use this:
Windows Media Video
24 bits, 208 x 160, 20 fps
Frame-based
22.050 KHz, 16 bits, Stereo
Windows Media Video 8 for Color Pocket PCs (225 Kbps)
When I try to create a CUSTOM profile, only WMV 8 profiles are shown. No WMV 9 or Ulead profiles.
Checking my C:, WMV 9 profiles are all present here: C:Program Files (x86)Windows Media ComponentsEncoderProfile
I've installed the latest versions of WMV 9. Still no luck.
VideoStudio Pro X2
Windows 7
AMD Phenom II X6 2.6 Ghz
6 Gig Ram
View 7 Replies
ADVERTISEMENT
Dec 30, 2011
I bought a SABRENT USB-AVCPT video capture device that came bundled with ULEAD Video Studio 10 SE, and after loading the Windows 7 install kit, loaded it and have been pulling my hair out ever since.
Computer: Sony VIAO 64 bit, 3.4ghz dual core, 4GB main memory.
(1) Audio Input keeps constantly switching back to Microphone, even though the video stays on the USB Capture device. If I do ANYTHING, like stop a capture to double-check the captured file by playing it back, the display will still show the USB Audio but the capture is coming from the microphone. (It's rather frustrating to have 93 minutes of very fine video but 93 minutes of the gardener and the lawnmower, breakfast conversation, etc.)
(2) Attempts to change the Video Capture to 720x480, rather than the default 640x480, will quite often result in crashes, or in "Illegal function" error messages that cause AppCrash, or, if the app doesn't crash, it switches the sound back to Microphone and drops the video back to default.
(3) I cannot get it to let me capture any COMPRESSED video formats. So a 90 minute video ends up in a 105GB AVI file. (Previous discussion in here, with Ken Barry, if my memory (not on the video card!) is working right, indicated that this humongous file size might be the problem. But if I can't get it to capture something and compress it...) None of the other capture formats seem to work without Illegal Function, Illegal Function, and an AppCrash.
View 1 Replies
View Related
Mar 14, 2012
I'm running Ulead Video Studio 11, and I have AVI files I have downloaded from the internet. When I try to import them into Ulead I get the following message - ''(FILENAME) is not accessible'' followed by ''These files cannot be added to this project. These files may be of unknown file format, the computer does not have enough memory or the file is copyright protected''
If I right click the files, this is the info I get -
Image
624x352 Pixels
Audio
142kbps
MPEG Layer 3
Video
23 Frames Per Second
1117kbps
Am I missing some form of codec for this particular AVI ?
View 14 Replies
View Related
May 14, 2011
When I puschase the Diamond video capture device, it came with Ulead VideoStudio 10 SE. This program would not work in Windows 7
I tried to uninstall it, but I guess I did not do it correctly. A file is still running. It has to do with Windows color sheme.
After starting computer up, a window appears saying something like Windows color sheme has been changed to 7 basic. Because (and I can't recall all the words, but it has to do with a Ulead file still running)
I would like to completely remove any Ulead files still occupying space in the computer. If I knew where the file might recide I could go into the registry and delete it.
View 2 Replies
View Related
Feb 13, 2012
when trying to download movie from Sony camcorder everything appears fine until Video Studio program stops camcorder on its own and displays unknown error. This sometimes happens after 30, 40 even 50 minutes, but I have yet to be able to download entire 60 minute tape to computer. I am trying to convert Digital 8 movies to DVD.
View 4 Replies
View Related
Sep 19, 2008
Can not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
View 5 Replies
View Related
Sep 29, 2011
I have been using different versions of Ulead for over 20 years! In the past I was able to save an image in JPEG format on my desktop after saving the clip as an image in the library. Now when I save it to the desktop it only saves it as a "uvs file" which is not recognized by photo editing software
[URL]........
View 3 Replies
View Related
Nov 20, 2011
I can't seem to get my audio on my home videos to transfer with the video.
View 8 Replies
View Related
Mar 11, 2012
MY version of Ulead VideoStudio 11.5 crashed and upon rebooting I noticed that the Attributes tool has completely disappeared. I had this problem once before and I found a post online that cured the problem, unchecking a box somewhere resolved it....but I cant find or remember what to do..
View 6 Replies
View Related
Jan 6, 2013
According to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 Replies
View Related
Aug 24, 2010
I copied the files over. I opened Ulead and tried to open the project I was working on. So it wanted me to Relink, which I did. But I got the error message: File format mismatch [16803:1:2] I checked the Smart Proxy.So I copied the files back to the old computer. I can open up the project with no problems.
View 7 Replies
View Related
Oct 29, 2010
Just skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
View 11 Replies
View Related
Nov 22, 2013
I was having an issue in Corel VideoStudio Pro x4. I could not create custom video output files (profiles; see attached image). So I ran VideoStudio as admin. No luck. I reinstalled it as admin and ran it as admin. No luck. I tried manually changing the files corresponding to the default video profiles with notepad. Initially I was denied access. Through a rigorous method of trying to figure out why I was denied access to changing the files, I found out that I was denied access to even renaming the Corel folder (with nothing running corel programs).
I downloaded a better version of task manager to figure out what must be running in the background. Nothing was running anything located in the Corel folder. I still couldn't even rename the corel folder on an admin account. I booted in safe mode (and then I could change the folder name, etc), and changed one of the default video output profiles. The changes stuck even across computer reboots, but my changes were not recognized in VideoStudio (no clue why; I changed the profiles found in the profile subfolder of Corel).
So, I figured what with the sale going on, I might as well upgrade to Pro x6. Bought it. Uninstalled VideoStudio x4 completely. Deleted the Corel folder entirely from Program Files (x86). Installed VideoStudio x6. Got it launched as admin, attempted to create a profile, and got the same error. Trying to rechange the Corel folder results in the same denial of permissions that I used to have, even after running it as admin, disabling UAC, and changing the security permissions on the folder itself.
How to create a custom profile. Attached is example errors. Need tocreate a profile that is the exact same as the WMV HD 720 30p default profile, only with better sound (24 bits instead of 16 bits and/or 48/96KHz instead of 41KHz), and then direct me to which folder I should place said filed in (as changing stuff in the profile folder didn't seem to make much difference).
CLICK IMAGE TO ENLARGE
View 5 Replies
View Related
Dec 27, 2010
X3 on Windows 7 (can replicate this on both Home Premium and Pro). I migrated from XP and am very very happy with the way X3 runs on Windows 7 but I am having a big problem. I had a library of customized Windows Media Encoder settings (different bit rates, frame sizes, etc.) for output as .WMV files. When I try to copy or customize any of the existing encoder profiles (which all work just fine) the system does not allow me to save. I have set full permissions for the logged user and made sure the directory is not read only.
View 14 Replies
View Related
Nov 14, 2012
I am having some issues with surface profiles on a dreffed alignment no updating dynamically.
Currently it requires me to set them to static, then back to dynamic and they update.
I am well aware of the issue of dreffed surface profiles staying static. I am using the work around of dreffing in the surface and sampling in the drawing using the dreffed alignment.
Civil 3D 2014 (SP1)
Win 7 Pro x64
DELL Precision Workstation T3500
Intel Xeon 3.3GHz (w3680)
24Gb Ram
NVIDIA Quadro 2000 (1GB)
View 1 Replies
View Related
Jun 15, 2012
I have PSPX2 and run XP Home.
Until recently my Ulead Art Texture worked perfectly.
Now when I go to the Edit area all the pallettes are greyscale.
I've tried uninstalling and reinstalling and cannot get the colours back into the pallettes.
View 4 Replies
View Related
May 6, 2013
I originally thought I would revert to IE 8, I thought it was because I had switched to IE 10. But I did find someone who blamed it on IE 8, so at this point IE is no longer my default browser.Windows 7 Pro 64-bit on my home computer with IE 10. often when I click on a video or a link on a web page, the attached jpeg comes up, the window turns black and I have to use Task Mgr to kill IE. So until I get to the bottom of this FF is my browser.Is it malware or a virus? MSE and Malwarebytes Pro up to date and frequent scans.
View 1 Replies
View Related
Mar 31, 2013
Trying to find ICC Profiles. I am a college student going for my BS in Photography. Our assignment is to take photo paper from three different manufactures and download the ICC Profiles for each of our papers chosen. Let me tell you this is not as easy as it seems! Where I can find the profiles for Adobe PS for different types of photo paper. Each manufacture only gives the ICC profile for their products. No scanned profiles are available.
View 3 Replies
View Related
Feb 19, 2009
I just noticed a link to Adobe ICC profiles but there was no description of what they are or what they do. I'm using CS4 and LR2.
View 1 Replies
View Related
Jan 26, 2013
I have viewed many videos and read much literature to no avail.
View 13 Replies
View Related
Sep 22, 2012
I shoot with Canon EFS 55-250 and get the image as a JPG and CR2.
In the RAW file the EF-S 55-250 is recognized and selected the correct profile. In the JPG file, the lens is detected but the lens profile is set to mark = None, model = None. While I can make the change to Canon but still does not choose the lens EFS 55-250. It is missing. The list contains only 14 lenses. For RAW files, the selection includes a lot more Canon lenses.Why the EFS 55-250 exists only for RAW files and not for JPG? Are the profiles different?
View 3 Replies
View Related
Jan 8, 2013
I am running PS 6 for win64. Today I suddenly starting getting an error message saying that my ICC profiles are invalid. When I try to write a raw file to .tif after it has been converted to black/white, I get a corrupted .tif file.
So I have been trying to reinstall these profile files using the ones for PS4 as provided on your web site. But they won't install properly, and the problem persists.
View 16 Replies
View Related
Sep 12, 2012
I have just installed CS6 standard. I would like to put my colour profiles in Photoshop CS6 under Mountain Lion from CS5. Those files are most used for printing from a wide inkjet printer. Where do I put the colour profiles? I am not sure if the colour profiles need updated or not.
View 1 Replies
View Related
Sep 2, 2007
I'm having some trouble with colour profiles in OSX. Basically i use a Mac laptop and Apple display. When i work in photoshop, and then save an image for web use, the colour profile difference means that the saved image looks quite a lot different to the photoshop version (this happens on both the laptop screen, and external display.
All i want is the colours in photoshop to display how they would look in my browser. So if i set a page background on a webpage to be #c5c1ba and then open up photoshop and start colouring with #c5c1ba, they look the same shade.
View 1 Replies
View Related
Feb 12, 2004
I have recently started using a printer profile (Epson photo 1270). My query is this. I take a picture with my camera (Canon 10D), which when viewed on my monitor in ACDsee looks about right, colors ok, just needs a few touches here and there maybe. I then open it in Photoshop using the printer profile and the pictures looks very different. Now I realise what is happening but I am having great trouble adjusting the picture back to how it looked originally(which I was fairly happy with). I also know that if I can adjust the picture to how it looked it will print out almost identical to how it looks on the screen, so that is ok. It just takes a lot of time to do this using the Photoshop tools, and it is so hit and miss to try and put it right and get back to the original colors etc. Is there a shortcut that can be used, using the color values from the original view before it was opened in Photoshop or something like that? It just seems a lot of work for every individual photograph I may want to print out. I can compare the two views of the same photograph by having Photoshop and ACDsee open together.
View 1 Replies
View Related
Apr 28, 2007
If I open a document using a color profile and I save it as a JPEG, will everyone else see the color profile?
View 8 Replies
View Related
Nov 11, 2008
I'm trying to get my magazine ad to match the original as close as possible. The first ad I placed came back muddy and dark. So I had the magazine contact the printer they use to get an ICC profile for me that I could load as the working color space in photoshop to prepare my file. Im I doing the right thing here? Is my solution loading the same working color space as the printer and then prepare my file to get a more accurate print?
Assuming that this was my fix I installed the ICC profile they sent me and when I went to "Load" that profile from the "Color Settings" dialog window and surfed to the folder I saved the profile in it doesn't show up. At the bottom of the "Load" dialog window there is a "Files of Type" drop down arrow and the only two file types listed are .CSF and .PSP. No .ICC file type there.
View 1 Replies
View Related
Aug 3, 2009
I have been charged with taking over a newsletter for our other shop. They print this on a web press. The lady there has told me that the pictures need to compensate for a 30% dot gain. Can I just apply the Dot Gain 30% profile in Photoshop and that takes care of it?
When I do this it darkens the picture on my screen considerably, is that just showing you what it will look like when printed?They also want the pics @ 85lpi and 300dpi, does this sound correct?This is my first foray into the web design world and the newsletter has looked pretty bad in the past and I think this may have something to do with it.
View 1 Replies
View Related
Aug 21, 2008
I'm having a very strange issue with colour management in Photoshop CS2 currently.
Photoshop seems to be calibrating all documents in a strange way on only *one* monitor. If I drag the file across to the other monitor the colour is completely different.
Of course it sounds like my monitors being off, however when dragging the file across monitors Photoshop slowly updates the colours for the next monitor. You can see it display the wrong colour at first, then correct it (hopefully that makes sense).
View 5 Replies
View Related
Sep 12, 2006
I'm currently working quite a lot with IPTC information from different images that are then uploaded to a web site and parsed with Perl's Image::IPTCInfo module. However, I've stumbled across some images that can't read by this module but the IPTC does show up in Photoshop.
Therefore, I went ahead and examined a "good" image file with the "identify" tool provided by ImageMagick and the following is a sample output (for the IPTC profile). I divide it into two sections for explanatory purposes. Section 1:
Code:
Profile-iptc: 1044 bytes
0x00000000: 42494d04 04000000 0004071c 02000002 00021c02 8BIM----------------
0x00000190: 7a000576 69636b79 1c028700 001c0228 00514869 -z--vicky-------(-QH
0x00000320: 7370616e 69632070 75626c69 63617469 6f6e7320 ispanic publications
0x000004b0: 696e2074 68652055 5320616e 64204361 6e616461 in the US and Canad
0x00000640: 2043656e 7472616c 20616e64 20536f75 74682041 a Central and South
0x000007d0: 6d657269 63612072 69676874 73204f6e 6c79211c America rights Only!
0x00000960: 02d70000 1c02ca00 001c022f 00001c02 0700001c ------------/-------
0x00000af0: 02d80000 1c024b00 001c02db 00001c02 8200001c -------K------------
0x00000c80: 02370008 32303036 30393036 1c02d300 001c02da --7--20060906-------
0x00000e10: 00001c02 3e00001c 02640000 1c022500 001c0246 ----->----d----%----
0x00000fa0: 00001c02 c900001c 025f000a 43616c69 666f726e F---------_--Califor
0x00001130: 69611c02 3f00001c 02670000 1c02d900 001c02d4 nia--?----g---------
0x000012c0: 00001c02 73001342 472f5468 65204772 6f736279 -----s--
0x00001450: 2047726f 75701c02 2600001c 02320000 1c020500 y Group--&----2-----
0x000015e0: 2b4b2e43 4f53544e 45522026 20432e42 41554d47 -+K.COSTNER & C.BAUM
0x00001770: 41544e45 52204154 20544845 20434552 454d4f4e GATNER AT THE CEREMO
0x00001900: 59203032 1c022300 001c022d 00001c02 55001342 NY 02--#---------U--
0x00001a90: 472f5468 65204772 6f736279 2047726f 75701c02 -
0x00001c20: 7600001c 021b0000 1c02cd00 001c0274 00001c02 -v--------------t---
0x00001db0: 5a000b4c 6f732041 6e67656c 65731c02 4100001c -Z--Los Angeles--A--
View 1 Replies
View Related
Jan 2, 2006
Im running PS CS on a PC and printing (mainly photographic images) with an Epson 1290 using a continuous ink system with Ilford paper. I have calibrated my monitor using a Spyder and have had the printer/paper/ink combination profiled. Despite all of that I am still having problems getting the printed image to match the screen. Quite often there appears to be an enhanced saturated red tint over the image. On some of the B&W images I have also been getting a red/magenta cast in my white highlights!.
I have downloaded new print drivers, I have also had my profile regenerated 3 times all with no effect. I have also just connected my printer to another computer and printed the same images from Elements employing the profile for the printer/paper/ink combo. One image came out more like it should with a reduced red cast but some of the others now appeared fine of both systems after printing them one after the other, i.e. my main system is now looking OK.
View 3 Replies
View Related
