VideoStudio :: Remove All Ulead Files
May 14, 2011
When I puschase the Diamond video capture device, it came with Ulead VideoStudio 10 SE. This program would not work in Windows 7
I tried to uninstall it, but I guess I did not do it correctly. A file is still running. It has to do with Windows color sheme.
After starting computer up, a window appears saying something like Windows color sheme has been changed to 7 basic. Because (and I can't recall all the words, but it has to do with a Ulead file still running)
I would like to completely remove any Ulead files still occupying space in the computer. If I knew where the file might recide I could go into the registry and delete it.
View 2 Replies
ADVERTISEMENT
Mar 31, 2011
When I try to create a WMV HD 1280x720 file, VSX2 tries to use this:
Windows Media Video
24 bits, 208 x 160, 20 fps
Frame-based
22.050 KHz, 16 bits, Stereo
Windows Media Video 8 for Color Pocket PCs (225 Kbps)
When I try to create a CUSTOM profile, only WMV 8 profiles are shown. No WMV 9 or Ulead profiles.
Checking my C:, WMV 9 profiles are all present here: C:Program Files (x86)Windows Media ComponentsEncoderProfile
I've installed the latest versions of WMV 9. Still no luck.
VideoStudio Pro X2
Windows 7
AMD Phenom II X6 2.6 Ghz
6 Gig Ram
View 7 Replies
View Related
Dec 30, 2011
I bought a SABRENT USB-AVCPT video capture device that came bundled with ULEAD Video Studio 10 SE, and after loading the Windows 7 install kit, loaded it and have been pulling my hair out ever since.
Computer: Sony VIAO 64 bit, 3.4ghz dual core, 4GB main memory.
(1) Audio Input keeps constantly switching back to Microphone, even though the video stays on the USB Capture device. If I do ANYTHING, like stop a capture to double-check the captured file by playing it back, the display will still show the USB Audio but the capture is coming from the microphone. (It's rather frustrating to have 93 minutes of very fine video but 93 minutes of the gardener and the lawnmower, breakfast conversation, etc.)
(2) Attempts to change the Video Capture to 720x480, rather than the default 640x480, will quite often result in crashes, or in "Illegal function" error messages that cause AppCrash, or, if the app doesn't crash, it switches the sound back to Microphone and drops the video back to default.
(3) I cannot get it to let me capture any COMPRESSED video formats. So a 90 minute video ends up in a 105GB AVI file. (Previous discussion in here, with Ken Barry, if my memory (not on the video card!) is working right, indicated that this humongous file size might be the problem. But if I can't get it to capture something and compress it...) None of the other capture formats seem to work without Illegal Function, Illegal Function, and an AppCrash.
View 1 Replies
View Related
Mar 14, 2012
I'm running Ulead Video Studio 11, and I have AVI files I have downloaded from the internet. When I try to import them into Ulead I get the following message - ''(FILENAME) is not accessible'' followed by ''These files cannot be added to this project. These files may be of unknown file format, the computer does not have enough memory or the file is copyright protected''
If I right click the files, this is the info I get -
Image
624x352 Pixels
Audio
142kbps
MPEG Layer 3
Video
23 Frames Per Second
1117kbps
Am I missing some form of codec for this particular AVI ?
View 14 Replies
View Related
Feb 13, 2012
when trying to download movie from Sony camcorder everything appears fine until Video Studio program stops camcorder on its own and displays unknown error. This sometimes happens after 30, 40 even 50 minutes, but I have yet to be able to download entire 60 minute tape to computer. I am trying to convert Digital 8 movies to DVD.
View 4 Replies
View Related
Sep 19, 2008
Can not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
View 5 Replies
View Related
Sep 29, 2011
I have been using different versions of Ulead for over 20 years! In the past I was able to save an image in JPEG format on my desktop after saving the clip as an image in the library. Now when I save it to the desktop it only saves it as a "uvs file" which is not recognized by photo editing software
[URL]........
View 3 Replies
View Related
Nov 20, 2011
I can't seem to get my audio on my home videos to transfer with the video.
View 8 Replies
View Related
Mar 11, 2012
MY version of Ulead VideoStudio 11.5 crashed and upon rebooting I noticed that the Attributes tool has completely disappeared. I had this problem once before and I found a post online that cured the problem, unchecking a box somewhere resolved it....but I cant find or remember what to do..
View 6 Replies
View Related
Jan 6, 2013
According to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 Replies
View Related
Aug 24, 2010
I copied the files over. I opened Ulead and tried to open the project I was working on. So it wanted me to Relink, which I did. But I got the error message: File format mismatch [16803:1:2] I checked the Smart Proxy.So I copied the files back to the old computer. I can open up the project with no problems.
View 7 Replies
View Related
Oct 29, 2010
Just skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
View 11 Replies
View Related
Jun 15, 2012
I have PSPX2 and run XP Home.
Until recently my Ulead Art Texture worked perfectly.
Now when I go to the Edit area all the pallettes are greyscale.
I've tried uninstalling and reinstalling and cannot get the colours back into the pallettes.
View 4 Replies
View Related
Feb 2, 2013
I'm using LR 4.3, and would like to know how to determine which .dat cache files are associated with a certain folder of images. I don't know programming code, and, when I open a .dat cache file, I cannot determine which image file it goes with.
I've noticed that when I remove a folder from Lightroom, the cache files for the images in that folder remain, because the size of the cache doesn't change. I know I can flush the cache, but I don't want to have to reload tons of .dat files already present in the cache.
View 12 Replies
View Related
May 6, 2013
I originally thought I would revert to IE 8, I thought it was because I had switched to IE 10. But I did find someone who blamed it on IE 8, so at this point IE is no longer my default browser.Windows 7 Pro 64-bit on my home computer with IE 10. often when I click on a video or a link on a web page, the attached jpeg comes up, the window turns black and I have to use Task Mgr to kill IE. So until I get to the bottom of this FF is my browser.Is it malware or a virus? MSE and Malwarebytes Pro up to date and frequent scans.
View 1 Replies
View Related
Mar 15, 2011
How do you remove the grid lines in VS X4 Pro? I could not find anything under preferences or a switch near the preview window.
View 4 Replies
View Related
Aug 1, 2012
I only use about three of the fx. Is there a way to remove the others so I don't have to scroll through the list?
View 1 Replies
View Related
May 25, 2012
I am using one of the premade text effect that fades-in two lines of text. I want this fadein to (1) last 3 seconds but the title, once fully into view, to (2) remain on the screen for 10 seconds. I just can't figure out this second part.
I can duplicate the original title so the two lines are positioned correctly after the effect ends but then the effect starts over again. I can't get the two lines in the exact same places by recreating them. And if I take a screen shot of the final frame, again, I can't get it positioned so the lines of text are in the exact correct place.
View 10 Replies
View Related
Aug 28, 2010
Trying to take a chunk of frames out of the middle of a clip. The manual says:
"The Navigation Panel is used to preview and edit the clips used in your project. Use the Navigation Controls to move around a selected clip or your project. Use the Trim Markers and Scrubber to edit your clips."
I have done that. Trim Markers set to start and end of frames to be removed. So what is next? Where is the magic button that removes the unwanted frames? Have tried Delete but nothing apparently changes.
While I am at it, how do the scissors work? Can click on them at the start of a series of frames but they become greyed out after that.
Have done a lot of stuff in Windows Movie Maker, which was much more straightforward, but unfortunately it can't cope with HD. VSX3 manual is good at giving you various different ways of selecting frames for deletion, but seems to miss out on the punch line: "now do this to delete them".
View 11 Replies
View Related
Dec 17, 2013
I have a bundle of .mpg movies with unwanted sound included. Can I remove it?
Background: Took a bunch of ancient 8mm movies to a store and had them put on a CD. They came back in sets of .bup, .ifo, and .vob files. VideoStudio Pro X6 inducted them as .mpg files. VS was recently bought in a box; allowed update after installation. How to check the version.
View 1 Replies
View Related
Oct 6, 2010
I'm trying to remove a watermark in an old movie made of my son in high school (about 8 yrs old), by a friend of his. It's right in the middle of the screen in bright red. They didn't care about it back then as it allowed them to format their movie online. Before I put this very short clip in my memorial video I want to clear that out. Don't know what original software was used. My son's friend can't remember either. Does Videostudio have a way to fix this?
View 2 Replies
View Related
Oct 5, 2011
I have a video, recorded from a TV broadcast, that has a station logo on the screen. I understand EditStudio Plus has a way of "removing" this. Does Video Studio have a similar function (other than just super-imposing a black box over the logo)?
View 3 Replies
View Related
Feb 19, 2012
I got great results with X4, until it installed the service pack this week.. Now i cannot render an mp4 without long sections 'staggering' - like a strobing effect on the entire render, the picture lurches as it plays, and things like VLC hang when scanning thru the file..
Also, the framrate i set now has little relation to the actual outcome..
The piece i am rendering fails at a different point each time - the staggering starts and thats that, framrate drops to about 2fps - utterly useless..
I have tried removing the install and re-installing, but when i do this i can clearly see by 'check for updates' that there are no updates, which means SP2 is surviving the uninstall.
I have tried every combination of every setting for days, this is a new problem directly related to the service pack..
Where can i get a manifest of the files in the service packs? i'm going to have to remove them all by hand and start again..
View 8 Replies
View Related
Oct 14, 2007
I want to remove the time code that leaves in the video and cannot. Since one becomes?
View 14 Replies
View Related
Sep 1, 2013
I'm finishing a project but to keep my HD a little bit clean I would like to remove the unused video and photo,
I know that you can do this one by one, but if you don't document the used parts how to identify the used and unused ones?
View 6 Replies
View Related
May 11, 2012
Using Corel VS X4. I am trying to reduce or remove wind noise from video clips. These clips also have narration, which at times is inaudible due to the background wind noise! Any way to remove or reduce this background noise?
View 2 Replies
View Related
Jan 24, 2012
I added a number of clips to a new project and then realized the result would be too long for a good quality DVD. I've edited the ones I want to retain and deleted the others. The deleted clips all followed the edited ones.
However the space taken by the deleted ones still appears on the timeline although the clips are not on the storyboard. The project duration window still shows the original length.
View 2 Replies
View Related
Oct 17, 2011
I have taken a short video of a man sitting at a table. There is no movement but the man is talking. A little bit of the microphone can be seen. I tried to take the video into Paintshop Pro X3 to remove this object with smart carver. Is there a way to edit this video so that unwanted objects can be removed from the frames. I have Paintshop Pro X3 on this computer, and PhotoImpact on another computer. Can either of these programs be used to remove objects from frames.?
View 1 Replies
View Related
Sep 23, 2010
I need to remove the update notifications and messages that VS X3 displays upon startup from ever happening. Corel tech support seems clueless, they offer such as "Download and install the updates", which is not an option.
View 12 Replies
View Related
Mar 15, 2011
How do I remove a small section from the middle of a clip? The help section tells how to shorten a clip or split it in two but not what i want to do.
View 3 Replies
View Related
Nov 21, 2013
Some of the Instant Projects in VideoStudio 6 might be useful if one could remove the "VideoSudio" text from them and maybe even add new text. Is there a way to do that? If not, what are they for?
View 5 Replies
View Related
