I have been using different versions of Ulead for over 20 years! In the past I was able to save an image in JPEG format on my desktop after saving the clip as an image in the library. Now when I save it to the desktop it only saves it as a "uvs file" which is not recognized by photo editing software
[URL]........
After trimming a clip I can save it by File - Save trimmed clip. But if I use filter(s) with trimming before, after or no trimming, the File - Save trimmed clip greys out and I could not find any instruction how to save (render) the clip.
View 4 Replies View RelatedI am really new to video Studio Pro X4. How can I isolate a single cell (frame) of a video clip and export it or save it as JPG or BMP or some other graphics format for use as a pic in another application. i.e. photosho, paint shop, Corel Draw, etc.
View 4 Replies View RelatedWhen I try to create a WMV HD 1280x720 file, VSX2 tries to use this:
Windows Media Video
24 bits, 208 x 160, 20 fps
Frame-based
22.050 KHz, 16 bits, Stereo
Windows Media Video 8 for Color Pocket PCs (225 Kbps)
When I try to create a CUSTOM profile, only WMV 8 profiles are shown. No WMV 9 or Ulead profiles.
Checking my C:, WMV 9 profiles are all present here: C:Program Files (x86)Windows Media ComponentsEncoderProfile
I've installed the latest versions of WMV 9. Still no luck.
VideoStudio Pro X2
Windows 7
AMD Phenom II X6 2.6 Ghz
6 Gig Ram
I bought a SABRENT USB-AVCPT video capture device that came bundled with ULEAD Video Studio 10 SE, and after loading the Windows 7 install kit, loaded it and have been pulling my hair out ever since.
Computer: Sony VIAO 64 bit, 3.4ghz dual core, 4GB main memory.
(1) Audio Input keeps constantly switching back to Microphone, even though the video stays on the USB Capture device. If I do ANYTHING, like stop a capture to double-check the captured file by playing it back, the display will still show the USB Audio but the capture is coming from the microphone. (It's rather frustrating to have 93 minutes of very fine video but 93 minutes of the gardener and the lawnmower, breakfast conversation, etc.)
(2) Attempts to change the Video Capture to 720x480, rather than the default 640x480, will quite often result in crashes, or in "Illegal function" error messages that cause AppCrash, or, if the app doesn't crash, it switches the sound back to Microphone and drops the video back to default.
(3) I cannot get it to let me capture any COMPRESSED video formats. So a 90 minute video ends up in a 105GB AVI file. (Previous discussion in here, with Ken Barry, if my memory (not on the video card!) is working right, indicated that this humongous file size might be the problem. But if I can't get it to capture something and compress it...) None of the other capture formats seem to work without Illegal Function, Illegal Function, and an AppCrash.
I'm running Ulead Video Studio 11, and I have AVI files I have downloaded from the internet. When I try to import them into Ulead I get the following message - ''(FILENAME) is not accessible'' followed by ''These files cannot be added to this project. These files may be of unknown file format, the computer does not have enough memory or the file is copyright protected''
If I right click the files, this is the info I get -
Image
624x352 Pixels
Audio
142kbps
MPEG Layer 3
Video
23 Frames Per Second
1117kbps
Am I missing some form of codec for this particular AVI ?
When I puschase the Diamond video capture device, it came with Ulead VideoStudio 10 SE. This program would not work in Windows 7
I tried to uninstall it, but I guess I did not do it correctly. A file is still running. It has to do with Windows color sheme.
After starting computer up, a window appears saying something like Windows color sheme has been changed to 7 basic. Because (and I can't recall all the words, but it has to do with a Ulead file still running)
I would like to completely remove any Ulead files still occupying space in the computer. If I knew where the file might recide I could go into the registry and delete it.
when trying to download movie from Sony camcorder everything appears fine until Video Studio program stops camcorder on its own and displays unknown error. This sometimes happens after 30, 40 even 50 minutes, but I have yet to be able to download entire 60 minute tape to computer. I am trying to convert Digital 8 movies to DVD.
View 4 Replies View RelatedCan not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
I can't seem to get my audio on my home videos to transfer with the video.
View 8 Replies View RelatedMY version of Ulead VideoStudio 11.5 crashed and upon rebooting I noticed that the Attributes tool has completely disappeared. I had this problem once before and I found a post online that cured the problem, unchecking a box somewhere resolved it....but I cant find or remember what to do..
View 6 Replies View RelatedAccording to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 Replies View RelatedI copied the files over. I opened Ulead and tried to open the project I was working on. So it wanted me to Relink, which I did. But I got the error message: File format mismatch [16803:1:2] I checked the Smart Proxy.So I copied the files back to the old computer. I can open up the project with no problems.
View 7 Replies View RelatedI have installed X6 and it runs fine. However the option: save as still image is not available any longer. How I can make an image from my video clip?
View 2 Replies View RelatedJust skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
I was surprised at not finding any questions about this on the forum. Is their a way to create a mirror image of a video clip?
I am running Videostudio Pro X4 Ultimate 14.2.0.23 (Ultimate)
Using X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.
But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.
When I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedI have VS11+ and I want to save a frame of my project as a still image. The project and footage is
PAL (25 fps)
Microsoft AVI files
24 bits, 720 x 576, 16:9, 25 fps
Lower Field First
DV Video Encoder -- type 1
DV Audio -- PAL, 48.000 kHz, 16 Bit, Stereo
I have clicked on Save as Still Image and the frame appears in the Image folder, although it is square looking with a black border all round. If I put it in the timeline I can make it into 16:9 like the rest of the footage. But where is the image actually saved so that I can use it in other media? How can I decide whether to save it as JPEG or whatever? And why is it in a black box and quite square if it was shot in, and the project is, 16:9? Can I save it as a 16:9 image?
I just downloaded the videostudio X6 trial version. For some reasons, some sequences from mpg clips I added to my project seems to be repeating itself for no reason. The bug occurs within a unique sequence and might change the "restart" position while the timeline cursor.
Ex: Original video = Cow cross the road, a car hit the cow then the car explode and finaly a generic
After importing the original video = Cow cross the road, a car hit the cow then the car explode, then the car hit the cow a second time
If I move the cursor right to left a couple of time, it might end up missing the first part of the clip where the cow is suppose to cross the road (replaced by a second car exploding)
It's a single clip and the final display is changing even if I don'T touch anything. I use to be a Ulead video studio user and I never had such problem.
I've been doing a project using two different cameras, I've done some of it and saved as a .mpg without a problem.Now for some reason I cannot use the split clip tool it is greyed out all the time no mater how I have the clip in the timeline be it set to clip or project.
I made one cut to align two clips now nothing..As I say I've completed three parts of the project without a problem using the split clip tool.
Working with a 1080p/60fps mp4 file from my GoPro 3. Trying to save a trimmed clip using "same as first video clip" option. Everything seems to work fine but the saved clip plays for a second and then the video freezes but the audio continues. This happens playing the clip with WMP and VSx6. The original untrimmed mp4 plays fine.
View 14 Replies View RelatedHow can I make a white colour clip the same shade as the white vignette filter.I want to place overlayed images with a vignette onto a white clip on the main video track so that they blend seemlessly in X5.
View 12 Replies View Relatedcertainly the topic has already been covered but with the hundreds of responses I struggle to find it, then propose it a new:
how do I put in the time line already been settled for good, a video clip so that the whole time line moves?
Note: I added the other video clips in many 4-track, not using the main track, which is empty.So should I insert a video clip that I had forgotten about 20 minutes before the end, so you have to move automatically all the work (including effects, subtitles, etc), so it all coincides, without having to move the whole hand. ...
I've been using Videostudio Pro X4 for a few days now and I've seem to have run into the problem of losing the audio of clips after I have muli-trimmed them. It doesn't matter where I multi-trim them in the timeline, after I have confirmed the trim I lose the audio for the clip?
Let me be clear: the audio for the clips work perfectly before any editing ie. trimming and they are placed in the main video track. The clip formats are mainly AVI, MP4 and DivX AVI and have varying lengths.
How to rotate a clip through 90deg?
View 5 Replies View RelatedHow do I delete both the thumbnail and the clip from my computer ? The Delete in the library only deletes the Thumbnail.
I want to clear the unusable files from my computer.
How can I add multiple titles to the same clip, but enter the clip at different times ..?
I am trying to add a title by having "____ production presents..." (fades out) (fades in) "Title of Movie"
I've been using VS 11.5 Plus for several years with no problem. Recently, I received a new camcorder, a Sony HDR-CX305 which produces .MTS files. I can open the files with VLC and Windows Media Player. For editing in VS, I chose to use proxy files. When I put the files on the timeline and play them in project mode, everything is fine (display & sound). But in clip mode, the clip is played really fast, less than 1 second, which makes difficult the editing.. I tried with smart proxy disabled : same problem.
View 4 Replies View RelatedI am a Video studio PROx4 user. Recently, I had some old 8mm films transferred to video and now I'm editing them in Videostudio prox4.
I have a few clips where I want to add sound; HOwever, when I drag the sound clip to the Voice track or the music track, the clip remains silent. The original clip seems to have a audio track already. I can split the audio and the delete the track from the voice track, and then unmute it and re-submit the music track I want to use but it somehow doesn't do the trick.
I'm able to pan and zoom when I put a still image in the timeline, but when I put a video clip, the option is gone?
How do I do what I want to do if I'm simply trying to pan and zoom in a given video clip?