I was surprised at not finding any questions about this on the forum. Is their a way to create a mirror image of a video clip?
I am running Videostudio Pro X4 Ultimate 14.2.0.23 (Ultimate)
Have VideoStudio X4 Ultimate.I have a major issue here and sure hope this is user error - otherwise it would be a major drawback for me.
How can I move a clip or a picture in a certain way.An example:I want it to move in from the left side small, while going to the middle get bigger, then rotate 180° and continue to move it in the upper right corner.
Using X5 pro, a project comprising an introduction and 6 clips was created, with menu. Each clip has its own sound (voice and music). The rendering config included 2 pass conversion and normalise sound checked, for creation of a disk image on an HDD folder. The preview worked fine - vision and sound OK. Because there were multiple disks to be made, the image creation also worked fine, as did the burn disk from iso.
But when the resulting disk was played back after burning, the first clip on it had no sound. Imagery fine, just no sound. It wasn't an isolated case. A repeat try - with particular care to check this aspect, ie sound on the clip, was OK during preview - got the same result in the final disk.
It is possible with UVS11 Plus to create an effect earthquake?
Something better than what this here:
[URL]
Is there any way to create a 3D image in PSP X4 Ultimate? How about animated gifs?
View 3 Replies View RelatedI recently installed X4 Ultimate which comes with the proDAD Mercolli SE image stabilizer plugin. The problem I'm having is after I apply proDAD to a video clip and burn it to a disc or video file, an error message is displayed over the scene in the clip telling me I need to run proDAD's analysis mode again.
I've tried deleting the video filter by clicking on the X to the right of the filter box. It goes away indicating the proDAD filter was deleted properly. Then I reapply the proDAD plugin filter. The proDAD analysis mode runs OK and the final image stabilized result runs correctly INSIDE the VS editor. BUT when I have VS render an MP2 video file or DVD file with project content that has a clip with the proDAD filter applied, the proDAD error message appears telling me to re-analyze the clip.
I have Photoshop 11.0.2 on CS4/Mac. I'd like to be able to create a mirror image of a photograph for an unusual effect, but I can't find a way to do it. Is this possible?
View 2 Replies View RelatedHow do I create a mirror image of a photo in adobe photo elements 11
View 6 Replies View RelatedI am trying to create a introduction clip to a video. This is just a short written intro describing the contents of the video. Is there a method in VideoStudio X5 Pro that would allow me to do this?
View 3 Replies View RelatedI have been using different versions of Ulead for over 20 years! In the past I was able to save an image in JPEG format on my desktop after saving the clip as an image in the library. Now when I save it to the desktop it only saves it as a "uvs file" which is not recognized by photo editing software
[URL]........
I have installed X6 and it runs fine. However the option: save as still image is not available any longer. How I can make an image from my video clip?
View 2 Replies View RelatedWhen I select a clip, it then goes to the start of the clip, how can I sop this happening and the clip stays in the same position when selected.
View 5 Replies View RelatedIf there are any 3D plugins that will work on Pro x6 Ultimate . I've had a look at the VIDEO COPILOT | Element 3D - 3D Object based Particle Plug-in. It lists a lot of programs it will work with but not Corel.
View 1 Replies View RelatedI recently purchased the x5 ultimate pro edition, but a few years ago i had an older version but i noticed something....
the older version used to have close to 40 transitions, but the new one even with the extra download pack still only 3 transitions.. did something not get installed?
I'm having a real problem with VS X4 pro crashing!Ive just started a project I have a video in the toptrack..I've used a instant project the one selected in yellow all seems fine! I move the text from the instant project & select a Title text effect
Preview it all is well! Now change the text from LOREM to Dublin IPSUM to 2012..Change other text & 9 time out of 10 VS4 crashes when i preview the Project.If i don't use the Title text effect it seems fine!I just reinstalled my OS (windows 7 64bit) it will be somthing Ive missed but ???
How long Corel take to send out disc? Im waiting for a VS5 Pro ultimate? i bought VS4 a couple of weeks before they released VS5 & Corel done a deal!
Since downloading the new version I have ran across a display issue. When editing, all of the popup display boxes are too large and extend under my taskbar. I have tried everything such as changing the monitor's screen resolution to nearing every setting. And I have searched and attempted to come up with a fix from with in the preferences, UI layout, etc.
View 1 Replies View RelatedI have prepared a folder using AVCHD for BLU RAY Disc( that is I am not trying to burn Blue Ray from timeline). When I go in share-create disc-pick blue-ray, the program aborts with message 'Program will abort Contact technical support'. No details on error
The file size is less than 6 GB
I am using WIN 8 have 16 GB of ram, Have Blue Ray burner and Quad Core CPU. I have checked and Burner's firmware is up to date Same for Videostudio 15. It has all the updates and patches installed.
I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.
Is there a cleaning or prep patch for this one?
I am running Vid Studio Pro X4 and am 3 months into a year long project. I was interested in upgrading to Vid Studio X6 Ultimate but wanted to know if X6 will be able to read and properly load the .vsp file for this project which already has many clips, transitions, effects, and audio. Or, should I just stay with X4 until December when my project is finished and then upgrade starting next year's project fresh.
View 2 Replies View RelatedI have done all the updates etc that Corel has suggested and I still cannot make a 3D movie. I do all the steps to make it and when I play it back the audio is there but there is either a white or black screen.
View 5 Replies View RelatedMy new Pro X6 doesn't show me the Smart Sounds. You can't klick something in the smartsound window! I also have installed Pro X4, and here I have all smartsounds!
View 10 Replies View RelatedI have installed the Corel Video Studio Pro X6 Ultimate. I installed the plugins, but they are not showing up in my effects at all.
View 2 Replies View RelatedI've been a Corel Video Studio user for almost 10 years and never ran into this issue. When creating a disc (DVD or Blu Ray), I get an error message while the program is "converting the menues" for burning to blank disc. The message reads "convert step got some problems (257.0.0)". Figuring that something got corrupted, I closed the program and rebooted the computer. I then again set up the menues I wanted to use only to get the same error message. I then decided to burn a previous project that I knew to be successful and it burned properly. I then decided to create a new project using the same video files and menus that previously failed. That too proved to be unsuccessful. I went to Corel's website but there was no info available covering my error message.
View 2 Replies View RelatedI cant find a way to access the filter library, click by click workflow.
View 2 Replies View RelatedI have been playing around with the screen capture fature of X5 Pro Ultimate and I am having problems.
When I set the capture to custom and then drag the frame/window or whatever you call it around the section I want to capture it always captures too high and then cuts off bottom. If I capture in full screen is there a crop feature?
The things I want to capture have a window within the full page and I am trying to capture just the window, ie. a Youtube or any other web based video. the dragghing custom isn't working and I see not crop option.
A project I'm working on needs Speech Bubbles with text in them. I Couldn't find this option anywhere.So I started creating the bubbles in PSP x4 and overlaying them in.This works but its a pain when you need 100 of them.Is there an easier way builtin to VideoStudio X4 Ultimate that I can use.
View 4 Replies View RelatedI just grabbed the upgrade to Ultimate (already had VSX4) because the product page said "Advanced video stabilization and image enhancement - Fix even the shakiest video with proDAD Mercalli SE—rock-steady video stabilization, rolling-shutter correction and zoom/pan optimization. You can also adjust color, white balance, tone, exposure and more with multicore processor-accelerated color correction, Advanced DeNoise, Auto Exposure and Lensflare filters." and I need some of these features.
Now that I installed it, I need to find where they hide everything.
I found the Mercalli filter for the "shake, rattle and roll" stuff but I haven't found the "Auto Exposure" stuff and I need to turn down the exposure of this video I am working on (lots of light flares). From the above description/paragraph, I would have though the exposure stuff was under Mercalli, but I haven't found it.
how proDad wasn't visible. Looking through the X5 install folders, I see a bunch of New Blue filters not visible either. The attached image shows the filters in the vft_plug folder, that aren't available within the program.
View 3 Replies View Relatedafter loading vs x4 picture video music and title templates missing.
View 5 Replies View RelatedIs there a way to re-execute the video analysis of the Mercalli filter without having to actually remove the filter and reapply it to the video clip?
I can't seem to find an easy way without removing the filter.
I am running XP and X5 Ultimate.My workflow follows :
File
Insert media file to library
Insert Digital media
Select drive in import from digital media box
Start
Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.