VideoStudio :: X4 Ultimate - ProDAD Image Stabilizer Plugin Analysis Mode?

Aug 31, 2011

I recently installed X4 Ultimate which comes with the proDAD Mercolli SE image stabilizer plugin. The problem I'm having is after I apply proDAD to a video clip and burn it to a disc or video file, an error message is displayed over the scene in the clip telling me I need to run proDAD's analysis mode again.

I've tried deleting the video filter by clicking on the X to the right of the filter box. It goes away indicating the proDAD filter was deleted properly. Then I reapply the proDAD plugin filter. The proDAD analysis mode runs OK and the final image stabilized result runs correctly INSIDE the VS editor. BUT when I have VS render an MP2 video file or DVD file with project content that has a clip with the proDAD filter applied, the proDAD error message appears telling me to re-analyze the clip.

View 14 Replies


ADVERTISEMENT

VideoStudio :: ProDAD Mercalli Video Analysis Must Be Executed Again

Feb 21, 2012

I am getting this across the screen on every video that I use Mercalli on. Not to mention horrible lock up's and slow operation.I was so fed up last night that I dumped my entire PC and loaded WIN 7 and all its updates and then VSX4.Still I am getting the same behaviour. I run the filter and it goes through its little screen of adjusting the clip based on the settings used.But I still get this warning on the final project even though the analysis WAS run. I was able to get it to work with an upload to Youtube (.flv) but anything to Disc gives the warning.Also found that VSX4 crashes if you try and save to video folders as well as burn the disk.Now that I think about this it all seemed to start after the last Windows updates. I'm running WIN 7 X64 Home Premium

View 4 Replies View Related

VideoStudio :: X5 Ultimate And Mercalli 2.0 Video Analysis?

Jul 12, 2012

Is there a way to re-execute the video analysis of the Mercalli filter without having to actually remove the filter and reapply it to the video clip?

I can't seem to find an easy way without removing the filter.

View 1 Replies View Related

VideoStudio :: X6 Ultimate Rendering - Mercalli Analysis Must Be Re-run Message

May 2, 2013

I have had this product for about a week and it is fabulous compared to any other video editors I have tested.

There is something odd happening, however. I am using the Mercalli plug-in to stabilize hand-held videos. This works great but the rendered video always has a message overlaid saying the Mercalli analysis must be re-run (even if it has just been done). There IS an exception: render to mpeg4 and everything's fine - stabilization has been applied and no message. If I then take the exact same project (no changes) and render into AVCHD (for example), the output is ruined with the overlay. If I go back into the project again to have a look at what's up re-analysis is NOT called for.

View 11 Replies View Related

VideoStudio :: How To Access Mercalli Plugin In X4 Pro Ultimate

Sep 4, 2011

I've installed all the software and I can use the Boris FX as i can find it in the effects list and drag it on to a clip. However i Can't see Mercalli in the list or find anyway of accessing it from Video Studio

NB I've checked the ProDAD folder that installed and it's only 15mb in size and the .corel folder is empty

View 8 Replies View Related

AutoDesk Smoke :: Autos Stabilizer / Analysis Failed

Dec 8, 2013

i have problem with auto stabilizer,analysis failed.

View 4 Replies View Related

VideoStudio :: ProDAD Mercalli 2.0 - Outputting Interlaced?

Oct 24, 2011

I love the inclusion of ProDAD in Corel X4 Ultimate. Some shots we would have binned have been effectively ressurected!

Only gripe is that we make Pal 50i Blurays and I hate having to render things twice.

So for that reason we normally output at 50i and simply add to Nero and it can very quickly author and burn these files with almost no rendering.

We cannot output at 50i with ProDad Mercalli inserted onto our clips. It will certainly render the timeline but it comes up with a horrible darkened screen over the shot which has had Mercalli added to it. It says that the clip needs to be analysed again. The clips have already been analysed and we have no problems rendering at 25p. Is there a work around for this or our Corel addressing this issue? I know that Mercalli in other video editing software has the ability to manipulate interlaced shots but I thought it wouldn't matter for rendering.

View 5 Replies View Related

VideoStudio :: X4 Ultimate Create Mirror Image Of Clip?

Dec 3, 2011

I was surprised at not finding any questions about this on the forum. Is their a way to create a mirror image of a video clip?

I am running Videostudio Pro X4 Ultimate 14.2.0.23 (Ultimate)

View 2 Replies View Related

Photoshop :: Ultimate Plugin Collection

May 17, 2006

tell me wich is the ultimate plugin collection for CS2?

View 8 Replies View Related

VideoStudio :: Pro X6 Ultimate - 3D Plugins

Aug 5, 2013

If there are any 3D plugins that will work on Pro x6 Ultimate . I've had a look at the VIDEO COPILOT | Element 3D - 3D Object based Particle Plug-in. It lists a lot of programs it will work with but not Corel.

View 1 Replies View Related

VideoStudio :: X5 Ultimate Has Only 3 Transitions?

May 3, 2012

I recently purchased the x5 ultimate pro edition, but a few years ago i had an older version but i noticed something....

the older version used to have close to 40 transitions, but the new one even with the extra download pack still only 3 transitions.. did something not get installed?

View 2 Replies View Related

VideoStudio :: X4 Pro Ultimate Crashing

Apr 25, 2012

I'm having a real problem with VS X4 pro crashing!Ive just started a project I have a video in the toptrack..I've used a instant project the one selected in yellow all seems fine! I move the text from the instant project & select a Title text effect

Preview it all is well! Now change the text from LOREM to Dublin IPSUM to 2012..Change other text & 9 time out of 10 VS4 crashes when i preview the Project.If i don't use the Title text effect it seems fine!I just reinstalled my OS (windows 7 64bit) it will be somthing Ive missed but ???

How long Corel take to send out disc? Im waiting for a VS5 Pro ultimate? i bought VS4 a couple of weeks before they released VS5 & Corel done a deal!

View 3 Replies View Related

VideoStudio :: Ultimate X6 Display

Mar 11, 2013

Since downloading the new version I have ran across a display issue. When editing, all of the popup display boxes are too large and extend under my taskbar. I have tried everything such as changing the monitor's screen resolution to nearing every setting. And I have searched and attempted to come up with a fix from with in the preferences, UI layout, etc.

View 1 Replies View Related

VideoStudio :: While Blu-ray Is Selected - X5 Ultimate Aborts

May 25, 2013

I have prepared a folder using AVCHD for BLU RAY Disc( that is I am not trying to burn Blue Ray from timeline). When I go in share-create disc-pick blue-ray, the program aborts with message 'Program will abort Contact technical support'. No details on error

The file size is less than 6 GB

I am using WIN 8 have 16 GB of ram, Have Blue Ray burner and Quad Core CPU. I have checked and Burner's firmware is up to date Same for Videostudio 15. It has all the updates and patches installed.

View 3 Replies View Related

VideoStudio :: X4 Ultimate Installation Stops?

Apr 1, 2011

I've tried installing the purchased downloaded version of the software to two different Windows 7 64 machines and installation just stops on the first screen. "Next" never becomes active. Corel told me to delete my temp files and I've done that, to no avail. I had the same thing happen with the trial version and just figured that they would have fixed the for sale version.

Is there a cleaning or prep patch for this one?

View 5 Replies View Related

VideoStudio :: X6 Ultimate Backward Compatible With X4?

Mar 13, 2013

I am running Vid Studio Pro X4 and am 3 months into a year long project. I was interested in upgrading to Vid Studio X6 Ultimate but wanted to know if X6 will be able to read and properly load the .vsp file for this project which already has many clips, transitions, effects, and audio. Or, should I just stay with X4 until December when my project is finished and then upgrade starting next year's project fresh.

View 2 Replies View Related

VideoStudio :: Can't Make 3D Movies With X4 Ultimate

Feb 13, 2012

I have done all the updates etc that Corel has suggested and I still cannot make a 3D movie. I do all the steps to make it and when I play it back the audio is there but there is either a white or black screen.

View 5 Replies View Related

VideoStudio :: X6 Ultimate - No Smart Sounds?

Mar 20, 2013

My new Pro X6 doesn't show me the Smart Sounds. You can't klick something in the smartsound window! I also have installed Pro X4, and here I have all smartsounds!

View 10 Replies View Related

VideoStudio :: X6 Ultimate - Plugins Not Showing

May 3, 2013

I have installed the Corel Video Studio Pro X6 Ultimate. I installed the plugins, but they are not showing up in my effects at all.

View 2 Replies View Related

VideoStudio :: Pro 5 Ultimate Error Message 257.0.0

Mar 18, 2013

I've been a Corel Video Studio user for almost 10 years and never ran into this issue. When creating a disc (DVD or Blu Ray), I get an error message while the program is "converting the menues" for burning to blank disc. The message reads "convert step got some problems (257.0.0)". Figuring that something got corrupted, I closed the program and rebooted the computer. I then again set up the menues I wanted to use only to get the same error message. I then decided to burn a previous project that I knew to be successful and it burned properly. I then decided to create a new project using the same video files and menus that previously failed. That too proved to be unsuccessful. I went to Corel's website but there was no info available covering my error message.

View 2 Replies View Related

VideoStudio :: How To Access X5 Pro Ultimate Filters

Apr 9, 2012

I cant find a way to access the filter library, click by click workflow.

View 2 Replies View Related

VideoStudio :: Screen Capture In X5 Pro Ultimate?

Apr 7, 2012

I have been playing around with the screen capture fature of X5 Pro Ultimate and I am having problems.

When I set the capture to custom and then drag the frame/window or whatever you call it around the section I want to capture it always captures too high and then cuts off bottom. If I capture in full screen is there a crop feature?

The things I want to capture have a window within the full page and I am trying to capture just the window, ie. a Youtube or any other web based video. the dragghing custom isn't working and I see not crop option.

View 14 Replies View Related

VideoStudio :: Speech Bubbles In X4 Ultimate

Oct 3, 2011

A project I'm working on needs Speech Bubbles with text in them. I Couldn't find this option anywhere.So I started creating the bubbles in PSP x4 and overlaying them in.This works but its a pain when you need 100 of them.Is there an easier way builtin to VideoStudio X4 Ultimate that I can use.

View 4 Replies View Related

VideoStudio :: X4 Ultimate And Exposure Adjustments

Dec 13, 2011

I just grabbed the upgrade to Ultimate (already had VSX4) because the product page said "Advanced video stabilization and image enhancement - Fix even the shakiest video with proDAD Mercalli SE—rock-steady video stabilization, rolling-shutter correction and zoom/pan optimization. You can also adjust color, white balance, tone, exposure and more with multicore processor-accelerated color correction, Advanced DeNoise, Auto Exposure and Lensflare filters." and I need some of these features.

Now that I installed it, I need to find where they hide everything.

I found the Mercalli filter for the "shake, rattle and roll" stuff but I haven't found the "Auto Exposure" stuff and I need to turn down the exposure of this video I am working on (lots of light flares). From the above description/paragraph, I would have though the exposure stuff was under Mercalli, but I haven't found it.

View 6 Replies View Related

VideoStudio :: New Blue Not Visible In Pro X5 Ultimate?

Dec 6, 2012

how proDad wasn't visible. Looking through the X5 install folders, I see a bunch of New Blue filters not visible either. The attached image shows the filters in the vft_plug folder, that aren't available within the program.

View 3 Replies View Related

VideoStudio :: X4 Pro Ultimate Missing Content

May 11, 2012

after loading vs x4 picture video music and title templates missing.

View 5 Replies View Related

VideoStudio :: Ultimate 11 Plus To Create Effect (earthquake)?

Sep 25, 2007

It is possible with UVS11 Plus to create an effect earthquake?

Something better than what this here:

[URL]

View 4 Replies View Related

VideoStudio :: X5 Ultimate Causing Crash On DVD Import

May 5, 2013

I am running XP and X5 Ultimate.My workflow follows :

File
Insert media file to library
Insert Digital media
Select drive in import from digital media box
Start

Then the screen goes black and the PC reboots with an error report box showing. The DVD has a UDF file system and it is 2.32GB and plays in Power DVD OK.

View 2 Replies View Related

VideoStudio :: X4 Ultimate - Move Clip Or Picture In Certain Way?

Sep 22, 2011

Have VideoStudio X4 Ultimate.I have a major issue here and sure hope this is user error - otherwise it would be a major drawback for me.

How can I move a clip or a picture in a certain way.An example:I want it to move in from the left side small, while going to the middle get bigger, then rotate 180° and continue to move it in the upper right corner.

View 3 Replies View Related

VideoStudio :: Can't Open Downloaded Videos With Pro X5 Ultimate

Jun 28, 2012

Since installing Video Studio Pro X5 and keeping my previous version (V.S .11+) installed as well,I am unable to open downloaded videos with X5.It is not available as an option even when I browse for it.I have to open it with VS11+ and then import it into X5.

View 14 Replies View Related

VideoStudio :: Disappearing Custom Templates X5 Ultimate?

Oct 1, 2012

My Instant Project Custom Templates have disappeared from the edit screen, if I click on browse, then select C:ProgramDataDownloadsTemplates, they are all there, when I try to open them it says they are already installed, yet they are not showing. They were there, but disappeared when I downloaded another 2 custom templates,these 2 are now the only ones that show in custom view. how to get them back

Oops, just noticed that my profile is incorrect, using win 7 Home edition, not XP, now just have to remember how to change my profile

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved