VideoStudio :: Cannot Seem To Get ULEAD 10 SE To Work
Dec 30, 2011
I bought a SABRENT USB-AVCPT video capture device that came bundled with ULEAD Video Studio 10 SE, and after loading the Windows 7 install kit, loaded it and have been pulling my hair out ever since.
Computer: Sony VIAO 64 bit, 3.4ghz dual core, 4GB main memory.
(1) Audio Input keeps constantly switching back to Microphone, even though the video stays on the USB Capture device. If I do ANYTHING, like stop a capture to double-check the captured file by playing it back, the display will still show the USB Audio but the capture is coming from the microphone. (It's rather frustrating to have 93 minutes of very fine video but 93 minutes of the gardener and the lawnmower, breakfast conversation, etc.)
(2) Attempts to change the Video Capture to 720x480, rather than the default 640x480, will quite often result in crashes, or in "Illegal function" error messages that cause AppCrash, or, if the app doesn't crash, it switches the sound back to Microphone and drops the video back to default.
(3) I cannot get it to let me capture any COMPRESSED video formats. So a 90 minute video ends up in a 105GB AVI file. (Previous discussion in here, with Ken Barry, if my memory (not on the video card!) is working right, indicated that this humongous file size might be the problem. But if I can't get it to capture something and compress it...) None of the other capture formats seem to work without Illegal Function, Illegal Function, and an AppCrash.
View 1 Replies
ADVERTISEMENT
Mar 31, 2011
When I try to create a WMV HD 1280x720 file, VSX2 tries to use this:
Windows Media Video
24 bits, 208 x 160, 20 fps
Frame-based
22.050 KHz, 16 bits, Stereo
Windows Media Video 8 for Color Pocket PCs (225 Kbps)
When I try to create a CUSTOM profile, only WMV 8 profiles are shown. No WMV 9 or Ulead profiles.
Checking my C:, WMV 9 profiles are all present here: C:Program Files (x86)Windows Media ComponentsEncoderProfile
I've installed the latest versions of WMV 9. Still no luck.
VideoStudio Pro X2
Windows 7
AMD Phenom II X6 2.6 Ghz
6 Gig Ram
View 7 Replies
View Related
Mar 14, 2012
I'm running Ulead Video Studio 11, and I have AVI files I have downloaded from the internet. When I try to import them into Ulead I get the following message - ''(FILENAME) is not accessible'' followed by ''These files cannot be added to this project. These files may be of unknown file format, the computer does not have enough memory or the file is copyright protected''
If I right click the files, this is the info I get -
Image
624x352 Pixels
Audio
142kbps
MPEG Layer 3
Video
23 Frames Per Second
1117kbps
Am I missing some form of codec for this particular AVI ?
View 14 Replies
View Related
May 14, 2011
When I puschase the Diamond video capture device, it came with Ulead VideoStudio 10 SE. This program would not work in Windows 7
I tried to uninstall it, but I guess I did not do it correctly. A file is still running. It has to do with Windows color sheme.
After starting computer up, a window appears saying something like Windows color sheme has been changed to 7 basic. Because (and I can't recall all the words, but it has to do with a Ulead file still running)
I would like to completely remove any Ulead files still occupying space in the computer. If I knew where the file might recide I could go into the registry and delete it.
View 2 Replies
View Related
Feb 13, 2012
when trying to download movie from Sony camcorder everything appears fine until Video Studio program stops camcorder on its own and displays unknown error. This sometimes happens after 30, 40 even 50 minutes, but I have yet to be able to download entire 60 minute tape to computer. I am trying to convert Digital 8 movies to DVD.
View 4 Replies
View Related
Sep 19, 2008
Can not preview audio of any kind. Audio works AFTER rendering, but not in VS11.5. HAve uninstalled and reinstalled software to no avail. I assume a codec issue, but don't want to install the wrong codec pack.
Ulead Videostudio Version: 11.5.0157.1 Plus
Op System: Windows Vista Premium Home
View 5 Replies
View Related
Sep 29, 2011
I have been using different versions of Ulead for over 20 years! In the past I was able to save an image in JPEG format on my desktop after saving the clip as an image in the library. Now when I save it to the desktop it only saves it as a "uvs file" which is not recognized by photo editing software
[URL]........
View 3 Replies
View Related
Nov 20, 2011
I can't seem to get my audio on my home videos to transfer with the video.
View 8 Replies
View Related
Mar 11, 2012
MY version of Ulead VideoStudio 11.5 crashed and upon rebooting I noticed that the Attributes tool has completely disappeared. I had this problem once before and I found a post online that cured the problem, unchecking a box somewhere resolved it....but I cant find or remember what to do..
View 6 Replies
View Related
Jan 6, 2013
According to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 Replies
View Related
Aug 24, 2010
I copied the files over. I opened Ulead and tried to open the project I was working on. So it wanted me to Relink, which I did. But I got the error message: File format mismatch [16803:1:2] I checked the Smart Proxy.So I copied the files back to the old computer. I can open up the project with no problems.
View 7 Replies
View Related
Oct 29, 2010
Just skip from Ulead Media Studio Pro 8 to full version of VS Pro X3. Of course my first question is: Is possible transfer my unfinished projects to VS? And how?
Second: After capture my DV tape from Panasonic 400 to Hard Drive (with default setup and 16:9) I discovered that every few seconds video is distorted as well as sound is distorted too. I am sure that original tape is OK.
View 11 Replies
View Related
Jun 15, 2012
I have PSPX2 and run XP Home.
Until recently my Ulead Art Texture worked perfectly.
Now when I go to the Edit area all the pallettes are greyscale.
I've tried uninstalling and reinstalling and cannot get the colours back into the pallettes.
View 4 Replies
View Related
May 6, 2013
I originally thought I would revert to IE 8, I thought it was because I had switched to IE 10. But I did find someone who blamed it on IE 8, so at this point IE is no longer my default browser.Windows 7 Pro 64-bit on my home computer with IE 10. often when I click on a video or a link on a web page, the attached jpeg comes up, the window turns black and I have to use Task Mgr to kill IE. So until I get to the bottom of this FF is my browser.Is it malware or a virus? MSE and Malwarebytes Pro up to date and frequent scans.
View 1 Replies
View Related
Dec 27, 2011
I have a Sony HDR-CX700V and use the highest quality setting (HD 1920x1080 50fps).I am making projects to play on a Dane-Elec So-Smart Media Player which plays Divx files.My current workflow is: -
Import digital media from camcorder.
Edit (add titles, transition effects, etc.).
Share file using "Same as First Video Clip"
Properties: -
[PAL (25 fps)
MPEG files
24 bits, 1920 x 1080, 50 fps
Frame-based
(HDMV-PAL), 16:9
H.264 Video
Video data rate: Variable (Max. 25999 kbps)
Audio data rate: 448 kbps
Dolby Digital Audio, 48 KHz, 3/2(L,C,R,SL,SR)]
Drag file into Divx Plus Converter (HD 1080P).This creates the file to transfer onto the media Player.Is this the best way to work for HD Quality?
View 7 Replies
View Related
Nov 19, 2010
if there are any tutorials using PIP for VS X3. Also have found that some of the FX filters do not work and I was of the understanding that they were included with purchase = such as Ripple and Twist? I sometimes get a message when trying to use one of these FX filters asking me to register - what is that for is it for the newsletter from Blue FX?? I do not want the feature if it is only a trial and then you discover you can't remove it like previously.
View 2 Replies
View Related
Jun 17, 2011
I've used VS for the past 6 or 7 years with various cameras. I would like to continue using it as I've become quite attached to it, but now I am considering upgrading to a very powerful camera by Panasonic. I was going to go with the HVX200a but it uses P2 cards and the DVCPRO HD codec which I know for a fact is not compatible with VS. So the HVX200's out but the AF100 [URL] uses the AVCHD codec which VS supports.
I want to know if VS will take the AF100's video files at 1080p 30 and 1080p 24 given the right computer (I'm getting a desktop specifically for this).
I've done a bit of research on here about VS's compatibility with AVCHD over the years, and I know that by now (x4) it should be very much stable but I just wanted to make sure before I go and make some serious purchases.
View 10 Replies
View Related
Jul 21, 2011
I have loaded the software on my server but wont run. I get the following error details as follows: I have the dump file but not sure what to ddo with it or where to send it. Dont know how to attach it here either.
Problem signature:
Problem Event Name:APPCRASH
Application Name:vstudio.exe
Application Version:13.0.0.0
Application Timestamp:4cef14d7
Fault Module Name:kernel32.dll
Fault Module Version:6.0.6002.18449
Fault Module Timestamp:4da47967
[code]....
View 1 Replies
View Related
Sep 20, 2011
I have been using Video Studio Pro 4 and was always able to insert, play and record to dvd the MOV file format. All of a sudden I am getting an VS 4 will not let me add Mov files to the time line.
View 4 Replies
View Related
Jan 2, 2012
I shot some video's with my HD-camcorder (Samsung HMX-H200) this New Year's Eve, and now I want to put them all together and make a nice video. My problem is that when I try to preview/edit the 1080p HD video's the preview screen just goes black, and there is no sound either. But when I put the entire unedited clip into my project it WILL play, but then I cant really edit anything. I also used another camera that shoots in 720p, and those video's play and can be edited perfectly The version that I am currently using is 14.0.0.342, and it says that there are no new updates.
View 6 Replies
View Related
Apr 8, 2011
I have used a pc from the 1980s and never bothered much about formally backing up relying on saving to disk for important piccies etc. I have had several computer crashes over the years and merely reinstalled all. My problem is now this: I have recently taken on the job of official film-maker for a local club and so feel I should have some formal backup in place, for fear of losing my project file mid-stream before completion! backup prog particularly for Video work? I believe the opposition incorporate a back up prog into their software but I don't want to move away from Corel.
View 5 Replies
View Related
May 23, 2013
When I am done working on a project for the day if I save it (save or save as) the next time I open the Vsp file, it is all in the main timeline. Can't edit titles, transitions or anything. Basically, it is like flattening an image. Using VS Pro 5 Ultimate.
View 8 Replies
View Related
May 5, 2010
I am at my wit's end here! U completely reinstalled Windows 7 Ultimate (64 bit) and fully updated my drivers, software, and directx. I Installed VSX3 and I cannot render my AVCHD files from my Sony SR11. I get a dump error that points to the AVCHD dll file. I have used that last 5 versions of VS and my AVCHD files were fine with 11 and 12.
Are there users on here that are successful with Sony AVCHD files on Windows 7?
View 14 Replies
View Related
Sep 1, 2012
I added in the VideoStudio one soundtrack and few video clips but the problem is that when I play project I can see only video clips without soundtrack or hear soundtrack without seeing video clips. What should I do to get soundtrack and video clips together played?
View 7 Replies
View Related
Sep 22, 2012
I'm currently using Pro X4.
I would like to know how to use a Transition without it affecting all tracks above it?
For example, if you apply a crossfade transition to a title track to make it fade-in, it will also affect the video track(s) above. The videotrack will suddenly turn black and then fade in together with the title.
Actually it will affect every track above the transition effect. So if you use for example the 'Switch Off' transition on the 2nd title track, it will also switch off the 1st title track, any possible overlay tracks and the main video track.
I can't imagine this should be happening. Is it a bug on my computer or is it a software issue
View 7 Replies
View Related
Dec 20, 2012
X5 Pro Ultimate
Default colour duration 6
Default transition effect 4
Jpeg images in overlay tracks (3 or 4)
As part of a slideshow I have applied transitions inbetween the colour clips but they are only working in the video track colours and not the images in the overlay tracks that are on top of the colours tracks.Is there any way of getting the overlays to transition too?
View 5 Replies
View Related
Apr 22, 2013
quick and convenient way to keep projects in step between computers, e.g. doing some work on a laptop and then bringing that back to a main PC for further editing, then back to laptop, etc.? Is exporting as a Smart Package the way to go? Are there any alternatives such as keeping a consistent folder structure on both machines so that all media paths are the same and just syncing the differences?
View 5 Replies
View Related
May 31, 2011
I bought VSX4 about a month ago and run it on a Windows 7 computer.I have been working on a project that has several audio tracks.
When I burn a DVD directly from the project, the audio gain adjustments do not work right so there are volume problems on the DVD. It gets louder or softer as it plays ... unlike the project when played.
When the project is saved as an mpeg file, the audio goes out of synch. The gain is no longer a problem but the sound starts out fine but gets progressively more and more out or synch as the DVD plays.
As I looked through the forum , I noticed that someone else has a similar issue with a different version. It was suggested to get a patch download,Is there such a patch for VSX4?
View 2 Replies
View Related
Sep 15, 2013
My problem is that NewBlueTitlerEx stopped to work after graphic driver (catalyst bundle) update to the newest stable certificated version. Before it worked fine now this error appear (not enough GPU power). I work on standard "box" PC, so no power management issue here, I reinstalled the program and checked DX, even got the latest 4.5 Microsoft framework net. I have got other NewBlue Essentials that work fine. Is there a newer version of that Titler (recognizing correctly newer graphic drivers), or maybe some modifications in Windows registry to bypass WRONG GPU recognition?
View 7 Replies
View Related
Dec 3, 2012
I bought a new computer (Dell E5520 laptop with Windows 7) and transfered all my programs/data; Video Studio Pro X4 wouldn't work - would not capture video. I un-installed the program. When I try to install VS ProX4 on my new computer from the disc I get a small blank window and a flashing diaglogue box pops up so quickly I can't read it. I have run virus scans and removed all identified threats. I am running a Intel Core i5, have 4GB Ram and 500GB disk. Installation and operations were great on my old system running XP.
View 2 Replies
View Related
Dec 1, 2012
Do these NewBlue FX Plugins work in C VS5? I was trying to install the free Cartoonr plugin but I do not see it after install.Perhaps it's in the wrong folder, or the plugin is not compatible with VS5?Also was considering purchasing the following. Are they compatible with VS5?
Video Essentials IV
Video Essentials VI
View 5 Replies
View Related
