quick and convenient way to keep projects in step between computers, e.g. doing some work on a laptop and then bringing that back to a main PC for further editing, then back to laptop, etc.? Is exporting as a Smart Package the way to go? Are there any alternatives such as keeping a consistent folder structure on both machines so that all media paths are the same and just syncing the differences?
View 5 RepliesIs it possible to sync the catalogs for lightroom 5 between two computers?
View 2 Replies View RelatedHow can I connect two computers in sync with the Autodesk 360? So when you change the properties of an item element in one computer to another feature of the modified element synchronized.
View 1 Replies View RelatedI don't understand Lightroom.
For example, I use LR4.2 on a desktop and on a laptop. Both computers (Windows 7 64bit) access the same image folders. On my laptop in a folder I have 42 master images and 5 virtual (soft proofs) images for a total of 47 images. But when I open LR4.2 on the desktop I don't see the 5 virtual (soft proofs) on the 42 master images.
Why can't I see the 5 virtual proofs since I am accessing the exact folder and how can I see the virtual proofs created on the laptop at the desktop.
When creating movies from video taken I add both background music, narration and sometimes sound effects.
When using background music in particular I prefer to reduce the volume during narration so that the narration can easily be heard. I have been doing that using the 'rubber band' by trial and error - I reduce the volume by 'pulling' the 'rubber band' down a little and then preview that section of the video to check if the volume level is correct/to my satisfaction. I note that during the process of adjusting sound level with the 'rubber band' that there is a sound level 'meter' (in decibels) but I don't seem to be able to use it. Is this (adjusting the sound level in decibels) the method I should be using and if so how is it used?
What is the best method to use when adjusting sound levels in the middle of a sound 'clip'?
PS CS3 Extended suddenly stopped working tonight on my two macs. PS starts up, then a blank white box appears and nothing happens. Have to force quit to exit PS. Happens on 24-inch iMac running OS 10.5.8 and a MacBook Air running OS 10.7.2. I reinstalled software, repaired permissions, nothing changes.
View 2 Replies View RelatedThis is in reference to the DGNPURGE command for Civil 3D 2014 that can be installed from this hotfix:[URL]
I have already installed Service pack 1 for Civil 3D 2014.
I installed this hotfix on 16 computers in my office. So far the command runs successfully on only 4 computers.
Everyone in my company uses Windows 7 64-bit on computers that are identical. Once the hotfix is installed it doesn't work for everyone. It will run, but it returns this error:
"Unable to erase stroke (AcDbZombieObject): eNotAllowedForThisProxy"
That error is displayed thousands of times, I assume once for each unreferenced stroke. The at the end it says this:
"Purged 0 unreferenced complex linetype records (of 0). Purged 0 unreferenced strokes (of 19970)."
For only a few people, when they run DGNPURGE on the same exact drawing and it purges the unreferenced strokes just fine. It then says:
"Purged 0 unreferenced complex linetype records (of 0) Purged 19969 unreferenced strokes (of 19970)"
Each installation of Civil 3D was performed in exactly the same way from a deployment by one of our IT staff members. In addition, we already tried uninstalling Civil 3D and reinstalling it on one of the computers and it still doesn't work.
At the suggestion of Autodesk support I tried starting one of the computers in diagnostic mode and that didn't work either.I made sure to use the files in the px64 folder. In addition, I did try the files in the px86 folder just to see if they would work and they do not.Also, I have installed the Civil 3D 2012 hotfix for everyone and it works fine for everyone including those who the C3D 2014 hotfix doesn't work.
I have to use a newer computer to work on some old VSP files from previous computer.
View 1 Replies View Relatedclarify if I am allowed to install X5 pro on 2 computers? Like I did with X4 en versions before? I noted that X5 ask registration to use the Core Guide, Do More, Get More, etc feature. What will happen in the case of a Windows re-installation - do I need to register again?
View 2 Replies View Relatedtrying to get pressure to work either the stroke is way out of sync with my pen tip, or I can't draw at all (brush, airbrush, pencil, etc)
View 1 Replies View Relatedalbum synchronisation with iPad 2 via iTunes does not work correctly. If I create a new album in PS, it won`t show in the iPad.
View 1 Replies View RelatedI have my settings in my PC, like PGP shortcuts, user preferences, etc. When I logged in another machine, which is a clean install btw, I expect that my other machine's settings will come here. But it is the opposite. My original machine gets default shortcuts, etc.
View 4 Replies View RelatedI am attempting to transfer old VHF video to DVD. Using Hauppauge win Tv capture I achieve a surprisingly good quality sound and vision when capturing and all appears well. But! when I play back the VSP, after approx 2 seconds the sound starts going out of sync and progressively gets further and further out of sync, at worst approx 1 min separation. I hoped that after rendering this would correct itself, but no. I am using UVS 1.
View 9 Replies View RelatedI have a music project with H.264 Video files. The files are all from the same camera and are the same.After burning a BluRay folder on a NTFS external hard disc the first song (is the first from the original video files) is going out of sync. The rest of the Blu Ray is in sync.Watching the first file separtely (KMPlayer and panasonic blyray player) everything is ok.Watching the project in Video Studio before burning everything is ok.
To prevent the out of sync I have made a "smart-proxy file" of the first file, before burning. But sadly no differences. (any need to make a smart-proxy file of all files??)
But not exactly, and after taken some actions I still got out of sync. It has something to do with the BluRay burning but I can not find the cause of it.
Background info:
Editing Program
VIdeo Studio Pro X5
characteristics original video files
Video type: H.264 Video
characteristics: 24 bits, 1280x720 16:9
framespeed: 25000 frame/sec
variable bitspeed (max16568 kbps)
Audio type: Dolby DIgital Audio
48000HZ
Low: no
Bitspeed: 192 kbps
Project characteristics
PAL (25 fps)
MPEG bestanden
24 bits, 720 x 576, 25 fps
Bovenste veld eerst
(DVD-PAL), 16:9
Gegevenssnelheid video: Variabel (Max. 8000 kbps)
LPCM Audio, 48000 Hz, Stereo
I've edited together some PAL SD video clips, that I copied and pasted from my Sony DCR-SX53ES camcorder, and auto-generated music and when I preview the project through the edit screen everything is okay. I then selected Create Video File and DVD and the output file completed successfully, however, when I play back the file both the original audio from the video clips and the added music are out of sync with the video pictures by about 4 seconds.
This did not happen the previous time I used X4 with the same camcorder and on the same PC, how to correct it.
I just downloaded the VideoStudio X5 Trial, and want to crop a 10-minute video of my baby to the minute she's singing. Her grandparents would love it.
I noticed that when I imported the video into the timeline, the audio was about 0.75s ahead of the video, when in "Project" mode. In "Clip" mode it looked/sounded fine. When I render the video, it also has the same sync problem as in "Project" mode.
Here are the details of the video:
Video type: H.264 Baseline Profile Video
Total frames: 18,430
Attributes: 24 bits, 1280 x 720
Frame rate: 29.908 frames/sec
Data rate: 11965 Kbps
Audio type: MPEG AAC Audio
Total samples: 29,736,960
Attributes: 48000Hz, 16 bit, stereo
Bit rate: 96 Kbps
I'm trying to create a music video in the latest trial of X5 (with SP1 and latest QT) with not much luck as the audio/video sync keeps changing.
I've imported all my .MOV files into a project library, files ranging from 50mb to 1gb in size.
Clip properties are:
Video Track 1:
24bit, 1920x1080
29.970 frame/sec
Sound Track 1:
Compression: 16-bit Little Endian
48K, 16bit, stereo
From the get-go, when I Preview or Clip trim view any video segment, the audio is slightly out of sync. I've confirmed the original clip file is fine.
Since I am trying to sync only the video portion of the clip to a pre-recorded audio file I went ahead and lined up a few video clips with the audio file and it see if it would export in in sync but no such luck. Even after synching my video to my pre-recorded audio, the export is out of synch.
X5 looks like a decent program but if I can't even preview my clips with a good audio synch I think this X5 is tremendously flawed.
I am using Corel Video Studio Pro V4. I am exporting as the following:
- MP4
- 30FPS
- 1280 x 720
- Frame Based
- H.624 MAIN
- 5000 kbps
- AAC
- 44100 Hz
- 256 kbps
- Video is about 25min long
At different parts in the video, the audio begins to be off.
I have a problem with audio in Video Studio 3. When I insert an AVI file into the timeline and edit it, the audio becomes offset with the video. I have tried just inserting the audio but have the same problem.
If I insert the audio file and click on Sound Mixer I can see the waveform of the file. Although I can hear the audio from the start, the first 1 second of the waveform is at zero and the waveform remains 1 second behind the sound.
If I pause the file and click the curser further along then the offset becomes much greater, around 30 seconds.
If I split the clip at say 10 seconds and delete the first 10 seconds then move the remainder to zero on the time scale, the the remaining file seems to have around 30 seconds missing from the start but the waveform shown stays correct.
I have tried with ripple editing turned on and off. Becoming very frustrated when trying to sync four cameras and their audio.
I have used X2 for a couple years, but recently bought a new PC with Windows 7. I finished a project (successfully), then after finding and downloading the Windows 7 patches, I was able to burn the project. However, at some point roughly 5 minutes in, all the audio is ahead of the video by about a half a second, and remains that way for the remainder of the project. Watching the project in X2, it works fine, so it is a burn issue. I tried normalizing audio, but that doesn't work. It just seems like a software glitch.
View 4 Replies View RelatedI purchased (USB-Live 2) to convert VHS tapes to DVD. I initially purchased "Ulead VideoStudio 11" to capture and edit video, but the software wouldn't work. I received the following messages: "cannot start the capture graph" or "cannot capture: copy protected material". I was unable to receive a solution from the Hauppauge tech people or the corel tech people, therefore I purchased the Pinnacle studio 12 software and their Dazzle DVC 100 capture device.
Using the "USB-Live 2" device and Pinnacle Studio 12 as my capture software and Ulead VideoStudio 11 to edit and burn, I successfully converted about 100 VHS tapes to DVD disks. Then the Audio would not sync. What happens is that for about 5 minutes the audio will be out of sync, then something happens and the audio will re-sync and stay in sync until the end of the project. But, with the next tape I try to capture the same problem occurs.When in capture mode I can start capture and let it record for about 5 minutes, then, start the tape in the VCR and the audio will be in sync. I wiped the Hard drive and reloaded Windows XP and all of my programs. I also replaced the sound card, but I still have the same problem. I think the problem is with the Hauppauge USB-Live 2 capture device. If I use the Dazzle DV100 there is no sync problem, just a lot of dropped frames.Also, now when I am capturing the video I have no audio but when I edited the project the audio will be on. When I installed the New Sound Card I disabled the onboard HD Audio and it is still disabled.The following are my computer specs.
Asus P5NSLI motherboard
Intel Core 2 DUO 2.66GHz
3 GB DDR2 800 MHz Ram
Nvidia GeForce GT220
Asus Xonar DG 5.1 Sound Card
Hard Drive: 2- 320 Gb drives
Monitor: eMachines E2024
WinXP SP3
After i import video files - and try to play them in Video Studio - the video is not smooth (i jitters) and the audio is not in sync with the video.When i play the same video file in windows media player they play well. The Videos are in full HD (.m2ts) format.
View 5 Replies View RelatedAm converting a VHS tape to DVD. So captured successfully (albeit with an EzCap device). Produced a fairly good quality AVI file and with no editing at all, used VS x2 to produce my mpeg compatible file.
Details of that file are here:
File Format: PAL DVD
File Size: 4,514,938 KB
Duration: 6056.920 Secs
Video Type: MPEG 2 Video, Lower Field First
Totoal Frames: 151,173 frames
Attributes: 24 bits 720 x 576, 16:9
Frame Rate: 25.000 frame/sec.
Data Rate: Variable (Max 6000 kbps)
Audio Type: Dolby Digital Audio
Total Samples 290.252,160 Samples
Attributes: 48000 Hz, 5.1 Channels
Layer: None
Bit Rate 384 kbps
Started a new project, imported the mpeg into the timeline and proceeded to produce my DVD folders. The only custom setting was to reduce the bitrate to 5,000 to get the whole file onto one DVD.
So far so good. Problem is slight out of sync audio towards the middle to end of the DVD. It gets progressively worse as if the audio is at a slightly different frame rate to the video! I have double checked my settings when burning the DVD folders and they are the same as the mpeg except for the bitrate and I have chosen LPCM Audio 48000 Stereo. I tried first with Dolby but that gave the OOS so thought I would try this new setting but the result was the same.
When I run my project with sound on, those clips shot with a HDV camcorder do not play the sync-sound recorded on them properly. I know that the sound recorded with the clops is perfectly alright as it plays properly when each clip is run individually. when they are run as a part of the whole in the project mode all I get is an unintelligible beating sound. I also have clips in the project that were shot with a DV camcorder and the sync-sound with them plays perfectly alright in any mode. I am unable to find any mention of sync-sound in Corel's user guide and am at a loss of what to do to make the sync-sound play correctly. I haven't attempted to lay my sound-track for the project yet.
View 2 Replies View RelatedI place a live music video clip in the timeline. I add the audio clip from a Zoom H2 to the timeline. I sync it up at the beginning matching the audio from the video clip. When I check it 25 minutes into the project the sync is no longer exact. If I slide the audio clip up two frames it is synced at the 25 minute mark but now it's not exact in the beginning. I need to use both sources of audio.
View 5 Replies View RelatedI have read the thread regarding sound breaking up in ProX3. I have this same problem in ProX3 and ProX2. But all of a sudden I am also experiencing the problem of the video and audio being out of sync in files from my Sony Handycam HDR-CX350 set on Standard. The video files I take using either a Sony or Olympus that I mainly use for still shots work fine.
When I first installed ProX2 and then ProX3 my struggle was with the changes in menus and such as I had been using VS11.5 but the videos themselves worked okay. Now all of a sudden I am experiencing the sound problems. I cannot tie the changes in with any specific Win update as I just don't remember the sequence of events.
At one point I had installed a PowerPoint video converter which gave me a registry error message at the time but the sound problems developed much after that time.
Yesterday I downloaded a trial version from another company thinking perhaps I needed to move on but I believe the out of sync problem is worse with that software than with Corel software.
I am wondering if a setting got changed in how the software manages the video from the handycam but I guess I am not smart enought to see what it might be.
Looking to upgrade my video software. I'm a long time user of Video Studio but my last version was 10. The lip sync was pretty bad then as was the new text menus and support, thus my reason for not upgrading. Same video files rendered with Nero (at the time) had no problems. I remember there being a sticky at the top of the support forum with all the things to do to try to minimize these problems.
View 1 Replies View RelatedI recorded a 37min. mp4 video, with my tablet Asus Infinity, on 720p resolution. The first 10 minutes are ok but the last 20min. are out of sync.
There is any possibility to repair the delay of the sound with Corel Video Studio X5?
I am using VS 10 and I have successfully captured all the video needed for this project (DV format). My project is an interview where I used 2 cameras during the recording session. On one camera I used a microphone and I want to use that audio throughout the project for consistency. At the beginning of the session I recorded a timer from my laptop screen to better sync the video during editing.
I placed one camera video on the video track and the other on the overlay #1 track. I moved the overlay clip so it matched the frame of the timer on the video track. The 2 tracks synched up perfectly. How to cut back and forth from the second camera. I extracted the video track audio to the audio track thinking I could just cut the video track and the overlay track and slide the overlay track up to the video track. But, it won’t let me cut the overlay track. By the way, while not an expert,I am also not a first time user with the software as I have made a number of projects over the years.
I was following the old instructions on the recommended way of working with UVS10+ re DVD creation, i.e. do the work on the project save as a video file then come back into UVS10+ with a new project with nothing in the timeline (old computer Win XP, for burning I have a video editing profile) when ready to go into burn phase. In burn phase did the title, added transitions between the 10 clips, let UVS10+ auto add chapters between clips.
Kept all burn phase properties the same as the original, with smart render (no re-render of compatible MPEG2).
Burnt it on to a DL disc, all seemed hunky dory (but took ages to do the title) until came to play it, and then I found that the sound had gone progressively out of sync on the DVD.
The video files are kept on an external hard drive connected via USB. To be honest the old XP computer does run very slow now, as they all do with time as leeches attach themselves and drain speed and resources.
My question is what are the usual suspects for sync problems ? Data transfer from external hard drive ? Project settings in burn phase different from edit phase ?
Would it be better to create an iso on the internal C-Drive, then burn from the iso ? NB whatever USB port I attach devices to front/rear etc. I have always got the message this device can run faster, searched the net tried all the tips to no avail.
However this did not prevent me from creating single layer DVDs without sync problems in the past using this set-up/way of working, but PC is way slower now.
I guess the PC's effective speed might be in the frame ? How far back will the 'rot' go ?
Should I go as far back as putting the converted clips into the time line in the edit phase (totally new project), or will the VSP project/video files be ok, i.e. problem at data transfer/burn stage.
I'm thinking about re-doing the XP user profile to ensure that later installs have not cluttered all the profiles on the machine, i.e. including the video editing profile.
I am using v X4.I have a video clip that contains audio that I split off into its own audio track, right click split audio. I then edited out a couple parks of the video replacing the cut video with a still image. right click replace video with still image. So far so great, everything plays back perfectly. When I put transitions in where the video meets the photo or when the photo then meets up with the video again the audio gets out of sync. Is there a way to get the transition in there and still have the audio track be in sync with the rest of the video?
V=video T=transition "photo for 4 seconds" is where the photo has bee inserted. A= audio track X=out of sync