With ProX5 I am trying to burn an MPEG4 HD project that is 1 hr 40 minutes long to a dual layer disk. I have a dual layer burner. I got an "unspecified error" on my first try. Should it work ok?
View 14 RepliesI've been having a problem trying to burn a project with three movies onto a DL DVD.
The three mpegs are:
1. 2.88GB (1:05:00)
2. 2.73GB (1:01:47)
3. 2.86GB (1:04:41)
Settings are:
24 bits, 720 x 480, 29.97 fps
Upper Field First
(DVD-NTSC), 4:3
Video data rate: Variable (Max. 8000 kbps)
Audio data rate: 256 kbps
Dolby Digital Audio. 48 KHz, 2/0(L,R)
I realize that I have a red area over the size limit for 8.5GB disk, but I've burned single layer disks with slightly higher size and the program compresses it to fit. But with this dual layer project, the burn process goes up to 97% and freezes. I've also only created and ISO file of the project, but, using ImageBurn, I find that the ISO file doesn't have the proper configuration to split the layers correctly. It tells me: "Optimal L1 Data Zone Start LBA: None Found! (VTS_01) This image has not been mastered correctly for burning onto a double layer (OTP Track Path) disc. None of the cells meet the 'DVD-Video specification' criteria for a potential layer break position."
Is there something I'm supposed to do first? Is there a step or two that I'm missing? Or does VSX2 have a problem burning DL DVDs?
I also realize that VSX2 was not designed for Windows 7, but I figured the ProPatch and Windows 7 updates were supposed to make VSX2 work on Windows 7.
According to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 Replies View RelatedI want to combine two photo's and have a gradual transition. So I move one photo into the other, select layer mask, then gradient, drag left to right, and presto I have a nicely merged photo. However I would also like a gradient from Top to Bottom (and left to right) on the same photo. How do you apply mutliple gradients to the same photo? If I select gradient again, it just overlays the first. I want two or more gradients.
View 5 Replies View RelatedHave created a 42 minute movie that includes the accompaniment track and visuals for musical. I will show the movie via large media projector from the computer VGA out. I'm running 3X in Windows 7.
I am able to access extended desktop, duplicate desktop, etc. via function F4.
I need to be able to PAUSE the video (for live drama) and restart without the controls showing on the big screen. I need to be able to SHOW the movie while viewing the CONTROLS on my monitor display.
Can the "project playback" function be set up to play this way? If not, is there a recommended format I should export to to be able to control the movie this way? Any software recommended to show the movie with a public view and a control view on my monitor?
I have dual role video which i am trying to merge as one. But when i placed one video in the video track and other in the over lay track, i am able to see both clippings in preview. But when i tried to make both videos equally to be shared in the screen, the clips shrinks and the picture quality becomes thin rather i want to reduce or cut the half portion of each clip so that when both half porting of the clip will fit the screen size to show as a single clip to have the dual role scenes perfectly.
View 2 Replies View RelatedProblem after rendering a video file using FFDshow video codec (for AVI compression in Mpeg4 base) and using Mpeg Layer 2 192kbps 48Khz audio for the audio format?
I have been using this tried and true format for years with no issues whatsoever... until recently within the past year or 2 I have been running similar problems with it. I had recently concluded it was due to the Mpeg Layer 1 and 2 audio codecs that DVD Movie Factory 7 install as prior to version 7 I have always had DVD Movie Factory 6 that I have to install in order to get this audio format on the system to use with encoding.
I had completely reset my system up recently... with NOT installing Movie Factory 7 and remaining with version 6 and have had no issues with encoding using VideoStudio Pro X3. However, I had gone ahead and installed the Service Pack 2 update for VideoStudio X3 and seems like since then the problem has resurfaced. Now I am usually left with glitchy audio. My question to the Corel guys... does Service Pack 2 for VideoStudio X3 have any relationship whatsoever to the Mpeg Layer 1 and Layer 2 audio codecs that Movie Factory 7 install? Because if it does, then you seriously have a problem with these newer codecs in the software and you need to revert back to previous versions which work without any problems.
I keep having a problem where I cannot unmount my external hard drives while Photoshop is running. I have them unchecked in the System Preference for "scratch disks", so what else can cause Photoshop to use the external disks? It's a real drag having to quit Photoshop every time I want to move my laptop into another room.
(By the way, the only reason this disk is attached is it contains my music library, so no, I'm not opening files off that disk either.)
I have a problem with Scratch disks in Photoshop CS. I am trying to work with PSB format. Every time I do an operation on a large file (even as small as 1 GB PSB)I get the Scratch Disk dialogue Error- Scratch Disks full. Code:
View 7 Replies View RelatedI have Photoshop CS3 (and Windows Vista) and just recently every time I attempt to crop, it gives me the error message that my scratch disks is full. I went into my Preferences and put my C: drive as my first choice (which is only about 10 percent full) and my D: drive as my second. I have a new HP with the D: drive being the recovery portion of the hard drive. I have gone in and cleaned it out. I have restarted both Photoshop and my computer. I read online that you can clean out all of the temp files but it did not say where to locate them. I have searched for "#pst" files. I also can't find my "Local Settings" (because Vista still confuses me) to find temp folders. The only temp folders, I can find has nothing to do with Photoshop.
View 3 Replies View RelatedI've got a problem with Photoshop CS3.
It says that my scratch disks are full. I had it one time when I started PS, and now when I'm brushing.
so I got the 'scratch disks are full' message when I tried opening new projects. After googling, I read to just change the location to another hard drive instead of the main one, so I went into preferences, unchecked the C drive & checked the E drive. Now photoshop won't let me open it. I get this message:
"Could not open a scratch file because the fil eis locked, you do not have nexassary access permissions, or another program is using the file. Use the 'properties' command in the Windows Explorer to unlock the file." how do I do this, exactly?
I just installed Photoshop 7.0 on my Windows 7 system. When the program first booted I got the message that I should put the scratch disk on a seperate volume. I was not allowed time to do this even if I new how. Now the program will not load. I get the message Scratch Disks Full.
View 6 Replies View RelatedEvery time I click,File ->New, it says, "Can not create a new document because the scratch disks are full." What is a scratch disk and how do I make it empty so that I can create a new document?
View 4 Replies View RelatedI get a message when trying to open up photoshop 6.0 and says scratch disks are full and not enough memoery to initialize MP library.
View 5 Replies View RelatedI have tons of space and ram available on my machine. This error msg occurs when I try to crop. I have gone as far as to reinstall PS [but kept my preferences]. Scratch is set to my c: drive and the default 50%. Any suggestions on what else I might try?
View 5 Replies View RelatedI've been using ps6 program has halted on me and come up with an error telling me my scratch disks are full.
I've got the photshop bible and the adobe book on ps6 but neither explain it very well or give me any clue as to how I should make my scratch disks bigger?
I can not complete any action while in photoshop because the scratch disks are full. I have already run into the Performance Preferences and allowed the program to use the 7.09 GB I have of free space. I am about to throw out the laptop through the windows....
View 16 Replies View Relatedhow do I empty my scratch disks?
I need them empty so I can scan some images...
PS CS3
I am trying to crop a JPG slightly to get a specific size. I have set the size in the toolbar of the crop tool and draw the crop mask, but when I try to complete the crop it says "Cannot complete your request because the scratch disks are full". I have two disks on this machine, one with 26GB free and the other with 77GB free and this is only a 250x970px image. I did several prior crops on the same image among other operations, but wanted to use the exact size on this one since it needs to fit in a rotating banner for a website. I can crop it if I leave out the exact size, but then, of course, I am only guessing at the size.
I try to move a complete folder from my internal to an external disk within LR. The directory will be created, but then it stops and shows "Unknown Error..." When I create the subdirs manually, I can move the single pictures.
View 2 Replies View RelatedSince I have (unfortunately) the Windows 7, Lightroom 3.6 does not want to allow me to import to any other disk but to C: But my fotography is not on the system drive.
As a work around I have a "2 step import" import to C:drag and drop directories after import the new directories into my photography drive. I wish I could stay with the far superior Windows XP, but I cannot. Its business with getting money for updates/upgrades.
I cannot initialize Photoshop 7 because the scratch disks are full.
View 3 Replies View Relatedcould not use brush too because the scratch disks are full
View 1 Replies View RelatedI had a really big file open and suddenly my computer crashes. And now when I select the Startup as scratch disk it always sais the scratch disks are full. Even when I restart PS or my comp, the message stays. So I have to select a different drive.
View 3 Replies View RelatedI am creating an extremely large file to be printed @ over 20 feet long. I've been in touch with the printer who told me that my original file, at 1/4 scale and 100 DPI was not high enough resolution, 1/4 would have to be 400 PPI, which is where I am now.
View 25 Replies View RelatedMy CS6 Photoshop can no longer find scratch disks and won't load... I have reloaded the software but it still won't load and gives me the same error.
View 2 Replies View RelatedI'm working with a fairly large CMYK document, 300dpi 160inches x 38inches. On disk it registers as just under 3.69gigs as a .PSB file, and as 1.53g/18.0g in Photoshop's Document Sizes info panel. I'm using CS6 extended.
I'm at the point where I can barely work with this thing any longer, as nearly any time I attempt to run a filter or make basic transformations, I get the "scratch disks full" error and PS is unable to complete the task. I'm also receiving the same error when attempting to save changes to the file to disk.
The thing is, in my performance preferences I have an external HDD with 330gigs of available space set as the primary hard drive, and am still getting this error. If I switch the primary scratch to a second internal 7200rpm HDD with 60gigs available, I don't have that issue for the first couple of operations, until the PS temporary file baloons to 40+gigs and I start getting the error again, necessitating a restart of Photoshop which of course loses my unsaved changes. I've also tried allocating my two internal SSD drives (Windows 7 and applications) as the 3rd and 4th scratch disks, which doesn't seem to work at all. They both have only around 5gigs free each.
When I try to open Elements it says the Scratch Disks are full. How do I correct this problem?
View 4 Replies View RelatedPremier Pro on a MAC.
Error code:
Scratch disks are write protected or unavailable. To open this project,, the scratch disks will be set to your Documents folder. Would you like to continue?
I have 180 GB of free space on my scratch disk and I try to open 558 MB file, but I still get the "Could not complete your request because the scratch disks are full." -message. I have 8 GB of RAM and no other major programs on. What to do?
View 16 Replies View Related