VideoStudio :: X2 - Blank DVDs Altered And Unusable
Apr 8, 2013
I have been using Video Studio Pro x2 for several years to edit and burn DVDs from the edited material with no problems. But for the last several months the burning process stops at the end of the VOB (whatever that is) but the blank disc is altered so it is unusable. It says that the Corel softwart has encountered a problem and has to close. I send a message every time but nothing comes of it. Another recurring problem is that it keeps telling me that the program will take a long time to burn even though I have checked the box to not show this message again.
The only way I have found to get the software to perform properly is to remove and reinstall the soft ware. Normal operation lasts for about four discs and the problem reoccurs. I have cleaned the hard drive of unnecessary files, etc. All my security updates are current.
I used this software on my previous two computers with no problems at all despite a much smaller Hard Drive, slower motherboard and much less memory.
View 6 Replies
ADVERTISEMENT
Jan 13, 2013
My Video Studio X5 refuses to create DVD's.
The system runs fine apart from that. When I go to Share, Create Disc, DVD, then check Create Disc, Create DVD Folders, Create Disc Image, Normalize Audio, Delete Temporary Files in Working Folder. Then Click Burn, everything proceeds as normal until both progress bars reach 99%, then I get the following message " Unspecified Error -- 5.0.0".
Nothing gets transferred to disc. This is the same for all projects. I have already tried re-installing VS X5. Nothing seems to make any difference.
View 6 Replies
View Related
May 11, 2011
I have a version of VideoStudio Pro X3 that came pre-installed on an HP computer. It tends to crash, but I can muddle thru to the point where I can save a project as a video file. Once that step is done, there is no option, not even a greyed out button, that allows me to burn a DVD. The saved file is there, just can't do anything with it. Been thru the process and the instructions several times, the option to burn disks seems to be missing. Is this some sort of trial version, maybe stripped down? The option to export to portable device is also limited to low res WMV, no MP4, 3g2, etc.
I tried to run an update, but the program comes back stating that no new updates are available.
View 6 Replies
View Related
Jun 27, 2011
I have been using Ulead VS 11+ for some time with great results. I recently upgraded to Corel VideoStudio Pro X3. The video capturing and editing works flawlessly however when I then want to burn the video to DVD by selecting the “share” tab and make disk it seems to start up DVD Factory which I find totally lame compared to the DVD burning associated with SV11. There seems to be no advanced functions accessible, I can’t seem to insert a photo into the back ground of the menu title, I can't create new decorations to create new back grounds for my title, I can’t burn the project to an .iso file etc. etc. In addition if you save the project and then come back to it later it does not pick up you saved project, and it does not indicate where it has saved to project. Am I missing something here. At the moment I edit in SV ProX3 and burn in VS11.
View 6 Replies
View Related
Apr 18, 2012
I am trying to burn multiple copies of a video I have produced. In the final screen to create a disk there is an option to choose multiple copies. I always select multiple copies and it burns the first one perfectly, the burner drawer opens and it asks me to provide another disk. When I do so I get the error: "Does not support burning of DVD-Video on Empty disc. Supports burning on DVD-R/DVD-R DL/DVD-RW/DVD+R DL/DVD+RW disc. Please insert another disc to continue, or click Cancel to stop the process."
The disk burner is a ASUS BW-12D1S-U.
This is quite frustrating as I seem to have to cancel each time and ask it to generate another disc, which I suspect is a longer process then just making multiple copies.
View 3 Replies
View Related
Aug 21, 2011
I have been using corel video studio pro x4 for about 6 months for uploading videos to youtube. Works just fine. I have now edited and composed a 50 minute video that I have tried to burn onto dvd+r and when the finished product is played it starts out just fine and in time. Minute by minute though the audio starts to lag away from the video being displayed to where at the end of my 50 minute dvd it is off by more than 5 seconds.
View 1 Replies
View Related
May 7, 2011
I have one that should hold 8.5 gigs. Not sure if I should try it. I have a 2 hour interview I want to burn and it will not fit on a regular DVD.
I wonder if there is another setting that would reduce the size some without degrading the quality much.
View 3 Replies
View Related
Sep 17, 2013
I'm in a real pickle: Bought a top shelf Sony V. Cam. In HD the format is AVCHD, which X5 Pro doesn't want to know. The Sony software,'Play Memory Home' only allows basic editing like trimming of clips. So I tried 'Batch Convert' and picked MPEG as target to edit my 1 hr 4 mins of Kruger Park wildlife, which entails hours of work. When I start on the disc burning procedure (or video file production) after several mins I get the 'The program encountered an unspecified error and will be closing down',
I have tried different output choices, like 'DVD" or 'AVCHD' at different compression,tried deselecting hard- and software acceleration etc, to no avail, same error every time, I get told to send the Dump file to Corel for analysis, fat lot that would do! If I started with a conversion to a different file system I would probably have to go through the editing again, sound, transitions and all?
View 5 Replies
View Related
May 4, 2011
Does Video Studio Pro X4 allow for the creation of DVDs with switchable sub-titles, ie giving the viewer the option to watch the movie with sub-titles (eg English sub-titles if another language is used in the movie) or without subtitles?
View 2 Replies
View Related
Dec 28, 2011
Since I am unable to burn DVDs with my current computer drive I want to burn them on another computer using the VSProX4 software. Also the video quality of the DVD I burned on this computer is poor. What is the easiest way to burn them on another computer? Should I create DVD folders or create disc image or just copy the files in the Corel VSPro folder on Documents and transfer it to the new computer. I rendered a video file from my project and it is saved in my projects folder in documents.
View 14 Replies
View Related
Jul 1, 2013
How do I put images that have been altered in PS together with my images altered in LR4 to make a slideshow. They are currently sitting in LR in 2files and I simply don't know how to combine them
View 12 Replies
View Related
Dec 29, 2008
Projects do not finish burning to DVD. After I have finished editing my video I try to create disc using DVD format. Project completes video rendering but doesn¡¦t complete writing to disc. It stops half way. Then a message pops up saying ¡§The burner is busy for another application.¡¨ I press ok and another message comes up: ¡§The drive is busy or is being used by other applications. Please make sure the drive is ready, close all applications that may be using the drive (including folder windows), and try again. [534:-2147216300:0]¡¨
Drive: External drive Samsung SE-S204S USB CDDVDW
Video Studio 11 Plus
I have made sure no applications are open and the drive works fine with other software. I have included Print Screen shots of when I encounter the problem.
View 5 Replies
View Related
Feb 15, 2013
I'm using VideoStudio proX5. Previous versions of the VS program have allowed me to opt out of using a preset image template for the menu pages and instead to choose a background image of my own to put behind page headings and video thumbnails or text titles. I can't see how to do this in VSproX5. Any background image I introduce is always partly covered by unwanted areas of template and the right-click menus won't let me delete or move them to the back. I just want a plain uniform background and to be able to choose the coolur.
View 4 Replies
View Related
Jan 6, 2013
According to DVD Decrypter my DVD burner LG's HL-DT-ST DVDRAM GSA-H10N can burn dual layer discs of the type +R (not -R) with a capacity of 8.5 Gb. Is this possible with Ulead VideoStudio 10, or is more modern software required?
View 7 Replies
View Related
Jun 21, 2012
I am trying to transfer 8mm tapes to my computer to make DVD's. I bought a "Startech S-Video / Composite to USB Video Capture Cable w/ TWAIN and Mac® Support" so that I could use any software w/it. I thought I could use Microsoft Movie Maker, but it doesn't work. So, I got VideoStudio Essentials X4 with the capture device. All my tapes are fine, and they play fine with I'm capturing...but when I go to view the video, it's jumpy. I only did a few minutes to see how it would do and that's where I hit a wall. I've emailed with Corel support for almost 2 months to find out that they don't support the software I got. As a last resort, he asked that I download the free version of VideoStudio Pro X4. I did, and still the same thing happens.
View 14 Replies
View Related
Dec 5, 2013
I have been using VS X5 to create DVDs and ISOs from MPEG2 clips that are 30-60 minutes in length, so I end up with one clip per DVD. Now I'm in the process of taking approx. 60 MPEG2 clips, which were originally VHS and VHS-C movies of my kids at various events, and creating 60 minute DVDs and/or ISOs. The MPEG2 clips range in length from 2 to 20 min. When creating the DVDs/ISOs, I want to include the who, where, and when information prior to the video clip. My current thought is to create a timeline in the following format: Title1, Clip1, Title2, Clip2, etc. I would add chapter markers at the start of each title. Once I have approx. 60 minutes on a timeline I would create menus and DVDs/ISOs.
I create a movie file from each MPEG2 that includes content info and use these movie files when creating the DVD/ISO.
View 2 Replies
View Related
Sep 28, 2011
Im editing my home dvds that i have imported to my hard drive, now using VideoStudio x4 to crop them into the right clips and adding text,
So far ive managed after some reading to set the in and out points, drag it to the time line, then add text... I had a bit of trouble finding out how to save it, but i think im right in clicking "3 share" and then "create video file" to save the clip ?
Once ive done this what is the best format to save the clip as? baring in mind once i have all my clips cropped with text at the beginning, im hoping to burn them all to a DVD, and add menus... Is the menus also something that can be done on Video studio?
View 14 Replies
View Related
Feb 1, 2013
I just upgraded to windows 7 and now there is a blank preview window when I try to capture. I have tried capturing in both DV and DVD and no preview. I am capturing via firewire from a VHS. This worked perfectly under windows xp but is not working under 7. It seems that it does capture but I cannot preview in order to find my spot on the tape.
View 6 Replies
View Related
Oct 24, 2012
I am trying out video editing for the first time and I am trying out the VideoStudio Pro X5 Ultimate.
But each time I drag a MOV file from my Phone into the program it doesn't display the video. I can hear the Audio but the picture is blank. I have Re-installed Quicktime but I still get the same problem.
View 2 Replies
View Related
Jan 18, 2011
The activation tool for Video Studio X3 is completely broken. Every button I click, except the "activate later" button does nothing but bring up a blank message box. There is an OK button, but no message. Reinstalling does not fix it.I purchased the download version.
I did not install in the default location, which is impossible on my configuration due to disk space limitations (I only make my "C" drive big enough for Windows. Saves time for the inevitable reformat that comes in the life of a Windows machine). I installed it on a separate drive: F:CorelCorel VideoStudio Pro X3...I am using 64-bit Win7 Ultimate.
View 8 Replies
View Related
Aug 4, 2011
I recently purchased VSP4 and when capturing from Panasonic camera via fire wire, the preview window remains blank but capture is successful. I can preview video on LCD screen of camera but that is all. All the settings seem to be ok. (PAL). However, the options panel is greyed out except for insert to timeline option. Also, the video properties in the options panel are all greyed out. I have a previous version VS3 on another computer which shows the preview window OK on capture. Could this be the integrated video card in my new computer or is there something else going on here?
OS Windows 7 Ultimate 64 bit
MB Intel DH67GD intergrated HD Graphics Dual Display on board sound
CPU Intel Core i5 2500 3.3 GHz
8gb DDR3 Ram
Seagate 3.5 2 TB SATA2 HD
Panasonic NVGS400 for SD
Panasonic FZ100
View 14 Replies
View Related
Jan 22, 2013
I am editing a video and the footage is an HD .mov (30 fps, 24bit 1920x1080 48s in length) file recorded directly from a logitech webcam. The clip plays fine in the Library, but when I add it to the storyboard/timeline the video plays super fast, then goes blank for the duration of the clip.
View 2 Replies
View Related
Dec 2, 2011
Firstly note I am using Videostudio Pro X4.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
View 4 Replies
View Related
Oct 1, 2012
I added a filter to my video but it only lasts for a few frames. There are little marks shown where I added it in the Altered Video section of the timeline. How do I apply a filter or effect to the entire clip?
Also when I ad a filter such as Lens Correction, it only lasts for a few frames..How do I get it to remain?
View 3 Replies
View Related
Jun 8, 2008
So I guess my question is for those of you who are experienced with re-touching or image editing, so here goes I have some images and im trying to tell if they have been edited in as far as being able to know with some degee of certainty if in fact the image has been altered.
I guess Im asking for some tips/hints on what to look for and if there is any tell tale signs of editing that would indicate that yes the image has been altered, now I know that there is no way to restore the images to thier originl content but if I could tell if the images have been edited that would be good enough in this case..
View 9 Replies
View Related
Jan 26, 2013
Once I have altered a photo in PSE 11 how do I get the altered photo back into my "Lightroom 4.3"? I am running Windows 7,
View 2 Replies
View Related
Dec 18, 2012
I've got a 30 second piece of video in which a logo on a wall needs to be erased. I used the patch tool and it did a wonderful job, but only on the first frame of the clip.
View 1 Replies
View Related
Jul 29, 2013
Until last week I had no problems importing, playing or editing Canon 60D RAW or MOV videos in Lightroom 5. Since then, ever time I tried to import MOV videos LR5 crashed and needed to be restared - but is now 'permanently' crashed (see below). I tried the following to overcome the issue, without success: Unistalled and reinstalled LR 5Updated video card driverInstalled QuicktimeOS (Win 8 Pro, 64 bit) up-to-dateUpdated monitor driver. My last attempt to overcome the issue involved disabling all LR5 plug-ins. I then tried to import a video file to see if that fixed the problem. LR5 again crashed, but this time it it appears to have crashed 'permanently' because when I try to reload LR 5 it gets as far as the LR screen, tries to load 'previous import' into 'Library' and then immediately crashes, i.e. I can't get into LR at all to try any other possible 'fixes'. I am now totally locked out of LR 5 because even after uninstalling and reinstalling LR it continues to crash immediately when I try to open it.
Other info that may assist resolving the problem includes: The video files that can't be imported seem OK - I can play them through Windows Media Player and Quicktime.DivX not installed. Installed a new video card (Gigabyte GT610) and installed the latest driver from the Gigabyte website. I don't know if it's coincidental, but the new video card and monitor were installed before the problem arose. CPU is an i5 - 3550, 8Gb RAM (+-5Gb available), LR5 stored on 120Gb SSD with 8.3Gb free, photo/video files stored on a 680Gb HD partition with 55Gb free.
View 4 Replies
View Related
Aug 19, 2012
I recently change the volume of a part thinking that it would change the actually size of it. It didn't effect the size at all and now I don't know what the actual volume of the part is anymore. How do I find out the part's actual volume?
View 3 Replies
View Related
Jul 12, 2012
rendering seems to go extremely slow. is this normal? i gave up a few times after half an hour.
View 2 Replies
View Related
Jan 2, 2013
Everytime I want to use the 3D Mode on Photoshop CS5 Extended, the one option the I need is disabled.
My videocard can handle the graphics. So that is not the problem.The one that I need is "New Shape From Layer". The "New 3D Postcard From Layer" and the "New Mesh From Grayscale" are usable.
View 2 Replies
View Related
