I just upgraded to windows 7 and now there is a blank preview window when I try to capture. I have tried capturing in both DV and DVD and no preview. I am capturing via firewire from a VHS. This worked perfectly under windows xp but is not working under 7. It seems that it does capture but I cannot preview in order to find my spot on the tape.
View 6 RepliesI recently purchased VSP4 and when capturing from Panasonic camera via fire wire, the preview window remains blank but capture is successful. I can preview video on LCD screen of camera but that is all. All the settings seem to be ok. (PAL). However, the options panel is greyed out except for insert to timeline option. Also, the video properties in the options panel are all greyed out. I have a previous version VS3 on another computer which shows the preview window OK on capture. Could this be the integrated video card in my new computer or is there something else going on here?
OS Windows 7 Ultimate 64 bit
MB Intel DH67GD intergrated HD Graphics Dual Display on board sound
CPU Intel Core i5 2500 3.3 GHz
8gb DDR3 Ram
Seagate 3.5 2 TB SATA2 HD
Panasonic NVGS400 for SD
Panasonic FZ100
Firstly note I am using Videostudio Pro X4.
I have noticed many times that when I add the CIRCLE transition between two video clips that when I drag the 'scrubber' along through the two clips and transition, when the scrubber goes past/through the circle transition the preview window goes blank (displays black).
If I change the CIRCLE to any other transition it displays (the transition) correctly but as soon as I put the CIRCLE back it once again only shows BLACK.
If I PLAY the project the CIRCLE transition displays correctly - it is only when dragging the scrubber that the problem exists.
Is there a known problem with the CIRCLE transition?
I've just downloaded VS11 plus TBYB and now I`m trying to make some DVD disk. All is o.k. but i can not see the disc preview.All i see on the black "preview window" is the record "Press "Play" button to start preview" .After i press the button i see the progress bar shortly and nothing more happens.
View 5 Replies View RelatedI have set my video capture format to 16:9 (widescreen). The picture in the movie capture preview window is 4:3 and stretched vertically. However when the file is played it is in fact 16:9.
Is there a way I can set the preview window to display the correct aspect ratio during capture ?
Why do I allways have a 4:3 preview window ? Although the captured movie is of the correct AR, 16:9
View 14 Replies View RelatedI am using VideoStudio Pro X3, and am having a lot of difficulty with the preview window.
When I play the video I have been working on, it runs the video at about 1 frame per second or so, and renders the program useless. The odd thing is, when I select an individual clip and click run, it runs at a proper frame rate.
Is there some sort of codec or driver that I am missing?
I edited the project-properties to HD, according to the hints Trevor gave in this topic:
[URL]
As a work-round----Change the project properties to use 1920 x 1080 and your images will be 1920 x 1080.
Settings-Project Properties (Alt+Enter)
Edit File Format ---Microsoft Avi Files
Edit
Avi Tab
Compression to Microsoft Video 1 (there may be others you can use—Div X ??)
General Tab
Frame Size---User Defined to 1920 x 1080
Ok now the screen shots should all use the larger image size.
I am using VideoStudio Pro X3 and trying to understand some behavior in the program. I have some AVI files which I added to the gallery. If I play the video from the gallery in the preview window, the exposure appears correct. But when I pause the video, the image becomes darker (with more contrast). I've attached 2 image captures which demonstrate. After the video clip is added to the timeline, playing or pausing the clip will also appear darker. After I trim and create a new AVI and watch both in Windows Media Player, the original is brighter and the edited video is darker. What is causing this change to the video's exposure??
View 2 Replies View RelatedWhen I select photos in library or on the video track they go black in preview window... nothing appears. But not all... some don't go black. This happens after working on project for 15-20 minutes. When I first start up computer they all appear in preview when selected. No problem then. Same if I shut down and restart computer. Only after working on project awhile does it happen. Also after some time working I get window saying no memory. I thought with 4 ram I could work for hours before getting any problems like this. I plug in my external WD Passport HD only for backups. And with MacShield filter turned off, still have problem. Could it be the VS Pro X5 software?
View 3 Replies View RelatedI recently got a new pc, installed X3 and transferred my project files and relinked my clips for the current project i'm working on but when I went to preview my work it does not display the video instead just shows a green screen. It does this in both the timeline and the preview window.
View 6 Replies View RelatedI have VSP X4 Ultimate and a Panasonic TM900K. I have been recording mostly in 1080p for the best quality, but I have notice when compared to VLC or another editor, the preview window's quality is very poor. On my 1080P monitor it looks no better than a DVD. This, in of itself, is not a big issue, but it does make it hard to use VSP X4 to do fine video corrections.
The one that is is when I play down-converted videos from VSP X4 (To 7Kbps DVD) the quality is visibly worse than with my other editor. I have been testing on my playstation (just playing the mpeg 2 files via my media server) (the PS3 is set not to up-convert). When I try to do the same thing on my computer using VLC I do not see much of a difference, but VLC is doing a lot to render on the PC (de-interlacing and all).
I am running Autocad LT 2013 Windows 7 on a MacPro OSX using Fusionware. I am working in Model space.
When I want to plot a pdf using either the Plot command and Cute PDF writer, or the Output to PDF command, the preview shows up as a blank page. If I continue to Plot the pdf is written correctly, I just can't preview it to confirm it is correct.
When I try this via the Plot dialog box I get a white screen with a "Preview Job Progress" window and 2 buttons, Help and Cancel, neither of which is clickable. (See attached) I have to right click>Exit to get back to the dialog box. I have been using this method to print pdfs for 5-6 years with no problems.
When I use the Output tab I just get the white screen, which I then close and go back to the tab controls. The same thing happens when I use the Page Setup manager.
I don't know if this is connected but I have lost all ability to send prints to any of the printers in our office. I have downloaded the drivers again to no effect. So now I have to make pdfs, save to a file on our server, switch to the Mac side of the computer, and send the pdf to the printer.
why the image preview comes up blank (white screen) when i am making changes with different fitlers? reduce noise, unsharp mask etc.
View 8 Replies View RelatedWhen importing directly from camera into Light room, after ticking 'Preview' only a blank grey image with file number is displayed and no image
View 2 Replies View RelatedWhen I click the Photoshop CS6 icon from the dock in OSX I now get an initial blank canvas pop up. It's not even a file. How can I get rid of it ?
View 2 Replies View RelatedI am not able to get into my Illustrator CS3 account. A blank window shows when I try to get into the program and I can't get past the blank window. For some reason I am locked out.
View 1 Replies View RelatedIn the Map module I now see only a blank window instead of the map, even for the tagged photos.
PC, Windows 8.1
When I try to use the sharpening filters the preview frame is blank.
View 3 Replies View RelatedI was playing around with my settings and did something that is keeping me from printing. When I go to print preview, the page is blank. I have tried opening up jobs that I successfully printed before and they also show and print blank. Everything looks normal in the work area. I just can't print.
View 14 Replies View RelatedI have try every solution on the autodesk page about the blank activation page problem and it is still not working for me... I have instal autocad and uninstal it multiple time and I always get the error 2738 (probably related) the program is working fine on the trial but it will expired soon. What does the error 2738 mean?
View 1 Replies View RelatedI have a customer that sent me some Illustrator files (.ai) that, when I open them, they open with just a blank window and a box with no fill or stroke around the outside of the document. I am using Illustrator CS4 and I suspect this may be an Illustrator CS6 document but I didn't get any warnings when I opened it so I'm not sure. (I also don't know what version of Illustrator the original creator is using). The document sizes are large (35MB +) so there should be SOME content in them. I've tried making sure nothing is hidden and there are no layers that are turned off. I've also tried opening the files in Acrobat CS4 with no luck.
View 8 Replies View Relatedi found PSP3 to be WAY over my head, and uninstalled it,, only now, using windows movie maker ][5.1] i find the "preview" of text in video is blank. is there some thing about PSP that would have caused this? i reinstalled PSP and it and windows movie maker worked ok, then i removed psp again and the problem has returned. the preview of text in movie in blank/black..in the windows movie maker. the text DOES go on,,
View 3 Replies View RelatedExcuse my awkwardness but I'm self taught on AutoCAD & have managed fine for last few months but have encountered an issue this evening I can't resolve. I've produced drawings, basic they may be, but when preview them the actual drawing area is barely noticable & when export to pdf it practically prints a blank page. I have very simple items in drawing, stockpiles, excavations test locations, and have been producing pdf's fine, even as recently as this morning using the same cadfile. But what ever I've managed to do since then has changed something and I can't resolve the issue.
View 6 Replies View RelatedUsing ACAD 2008, I am having an odd problem where when I print preview/plot this drawing with a viewport the result is a blank page but when I remove the viewport it plots fine.
View 0 Replies View RelatedSome of my imported photos are showing blank in preview mode before I import, reading Preveiw unavailable for this file. Does this mean when I import they wont be imported.
View 1 Replies View Relatedusing PS CS3 on mac 10.8.6 - been fine for years and was OK two days ago. Now when I open it I get a blank window (just the yellow dot upper left) and all else is frozen - can't even quit. Used 'force quit' which works but does NOT say that it is not responding.
Tried rebooting and restarting etc - no change.I know its old but it was fine for my purposes - and I have not changed anything.
I have a problem with the graphics window in Inventor 2012, it happens once a week now, but getting more frequent the graphics window turns white and i cant see anything, i need to re-boot to get it back.
its a new PC, Inventor 2012
Quadro FX 1700, driver 265.70
windows professional 7, 64 bit (service pack1)
I cannot remedy the CS3 blank-screen problem on my Mac (Safari OS) with the suggested fix, as I don't get an error window saying "Never Register" after disconnecting internet and re-launching CS3.
View 2 Replies View RelatedI have been using Photoshop CS3 Extended for quiet a while without problems.Suddenly a blank registration window shows up whenever I need to use the program.Because I am unable to do anything with a blank window I cannot dispose of it and I cannot get past it to complete the startup process so I have to force quit the program.I have registered this version probably more than once so I can't imagine that to be a problem. I always use a partitioned drive with a full copy of the OS and applications installed on it.The same problem exists with that copy of Photoshop as well.
I am using an early Mac Pro with Snow Leopard.
I have uninstalled the program and reinstalled it from my original disc but the same problem still exists.How do I solve the problem of being "locked out" of the application as I am also locked out of work as well ?
Upgrading to a later version is not an option at this point.
I've even tried the old open a new file, and import the file that has no render setting information, and that works maybe 10% of the time.
View 1 Replies View Related